Used Dividing heads for sale (131)

Condition: used, centre height 90 mm spindle culvert in tie rod 25 mm transmission 40 : 1 weight approx. 41 kg Gsdpfovimwpox Aacouh  

Condition: as good as new (ex-display), Year of construction: 2024, Compact precision CNC rotary table, suitable for single part or small series production in precision engineering. A horizontal or vertical setup is possible. You can't buy better quality! - Made in Germany - It is suitable as a 4th axis on engraving and milling machines for engraving, lasering, drilling, grooving, milling or for use on a tool or surface grinding machine. Square, hexagonal, gear milling of any pitch or 3D machining is possible. Precision worm gear with a reduction ratio of 100:1. Output torque well over 25 Nm. The drive is via a controlled stepper motor of 1.8 degrees with 3.2A with a holding torque of 1.2 Nm. The worm and worm wheel are manufactured in-house, guaranteeing the highest setting precision. The pair is mounted on four ball bearings and set to be free of play, and is also adjustable. The one-piece, stable output spindle is fitted with a face plate d=108 mm with an internal taper MK 1 and a through hole 10.3 , (optional M12 internal thread). The electronic control as a handy module with 14 travel programs and 2 reference point travels as well as step monitoring with power supply is included in the package. The optimized pre-programming takes place in 360 (for milling operation), 180, 120, 90, 72, 60, 45, 36, 30, 20, 10, 5, 1, 0.02 incremental rotary cycles, right and left travel and cycle pauses are of course programmable. With the software you can Guedjd Erdrjpfx Aacsh Travel programs and cycles; Absolute or incremental travel values The actual value of the rotary axis can be easily queried at any time using the software. You can receive start pulses from the NC machine using the output. Difficult scale divisions, cross holes or gears can be produced quickly. You can also now use a start pulse to travel through several different travel angles one after the other - e.g. incrementally 30 degrees, then 3 degrees, then 90 degrees, then 1.45 degrees with or without a break or turn back again. Ideal for Hermle, Chiron, DMG Mori, Maho, Deckel FP1, G1, Jung, Mikron or Gravograph. NEW: As an additional option, all 16 travel steps as well as start and ref. commands can now be remotely controlled by your NC control using M functions. Optional: sealing air with splash guard hood We can offer standard clamping devices for your applications, and we also have the option of producing special clamping devices for you quickly and inexpensively. Special accessories: Three-jaw chuck 80 mm: 125 euros # 600011 Three-jaw chuck 100 mm, 25 mm bore and an adapter plate (center height increased to 80 mm): 300 euros # 600021 Tailstock: height adjustable 60 - 80 mm: 150 euros # 600030 Holder for ER 25 collet with nut: 125 euros # 600031 USB data cable for programming via PC: 150 euros # 600032 Programming your travel angle: 40 euros # 600033 Measuring travel program and test report of the final acceptance 100 euros # 600036 Collet set ER 25 to D16 mm 10 pcs.: 125 euros # 600037 Holder for ER 32 Collet with nut up to D20: 125 euros # 600097 Control cable with magnetic switch read contact for automation without NC machine output: 25 euros # 600099 Acceptance/ program / aluminum case / software provision: 80 euros

Condition: used, Used 5th 160 mm axis with hydraulic clamp and Siemens servo motors. Located in Estonia, eU Guedewbuabspfx Aacjh

Condition: used, Technical details: weight of the machine approx.: 160 kg dimension machine xH: 0,58 x 0,50 x 0,3 m swivable: nein ° rotation movement: 360 Grad Application: For auxiliary work e.g. scribing of graduations. -dividing attachment with chuck Gjdpsu N E Dxsfx Aaceuh *

Condition: as good as new (ex-display), Year of construction: 2022, machine/vehicle number: 0815, Compact large precision CNC rotary table with control unit, suitable for single part or small series production in mechanical engineering, horizontal or vertical assembly is possible. Immediately available - Made in Germany - Guodpfx Aaebatamoceh The dividing head is particularly suitable as 4th axis on engraving and milling machines for milling, engraving, lasering, drilling, grooving or for use on a tool or surface grinding machine. Square, hexagonal, gear milling of any pitch or 3D machining is possible. Extremely precise and accurate worm gear is designed with a maximum reduction ratio of 100:1, which was specially designed by us and is not standard. Output torque far above 70 Nm. The max. clamping diameter is 250 mm. The peak height is 125 mm. The drive is made by a controlled stepping motor of 200 steps with 7,5 A with a holding torque 9,7 Nm. Possible adjustable graduation accuracy at the output: 0,00028125 degrees with 1/64 step programming. The worm pair has four ball bearings and is adjusted backlash-free, also adjustable.the bearings are from FAG/SKF. The one-piece stable output spindle is equipped with a face plate d=200 mm with inner taper MK 3 and through hole 20,3.Weight 26 Kg Accessories: opt. USB-data lever for programming. opt. Sealing air connection. opt. 200mm three jaw chuck opt.guard plate with intgr. sewing switch for auto-operation Quickly are key surfaces, a difficult ska

Condition: used, Year of construction: 1987, Technical details: Guedpfx Aaeu Nlg Tecoh max. pitch circle diameter: 360/24 mm weight of the machine approx.: 46 kg centre height: 130 mm swivable: ja ° rotation movement: 360 Grad dimensions: 350 x 450 x 260 mm Application: For auxiliary work e.g. scribing of graduations. -dividing attachment with chuck Ø 125 in 360° pitch circle -clamping takes place via grid with index -pitch circle 24 -chuck: Ø 125mm, with revolving scale; through hole Ø 17mm; without jaws -base plate: size 260 x 300mm, with 2 clamping grooves WxL: 15 x 21mm - chuck key - 2 pieces groove stone *