Used dividing heads for sale (126)

Condition: used, Rotary Table WMW Type D 315 k Rotary table with mechanical drive, crank, and scale Dividing head, indexing table Hsdpfx Aoxcbpiokiow Serial No.: 16508 Table diameter: 315 mm Table height: approx. 135 mm Transmission ratio: 90:1 - Crank with index plate and sector arm - Scale ring for reading at the crank - Readable degree graduation on the rotary table - Pivotable worm gear for direct indexing - Clamping via clamping screw - 14 mm T-slots in the table surface - Cardan drive - Built-in index plate: 17-25-30-39-47-57 - Rotary table drive suitable for console milling machine WMW HECKERT Type FU 315 E, possibly also for FU 400 E - Dividing head (index plate = 20) suitable for console milling machine WMW HECKERT Type FU 315 E, possibly also for FU 400 E Weight: 145 kg Good condition

Condition: as good as new (ex-display), Year of construction: 2025, machine/vehicle number: 0816, Compact, high-precision CNC rotary table dividing head with control. Suitable for single-piece or small-batch production in mechanical engineering. A horizontal or vertical configuration is possible. Available for immediate delivery. - Made in Germany - This dividing head is particularly suitable as a 4th axis on engraving and milling machines for milling, engraving, laser cutting, drilling, grooving, or for use on a tool or surface grinding machine. Square, hexagonal, gear milling with any pitch, or 3D machining is possible. Extremely precise and accurate - the worm gear is designed with a maximum reduction ratio of 100:1, which was specifically designed by us and is not a standard component. Output torque well over 70 Nm. The max. clamping diameter is 250 mm. Center height: 125 mm. The drive is via a controlled stepper motor with 200 steps and 7.5 A, with a holding torque of 9.7 Nm. Possible adjustable indexing accuracy at the output: 0.00028125 degrees with 1/64 step programming. The worm gear pair is four times ball-bearing mounted and adjusted for zero backlash, and can also be readjusted. The bearings are from FAG/SKF. The one-piece, stable output spindle is fitted with a faceplate, d = 200 mm, with an internal taper MK 3 and a through-hole of 20.3. Weight 26 kg. Accessories: Optional USB data cable for programming. Optional compressed air connection. Optional 200 mm 3-jaw chuck Optional protective shield with integrated proximity switch for automatic operation. Keys, complex scales, cross-holes, or gears can be quickly produced. Hsdpfobatamsx Akiew The electronic control unit as a handy module with 14 travel programs and 2 reference point travels, as well as step monitoring with a power supply, is included in the package. The toolbox module is made of metal. The optimized pre-programming is done in 360, 180, 120, 90, 72, 60, 45, 30, 10, 5, 1, 0.02, 0 degree incremental positioning steps. Repeat cycles, right and left travel, and cycle pauses can be programmed. With the software you can: program travel programs and cycles, program absolute or incremental travel values. The actual value can be displayed very comfortably at any time in the software. With one output, you can exclusively receive start pulses from an NC machine. Keys, complex scales, cross-holes, or gears can be quickly produced. For your applications, standard clamping devices are offered, and we also have the possibility of quickly and inexpensively manufacturing special clamping devices for you. Furthermore, solutions for special rotary tables can be implemented on request. With warranty, German operating manual, and after-sales service since 2006. 1500 Roundinho rotary tables in use worldwide.

Condition: as good as new (ex-display), Year of construction: 2024, Compact, precision CNC rotary table suitable for single-piece or small-batch production in precision engineering. A horizontal or vertical configuration is possible. You can't buy better quality! - Made in Germany - It can be used as a 4th axis on engraving and milling machines for engraving, laser processing, drilling, milling slots, or on tool and surface grinding machines. Square, hexagonal, and gear milling of any pitch, or 3D machining are possible. Precision worm gear with a reduction ratio of 100:1. Output torque well over 25 Nm. The drive is powered by a controlled 1.8-degree stepper motor with 3.2A and a holding torque of 1.2 Nm. The worm and worm gear are manufactured in-house, guaranteeing the highest precision. The pair is mounted on four ball bearings and adjusted for zero backlash, and can be readjusted. The one-piece, stable output spindle is equipped with a faceplate, d=108 mm, with an MK 1 internal taper and a through hole of 10.3 (optional M12 internal thread). The electronic control as a handy module with 14 travel programs and 2 reference point travels as well as step monitoring with a power supply is included in the package. The optimized pre-programming is done in 360 (for milling operation), 180, 120, 90, 72, 60, 45, 36, 30, 20, 10, 5, 1, 0.02 incremental repeat cycles, right and left travel, and cycle pauses, which can of course be programmed. With the software you can: Travel programs and cycles; absolute or incremental travel values. The actual value of the rotary axis can be easily queried at any time using the software. Using an output, you can receive start pulses from an NC machine. Complex scaling divisions, transverse bores or gears can be produced quickly. In addition, you can now use a start pulse to run several different travel angles one after the other. For example, incrementally 30 degrees, then 3 degrees, then 90 degrees, then 1.45 degrees, with or without a pause, or rotate back. Ideal for Hermle, Chiron, DMG Mori, Maho, Deckel FP1, G1, Jung, Mikron or Gravograph. NEW: As an additional option, all 16 travel steps as well as start and reference commands can now be controlled externally by your NC control system using M-functions. Optional: Locking air with splash guard. We can offer standard clamping devices for your applications. Furthermore, we have the possibility to quickly and inexpensively manufacture special clamping devices for you. Special accessories: 3-jaw chuck 80 mm: 125 Euro # 600011 3-jaw chuck 100mm bore 25 mm and an adapter plate (center height adjustment to 80 mm): 300 Euro # 600021 Tailstock: height adjustable 60 - 80 mm: 150 Euro Hsdpod Erdrefx Akiow # 600030 Clamping device for ER 25 collet with nut: 125 Euro # 600031 USB data cable for programming via PC: 150 Euro # 600032 Programming of your travel angles: 40 Euro # 600033 Test travel program and test report of the final inspection: 100 Euro # 600036 Collet set ER 25 up to D16 mm 10 pcs.: 125 Euro # 600037 Clamping device for ER 32 collet with nut up to D20: 125 Euro # 600097 Control cable with magnetic switch - read contact for automation without NC machine output: 25 Euro # 600099 Acceptance / Programming / Aluminum case / Software provision: 80 Euro

Condition: used, Year of construction: 1987, Technical details: max. pitch circle diameter: 360/24 mm weight of the machine approx.: 46 kg centre height: 130 mm swivable: ja ° rotation movement: 360 Grad dimensions: 350 x 450 x 260 mm Application: For auxiliary work e.g. scribing of graduations. -dividing attachment with chuck Ø 125 in 360° pitch circle -clamping takes place via grid with index -pitch circle 24 Hsdpfx Aksu Nlg Toijw -chuck: Ø 125mm, with revolving scale; through hole Ø 17mm; without jaws -base plate: size 260 x 300mm, with 2 clamping grooves WxL: 15 x 21mm - chuck key - 2 pieces groove stone *

Condition: used, Dividing Head Center Height: 100 mm Transmission Ratio: 40:1 Spindle Taper: SK 40 with M16 draw thread Clamping Surface: 240 x 200 mm Grid Pattern on Clamping Surface: 210 x 125 mm, Ø 14 mm - 3-jaw chuck Ø 125 mm with step jaws - Crank handle with indexing plate and sector arms - Crank handle with swing-out indexing plate for direct dividing - 1 indexing plate with hole counts: 15, 18, 21, 29, 37, 43, 51 - 1 indexing plate with hole counts: 16, 19, 23, 31, 39, 47, 53 - 1 indexing plate with hole counts: 17, 20, 27, 33, 41, 49, 57 - 24-position index (15° increments), graduated scale on work spindle - Complete dividing head, rotatable and tiltable on the base plate Hodpjy E T Dgefx Akisw Dimensions (L x W x H): 410 x 370 x 300 mm Net weight: 48 kg Good condition

Condition: new, centre height // mm total power requirement / kW Hodpfszcgfqox Akiow weight of the machine ca. / t required space / m Parts machine for lids FP1 / FP2 Condition: NEW

Condition: good (used), rotary table, rotary indexing table, dividing head, dividing head -Dividing head:Dividing head with three-jaw chuck Hjdpfx Aowc Sgzekiew -Type: unfortunately without type designation -Three-jaw chuck: Ø 137 x 70 mm, inner Ø 37 mm -Spindle bore: Ø 25 mm -Dimensions total: 510/480/H250 mm -Weight: 69 kg

Condition: used, Indexing head with tailstock DECKEL Center height: 100 mm Gear ratio: 40:1 Hsdpfxoxcbp Ne Akiew Spindle bore: 26 mm - 3-jaw chuck FORKARDT, Type F 160 with one set of step jaws - Crank handle with index plate and sector arms - Swiveling crank handle with index plate for direct dividing - 1 index plate with hole numbers: 36, 37, 40, 58 - 24-step index position (15° increments), graduated scale on the main spindle - Tailstock center with dovetail guide - Complete indexing head rotatable and tiltable on base plate Dimensions (L x W x H): 600 x 400 x 270 mm Net weight: 67 kg Indexing head in need of repair: - Key strip for dovetail guide is missing - Lever for index positioning is broken - Swivel mechanism is stiff

Condition: good (used), Grinding wheel puller, cup wheel puller, double grinding stand puller, surface grinding machine puller, cylindrical grinding machine puller, pulling head, dressing head for grinding machines, grinding wheel dresser, copy head, radius dresser, disc puller -Puller: Copy head for grinding wheel puller -Dimensions: see photos -Dimensions: 290/230/H170 mm Hedpfx Aowuz Swekijw -Weight: 14.1 kg

Condition: good (used), centre height 220 mm table diameter 220 mm 250mm - chuck - 3 jaws 80mm passage Can be used vertically and horizontally Standing tip height 220mm Hjdpfx Asu Sbl Rekisw

Condition: good (used), dividing head, dividing head, gear, gears lathe, spur gears, spur gear Hjdpex R Swijfx Akiew -Gears: 71 pieces module 1.5 -Teeth: 33 to 127 Z see photo parts list -Tooth width: mm -Shaft mount: Ø 28/23 mm -Dimensions: see photo parts list -Shipping/Price: complete -Transport dimensions: 550/370/H150 mm -Weight: 68 kg/total

Condition: good (used), Dividing head, dividing apparatus Dividing head, dividing apparatus, tool holder for grinding, drill grinding machine, milling cutter grinding machine, drill grinding holder, milling cutter grinding holder -Manufacturer: Zeatz, dividing head Cabezal Divisor Universal -Tip height: 150 mm -Three-jaw chuck: Bison Ø 160 mm, bore Ø 40 mm -Parting head: swiveling 90° -Spindle bore: Ø 28 mm Hedpfet Hmh Sex Akijw -Dimensions: 470/440/H240 mm -Weight: 61 kg

Condition: good (used), Dividing Head Brand: presumed Deckel Chuck: 130 mm Centre Height: 90 mm Base Area: 250 x 200 mm Hjdpfx Aex U Tk Eokisw Accessories: Dimensions: 450 x 400 x 250 mm Weight of dividing head: 47 kg

Condition: used, Gear, cogs, spur gear -Gear: helical, 59 teeth -Diameter: Ø 344 mm -Tooth width: 80 mm -Dimensions: see photos -Total dimensions: Ø 344 x 467 mm -Weight: 78 kg Hedpfxoh Ra Hvs Akiow

Year of construction: 1987, condition: used, centre height 390 mm Hedpfx Akohgw Uxsiew passage of steadyrest 220 mm chucking diameter 400 mm total power requirement / kW

Condition: new, diameter 200 mm height 105 mm Hedehuxbrepfx Akiew weight of the machine ca. 25 kg dimensions of the machine ca. 400 x 280x 150 m

Condition: good (used), Tailstock, counter bearing for dividing head, dividing head -Peak height: 255 mm -Recording: MK4 -Dimensions: see drawing in the images Hedpsfwx Ugefx Akijw -Dimensions: 600/220/H410 mm -Weight: 84 kg

Condition: excellent (used), Dividing head Walter Type UPA 125 N (28487) direct and indirect dividing center height 125 mm Can be used horizontally and vertically Spindle holder MK 4 Hjdpfx Akstrnndeisw KKG 3 Travel bag SPH 125 mm Mounting MK 2 Total transport weight 62 kg dividing head 48 kg

Condition: used, Technical details: weight of the machine approx.: 160 kg dimension machine xH: 0,58 x 0,50 x 0,3 m swivable: nein ° rotation movement: 360 Grad Application: For auxiliary work e.g. scribing of graduations. Hodeu N E Dxepfx Akisw -dividing attachment with chuck *

Condition: excellent (used), Gear, cogs, gear shaft Hjdpfeh Ra Hgox Akiow -Gear shaft: helical -Diameter: Ø 127 mm -Tooth width: 83 mm -Dimensions: see photo techn. drawing -Total dimensions: Ø 127 x 450 mm -Weight: 25.5 kg

Condition: used, Motor-driven indexer and rotary table, also known as indexing table with 15° indexing lock. Manufacturer: WALTER, Type: TARM 125 Serial No.: 1156, Year of manufacture: approx. 1985 Indexing lock: 15° Flange mount: short taper DIN 55022 size 5, Ø 82 mm Internal diameter of chuck flange: Ø 44 mm Continuous internal diameter: Ø 40 mm Construction height to flange mount without taper: 163 mm Horizontal clamping surface: 260 x 215 mm Vertical clamping surface: 195 x 160 mm Hodpfxsyhq A Dj Akijw Center height vertical: 125 mm Motor speed: 0 to 500 rpm Power supply: 380 Volt, 50 Hz - external control required (control unit not included) - can be used vertically and horizontally - usable as indexer or rotary transfer table - one direction of rotation continuous, the other direction with 15° indexing lock Space requirement L x W x H: 500 x 215 x 177 mm Weight: 42 kg Good condition

Condition: new, diameter 200 mm height 105/265 mm centre height 105 mm Hsdpfoupxd Rjx Akijw weight of the machine ca. 41 kg dimensions of the machine ca. 400 x 330 x 310 m

Condition: good (used), Rotary table, rotary indexing table, dividing head, dividing head -Dividing attachment with: three-jaw chuck and crank -Chuck: Ø 160 mm -Dividing head: rotatable, swiveling -Dimensions: 540/470/H250 mm -Weight: 67 kg Hjdpfx Akjfk Affoiew

Condition: used, Tailstock, counter bearing for dividing head, dividing attachment -Tailstock comes: from a Ramo a42 lathe -Quill: electrically driven Hsdsfd Rrvopfx Akiow -Motor: 220/380 V 0.18 kW -Spindle stroke: 300 mm -Recording: MK4 -Dimensions: 790/550/H580 mm -Weight: 98 kg

Condition: used, machine/vehicle number: 2502, DESCRIPTION Hedjc Tuyrepfx Akisw Parting head, manufacturer Walter Type HT 200 U Center height 200 mm Mounting taper SK 50 Spindle diameter 130 mm Weight 260 kg Space requirement: W 500 x D 650 x H 450 mm DMT0Z2OCZN9