Used Mobile Suction Unit for sale (35,421)

Condition: ready for operation (used), A Kiekens extraction and filtration system is available. Filter medium: polyester needle felt, max. filter area: approx. 12m³, max. air volume flow: 3400m³/h, max. residual dust content: 1mg/m³, dust container volume: 55l, machine dimensions X/Y/Z: approx. 800mm/800mm/2500mm, weight: approx. 300kg. Documentation available. An on site inspection is possible. Gtsdpfx Ajyttwhjaljw

Condition: new, Year of construction: 2024, Suction nozzle diameter: 150 mm Flow rate: 3000 m³/h Negative pressure: 3500 Pa Air velocity: 47 m/s Chip bag volume: 2 x 0.1426 m³ Filter area: 5 m² Filter cleaning: manual Motor power: 1.5 kW Dimensions: Weight: Gtsdpsknyhhofx Aalow

Condition: new, Year of construction: 2025, Suction nozzle diameter: 260mm Nominal volume flow: 7700 m³/h scavenging bag volume: 2 x 290 l Gtodpfx Aashw I Szelew Filter cleaning: manual Engine power: 4,8 kW Dimensions: 1900 x 670 x 2800 mm (L x W x H) Weight: 88 kg

Condition: new, Year of construction: 2025, Suction nozzle diameter: 120 mm Flow rate: 1900 m³/h Vacuum pressure: 2500 Pa Chip bag volume: 1 x 1426 m³ Filter cleaning: manual Gtjdsh Ekx Iepfx Aaljw Motor power: 1.1 kW Dimensions: 1000 x 500 x 1800 mm (L x W x H) Weight: 39 kg

Condition: used, Hydraulic unit for mobile clinching tongs or mobile shaper ECKOLD type HA 500 / 2 Serial No. 737 / 783 Year of construction 1991 Hydraulic unit type HA 500 / 2 Operating pressure 50 - 500 bar adjustable Delivery rate 2.6 l/min Tank capacity 16 liters Engine power (hydraulics) 3 kW Rated power 3.1 kW Mains connection 380 Volt, 50 Hz. Control voltage 24 Volt, DC - Pressure line with screw coupling - With HAWE GS 2-2 solenoid valve - Mobile on 4 swivel castors Weight without hydraulic oil 125 kg good condition Gtsdpfxsquzfcs Aalow

Condition: used, Year of construction: 2005, power: 5.5 kW (7.48 HP), volume flow: 4,400 m³/h, intake manifold diameter: 250 mm, total height: 2,600 mm, total length: 3,500 mm, total width: 1,600 mm, overall weight: 800 kg, Equipment: CE marking, No. 04523 Mobile extraction unit / mobile dust extractor Schuko Vacomat 250 Used, year of construction 2005 Nominal volume flow 4400 m3/h Minimum volume flow 3533 m3/h Negative pressure 2850 Pa Suction nozzle diameter 250 mm Motor power 5.5 kW Nominal speed 2880 rpm Automatic or manual operation Approved for installation in workrooms Residual dust content level H3, 0.1 mg/m3 Type B1, Suitable for extracting combustible dusts in zone 22 Filter bags made of antistatic polyester needle felt Pneumatic filter regeneration, automatic or manual Automatic extinguishing device with powder extinguisher GS-tested CE-compliant Including electrical connection cable with 32 A plug Transport dimensions approx. 3500 x 1600 x 2600 mm LWH Weight approx. 800 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Godpfsyl Nc Dex Aalotw Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: used, Year of construction: 2021, overall weight: 200 kg, input voltage: 400 V, total width: 800 mm, total length: 1,350 mm, total height: 1,500 mm, volume flow: 216 m³/h, space requirement height: 1,500 mm, space requirement width: 800 mm, space requirement length: 1,350 mm, filter area: 2 m², negative pressure: 31,500 Pa, power: 3 kW (4.08 HP), transport height: 1,500 mm, transport length: 1,350 mm, transport width: 800 mm, tank capacity: 80 l, No. 04520 Mobile extraction unit / mobile dust extractor ESTA WHISPERSOG 3.0 FM Unused, year of construction 2021, in new condition Industrial vacuum cleaner for cleaning work and machine extraction The WHISPERSOG high vacuum cleaners work more quietly than conventional industrial vacuum cleaners with the same performance. They are designed for continuous operation and can be used not only as industrial vacuum cleaners, but also as mobile dust extractors for direct extraction on machines. By using permanent filter cartridges, operating costs can be significantly reduced compared to disposable filters. The dust produced can be easily disposed of using the patented tipping device. Areas of application: Removal of coarse, fine and free-flowing dust during cleaning work / Direct extraction of machines in continuous operation Motor power 3 kW Electrical connection 400 V Maximum negative pressure 31500 Pa Maximum air volume flow 216 m3/h Extraction nozzle diameter 50 mm Filter surface 2m2 Dust collection container 80 liters Potential-free contact for automatic activation when machine is started Including electrical connection cable with 16 A plug, 10 waste bags and technical documentation Transport dimensions approx. 1350 x 800 x 1500 mm LWH Weight approx. 200 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Godpfxsylb Ixs Aalstw Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: good (used), overall weight: 1,300 kg, power: 96.9 kW (131.75 HP), Hotmobil MKZ 48 Air-Cooled Chiller 96.9 kW Gsdpfxeqrq Sze Aaljtw Manufacturer: Hotmobil MKZ 48 Type: Mobile Chiller Air-Cooled Capacity: 96.9 kW Weight: 1300 kg Financing through our bank is also available. komplett-konzept.leasingo.de Find more items in other sizes—new and used—in our shop! International shipping costs on request!

Condition: used, Year of construction: 2021, overall weight: 200 kg, input voltage: 400 V, total width: 800 mm, total length: 1,300 mm, total height: 1,600 mm, volume flow: 216 m³/h, space requirement height: 1,600 mm, space requirement width: 800 mm, space requirement length: 1,300 mm, filter area: 2 m², negative pressure: 31,500 Pa, power: 3 kW (4.08 HP), transport height: 1,600 mm, transport length: 1,300 mm, transport width: 800 mm, tank capacity: 80 l, No. 04519 Mobile extraction unit / mobile dust extractor ESTA WHISPERSOG 3.0 FM Unused, year of construction 2021, in new condition Industrial vacuum cleaner for cleaning work and machine extraction The WHISPERSOG high vacuum cleaners work more quietly than conventional industrial vacuum cleaners with the same performance. They are designed for continuous operation and can be used not only as industrial vacuum cleaners, but also as mobile dust extractors for direct extraction on machines. By using permanent filter cartridges, operating costs can be significantly reduced compared to disposable filters. The dust produced can be easily disposed of using the patented tipping device. Areas of application: Removal of coarse, fine and free-flowing dust during cleaning work / Direct extraction of machines in continuous operation Motor power 3 kW Electrical connection 400 V Maximum negative pressure 31500 Pa Maximum air volume flow 216 m3/h Extraction nozzle diameter 50 mm Filter surface 2m2 Dust collection container 80 liters Potential-free contact for automatic activation when machine is started Including electrical connection cable with 16 A plug, 10 waste bags and technical documentation Gtedpsyibg Tofx Aalsw Transport dimensions approx. 1300 x 800 x 1600 mm LWH Weight approx. 200 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: like new (used), functionality: fully functional, machine/vehicle number: Nilfisk Industriesauger R104 V 4031600000, This machine delivers serious power! R104 X Product number: 4031600006 The R-Series industrial vacuum cleaners are designed to extract and compact offcuts, cutting dust, and all types of production waste (plastic, paper fragments, or fabric trimmings), enabling easy reintegration into the recycling process. Originates from a cleanroom plastics granulate production Godpfxow D Upzs Aalstw Industrial vacuum cleaner for compressible materials The R-Series industrial vacuum cleaners are specifically engineered to extract and compact offcuts, cutting dust, and production waste (plastic, paper fragments, or fabric offcuts), so that materials can be efficiently returned to the recycling stream. • Reduces downtime through continuous cleaning • Compacts and enables easy removal of vacuumed material • Dust-free working environments • Enables recovery of production waste • Flexible with various power ratings • Maintenance-free container sizes • Easy monitoring • Allows for unattended operation.

Condition: used, Year of construction: 1999, Schwertfalzwerk / Mobile Knife Folding Unit GUK ZG 500 Year 1999 Einlaufbreite / Infeed width min. 150mm - max. 480mm Einlauflänge / Infeed length min. 80mm - max. 320mm Einlaufhöhe / Infeed height min. 450mm - max. 650mm Geschwindigkeit / Speed min. 40m/min - max. 160m/min Produktivität / Productivity 20.000 cycles/h Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Godpfxjun Nn De Aaljtw On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 2008, machine/vehicle number: 1, Schwertfalzwerk Eigensteuerung - Mobile Knife Folding Unit SelfControl MBO Z6 Year 2008 - Serial-No. 101682080415 Einlaufbreite / Infeed width min. 150mm - max. 480mm Einlauflänge / Infeed length min. 80mm - max. 320mm Einlaufhöhe / Infeed height min. 450mm - max. 650mm Geschwindigkeit / Speed min. 20m/min - max. 160m/min Produktivität / Productivity 15.000 cycles/h Antriebsregelung / Drive control MC Control with potentiometerAuf Anfrage Koppelbox MC Control auf Navigator / On request Couple Box MC Control to Navigator Gtodpfsivbbzox Aaljw Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1993, machine/vehicle number: 43930306, Mobiles Schwertfalzwerk Eigensteuerung / Mobile Knife Folding Unit SelfControl MBO Z6Year 1993 - Serial-No. 43930306-A Einlaufbreite / Infeed width min. 150mm - max. 480mm Einlauflänge / Infeed length min. 80mm - max. 320mm Einlaufhöhe / Infeed height min. 450mm - max. 650mm Geschwindigkeit / Speed min. 20m/min - max. 210m/min Produktivität / Productivity 25.000 cycles/h Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Gjdpfx Asv D Rqvsalotw

Condition: used, Year of construction: 2017, power: 2.2 kW (2.99 HP), input voltage: 400 V, volume flow: 1,593 m³/h, suction capacity: 1,593 m³/h, filter area: 9.5 m², total height: 2,200 mm, total length: 1,800 mm, total width: 1,000 mm, overall weight: 350 kg, nominal flow rate: 1,447 m³/h, negative pressure: 2,200 Pa, nominal power: 2.2 kW (2.99 HP), space requirement height: 2,200 mm, space requirement length: 1,800 mm, space requirement width: 1,000 mm, transport length: 1,800 mm, transport width: 1,000 mm, transport height: 2,200 mm, tank capacity: 240 l, No. 04517 Mobile extraction unit / mobile dust extractor Schuko Vacomat 140/160 XPe Unused, year of construction 2017, in new condition Extraction diameter 140 / 160 mm, can be changed using a reducer Residual dust value H3, 0.1 mg/m3 Suitable for extracting combustible dusts The Vacomat 140/160 XPe mobile dust extractor is ideal for single machine extraction. Air volumes of up to 1593 m3/h can be conveyed with this extraction system using the vacuum method, e.g. for dedusting sliding table saws, jointers or thicknessers. The dust/chip mixture is discharged into a dust-tight chip collection container (240 l) with an inserted plastic bag. A vacuum channel holds the plastic bag securely in the collection container. Viewing windows make it easier to check the fill level. The Vacomat 140/160 XPe mobile dust extractor automatically monitors its extraction performance via a pressure cell and guarantees maximum operational safety. In the Vacomat 140/160 XPe, a vibrating motor cleans the filter bags electro-mechanically. No connection to compressed air and therefore no compressor is required. It can be controlled via the query of the woodworking machine using potential-free contacts. The Vacomat 140/160 XPe mobile dust extractor is fitted with patented SchukoCone filter bags as standard. The SchukoCone filter bags are particularly suitable for fine dusts. Nominal volume flow 1447 m3/h Vacuum pressure 2200 Pa Motor power 400 V, 2.2 kW Filter area 9.5 m2 Filter material dust class “M” CE-compliant GS-tested Complete technical documentation available Transport dimensions approx. 1800 x 1000 x 2200 mm LWH Weight approx. 350 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Gtedpfx Aasygbbholsw Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: ready for operation (used), Wieland WTR 3100/EX vacuum, electric, EX version. Gtjdpfx Asyk Itxjalow

Condition: ready for operation (used), Main pipe connection diameter: 120mm, pressure difference: 8000Pa, volume flow: 1200m³/h, connections: 3, container volume: 175l, machine dimensions X/Y/Z: approx. 1500mm/800mm/2300mm. An on-site inspection is possible. Gtsdpfx Aajxph Rtolew

Condition: ready for operation (used), Year of construction: 2019, A filter system Teka is available. Air flow rate: 5000m³/h, motor power: 4kW, machine dimensions X/Y/Z: approx. 700mm/1000mm/2700mm. Includes control cabinet/control unit and a few folding pipes. Documentation available. An on-site inspection is possible. Gtsdpfx Ajw Ni I Ijalew

Condition: ready for operation (used), Year of construction: 2019, An unused Kemper extraction system for room ventilation in the production area is available. Filter class: H10, Filter method: Storage filter, Filter material: Nano-Cellulose, Separation efficiency: 99.9%, Dust class: M, Volume flow: 5000m³/h, Motor power: 3.35kW, Filter area: 50m². Machine diameter: approx. 1200mm, machine height: approx. 2700mm, weight: approx. 420kg, operating hours: 1h. Documentation available. On-site inspection is possible. Gedjwrrrcjpfx Aalstw

Condition: ready for operation (used), Year of construction: 2018, Suction capacity: 3000m³/h, blower capacity (free-blowing): 4000m³/h, differential pressure: 1750Pa, dust storage capacity: 95l, filter cartridges: 2, machine dimensions X/Y/Z: approx. 1050mm/850mm/3000mm, weight: approx. 230kg. Documentation available. An on-site inspection is possible. Godpfx Aexguc Dsaletw

Condition: used, • Can rotate and tilt Gtedpfx Ajyf Ecmjalow • Automatic suction system • Equipped with air cylinder • 8 suction pads • 4 adjustable • Load capacity – 150 kg • Weight – 170 kg

Condition: new, Year of construction: 2025, Raw air extraction unit ASA 163 With standard undercarriage Dimensions and weights Chip collection volume 175 l Nominal width outside suction socket inlet 160 mm Length approx. 1096 mm Width/depth approx. 648 mm Height approx. 2300 mm Weight approx. 40 kg Electrical data Supply voltage 400 V Mains frequency 50 Hz Filter Filter area 2.2 m² Noise emission Sound pressure level max. 83 dB(A) Volume flow Nominal volume flow 2200 m³/h For milling, planing and sawing chips (no dust) Substantially reduced dust content due to BIA-tested filter material with high separation efficiency Housing parts and impellers made of high-strength special plastic Quick release fasteners for filter and chip bags for unproblematic maintenance Robust, high-quality design Easy to move due to swivel castors Low power consumption Suction units comply with dust class L Scope of delivery: System body with mounted fan unit Filter bag / extraction unit chip bag / extraction unit Godpfx Aaohk S S Eolotw without suction hose

Condition: used, Year of construction: 2012, used extraction unitYear of manufacture: 2012Rated capacity: 2789 m³/hFilter surface: 1.8 m²Max. negative pressure: 1668 PaChip collection volume: 160 lMotor: 1.1 kW, 400 VExtraction port: 1 x 120 mm, 1 x 100 mmAvailability: short-termLocation: Hochheim Gsdpfx Aaex Rv Dtjletw

Condition: excellent (used), Here we offer a used Datona mobile sandblasting unit. Datona mobile sandblasting unit DUO - 74 liters SKU DT-55212 Advantages and disadvantages: 2.5 m long hose for a long reach Easy to switch between blasting agents thanks to the mixing valve When using soda, the surface of the workpiece is not damaged Description: This mobile sandblasting machine is used for removing paint and rust. Thanks to the two boilers, you can choose from two different blasting media. The mobile sandblasting unit works with a pressure of 4 to 8 bar and requires a compressor with a suction capacity of at least 350 l/min. Gtsdpfxsqcuvws Aalow Double boiler: If blasting with soda or calcium carbonate does not achieve the desired result, simply try a different blasting agent. For a more effective effect, it is also possible to use both blasting agents at the same time. With the sandblaster, you have a practical machine in your home. With the help of the special mixing valve, you can use soda to easily and gently remove paint from steel, stainless steel, chrome, aluminum or polyester. A major advantage of blasting with fine soda is that the surface of the object to be of the object to be blasted is not damaged. You don't even have to remove rubber seals, chrome parts or glass. This saves a lot of time! The mobile sandblasting unit can be used both in the workshop as well as on site. Attention: The one boiler is only suitable for soda and calcium carbonate!!! ✓ Duo sandblasting unit ✓ 74 liter boiler capacity ✓ Air consumption is around 350 l/min Technical data: SKU DT-55212 Weight 33 kg Suitable blasting material Aluminum silicate Dato-Blast calcium carbonate soda Blasting cabinet connection 1/4" Max. Pressure 2 - 6 bar Minimum air consumption 350 l/min Min. compressor tank capacity 100 liters Type: DT-55212 Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, Dimensions (LxBxH): 135 x 55 x 102 cm Boe-Therm Temp 300 – Oil Heating Unit Serial number: 83054 Type: Temp 300-36-4 VE General Data - Medium: Thermal oil - Oil capacity: 98 liters - Max. temperature: 300 °C - Heating capacity (kW): 36 kW - Voltage: 3 x 400 V / 24 V - Frequency: 50 Hz - Power consumption: approx. 54.8 A - Control system: Electronic panel with digital display and control buttons - Safety features: Overtemperature, oil level, and pressure monitoring Applications - Temperature control in plastics industry (injection moulding, extrusion) Gtsdexpva Aspfx Aalew - Metal processing (heating systems, forming presses) - Woodworking (veneer presses, laminating presses) - Other processes requiring stable and high temperatures Function The unit heats thermal oil and circulates it through external circuits (such as moulds, press plates, or installations). This ensures a constant temperature up to 300 °C, with high precision and reliability. - Documentation available: No - CE certificate present: No - Serial number: 83054 - Transport dimensions: 1350mm x 550mm x 1020mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), functionality: fully functional, Year of construction: 2002, Equipment: CE marking, GIPOREC R110 FDR tracked mobile plant comprising a feed hopper of approximately 10 m³, a vibrating feeder, a pre-screen with divergent bar grate, an impact crusher with 1100 x 900 mm opening, a discharge conveyor beneath the crusher, a fines discharge conveyor, a CAT diesel engine, and a hydraulic unit for auxiliary power requirements. Gsdpfx Aaox Tr Itsljtw