Condition: good (used), Year of construction: 1994, power: 2.2 kW (2.99 HP), Nestro Extraction System Extraction nozzle D = 160 mm Motor power: 2.2 kW Filter area: approx. 11.5 m² External dimensions (L x W x H): approx. 1350 x 860 x 1960 mm Iodpeytpigsfx Aalstd Weight: approx. 240 kg One chip bin / approx. 185 l Max. nominal air flow: 1780 m³/h Associated negative pressure: approx. 2400 Pa All details are without guarantee. This information has been taken from a brochure.

Condition: used, Total height 6500 mm Floor space 2000 x 2000 mm Outdoor installation Compact filter series Model PKFP – 1 element – 1.92 x 1.92 Shaking filter Overpressure operation Filter hose length 2500 m long – 180 mm diameter - then 105 m2 filter area 2 raw air fans – 2 pipes (diameter 300 mm) 1 x fan KT 300, 15 kW power 6361 m³/h built in 1999 1 x fan S 25 / 300, 7.5 kW power 7400 m³/h, built in 1993 1 x transport fan 6.1 kW, power 57 m³/min, built in 1996 Total approx. 14,000 m3/h volume flow Briquette press Höcker Polytechnik type BrikStar C 3 - 12. 1225 Motor 3.0 kW, briquette diameter 65 mm, output approx. 40-45 kg/h depending on the specific weight of the material. Itjdpfx Ajvviytsalod Storage location: Nattheim

Condition: used, Year of construction: 2001, Baffle width: 4000 mm. Baffle height: 1000 mm. External dimensions: 4600 x 1500 mm. 2 x 1.5 kW motors. Total nominal flow rate: 7000 m³/h. Right and left exhaust nozzles with 300 mm diameter. Storage location: Garbsen Isdjvvizkspfx Aalstd

Condition: used, Year of construction: 2018, Nominal flow rate: 5087 m³/h Negative pressure Pa: 2300 Motor: 7.5 kW Dimensions: 1080 x 820 x 860 mm Weight: 154 kg Storage location: Nattheim Isdpfxovxk Ane Aalotd

Condition: used, Year of construction: 2005, power: 5.5 kW (7.48 HP), volume flow: 4,400 m³/h, intake manifold diameter: 250 mm, total height: 2,600 mm, total length: 3,500 mm, total width: 1,600 mm, overall weight: 800 kg, Equipment: CE marking, No. 04523 Mobile extraction unit / mobile dust extractor Schuko Vacomat 250 Used, year of construction 2005 Nominal volume flow 4400 m3/h Minimum volume flow 3533 m3/h Negative pressure 2850 Pa Suction nozzle diameter 250 mm Motor power 5.5 kW Nominal speed 2880 rpm Automatic or manual operation Approved for installation in workrooms Itjdpfoyl Nc Dsx Aalsd Residual dust content level H3, 0.1 mg/m3 Type B1, Suitable for extracting combustible dusts in zone 22 Filter bags made of antistatic polyester needle felt Pneumatic filter regeneration, automatic or manual Automatic extinguishing device with powder extinguisher GS-tested CE-compliant Including electrical connection cable with 32 A plug Transport dimensions approx. 3500 x 1600 x 2600 mm LWH Weight approx. 800 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: like new (used), Year of construction: 2023, machine/vehicle number: DED000302, functionality: fully functional, operating hours: 5 h, power: 5.5 kW (7.48 HP), input voltage: 400 V, input current: 10 A, input frequency: 50 Hz, type of input current: three-phase, volume flow: 5,500 m³/h, noise level: 73 dB, total height: 2,500 mm, total length: 2,650 mm, total width: 1,030 mm, overall weight: 760 kg, extraction nozzle diameter: 250 mm, negative pressure: 2,950 Pa, rotational speed (max.): 3,000 rpm, We are selling a Höcker Polytechnik extraction system, model "Vacumobil VT250-L", year of manufacture 2023. Only 5 operating hours! The unit was used exclusively with our edge banding machine in the showroom and is in 100% working condition. The chip collection containers have never had to be emptied, as the machine was operated only minimally. ▪ Suitable for installation directly in the working area (depending on dust type) ▪ Low residual dust content < 0.1 mg/m³ (H3) in accordance with TRGS 553 ▪ 100% utilization of thermal energy through air recirculation ▪ Large discharge volume of 3 or 4 tonnes ▪ Online filter cleaning available (at additional cost) ▪ Height less than 2.5 m ▪ PLC control, standard with automatic start and text display ▪ Drive with IE3 efficiency class ▪ Optimized filter cleaning ▪ Integrated automatic fire suppression system ▪ Certified back-pressure flap integrated ▪ No explosion venting required for St1 dusts ▪ BG-certified filter material (separation efficiency 99.95%) ▪ Low energy consumption and high extraction performance The machine is available for immediate collection. Isdpfex N Tb Hex Aaljtd No known defects. Warranty has expired.

Condition: good (used), Year of construction: 2019, functionality: fully functional, pipe diameter (max.): 450 mm, 15 galvanized steel extraction pipes, each 1 meter long, plus 1 elbow at 90 degrees. Both ends of the pipes have a rim, allowing them to be joined together with a clamp. Ijdsylvn Tepfx Aalstd

Condition: excellent (used), Dust suction hood 350 mm Itjdjyk Ifbspfx Aaljd Motor output 30 kW tube diameter 320 mm pipes ca. 12 lfm Position extraction fan and pipes for woodworking or similar.

Condition: new, CATALOGUE NUMBER HZ017 PRODUCT FEATURES As standard, they have mobile containers for sawdust, equipped with a pressure system that allows for tight connection of the container with the machine structure. Thanks to this, it is possible to achieve high negative pressures, without losses at individual connection points. Contaminants from the filter fall directly into hermetic containers with the possibility of quick unloading, which have a special suspension system and mobile wheels that allow for easy and quick transport and maneuvering. The 5.5 kW / 6500 m3/h negative pressure fan, at 2 800 Pa, operates on the principle of a turbine, and the soundproofed design of the fan allows for a significant reduction in the noise emitted during operation. The certified control cabinet allows for constant monitoring of the correctness of operation, thanks to the possibility of any location far from the machine. Standard with integrated fan control system and filter cloth cleaning system ADVANTAGES - new machine - CE certificate - high efficiency - professional Scope of delivery: Polyester filter, 5 microns 2 Containers Drive system Filter cleaning using a vibration system with control TECHNICAL DATA extraction efficiency approx. 8900m3/h engine power 7.5kW rotational speed 3000 rpm voltage 400V, 50Hz extraction nozzle 300mm filter surface 20m2 extraction speed 28m/sec number of filters 45 negative pressure 2800 Pa filter category G filter material polyester Isdpfsx Ux E Isx Aalotd dimensions length / width / height 921x2342x2304mm weight 500kg Net price: PLN 18,500 Net price: EUR 4,400 Net price calculated according to the exchange rate of PLN 4.2/EUR (in case of larger exchange rate fluctuations the price may change)

Condition: new, Year of construction: 2026, Efficient Sawdust and Dust Removal Sawdust extraction with a Big Bag is an effective solution for collecting shavings, sawdust, and dust generated during woodworking. It improves workplace cleanliness and air quality in workshops and production facilities. Iodpfx Aeyu H Rkjaletd Capacity-Effective Waste Collection System The large Big Bag allows for the collection of significant amounts of waste without frequent emptying, streamlining workflow and reducing downtime. Sturdy Construction and Versatile Applications The durable design and compatibility with a variety of woodworking machines make this device ideal for carpentry shops, furniture factories, and workshops where order, safety, and productivity are key. Practical Support for Daily Production This reliable solution facilitates maintaining a clean and safe work environment, increases operator comfort, and supports the smooth, continuous operation of machines in professional applications. Capacity: 11,300 m³/h Motor power: 11 kW (15 HP), 3,000 rpm Speed: 40 m/s Filter dimensions: Ø160 x 940 mm Number of filters: 60 Filtration area: 30 m² Swarf collection: 2 x 1,250 liter big bags (total: 2,500 liters) Connection diameter: Ø355 mm Dimensions: 1,200 x 3,310 x 3,560 mm Weight: 820 kg

Condition: new, Year of construction: 2026, Efficient Sawdust and Dust Removal Sawdust extraction with a Big Bag is an effective solution for collecting shavings, sawdust, and dust generated during woodworking. It improves workplace cleanliness and air quality in workshops and production facilities. Capacity-Effective Waste Collection System The large Big Bag allows for the collection of significant amounts of waste without frequent emptying, streamlining workflow and reducing downtime. Sturdy Construction and Versatile Applications The durable design and compatibility with a variety of woodworking machines make this device ideal for carpentry shops, furniture factories, and workshops where order, safety, and productivity are key. Isdpfsyu H Ipjx Aaljtd Practical Support for Daily Production This reliable solution facilitates maintaining a clean and safe work environment, increases operator comfort, and supports the smooth, continuous operation of machines in professional applications. Capacity: 8900 m³/h Motor power: 7.5 kW (10 HP), 3000 rpm Speed: 32 m/s Filter dimensions: Ø160 x 940 mm Number of filters: 42 Filtration area: 21 m² Swarf collection: big bag (1250 liters) Connection diameter: Ø300 mm Dimensions: 1210 x 2550 x 3520 mm Weight: 540 kg

Year of construction: 2026, condition: new, The AL-KO Sanding table AST 1.5 BASIC is the entry-level model for the AL-KO sanding table program. It is certified according to GS-HO-11 and bears the seal "Wood dust tested according to BGI 739-1". It is therefore suitable for manual grinding as well as for machining workpieces with manual work machines. The grinding table is made of galvanized steel sheet. The workpiece support consists of a removable beech wood grate. It is accessible from all 4 sides. So that several people can work at the same time. Thanks to the sturdy, structurally stiffened construction, workpieces with a weight of up to 150 kg can be processed. In order to adjust the work surface of the AL-KO AST 1.5 BASIC to the required working height, it is equipped as standard with a mechanical height adjustment. The height adjustment is done without any tools by adjusting the feet in scaled grid dimensions. In addition, all feet can be adjusted in millimeters according to the respective ground conditions. The extraction trough is optimized in terms of flow technology. Due to the funnel-shaped design of the trough with integrated air duct, the air stream is directed to the intake socket. Depending on the extraction capacity required, the connection to the customer-specific extraction system can be made via a connection piece Ø 140 or Ø 160 mm. The bending of the machining surface on both two longitudinal sides also allows machining of workpieces on the end face The suction grilles are aligned with the flow connection to the suction port and thus guarantee an optimal extraction result. For cleaning work inside the sanding table, the slat grating can be lifted off and the air duct can be removed by loosening a few screws. The sanding table is delivered pre-assembled, only the feet have to be mounted and adjusted to the required working height. Tender specification AST 1.5 BASIC page 2 from 2 Technical data AST 1.5 BASIC: Ijdefyadbjpfx Aaljtd - Intake socket 140/ 160 mm - Required suction performance 1.500 m³/h - Vacuum on socket at 22 m/s 1.000 Pa bei Ø 140 mm 700 Pa bei Ø 160 mm - Working height adjustable 735 – 1.015 mm - Working surface (W x L) 946 x 1.500 mm - Dimension (W x L) 1.000 x 1.600 mm - Weight approx. 73 kg

Condition: ready for operation (used), Year of construction: 2001, machine/vehicle number: 938 533, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 400 V, input current: 14 A, input frequency: 50 Hz, type of input current: three-phase, volume flow: 5,087 m³/h, suction capacity: 2,400 m³/h, intake manifold diameter: 300 mm, filter area: 31 m², noise level: 81 dB, total height: 2,400 mm, total length: 2,400 mm, total width: 1,300 mm, overall weight: 620 kg, year of last overhaul: 2024, Equipment: documentation/manual, For sale is a fully operational, regularly maintained extraction system. It can still be viewed in operation; dismantling is scheduled for week 17. The manual with wiring diagram and maintenance invoices are available. Itodpfx Ajyt Eicsaljd

Condition: new, Year of construction: 2025, Suction port diameter: 1 x 200, 3 x 100mm Nominal volume flow: 1760 m³/h Itsdpjhpmawjfx Aaljd Residual dust content: 0.1 mg/m³ Chip collection volume: 240l Filter cleaning: motorized motor power: 3 kW Noise level: 78dB(A) Machine length: 1340 mm Machine width: 900 mm Machine height: 2170 mm Weight: 178 kg

Condition: used, Year of construction: 2023, Used system Year of manufacture: 2023 Condition: As new, system has only a few operating hours Equipment and technical specifications: - Stationary clean air filter system ECO JET DUO 6 XL ZRS 2 x 7.5 kW - For extraction of wood dust and wood chips - Fan: 2 x 7.5 kW - Airflow rate: 10,000 m³/h at - Negative pressure: 2,700 Pa (total) / 2,200 Pa (static) - Filters: 80 pcs à 2.50 m - BIA category M, electrically conductive - Filter area: 77.6 m² - Filter surface load: 129 m³/(m²x h) - Filter cleaning: AL-KO OPTI JET® - Pressure relief panels: 0.84 m² (bursting discs) - Lower section with discharge chute and rotary valve Dry discharge with C-coupling Comprising: - ECO JET DUO 6 UPPER PART, 2 x 7.5 kW: Clean air filter system; 2 x 7.5 kW fan; AL-KO OPTI-JET filter cleaning; Incl. pressure relief panels and dry discharge with C-coupling; without filters and control; Incl. pressure sensors - ECO JET DUO 6 ZWR XL - 1100 MM: Intermediate ring for expansion or unit height increase with 2 inlet connections for suction nozzles - Base frame with discharge chute and integrated rotary valve 960/1 FG: For disposal of chips via on-site transport fan into existing silo or similar Transport pipe DN 200 mm, approx. 1,260 mm long under rotary valve, connection to transport pipe to be provided by buyer Rotary valve certified according to ATEX Directive 94/9/EC Technical data ZRS 960/1FG: CE 0588 Ex II 1D/- (Unit for indoor/outdoor); EX D (protection system); FSA 11 ATEX 1614X Motor output: 0.18 kW / 0.78 A 3 Ph / 400 V / 50 Hz Protection class / mounting: IP 54 / B3 Insulation class: F Speed: 41 rpm Discharge capacity*: 15,744 l/h* Number of cells: Itsdpfxsyk I U As Aalsd 7 pcs Inlet/outlet cross-section: 960 x 250 mm / 960 x 208 mm Dimensions (W x D x H): 1,100 x 605 x 330 mm Temperature range: up to 50°C *depending on material - FILTER & SUPPORT CAGE 2.5 / CAT M EL WHITE FILTER ECO JET DUO 6: 80 pcs required Filter BIA category 'M' – electrically conductive; 2.50 m long, incl. support cages; 77.6 m² filter area - Inlet nozzle 400 mm: with backdraft damper in rectangular duct - ECO JET backdraft damper 910x346x500 - Control cabinet – AL-KO Control System: BASIC CONTROL ACS II WITH TOUCHSCREEN DISPLAY: Basic unit for cascade control of 2 fans via frequency inverter (FU) up to max. 37 kW; corresponding performance module and controls as well as the frequency inverter are included in the basic unit; the FU is installed in the control cabinet Cascade control with FU handover: Fan 1 operates on the frequency inverter; when threshold is reached, switches to mains operation; Fan 2 takes over FU and regulates as needed; Basic functions: Control voltage 24 V Touchscreen display, ST 1200 control, Sitop Power supply, collective fault warning Display of fault message as plain text on display and collective fault indicator on the door Manual discharge start via display button Start filter cleaning via differential pressure Manual filter cleaning start via button Post-cleaning Fire monitoring

Condition: used, Year of construction: 1996, Suction nozzle diameter: 160 mm Maximum volumetric flow rate: 1770 m³/h Rated volumetric flow rate: 1448 m³/h Airflow monitoring: differential pressure indicator Vacuum: 1570 Pa Filter area: 10.5 m² Residual dust content: less than 0.2 mg/m³ Sound pressure level: Chip sack volume: Filter cleaning: pneumatic, jet cleaning Motor power: 2.2 kW Machine length: 1600 mm Machine width: 700 mm Machine height: 2200 mm Weight: Isdpox Edmpofx Aalotd

Condition: used, Extraction installation Riedex MD-280 Connection diameter 300mm Filter Bags 48 Pieces Capacity 6000m³/h Electric knock motor Main fan 11kW Transport fan 4kW Itsdpfx Aajwng Nnelod Filter bags need to be replaced complete with control box and +/- 40m pipes. Total dimensions filter box: 1200x3400x3400mm - Documentation available: No - CE certificate present: No - Number of filter bags [pcs]: 48 - Connection diameter [mm]: 300 - Main fan power [kW]: 11.0 - Control cabinet present: Yes - Shaking system: Yes - Collection container: Yes - Transport fan included: Yes - Transport fan power [kW]: 4.0 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2007, Extraction installation Riedex MD-300L Connection diameter 300mm Filter Bags 2000x200mm, 48 Pieces Capacity 6000m³/h Electric shaking motor Including transport fan 4kW Overall dimensions: 2000x3000x3600mm (LxWxH) - Year: 2007 - Documentation available: No - CE certificate present: No - Number of filter bags [pcs]: 48 - Filter length [mm]: 2000 - Filter diameter [mm]: 200 - Connection diameter [mm]: 300 - Shaking system: Yes - Collection container: Yes - Transport fan included: Yes Itodswng T Tepfx Aaljd - Transport fan power [kW]: 4.0 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, volume flow: 9,400 m³/h, power: 15 kW (20.39 HP), input frequency: 50 Hz, Three fans are offered; the price is for one fan each. All three fans are identical in design. Itjdjxcv Ndopfx Aaljd

Condition: used, Dust suction hood 160 mm Itedpfx Aasyi Ht Ujled Motor output 1,5 kW Dimensions (L/W/H) 1.220 x 650 x 3.270 mm

Condition: good (used), Code: 0306 Brand: VM Model: 2/18 Suction system with 18 sleeves and 2 collection bags for carpentry workshops, furniture factories, sawmills, woodworking shops and various Technical data: Iedpjymfiisfx Aaljtd N° 18 filtering sleeves N° 2 collection bags Motor Hp 7,5 Electrical panel Overall dimensions: mm 2800 x 1200 x 3200 h

Condition: used, Empty weight: 5.000 kg Extraction system Brand: Reinders Almelo Type: RVR675-350 Year of construction: 1997 Machine number: 97036 Capacity: 40.000 m3/h Pressure: 1,5 kPA Iedjwl Hv Aspfx Aalstd Power main motor: 18,5 kW Diameter connection pipes: 510mm and 170mm Overall dimensions: 16000x4200x8000 mm (LxWxH) - Documentation available: No - CE certificate present: No - Transport weight [kg]: 5000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1996, total height: 2,200 mm, total length: 1,700 mm, total width: 700 mm, - Year: 1996 - Documentation available: No - CE marking present: Yes - CE certificate present: No Iodsx E R A Hopfx Aalotd - Serial number: 938 551 - Capacity [m³/h]: 1770 - Connection diameter [mm]: 160 - Number of connections [pcs]: 1 - Main fan [pcs]: 1 - Main fan power [kW]: 2.2 - Negative pressure [Pa]: 2500 - Mobile: Yes - Control cabinet present: Yes - Collection bins: Yes - Number of bins/bags [pcs]: 1 - Voltage [V]: 400 - Power [kW]: 2.2 - Transport dimensions: 1700mm x 700mm x 2200mm (l x w x h) Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2009, Dimensions (L/W/H) mm Itedpeu Sbkaofx Aaljd Filter capacity 14 m² Number of filters St. Dimensions (L/W/H) mm engine output 5,5 kW 0 2.800 m³/h low pressure 5.000 Pa suitable for dust removal from graphite and metals electromotive filter cleaning including mechanical filter unit ME-FI 2000 Manufacturer W+W Filtersysteme The suction fan is located behind the filter on the clean side, which reduces the risk of explosion to a minimum.

Condition: excellent (used), Year of construction: 2000, For sale is a Höcker Polytechnik Vacumobil system. The unit is fully functional and can be inspected and tested on site. The sale is carried out on behalf of a customer. Machine location: Friedeburg region. Machine details: - Year of manufacture: 2000 - Extraction diameter: 300 mm - Motor power: 7.5 kW - Nominal air flow rate: 5320 m3/h - Mobile on castors Price is net, plus VAT. An invoice for the machine will be issued. Shipping of the machine can be arranged at additional cost. Feel free to contact us with any questions or if you are interested! Your JG Holztechnik Team Iodpfoylciwjx Aaljtd from 26188 Edewecht.