Dividing head

Rottstedt Roundinho 60P

Compact precision CNC rotary table, suitable for single part or small series production in precision engineering. A horizontal or vertical setup is possible. You can't buy better quality! - Made in Germany - It is suitable as a 4th axis on engraving and milling machines for engraving, lasering, drilling, grooving, milling or for use on a tool or surface grinding machine. Square, hexagonal, gear milling of any pitch or 3D machining is possible. Precision worm gear with a reduction ratio of 100:1. Output torque well over 25 Nm. The drive is via a controlled stepper motor of 1.8 degrees with 3.2A with a holding torque of 1.2 Nm. The worm and worm wheel are manufactured in-house, guaranteeing the highest setting precision. The pair is mounted on four ball bearings and set to be free of play, and is also adjustable.
The one-piece, stable output spindle is fitted with a face plate d=108 mm with an internal taper MK 1 and a through hole 10.3 , (optional M12 internal thread).
The electronic control as a handy module with 14 travel programs and 2 reference point travels as well as step monitoring with power supply is included in the package.
The optimized pre-programming takes place in 360 (for milling operation), 180, 120, 90, 72, 60, 45, 36, 30, 20, 10, 5, 1, 0.02 incremental rotary cycles, right and left travel and cycle pauses are of course programmable.
With the software you can
Travel programs and cycles; Absolute or incremental travel values The actual value of the rotary axis can be easily queried at any time using the software. You can receive start pulses from the NC machine using the output. Difficult scale divisions, cross holes or gears can be produced quickly.

You can also now use a start pulse to travel through several different travel angles one after the other - e.g. incrementally 30 degrees, then 3 degrees, then 90 degrees, then 1.45 degrees
with or without a break or turn back again.

Ideal for Hermle, Chiron, DMG Mori, Maho, Deckel FP1, G1, Jung, Mikron or Gravograph.

NEW: As an additional option, all 16 travel steps as well as start and ref. commands can now be remotely controlled by your NC control using M functions.
Optional: sealing air with splash guard hood
We can offer standard clamping devices for your applications, and we also have the option of producing special clamping devices for you quickly and inexpensively.

Special accessories:
Three-jaw chuck 80 mm: 125 euros
# 600011 Three-jaw chuck 100 mm, 25 mm bore and an adapter plate (center height increased to 80 mm): 300 euros
Godpsd Erdrsfx Ahvebw
# 600021 Tailstock: height adjustable 60 - 80 mm: 150 euros
# 600030 Holder for ER 25 collet with nut: 125 euros
# 600031 USB data cable for programming via PC: 150 euros
# 600032 Programming your travel angle: 40 euros
# 600033 Measuring travel program and test report of the final acceptance 100 euros
# 600036 Collet set ER 25 to D16 mm 10 pcs.: 125 euros
# 600037 Holder for ER 32 Collet with nut up to D20: 125 euros
# 600097 Control cable with magnetic switch read contact for automation without NC machine output: 25 euros
# 600099 Acceptance/ program / aluminum case / software provision: 80 euros

The listing was translated automatically. Translation errors are possible.