Used compressors for sale (51)

Condition: used, Year of construction: 2016, Suction capacity approx. 850 l/min Filling capacity approx. 680 l/min Compressed air tank 10 bar Tank capacity Tank capacity 2 x 100 l Tank surface galvanized Mounted on safety base plate Chedpfx Acjy Ifmro Tob Including refrigerated dryer, fine filter, automatic condensate drain

Condition: good (used), Year of construction: 1992, functionality: fully functional, 1 x screw compressor Make RF 10 YD Year of manufacture: 1992 with refrigerant dryer Renner RKT CQ 0065 Year of manufacture: 2017 + receiver tank OKS 500 liters / max. 11 bar Year of manufacture: 1998 Technical data: max. pressure 10 bar Chsdpfszgc Sgox Ac Tjb Power: 7.5 kW Air flow rate: 930 l/min Operating noise: 70 dB (A) The system can be inspected while it is running.

Year of construction: 2018, condition: used, Compressor design: screw compressor Codpex Hwq Hsfx Ac Tehb Pressure: 10 bar Volumetric flow rate: 1080 l/min Condensate drain: automatic Weight (approx.): 240 kg Motor power: 7.5 kW Electrical connection (approx.): 400 V Workshop overhauled: new filters, oil change, etc. Location: customer

Year of construction: 2026, condition: used, New display machine! Stationary piston compressor with refrigerant dryer, condensate drain, oil-water separator and pre-/fine filter. The universal solution with belt drive and high-quality features. Especially suitable for craftsmen. These compressors are used where compressed air quality, durability, and efficiency are essential. Long service life thanks to two-stage high-performance units with low speed, specially machined cast cylinders for minimal oil consumption and extended lifespan, high-performance valves, optimum cooling via large fan wheel, motor with overload protection, easy condensate drainage using the standard-mounted 1/2" ball valve, standard equipped with Condor pressure switch and manometer, mounted as standard on a safety pallet with anti-vibration mounts. Chodpfx Asyw Thvec Tob Technical data: Suction capacity 650 l/min, output capacity 520 l/min, max. pressure 10 bar, tank volume 270 l, cylinders/stages 2/2, speed 920 min-1, motor power 4 kW / 400 V, weight approx. 197 kg Location: Rieth

Condition: good (used), Year of construction: 2002, functionality: fully functional, overall weight: 700 kg, The 30 kW screw compressor has been disassembled and is ready for shipment. Chodpfezb Dq Iex Ac Teb

Year of construction: 2005, condition: excellent (used), power 11Kw (15hp) max working pressure 8 bar 400V three-phase power supply Chedjiu Ic Ijpfx Ac Tjb 1000 liter air tank

Year of construction: 2013, condition: used, This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details. For inquiries: Zoltán Utasi Plus 36 30 205 7380 • Press table dimensions:ca. 3450 mm long × 1450 mm wide. • Bonding area (electrode area): 3000 mm long × 1300 mm wide. • Maximum workpiece thickness: 130 mm. • The top pressure is provided by 8 hydraulic cylinders with Ø50 mm bore, arranged in two rows. • Side pressure is provided by 24 hydraulic cylinders with Ø50 mm bore, arranged in one row at 144 mm centers. This cylinder arrangement is required to achieve maximum pressure over the entire 130 mm glue line thickness and 3450 mm length. • Side pressure is continuously adjustable. • Recommended side pressure: o Softwood: 18–20 kp/cm² o Hardwood: 20–23 kp/cm² • The hydraulic power unit is equipped with a variable-displacement axial piston pump. • Maximum hydraulic pressure: 200 bar. • The PP sheet covering the press table is replaceable. It protects the expensive aluminum electrode from wear and significantly reduces cleaning time. • The press is suitable for producing laminated timber panels up to 6000 mm long in two pressing cycles. Chedpfszn N Ecox Ac Tob • Motorized loading table with a usable length of 3000 mm, providing easy material handling. • The loading table is equipped with rollers spaced at 250 mm intervals. • The loading table incorporates 4 transverse chain conveyors. During transverse material transfer, their upper level is raised to the roller level by 6 pneumatic cylinders. • The guide rails and drive for the transfer carriage are located above the loading table. • The steel unloading table has a length of 3000 mm. • The unloading table is equipped with rollers spaced at 300 mm intervals. • Material flow is from left to right. The loading table is located on the left side of the press, while the unloading table is located on the right side. • The conveyor-type glue applicator is positioned before the loading table. Conveyor width: 250 mm. Infeed section: 1500 mm long. Outfeed section: 3500 mm long. The glue applicator includes a removable glue reservoir. • A limit switch is installed at the end of the conveyor to prevent workpieces from falling off. • A movable roller table is positioned before the conveyor for applying adhesive to long workpieces. • RF Generator and Electrical Specifications • The integrated 30 kW radio-frequency (RF) generator is capable of curing approximately 2 m² of glued surface per minute when using PVA adhesive and timber with a moisture content of 6–8%. • The RF generator is easily tuned using an adjustable vacuum capacitor. • Power supply: 3 × 400 V, approximately 45 A. • The anode main switch and the control system main switch are located at the front of the press for easy access. Press Control, Monitoring, Operating Cycles and Safety Features • The control panel includes an anode current meter, grid current meter, glue curing timer, cycle indicator lights, press control buttons, fault indicator lamps, and an audible alarm. • The press closes in manual mode using a two-hand safety control system. • Equipped with an emergency stop safety system. • The press door includes an alignment cycle to assist in positioning the timber before pressing. Specifications are provided for information only.

Year of construction: 2025, condition: new, Dimensions (L/W/H) 750x705x1800 mm Weight 170 kg Total power requirement 4 kw Chodpfx Acjv A Hv Sj Tjb

Year of construction: 2025, condition: new, Dimensions (L/W/H) 1070x495x895 mm Weight 80 kg Total power requirement 3 kw Chedpev A Hv Ejfx Ac Tob

Year of construction: 2025, condition: new, Dimensions (L/W/H) 945x705x1800 mm Weight 206 kg Total power requirement 4 kw Chjdpsv A Hwcjfx Ac Tsb

Year of construction: 2025, condition: new, Dimensions (L/W/H) 820x410x810 mm Weight 64 kg Chodpfx Ajv A Hvxoc Tjb Total power requirement 2,2 kw

Year of construction: 2009, condition: used, Used, top condition, low operating hours Manufacturer: Kaeser Model: Mobil 450 Year of manufacture: 2009 Machine no.: 1781 CE type approved Motor: 2.4 kW, 380V Piston compressor Air output: 450 l/min. Max. operating pressure: 10 bar Csdpfx Acoyr Sk Re Tshb Mobile With pressure vessel Capacity: 90 litres Max. permissible pressure: 11 bar New price approx. €2,000.00 Required floor space approx. 1300x500x900 mm Total connected load approx. 2.4 kW Location: 97447 Gerolzhofen, loaded free on truck, unpacked Delivery in current condition as inspected, without warranty or liability.

Condition: ready for operation (used), functionality: fully functional, motor power 5,5kW tank capacity 300l capacity 35m3/h max pressure 8bar connection 380V Csdpfjy N N R Dex Ac Tshb

Condition: new, Walter Technic Compressor Model: SKTG 5.5 PP Kombo Dryer, Csdpfx Ajy Nlwtec Tehb Automatic condensate drain, Tank: 500 litres, Pressure: 10 bar, Capacity: 700 litres per minute, Weight: 505 kg.

Condition: new, Falke Technik Compressor Model: FKTG 5.5P COMBO Chedpsy H Ipysfx Ac Tob Dryer, Automatic condensate drain, Tank: 500 litres, Pressure: 10 bar, Capacity: 700 litres per minute, Weight: 420 kg.

Condition: good (used), Compressor Blitz Chsdpfx Aevzxg Hoc Tsb BSD 30-110 1 stage 2770 rpm 15800 l/min 10 bar

Condition: ready for operation (used), Year of construction: 1990, Motor power: 15 kW Maximum pressure: 10 bar Chedov I Sqfepfx Ac Tjb

Year of construction: 2018, condition: like new (used), Atlas Copco GA 5 FF screw compressor including refrigerant dryer. Motor & Performance: • Rated power, main motor: 5.5 kW (7.5 HP) • Motor efficiency: Typically IE3 (protection class IP55) • Voltage / Frequency: 400 V / 50 Hz (3 phases) • Starting method: Star-delta Chodpfxey T Ibve Ac Tob Pressure and Flow Rate: 7.5 bar 15.0 l/s (900 l/min) ~54.0 m3/h 8.5 bar 13.2 l/s (792 l/min) ~47.5 m3/h 10 bar 12.5 l/s (750 l/min) ~45.0 m3/h 13 bar 8.4 l/s (504 l/min) ~30.2 m3/h Tank capacity: 270 l Integrated refrigerant dryer: • Pressure dew point: +3 °C • Additional power consumption: approx. 0.22 kW • Condensate drain: Electronic, loss-free Noise Level & Environment • Sound level: 60 to 63 dB(A) (very quiet due to complete encapsulation, installation directly at the workstation is possible) • Permissible ambient temperature: +1 °C to +46 °C Dimensions & Weight: • Length x Width x Height: approx. 1500 mm x 730 mm x 1710 mm • Weight: approx. 360 kg Control: • Type: Elektronikon Operating hours: 1170 h Year of manufacture: 2018 Price: 5000.-

Condition: excellent (used), 4kW motor Tank capacity 500l Csdpeuhrursfx Ac Tshb Max pressure 11Bar Power supply 400V

Condition: good (used), Year of construction: 2010, MANUFACTURER: BRAND MODEL: MSC37/10 SERIAL NO.: API200079 YEAR: 2010 POWER (kW): 37 CAPACITY (m3/min): 6.70 Cjdpfxsylbd Ts Ac Tshb PRESSURE (bar): 10

Year of construction: 2018, condition: ready for operation (used), Comp Air screw compressor incl. refrigeration dryer Comp Air screw compressor L 06 5.5 kW Year of manufacture: 2018 10 bar Chodpfoy Amknox Ac Tob Delivery rate: 0.67 m³/h Refrigeration dryer PT 9

Condition: ready for operation (used), functionality: fully functional, motor power 11kW working pressure 10bar Csdjy N N Rwjpfx Ac Tshb capacity 1,59m3/min

Year of construction: 2017, condition: as good as new (ex-display), I sell the screw compressor: Comprag A-1110 Motor - 11kW, Power - 1,8 m3/min., Csdpfx Ajfgvtdoc Tehb Pressed air max.10 bar Year 2017. All working, like new.

Condition: good (used), I sell the screw compressor: Atlas Copco GA208 PACK Motor - 18,5kW, Power - 2,6 m3/min., Chsdpfxsmk E Dro Ac Tjb Pressed air max.8 bar Dimensions 2200 x 1140 x 1250 mm 38370 working hours All working.

Year of construction: 2015, condition: like new (used), I sell the screw compressor: MARK MSB 30/10 Motor - 30kW, Power - 3540 l/min., 212 m3/hr. Pressed air max.10 bar Year 2015. Cjdpfjiu Icvex Ac Tshb All working, like new.