Used Dividing Head for sale (10,297)

Condition: good (used), Year of construction: 2003, functionality: fully functional, overall weight: 225 kg, faceplate diameter: 400 mm, DIVIMEK Meca DCN-400 NC rotary table Previously used on a Hedelius machine with Siemens 840D control Tsdpfx Aszn Iv Hja Isc Fully functional Includes ROD encoder Available for immediate delivery

Condition: excellent (used), functionality: fully functional, The dividing head is equipped with an SK40 spindle and has a spindle bore of 25mm. It can be swiveled from right to left up to 90° each. The dividing head spindle can be tilted 6°/15° from and towards the machine. It is suitable for all Deckel FP series milling machines and their "licensed machines," such as the Macmon M100. The distance from the spindle axis to the tailstock guide is 100mm. Direct division is possible using a 360° division circle or 24 x 15° indexing. The distance from the dividing head center to the tailstock center is 400mm. Indirect division is achieved with a worm gear of 40:1, using a scale disk with 1' division or three different hole disks (A: 27; 31; 34; 41; 43 – B: 33; 38; 39; 42; 46 – C: 36; 37; 40; 58). Also included are a Röhm four-jaw chuck, a three-jaw chuck (possibly Röhm) with adapter rings, and a two-jaw chuck, as well as a tailstock with a tailstock bearing. The dividing head, which was originally non-functional, along with all accessories, has been disassembled into individual parts, refurbished, made fully functional, and painted in two colors (RAL 7035 light gray / RAL 5004 dark blue). The dividing head is not in use and can be delivered immediately. Minor signs of wear from previous use are visible to a small extent. A single-use transport crate, with a total weight of 109 kg, has been prepared for transport. A manual compiled from Deckel descriptions is also included in the scope of delivery. Tedpfx Aasz Hyyfj Isc

Condition: used, machine/vehicle number: 2502, DESCRIPTION Tsdpfx Aaec Tuyrj Ioc Parting head, manufacturer Walter Type HT 200 U Center height 200 mm Mounting taper SK 50 Spindle diameter 130 mm Weight 260 kg Space requirement: W 500 x D 650 x H 450 mm DMT0Z2OCZN9

Condition: excellent (used), Dividing Head / Quick Divider Manufacturer: Unispa 24-degree direct division 1-degree increments with handwheel Center height: 135 mm (28604) Stock number Length: 470 mm Tjdpfxov S Ar Ie Aa Ioc Depth: 300 mm Height: 260 mm Weight: 60 kg

Condition: good (used), dividing head, dividing head, gear, gears lathe, spur gears, spur gear -Gears: 71 pieces module 1.5 -Teeth: 33 to 127 Z see photo parts list -Tooth width: mm -Shaft mount: Ø 28/23 mm Tedpfx Asx R Swioa Iec -Dimensions: see photo parts list -Shipping/Price: complete -Transport dimensions: 550/370/H150 mm -Weight: 68 kg/total

Condition: used, center height: 210 mm, with tailstock and 3-jaw chuck, 230 mm, center height 210 mm, bore 50 mm. Tsdpfx Aaszw Uhbs Isc

Condition: used, Dividing head, dividing head, rotary table, rotary table -with translation: 1:40 Tedpfx Aocht Uvsa Ijc -Admission inside: MK4 -Tip height: 165 mm -swiveling -Dimensions: 600/500/H300 mm -Weight: 84 kg

Condition: used, Rotary table, dividing head, machine rotary table Table diameter: 250 mm Table height: 95 mm Table bore: Ø 25 mm Gear ratio: 90:1 Clamping surface: 375 x 295 mm Hole spacing on clamping surface: approx. 340 mm, Ø 18 mm - Indirect division via handwheel on the worm gear, gear ratio: 90:1 - Worm gear can be swiveled in and out for direct and indirect division - Clamping via 2 clamping levers in any position Todpfxszpbrqj Aa Ioc - 12-fold indexing and a readable degree scale on the rotary table - Crank with perforated disc - 1 perforated disc with 17, 19, 28, 32, 33, 39, 40 holes - 12 mm T-slots in the table top - Table surface slightly countersunk Overall dimensions L x W x H: 500 x 375 x 95 mm Weight: 40.5 kg Good condition

Condition: used, Rotary Table WMW Type D 315 k Rotary table with mechanical drive, crank, and scale Dividing head, indexing table Serial No.: 16508 Table diameter: 315 mm Table height: approx. 135 mm Transmission ratio: 90:1 - Crank with index plate and sector arm - Scale ring for reading at the crank - Readable degree graduation on the rotary table - Pivotable worm gear for direct indexing - Clamping via clamping screw - 14 mm T-slots in the table surface - Cardan drive Tsdpfx Aajxcbpis Iec - Built-in index plate: 17-25-30-39-47-57 - Rotary table drive suitable for console milling machine WMW HECKERT Type FU 315 E, possibly also for FU 400 E - Dividing head (index plate = 20) suitable for console milling machine WMW HECKERT Type FU 315 E, possibly also for FU 400 E Weight: 145 kg Good condition

Condition: used, Indexing head with tailstock DECKEL Center height: 100 mm Gear ratio: 40:1 Spindle bore: 26 mm - 3-jaw chuck FORKARDT, Type F 160 with one set of step jaws - Crank handle with index plate and sector arms - Swiveling crank handle with index plate for direct dividing - 1 index plate with hole numbers: 36, 37, 40, 58 - 24-step index position (15° increments), graduated scale on the main spindle - Tailstock center with dovetail guide - Complete indexing head rotatable and tiltable on base plate Dimensions (L x W x H): 600 x 400 x 270 mm Net weight: 67 kg Indexing head in need of repair: - Key strip for dovetail guide is missing - Lever for index positioning is broken Tsdpfx Aaoxcbp Nj Iec - Swivel mechanism is stiff

Condition: used, Dividing Head Center Height: 100 mm Transmission Ratio: 40:1 Spindle Taper: SK 40 with M16 draw thread Clamping Surface: 240 x 200 mm Todpfx Aaey E T Dgj Ioc Grid Pattern on Clamping Surface: 210 x 125 mm, Ø 14 mm - 3-jaw chuck Ø 125 mm with step jaws - Crank handle with indexing plate and sector arms - Crank handle with swing-out indexing plate for direct dividing - 1 indexing plate with hole counts: 15, 18, 21, 29, 37, 43, 51 - 1 indexing plate with hole counts: 16, 19, 23, 31, 39, 47, 53 - 1 indexing plate with hole counts: 17, 20, 27, 33, 41, 49, 57 - 24-position index (15° increments), graduated scale on work spindle - Complete dividing head, rotatable and tiltable on the base plate Dimensions (L x W x H): 410 x 370 x 300 mm Net weight: 48 kg Good condition

Condition: good (used), Rotary table, rotary indexing table, dividing head, dividing head -Dividing attachment with: three-jaw chuck and crank -Chuck: Ø 160 mm -Dividing head: rotatable, swiveling -Dimensions: 540/470/H250 mm -Weight: 67 kg Tedsfk Affepfx Aa Isc

Condition: as good as new (ex-display), Year of construction: 2024, Compact, precision CNC rotary table suitable for single-piece or small-batch production in precision engineering. A horizontal or vertical configuration is possible. You can't buy better quality! - Made in Germany - It can be used as a 4th axis on engraving and milling machines for engraving, laser processing, drilling, milling slots, or on tool and surface grinding machines. Square, hexagonal, and gear milling of any pitch, or 3D machining are possible. Precision worm gear with a reduction ratio of 100:1. Output torque well over 25 Nm. The drive is powered by a controlled 1.8-degree stepper motor with 3.2A and a holding torque of 1.2 Nm. The worm and worm gear are manufactured in-house, guaranteeing the highest precision. The pair is mounted on four ball bearings and adjusted for zero backlash, and can be readjusted. The one-piece, stable output spindle is equipped with a faceplate, d=108 mm, with an MK 1 internal taper and a through hole of 10.3 (optional M12 internal thread). The electronic control as a handy module with 14 travel programs and 2 reference point travels as well as step monitoring with a power supply is included in the package. The optimized pre-programming is done in 360 (for milling operation), 180, 120, 90, 72, 60, 45, 36, 30, 20, 10, 5, 1, 0.02 incremental repeat cycles, right and left travel, and cycle pauses, which can of course be programmed. With the software you can: Travel programs and cycles; absolute or incremental travel values. The actual value of the rotary axis can be easily queried at any time using the software. Using an output, you can receive start pulses from an NC machine. Complex scaling divisions, transverse bores or gears can be produced quickly. In addition, you can now use a start pulse to run several different travel angles one after the other. For example, incrementally 30 degrees, then 3 degrees, then 90 degrees, then 1.45 degrees, with or without a pause, or rotate back. Ideal for Hermle, Chiron, DMG Mori, Maho, Deckel FP1, G1, Jung, Mikron or Gravograph. NEW: As an additional option, all 16 travel steps as well as start and reference commands can now be controlled externally by your NC control system using M-functions. Tsdpfod Erdrex Aa Ioc Optional: Locking air with splash guard. We can offer standard clamping devices for your applications. Furthermore, we have the possibility to quickly and inexpensively manufacture special clamping devices for you. Special accessories: 3-jaw chuck 80 mm: 125 Euro # 600011 3-jaw chuck 100mm bore 25 mm and an adapter plate (center height adjustment to 80 mm): 300 Euro # 600021 Tailstock: height adjustable 60 - 80 mm: 150 Euro # 600030 Clamping device for ER 25 collet with nut: 125 Euro # 600031 USB data cable for programming via PC: 150 Euro # 600032 Programming of your travel angles: 40 Euro # 600033 Test travel program and test report of the final inspection: 100 Euro # 600036 Collet set ER 25 up to D16 mm 10 pcs.: 125 Euro # 600037 Clamping device for ER 32 collet with nut up to D20: 125 Euro # 600097 Control cable with magnetic switch - read contact for automation without NC machine output: 25 Euro # 600099 Acceptance / Programming / Aluminum case / Software provision: 80 Euro

Condition: excellent (used), Dividing head Walter Todpfotrnndox Aa Isc Type UPA 125 N (28487) direct and indirect dividing center height 125 mm Can be used horizontally and vertically Spindle holder MK 4 KKG 3 Travel bag SPH 125 mm Mounting MK 2 Total transport weight 62 kg dividing head 48 kg

Condition: excellent (used), Professional dividing table / dividing head BERNARDO BS-1 equipped with a high-quality BISON Ø160 mm lathe chuck. This set is designed for milling machines and precision machining requiring angular division and indexing of parts. Technical data: • Dividing head manufacturer: Bernardo • Model: BS-1 • Lathe chuck: BISON 3-jaw • Chuck diameter: 160 mm • Maximum chuck speed: 3000 rpm • Precise angular scale Tedpfx Aaoza Hido Ijc • Dividing plate with indexing crank • Robust cast iron construction • Ability to perform accurate angular divisions Applications: • Milling polygons • Manufacturing gears • Machining shafts and rotating components • Drilling holes at a specific angle • Tooling and production work Condition: • Used item • Fully complete • Normal signs of use visible in the photos • BISON chuck operates smoothly and securely clamps the part • Scales and dividing mechanism are clear and functional The set includes: • BERNARDO BS-1 dividing head • BISON Ø160 mm lathe chuck • Indexing crank The item being sold is exactly the one shown in the pictures.

Condition: used, Rotary table, indexing table, dividing head WMW type D 315 k Serial no.: 10930 Table diameter: 315 mm Table height: 135 mm Gear ratio: 90 : 1 - Crank handle with indexing plate and sector arm - Graduated scale ring for reading at the crank - Readable degree graduation on the rotary table - Swing-out worm for direct indexing - Clamping via clamping lever - 14 mm T-slots in the table plate (one place damaged) Tsdpfxoxf Uyto Aa Ioc - Built-in indexing plate: 23-28-33-42-51-61 Weight: 85 kg

Condition: good (used), Dividing head, dividing head, gearwheel, gears, lathe -Gears: 8 pieces -Shaft mount: Ø 28 mm -Teeth: 57/78/87/99/104/114/126/130 -Dimensions: see photo parts list -Dimension total. Ø 198 x 143 mm -Weight: 18.9 kg Tsdpfef S Nc Eex Aa Iec

Condition: used, machine/vehicle number: 7979, Table diameter: 400 mm Tjdpfx Aasb Ez R Uj Iec Table with 8 T-slots: 12 mm Overall height: 175 mm Space required: 600 x 450 x 175 mm Weight: approx. 100 kg

Condition: good (used), Tailstock, counter bearing for dividing head, dividing head, lathe -Tailstock: for dividing head -Shaft: Ø 50 x 515 mm Tedpjwag Uhjfx Aa Ioc -Dimensions: see photos -Dimensions: 645/90/H200 mm -Weight: 7.8 kg

Condition: good (used), Vemag Filler & Depositor Model Robot 500 Tsdez Hl Uhopfx Aa Ioc Year 2016 Complete with depositor Just removed from production

Condition: good (used), Optical dividing head, precision dividing head -Max. tip height: 76 mm -Max. center distance: 200 mm -with collets: 3, 4, 5, 6, 7, 8, 9, 10, 16 mm -wooden box Tedpfxeb A Iqbo Aa Isc -Total weight per box: 42 kg Quantity: 1 piece available

Condition: good (used), Dividing head Brand: presumably WMW Spindle taper: MK 3 – drawbar required Indexing plate diameter: 170 mm Todpfx Aowy Hlgoa Iec Hole division: 15 7 16 7 17 / 18 / 19 / 21 / 23 / 27 Mounting surface: 235 x 185 mm Accessories: Dimensions: 340 x 280 x 350 mm Weight dividing head: 39 kg

Condition: excellent (used), Professional measuring instrument with two sliding spindles terminated with cones. Enables precise positioning of a component for checking runout, straightness, or concentricity. Tedpew Rkqtsfx Aa Isc Specification (approximate): Working length between centers: about 300 mm Base length: about 380 mm Spindles with sliding and locking capability High-precision industrial construction Universal application for measurement or workshop use Condition: Very good technical and visual condition The instrument is ready for operation

Condition: used, machine/vehicle number: 2032, Dividing head, dividing head, tool holder for grinding, drill grinding machine, milling cutter grinding machine, drill grinding holder, milling cutter holder -Accessories for: dividing head Toded Ebp Hepfx Aa Isc -with: hand crank -Dimensions: 390/400/H200 mm -Weight: 28 kg

Condition: used, Year of construction: 2021, Dough divider and rounder König Grande Rex T3 Tsdez A Sbmepfx Aa Iec Year of manufacture: 2021 Condition: cleaned & inspected Extended model of the Basic Rex for processing high dough weights Also suitable for pizza, baguettes and other products 3-row head machine Max. hourly output up to 2160 pieces Plunger size SK 95 Weight range: 135 to 320 g