Compressor

Aircraft Kolbenkompressor AIRSTAR 703/270/10 V mit AD2000

Condition: used, Year of construction: 2018, Used machine Year of manufacture: 2018 Special feature: Machine for up to 100 mm edge height! Condition: Factory-inspected by Lange Maschinenbau Equipment and technical data: - Machine table with 13 running rollers for improved workpiece guidance - Edge feeding, synchronous with belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with knife (for cuttable edges) - Three pressure rollers - Belt feed: - 0.25 kW - approx. 1250 mm long - approx. 6.0 m/min - 50 mm wide toothed belt with thick, workpiece-friendly rubber top - Digital counter for height adjustment - Direct glue application to the workpiece: drip-proof glue pot with glue supply from below and rapid heat-up time after standstill - Flush cutting unit: - for front and rear workpiece edges - automatic sensing at the workpiece - pneumatic cutting with knife for cuttable edges - Flush trimming unit - with vertical sensing and horizontal guidance - reproducible setting using digital counters - 2 powerful 0.4 kW high-frequency motors - stepless speed adjustment from 4000 to 18000 rpm - Cutter Ø 70 mm, Z4, radius 2 mm/15° - central extraction nozzle Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper cutter with belt feed - Continuous workpiece support approx. 1800 mm long - Workpiece support rail, extendable by approx. 300 mm - Rotatable foil dispenser Ø: 800 mm - Workpiece width: min. approx. 80 mm Ledpswka S Iefx Adqeri - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roller separation: max. 1.0 x 55 mm, 2 x 45 mm - Glue pot heating capacity: 2.7 kW - Heat-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400V, 50 Hz, 3Ph + N - Total connected load: 3.8 kW - Pneumatic connection: 6 Bar Dimensions (without foil dispenser): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg Availability: short-term Location: Flörsheim

Condition: used, Year of construction: 2000, Used feeder Year of manufacture: 2000 Suitable for Kündig Uniq edge sanding machine Technical specifications: Max. reach: 1050 mm Number of feed rollers: 4 Roller diameter: 120 mm Roller width: 60 mm Spring travel of rollers: 25 mm Speed settings: 8 (2/4/5.5/6.5/11/13/16.5/33 m/min) Motor power: 0.75 kW Ljdpfxoumpp Ej Adqeri Connection: 400V/50 Hz Weight: 32.5 kg The console shown in the picture is not included in the scope of delivery! Location: Flörsheim Availability: Immediately

Condition: used, Year of construction: 2018, fuel type: diesel, weight max. in kg 1800 kg stroke 4250 mm Ljdpfx Ast Symljdqjri fork length 1200 x 120 x40 mm free lift 150 mm construction height 2746 mm

Condition: good (used), Year of construction: 2009, TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine -Manufacturer: Merkle, TIG welding machine water-cooled, with transport trolley Lrsdpfx Adsqw D Eijqsi -Type: TIG 240 DC -Welding power: max. 240 A -Cooling: Merkle WK 230 water circulation cooler -Accessories: incl. ground cable, hose package see photos -Dimensions: 970/560/H1085 mm -Total weight: 99 kg

Condition: new, empty load weight: 420 kg, maximum load weight: 880 kg, overall weight: 1,300 kg, loading space length: 2,980 mm, loading space width: 1,520 mm, loading space height: 1,650 mm, tire size: 165r13c, Poly box trailer Cargo-Poly2 with side door from the manufacturer Cheval Liberte / Debon. Elegant and aerodynamic box trailer with polyester body, available in various colors. The handling of this car trailer is superb. The polybox is equipped with the Pullman2 running gear. A low entry height of just 35 cm ensures a low center of gravity, which is ideal for optimum driving characteristics. Added to this is the independent wheel suspension with trailing arms, coil springs and shock absorbers to automotive standards. The low loading height ensures a flat drive-on angle for loading vehicles such as motorcycles and quad bikes. Lrjdpfsidzp Rex Adqoi For other loads, this box also has a drive-on flap that can also be opened to the side as a door to load pallets, for example. The car trailer is equipped with a poly body, folding door system, side door, 100 km/h, rear supports, interior light, support wheel, lashing eyes, sturdy frame and a V-drawbar. We offer motorcycle rockers, motorcycle stand rails, motorcycle lashing straps, lashing straps and additional lashing eyes as accessories. The body is splash-proof. --- You can also find all our low-cost offers on our homepage Germany-wide delivery (except islands) possible! for the prices. --- PKW-Anhänger-Center Ahrens Moordeicher Landstraße 37 28816 Stuhr near Bremen Tel: 0 Fax: Pick-up times: Monday - Friday - o'clock Saturday is not possible!

Condition: good (used), Year of construction: 2003, Tilting panel saw Altendorf F45 with ELMO IV-plus package, 2-axis scorer, 3m table, and Control-Plus control Sliding table length: 3000 mm Saw blade tilting from 0 to 45 degrees Speeds: 3000, 4000, 5000, and 6000 rpm with electronic speed display Drive motor: 5.5 kW with automatic motor brake Control panel at eye level with Control-Plus control 4-axis CNC controlled Cutting of chain measurements and grooves on the rip fence and crosscut fence Cutting width correction on the rip fence and crosscut fence with tilted saw blade 600 cutting programs Calculator function with direct transfer of results to the respective axis Tool management Lrsdpexw Ii Sofx Adqei Saw blade diameter up to 450 mm Max. cutting height: 150 mm Cutting width up to 1040 mm, electrically adjustable Tilting angle and height adjustment electrically adjustable Crosscut fence rail up to approx. 3210 mm, electrically adjustable, automatic coupling of the second stop flap for large dimensions Folding rip fence Extraction outlets: 120 + 80 mm Sliding carriage lockable Additional mitre fence rail 2 used saw blades and one scorer blade 2 riving knives 2-axis scoring unit, electrically adjustable during operation 2 blade guards 3 emergency stop switches Clipboard at the control panel CE marking Machine shows signs of wear. No cuts in the sliding table. Original paint (special paint finish), partially repainted in some areas. Machine has 18,985 operating hours. It originates from a furniture factory and has been regularly serviced and well-maintained. Condition as per original photos. A video of the machine in operation can be provided upon request. Approx. dimensions: 3150 x 3750 x 1900 mm (L x W x H). Weight approx. 1400 kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this seller".

Condition: used, Vertical band saw MÖSSNER REKORD type SM 420 Machine No. 17010 Year of construction 1968 roll diameter 420 mm throat width 415 mm throat in height 265 mm table size 605 x 600 mm Lredodzqc Repfx Adqji band speed 18 - 562 m/min. 8 steps saw band length min/max. 3150 / 3260 mm drive power 1,1 / 1,7 kW Mains connection 380 V 50 Hz - Saw band speed via 4 gear steps and 2 motor speeds - saw blade butt welding unit IDEAL BS 0-16 with shear and grinding stone - swivelling working table in 2 axes space requirement L x W x H 950 x 750 x 1900 mm weight 570 kg good condition

Condition: good (used), Year of construction: 2024, machine/vehicle number: 20660471, Offer 24143 Technical data: - Vertical version - Max. operating pressure 15 bar - Fully galvanized pressure tank / boiler - Pressure tank capacity 270 l - Suction volume 500 l/min - Delivery volume 470 l/min - Compressor speed 940 rpm - Cylinder stages 2 - 2 - Drive 400 V / 4.0 kW - Pressure gauge - 3 swing feet - Boiler diameter approx. 600 mm - Space requirement approx. W 800 x H 1850 x D 800 mm Lrjdpstx T Anefx Adqji - Weight approx. 240 kg

Condition: used, Year of construction: 2025, functionality: fully functional, machine/vehicle number: TET MINI M05 - 2200422920, cooling capacity: 1.73 kW (2.35 HP), type of input current: AC, type of cooling: water, overall weight: 71 kg, ambient temperature (max.): 45 °C, ambient temperature (min.): 5 °C, input voltage: 230 V, temperature: 7 °C, volume flow: 0.286 m³/h, pump pressure: 3.342 bar, total width: 486 mm, total length: 660 mm, total height: 623 mm, warranty duration: 3 months, input frequency: 50 Hz, Equipment: type plate available, Process chiller / air-cooled water chiller, Type: TAEevo TECH MINI M05 MTA S.p.A. The TAEevo TECH MINI M05 are compact water chillers suitable for indoor installation. Includes buffer tank (open system, not a pressurized tank) and built-in circulation pump. Lodoxc Ud Tepfx Adqeri Cooling capacity: 1.73 kW Chilled water temp. outlet/inlet: 7 / 12°C Flow rate: 0.286 m³/h Available pump pressure: 3.342 bar Ambient temperature: 32°C Refrigerant: R 410A Electrical Data: Voltage: 230 V, Frequency: 50 Hz, Phase: 1 Ph Max. power consumption: 1.6 kW Max. current: 7.5 A Starting current: 20 A Protection class: IP33 Dimensions: Length: 660 mm, Width: 486 mm, Height: 623 mm Weight: 71 kg Connection: Rp 1/2" Serial No.: 2200422920 Year of manufacture: 2025 Condition: Visual 2, Technically OK Used Used machines may have visual defects due to previous use. (Subject to technical changes and prior sale!) Location: MTA Deutschland GmbH, 41334 Nettetal

Condition: used, Year of construction: 2005, feed pressure 10 bar liter capacity 2,66 m³ / min total power requirement 18,5 kW motor speeds: 3000 min/1 Lrodevuz Rhepfx Adqoi dimensions 1200 x 900 x 1200 mm weight of the machine ca. 150 kg