Condition: new, Year of construction: 2025, Dimensions (L/W/H) 750x1400x2000 mm Weight 137 kg Ffjdpfx Agevz Eins Dsw Total power requirement 3 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1000x3000x2200 mm Weight 450 kg Ffjdpfsvz Eh Dsx Ag Djw Total power requirement 11 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 920x2260x2150 mm Weight 300 kg Total power requirement 7,5 kw Ffedpfx Asvz Ehwjg Djw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1600x840x720 mm Weight 210 kg Total power requirement 5,6 kw Ffsdpfx Asvz Ehqeg Djw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 750x2000x2000 mm Fjdpevz Eggofx Ag Dsfw Weight 190 kg Total power requirement 3 kw

Condition: used, Year of construction: 1993, used dust extractor Year of manufacture: 1995 with H 2 filter Motor 2.2 kW Extraction nozzle 200 mm 20 m² filter area Nominal airflow rate 1900 m³/h with automatic pneumatic cleaning with 2 filter cartridges and 2 dust collection bins Ffsdjvymgfspfx Ag Dow Height 2500 mm Length 2200 mm Availability: short notice Location: Röllbach

Condition: like new (used), Year of construction: 2023, machine/vehicle number: DED000302, functionality: fully functional, operating hours: 5 h, power: 5.5 kW (7.48 HP), input voltage: 400 V, input current: 10 A, input frequency: 50 Hz, type of input current: three-phase, volume flow: 5,500 m³/h, noise level: 73 dB, total height: 2,500 mm, total length: 2,650 mm, total width: 1,030 mm, overall weight: 760 kg, extraction nozzle diameter: 250 mm, negative pressure: 2,950 Pa, rotational speed (max.): 3,000 rpm, We are selling a Höcker Polytechnik extraction system, model "Vacumobil VT250-L", year of manufacture 2023. Only 5 operating hours! The unit was used exclusively with our edge banding machine in the showroom and is in 100% working condition. The chip collection containers have never had to be emptied, as the machine was operated only minimally. Fodpfx Agex N Tb He Dsfw ▪ Suitable for installation directly in the working area (depending on dust type) ▪ Low residual dust content < 0.1 mg/m³ (H3) in accordance with TRGS 553 ▪ 100% utilization of thermal energy through air recirculation ▪ Large discharge volume of 3 or 4 tonnes ▪ Online filter cleaning available (at additional cost) ▪ Height less than 2.5 m ▪ PLC control, standard with automatic start and text display ▪ Drive with IE3 efficiency class ▪ Optimized filter cleaning ▪ Integrated automatic fire suppression system ▪ Certified back-pressure flap integrated ▪ No explosion venting required for St1 dusts ▪ BG-certified filter material (separation efficiency 99.95%) ▪ Low energy consumption and high extraction performance The machine is available for immediate collection. No known defects. Warranty has expired.

Condition: used, Total height 6500 mm Floor space 2000 x 2000 mm Outdoor installation Compact filter series Model PKFP – 1 element – 1.92 x 1.92 Shaking filter Overpressure operation Filter hose length 2500 m long – 180 mm diameter - then 105 m2 filter area 2 raw air fans – 2 pipes (diameter 300 mm) 1 x fan KT 300, 15 kW power 6361 m³/h built in 1999 1 x fan S 25 / 300, 7.5 kW power 7400 m³/h, built in 1993 1 x transport fan 6.1 kW, power 57 m³/min, built in 1996 Total approx. 14,000 m3/h volume flow Briquette press Höcker Polytechnik type BrikStar C 3 - 12. 1225 Motor 3.0 kW, briquette diameter 65 mm, output approx. 40-45 kg/h depending on the specific weight of the material. Storage location: Nattheim Fsdpfx Ajvviytsg Dsfw

Condition: used, Year of construction: 2001, Baffle width: 4000 mm. Baffle height: 1000 mm. External dimensions: 4600 x 1500 mm. 2 x 1.5 kW motors. Total nominal flow rate: 7000 m³/h. Right and left exhaust nozzles with 300 mm diameter. Fjdpfx Aovvizkjg Dofw Storage location: Garbsen

Condition: used, Year of construction: 2018, Nominal flow rate: 5087 m³/h Negative pressure Pa: 2300 Motor: 7.5 kW Dimensions: 1080 x 820 x 860 mm Weight: 154 kg Ffsdpfx Agsvxk Ano Djw Storage location: Nattheim

Condition: good (used), Year of construction: 2019, functionality: fully functional, pipe diameter (max.): 450 mm, 15 galvanized steel extraction pipes, each 1 meter long, plus 1 elbow at 90 degrees. Both ends of the pipes have a rim, allowing them to be joined together with a clamp. Ffodpfx Agsylvn To Dow

Condition: new, CATALOGUE NUMBER HZ017 PRODUCT FEATURES As standard, they have mobile containers for sawdust, equipped with a pressure system that allows for tight connection of the container with the machine structure. Thanks to this, it is possible to achieve high negative pressures, without losses at individual connection points. Contaminants from the filter fall directly into hermetic containers with the possibility of quick unloading, which have a special suspension system and mobile wheels that allow for easy and quick transport and maneuvering. Ffedpfxex Ux E Ij Ag Dow The 5.5 kW / 6500 m3/h negative pressure fan, at 2 800 Pa, operates on the principle of a turbine, and the soundproofed design of the fan allows for a significant reduction in the noise emitted during operation. The certified control cabinet allows for constant monitoring of the correctness of operation, thanks to the possibility of any location far from the machine. Standard with integrated fan control system and filter cloth cleaning system ADVANTAGES - new machine - CE certificate - high efficiency - professional Scope of delivery: Polyester filter, 5 microns 2 Containers Drive system Filter cleaning using a vibration system with control TECHNICAL DATA extraction efficiency approx. 8900m3/h engine power 7.5kW rotational speed 3000 rpm voltage 400V, 50Hz extraction nozzle 300mm filter surface 20m2 extraction speed 28m/sec number of filters 45 negative pressure 2800 Pa filter category G filter material polyester dimensions length / width / height 921x2342x2304mm weight 500kg Net price: PLN 18,500 Net price: EUR 4,400 Net price calculated according to the exchange rate of PLN 4.2/EUR (in case of larger exchange rate fluctuations the price may change)

Condition: used, Year of construction: 2005, power: 5.5 kW (7.48 HP), volume flow: 4,400 m³/h, intake manifold diameter: 250 mm, total height: 2,600 mm, total length: 3,500 mm, total width: 1,600 mm, overall weight: 800 kg, Equipment: CE marking, No. 04523 Mobile extraction unit / mobile dust extractor Schuko Vacomat 250 Used, year of construction 2005 Nominal volume flow 4400 m3/h Minimum volume flow 3533 m3/h Negative pressure 2850 Pa Suction nozzle diameter 250 mm Motor power 5.5 kW Nominal speed 2880 rpm Automatic or manual operation Fjdpfx Aeyl Nc Deg Djfw Approved for installation in workrooms Residual dust content level H3, 0.1 mg/m3 Type B1, Suitable for extracting combustible dusts in zone 22 Filter bags made of antistatic polyester needle felt Pneumatic filter regeneration, automatic or manual Automatic extinguishing device with powder extinguisher GS-tested CE-compliant Including electrical connection cable with 32 A plug Transport dimensions approx. 3500 x 1600 x 2600 mm LWH Weight approx. 800 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: excellent (used), Dust suction hood 350 mm Motor output 30 kW tube diameter 320 mm pipes ca. 12 lfm Ffodoyk Ifbjpfx Ag Djw Position extraction fan and pipes for woodworking or similar.

Year of construction: 2026, condition: new, The AL-KO Sanding table AST 1.5 BASIC is the entry-level model for the AL-KO sanding table program. It is certified according to GS-HO-11 and bears the seal "Wood dust tested according to BGI 739-1". It is therefore suitable for manual grinding as well as for machining workpieces with manual work machines. Ffsdpfxefyadbs Ag Dow The grinding table is made of galvanized steel sheet. The workpiece support consists of a removable beech wood grate. It is accessible from all 4 sides. So that several people can work at the same time. Thanks to the sturdy, structurally stiffened construction, workpieces with a weight of up to 150 kg can be processed. In order to adjust the work surface of the AL-KO AST 1.5 BASIC to the required working height, it is equipped as standard with a mechanical height adjustment. The height adjustment is done without any tools by adjusting the feet in scaled grid dimensions. In addition, all feet can be adjusted in millimeters according to the respective ground conditions. The extraction trough is optimized in terms of flow technology. Due to the funnel-shaped design of the trough with integrated air duct, the air stream is directed to the intake socket. Depending on the extraction capacity required, the connection to the customer-specific extraction system can be made via a connection piece Ø 140 or Ø 160 mm. The bending of the machining surface on both two longitudinal sides also allows machining of workpieces on the end face The suction grilles are aligned with the flow connection to the suction port and thus guarantee an optimal extraction result. For cleaning work inside the sanding table, the slat grating can be lifted off and the air duct can be removed by loosening a few screws. The sanding table is delivered pre-assembled, only the feet have to be mounted and adjusted to the required working height. Tender specification AST 1.5 BASIC page 2 from 2 Technical data AST 1.5 BASIC: - Intake socket 140/ 160 mm - Required suction performance 1.500 m³/h - Vacuum on socket at 22 m/s 1.000 Pa bei Ø 140 mm 700 Pa bei Ø 160 mm - Working height adjustable 735 – 1.015 mm - Working surface (W x L) 946 x 1.500 mm - Dimension (W x L) 1.000 x 1.600 mm - Weight approx. 73 kg

Condition: new, Year of construction: 2025, Suction port diameter: 1 x 200, 3 x 100mm Nominal volume flow: 1760 m³/h Residual dust content: 0.1 mg/m³ Chip collection volume: 240l Filter cleaning: motorized motor power: 3 kW Noise level: 78dB(A) Fodpfx Ajhpmawog Defw Machine length: 1340 mm Machine width: 900 mm Machine height: 2170 mm Weight: 178 kg

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, volume flow: 9,400 m³/h, power: 15 kW (20.39 HP), input frequency: 50 Hz, Three fans are offered; the price is for one fan each. All three fans are identical in design. Fedpsxcv Ndefx Ag Djfw

Condition: used, Year of construction: 2023, Used system Year of manufacture: 2023 Condition: As new, system has only a few operating hours Equipment and technical specifications: - Stationary clean air filter system ECO JET DUO 6 XL ZRS 2 x 7.5 kW - For extraction of wood dust and wood chips - Fan: 2 x 7.5 kW - Airflow rate: 10,000 m³/h at - Negative pressure: 2,700 Pa (total) / 2,200 Pa (static) - Filters: 80 pcs à 2.50 m - BIA category M, electrically conductive - Filter area: 77.6 m² - Filter surface load: 129 m³/(m²x h) - Filter cleaning: AL-KO OPTI JET® - Pressure relief panels: 0.84 m² (bursting discs) - Lower section with discharge chute and rotary valve Dry discharge with C-coupling Comprising: - ECO JET DUO 6 UPPER PART, 2 x 7.5 kW: Clean air filter system; 2 x 7.5 kW fan; AL-KO OPTI-JET filter cleaning; Incl. pressure relief panels and dry discharge with C-coupling; without filters and control; Incl. pressure sensors - ECO JET DUO 6 ZWR XL - 1100 MM: Intermediate ring for expansion or unit height increase with 2 inlet connections for suction nozzles - Base frame with discharge chute and integrated rotary valve 960/1 FG: For disposal of chips via on-site transport fan into existing silo or similar Transport pipe DN 200 mm, approx. 1,260 mm long under rotary valve, connection to transport pipe to be provided by buyer Rotary valve certified according to ATEX Directive 94/9/EC Technical data ZRS 960/1FG: CE 0588 Ex II 1D/- (Unit for indoor/outdoor); EX D (protection system); FSA 11 ATEX 1614X Motor output: 0.18 kW / 0.78 A 3 Ph / 400 V / 50 Hz Protection class / mounting: IP 54 / B3 Insulation class: F Speed: 41 rpm Discharge capacity*: 15,744 l/h* Number of cells: 7 pcs Inlet/outlet cross-section: 960 x 250 mm / 960 x 208 mm Dimensions (W x D x H): 1,100 x 605 x 330 mm Temperature range: up to 50°C *depending on material - FILTER & SUPPORT CAGE 2.5 / CAT M EL WHITE FILTER ECO JET DUO 6: 80 pcs required Filter BIA category 'M' – electrically conductive; 2.50 m long, incl. support cages; 77.6 m² filter area - Inlet nozzle 400 mm: with backdraft damper in rectangular duct - ECO JET backdraft damper 910x346x500 - Control cabinet – AL-KO Control System: BASIC CONTROL ACS II WITH TOUCHSCREEN DISPLAY: Basic unit for cascade control of 2 fans via frequency inverter (FU) up to max. 37 kW; corresponding performance module and controls as well as the frequency inverter are included in the basic unit; the FU is installed in the control cabinet Cascade control with FU handover: Fan 1 operates on the frequency inverter; when threshold is reached, switches to mains operation; Fan 2 takes over FU and regulates as needed; Basic functions: Control voltage 24 V Touchscreen display, ST 1200 control, Sitop Power supply, collective fault warning Display of fault message as plain text on display and collective fault indicator on the door Manual discharge start via display button Start filter cleaning via differential pressure Manual filter cleaning start via button Post-cleaning Fire monitoring Fodoyk I U Aopfx Ag Djfw

Condition: used, Year of construction: 1996, Suction nozzle diameter: 160 mm Maximum volumetric flow rate: 1770 m³/h Rated volumetric flow rate: 1448 m³/h Ffjdpex Edmpofx Ag Dsw Airflow monitoring: differential pressure indicator Vacuum: 1570 Pa Filter area: 10.5 m² Residual dust content: less than 0.2 mg/m³ Sound pressure level: Chip sack volume: Filter cleaning: pneumatic, jet cleaning Motor power: 2.2 kW Machine length: 1600 mm Machine width: 700 mm Machine height: 2200 mm Weight:

Condition: excellent (used), Year of construction: 2000, For sale is a Höcker Polytechnik Vacumobil system. The unit is fully functional and can be inspected and tested on site. The sale is carried out on behalf of a customer. Machine location: Friedeburg region. Machine details: - Year of manufacture: 2000 - Extraction diameter: 300 mm - Motor power: 7.5 kW - Nominal air flow rate: 5320 m3/h - Mobile on castors Price is net, plus VAT. An invoice for the machine will be issued. Shipping of the machine can be arranged at additional cost. Ffodpfsylciwex Ag Dow Feel free to contact us with any questions or if you are interested! Your JG Holztechnik Team from 26188 Edewecht.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, volume flow: 6,000 m³/h, intake vacuum (max.): 2,700 mbar, suction capacity: 5,100 m³/h, intake manifold diameter: 300 mm, filter area: 28 m², noise level: 75 dB, actuation type: electric, overall weight: 900 kg, Equipment: CE marking, documentation/manual, Höcker extraction unit in very good condition, clean-air system designed for installation in the workshop (recirculation principle with no heat energy losses!). Filter renewal (total area 28 m²) with support baskets and fire extinguisher service scheduled for 2025. Optionally available with ducting (diameter 300 mm) up to connection point at the central extraction system. Mobile design. Additional features: Pneumatic jet cleaning (compressed air connection 4.5-5 bar), extinguishing device with dry powder extinguisher, chip/dust disposal via 4 mobile collection containers, simple insertion and removal of polyester needle felt filters (72 filter bags with support baskets). Dimensions: 3210 mm long, approx. 1200 mm deep. Fjdpfxoymw Udo Ag Dofw Additional information available on request.

Condition: good (used), Code: 0306 Brand: VM Model: 2/18 Suction system with 18 sleeves and 2 collection bags for carpentry workshops, furniture factories, sawmills, woodworking shops and various Technical data: N° 18 filtering sleeves N° 2 collection bags Motor Hp 7,5 Electrical panel Overall dimensions: mm 2800 x 1200 x 3200 h Fjdsymfiijpfx Ag Defw

Condition: used, Dust suction hood 160 mm Motor output 1,5 kW Dimensions (L/W/H) 1.220 x 650 x 3.270 mm Fedpfx Agsyi Ht Us Defw

Condition: used, Extraction installation Riedex MD-280 Connection diameter 300mm Filter Bags 48 Pieces Fjdpfewng Nnex Ag Dofw Capacity 6000m³/h Electric knock motor Main fan 11kW Transport fan 4kW Filter bags need to be replaced complete with control box and +/- 40m pipes. Total dimensions filter box: 1200x3400x3400mm - Documentation available: No - CE certificate present: No - Number of filter bags [pcs]: 48 - Connection diameter [mm]: 300 - Main fan power [kW]: 11.0 - Control cabinet present: Yes - Shaking system: Yes - Collection container: Yes - Transport fan included: Yes - Transport fan power [kW]: 4.0 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2007, Extraction installation Riedex MD-300L Connection diameter 300mm Filter Bags 2000x200mm, 48 Pieces Capacity 6000m³/h Electric shaking motor Including transport fan 4kW Overall dimensions: 2000x3000x3600mm (LxWxH) - Year: 2007 - Documentation available: No - CE certificate present: No Fsdpfowng T Tex Ag Defw - Number of filter bags [pcs]: 48 - Filter length [mm]: 2000 - Filter diameter [mm]: 200 - Connection diameter [mm]: 300 - Shaking system: Yes - Collection container: Yes - Transport fan included: Yes - Transport fan power [kW]: 4.0 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels