Atlas Copco SF 11 FF
SCROLL COMPRESSOR
Type: SF11
Max, working pressure: 7,8bar/ 113psig
Capacity flow rate: 20,2 l/s , 1,21m³/min , 42,8cfm
Installed motor power: 11,1kW , 15PS
Noise level: 63dB(A)
Weight: 515kg , 1135lbs
Year of manufacture: 2006
#####
REFRIGERATOR
Model: FX5
Outlet pressure dew point
+5 °C/41 °F
Inlet capacity: 35l/s , 74cfm
Pressure drop: 0.40Bar , 5.75psi
Outlet pressure dew point
Fobc32zyy
+3 °C/37 °F
Inlet capacity: 30l/s , 64cfm
Pressure drop: 0.30Bar , 4.35psi
Max. ...
We offer a compressor unit CX T.
Compressor unit CX T
Type: CX T No. 09085
Scope of delivery. (See pictures)
(Errors and omissions in the technical data, information are reserved!)
We can answer questions on the phone for you.
Mylvv
Written order possible by email or fax
Used and very well maintained: complete Frick/York industrial freeze-pump installation consisting of the following main components: Frick/York XJS 120S, swept volume 415 m3/h, screw compressor package, equipped with oil separator, thermo siphon oil cooler, 90 kW Leroy Somer E-motor, Mentioned cooling capacity of 74 kW is at -40°/ +35°C with refrigerant R717.
L9s9n
4 identical units available
Compressor unit Fabr. BOGE type BRM 2750-213
Fabr.# 189546 built in 1972
Technical data:
maximum compression pressure 10 bar
Stroke volume 2750 l / min.
effective delivery quantity 2220 l / min.
Speed-1070 RPM.
Engine power 20 PS
Electricity 380 V / 50 Hz
External dimensions approx. 1000 x 800 x 1200 mm
Hht9v3m3q
with
-Air cooler
little used despite year of manufacture in very good condition
Volume flow: 21,217m³/h, with Direct Current Motor BAUMÜLLER GN 250 SN, impeller, bearing and seals were overhauled in 2016.
Bemos8v7iq
RENNER Industrial piston compressor with refrigeration dryer
Beyx0ol
New machine
Suction capacity 700l/min (delivery rate 570l/min)
Maximum pressure 10 bar
Pressure vessel 270l
Engine power: 400V 4.0 kW,
Dimensions: 970 x 795 x 1880mm
vertical version for industrial applications, robust belt guard, galvanized air reservoir according to AD2000 guidelines (with hand hole)
with intercooler and aftercooler, rubber-bonded metals for effective reduction of vibrations,
with refrigerant dryer,
with aut...
Type of fuel: Diesel
Field of application: Construction
Brqn8eme2p
Make of engine: Iveco
Generator capacity: 100 kVA
Generator: MECC ALTE
Frequency: 50
Voltage: 230
Drill equipment: Steel canopy
Delivery terms: EXW
pipe system - processing diameter: mm
pipe system - inlet: 200 mm
volume flow ventilator - shred: m³/h
flow rate: 2261 m³/min
Bo09sgyuqo
flow rate: max: 3010 m³/min
filter surface area: 13,8 m²
compressed air: max. 8,5 bar
total power requirement: 2,9 (Motor) kW
weight of the machine approx.: 470 kg
dimensions LxWxH: 2,25 x 0,90 x 2,90 m
Extraction fan for extracting air dust in joinery workshops and/or in plastics processing
with two dirt boxes with 241 litres capacity each, retractable
Compres...
Purpose of use:
Physico-chemical (waste) water treatment.
Purification of river water.
Purification of swimming pool water.
Pre-treatment of drinking water production.
Pretreatment for seawater desalination.
Purification of lixiviate, animal manure or heavy industrial waste water.
Reverse osmosis or nanofiltration can be added to the unit as extensive purification.
With the eccentric worm pump the flow can be regulated between 0.2 and 2.25m3 / h.
Electrical / PLC board:
PLC, Unistream from Uni...
3HAC17396-1 ABB Serial measurement unit
Lgtqkzzj
Compressor Metabo Ct750 / lt 270 used 2005
Mark:
Metabo
Model:
Ct750 / lt 270
Description:
Manufacturer Metabo
Model / machine type CT750 / LT 270
Year of production 2005
Category of machines Piston compressor
Location
Gorzów Wlkp.
Conditions of delivery
COLLECTIVE AND SHIPPING REFLECTIONS
Cost of delivery
Customer cover
Start type
to be agreed
Description
Comments
COMPRESSOR CT 750/270 COMPRESSOR The compressors of the Italian company SHAMAL® are the highest quality devices and guarantee
...
OPERATOR INTERFACE PANEL USED GOOD WORKING
PAY PAL
Iei0zlz
SENDING POST POLAND TO UE 30EURO
Satisfaction Guaranteed, sold with 14 days Warranty.
We accept paypal only
Manufacturer Name: Atlas Copco
Year:2017
Serial Number: API625692
CE Marked: YES
Capacity Size: 55 KW
Model: GA 55+
Capacity Speed: 2978 RPM
Produce Being Compressed: Air
Voltage: 400 VOLTS
Iwhgfcn
Frequency: 50 HERTZ
Phase: 3
Current: 55 KW
Recommended Packaging Form: CUSTOM
Dimensions: 2250 x 1100 x 2000 MM - 1358 KGS
Serial No. AII217083
Bozqw2nehh
Input 415/3/50hz 11 kW
Bar 7.5
CFM 78.8
PSI 105
Equipment 575 litre air receiver, MTA air dryer
Length 1200mm
Width 800mm
Height 1000mm
Nett weight actual. 820 Kgs.
Condition Used
Bnjpjyypir
This listing is for a Buchi K-355 Steam Distilation UnitThe standalone Kjeldahl BUCHI model K-355 is versatile to meet a variety of laboratory needs. An easy to use, basic distillation units for the analysis of nitrogen – ammoniacal, TKN, protein and Devarda in a variety of industries. In addition, the K-355 is perfectly suited for additional applications that require steam regulation and/or addition of acids eg. SO2, phenol, formaldehyde and alcohol.Features:3-5 minute...
This stand alone PUR glue unit is for converting your
existing 1-3 clamp binder into a PUR binder. It is self powered
and was bought by our client in case his existing PUR broke
Bvp9vsfq
down.
Inatec PUR System
5 litre pre-melter with fast melt mode
2 metre heated hose with nozzle
Like New Condition
Age: 2004
Suitable for a binder maximum 1500 cycles per hour
This unit was purchased as a back up for an existing PUR unit and
only used as an insurance.
Make Mettler Toledo, Type PFA 575-E3000, No. 3097502, Material Mild steel, Year of construction unknown, Mounted on frame , Floorspace 1,7x1,5 M, Total height 3,2 M, Weight 750 Kg, Extra Specifications This weighing platform is used to weigh Big Bags that can be filled at this location by means of a hopper with the option of dust extraction. The filling opening of the bag can be clamped by a pneumatic clamping system. The product supply tube is closed by an air-operated plate slide. The frame ha...
power capacity 18,5 kW
feed pressure 40 bar
liter capacity 1100 l
total power requirement 18,5 kW
weight of the machine ca. 1 t
dimensions of the machine ca. 2,2 x 1,2 x 1,4 m
in excellent condition,
without contactor control,
Bheloa30c2
unknown operating hours - no counter included,
was only used for testing purposes,
Year of construction: 2013
Pressure: 8 bar
Free air delivery: 7,05 m³/min
Motor: 45,00 kW
Voltage: 400 V / 50 Hz
Measurement (WxHxD): 2730 x 2000 x 1310
Compressed air connection: DN 65
Working hours: 512,00
Weight: 2376,00 kg
Br9qio0ir3
Condition Used
Dmkszql
this listing is for 1 of 2 Soxtec Avanti 2050 Auto Fat Extraction SystemAutosystem Comprising 2050 Extraction unit 2050 Control Unit with Drive Unit for Four step Solvent Extraction and fully Automatic Unattended Operation Fast system using small solvent volumes
feed pressure 8 bar
liter capacity 1,200 m³/min
Number of working hours 18005 h
turning speeds 3000 U/min
total power requirement 7,5 kW
Vtgo3q
weight of the machine ca. 0,235 t
dimensions of the machine ca. 480 x 990 x 1235 mm
Temperating machine , Make Tool-Temp (CH), Type TT-131 N, . 91-6662, Material Mild steel, Electric heating , Electric capacity 12 kW 380 Volt, With pump , Capacity 5 bar max 110 l/min, Motor 1,8 kW, With temperature controller , Year of construction unknown, With switch , Floorspace 0,9x0,4 M, Total height 0,9 M, Weight 160 Kg What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide...
weight max. 10 t
workpiece diameter 150 - 2300 mm
Turning speed 70 - 1200 mm/min
roll diameter 300 mm
Wheel width 100/150 mm
total power requirement kW
Benypyp3rd
weight of the machine ca. t
dimensions of the machine ca. 1,8 x 1,5 x 1,0 m
unused vessel turning unit,
with rubberised rolls, manual adjustable roller-spacing,
one device with twin drive with adjustable rotational speed.
Very Good; a few minor scraches on panels. "OIL FREE".
H8mcvfn
Price new . 54,846€
Manufactured 2017Serial No. 130596
Bpz9t8jjfh
Input 400/3/50hz
Belt drive Yes
CFM 14
PSI 150
Length 1500mm
Width 450mm
Height 1000mm
Nett weight actual. 140 Kgs.
GMF Robotics Fanuc A05B-2051-C102 CRT/KB Unit Operator Panel , used, normal signs of wear, 100% functional
Nnslz
feed pressure 10 bar
liter capacity 24,5 l
Receiver 270 L
total power requirement 24,5 kW
weight of the machine ca. 2940 t
dimensions of the machine ca. 11 m
Oezt2
Temperating machine , Make Single Temperiertechnik GmbH (D), Type STO1-18-25-S, . 83918, Material Mild steel, Heating capacity 18 kW, Electric capacity 20 kW 380 Volt, With temperature controller , Year of construction unknown, Mounted on wheels , With switch , Floorspace 0,8x0,5 M, Total height 0,8 M, Weight 140 Kg What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are w...
feed pressure 10 bar
Effective free air delivery 700 L/min
motor 400 V
0 250 Liter
weight of the machine ca. 335 kg.
total power requirement 5,5 kW
dimensions of the machine ca. 1820 x 550 x 1400 mm
** Exhibition machine / not yet in use
** new BOGE SOLID model series
** List price: 7.430 euros
** Made in Germany
Furnishing:
- with container and dryer / can be used immediately
- Microprocessor control SOLIDcommand
- Network pressure sensor
- Belt-driven drive system
- low compressed air temp...
Field of application: Construction
Make of engine: Yanmar 3IRH8N
Bmb0lz08kw
Capacity: 3,1 m³/m
Technical condition: average
Compressor type: Screw compressors
Working pressure: 7 bar
800 mm
weight of the machine ca. 459 kg
Bjdme3ct70
Fujitsu Fanuc A02B-0048-CO12 MD1/CRT Unit , ser. no. K658, normal signs of wear, 100% functional
B0k8bpxi
feed pressure 10 bar
Bloripupqb
liter capacity 1,0 m³/min
total power requirement 7,5 kW
weight of the machine ca. 0,2 t
dimensions of the machine ca. 965 x 662 x 1045 mm
Temperating machine , Make Tool-Temp (CH), Type TT-162 E, . 98-14331, Material Mild steel, Electric heating , Electric capacity 13 kW 400 Volt, With control , Year of construction unknown, With switch , Floorspace 0,x,3 M, Total height 0,9 M, Weight 120 Kg What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are welcome to inspect our machines in Barneveld, The Netherlands....
Reciprocating compressor, compressor
-Working pressure: 1 bar
-Motor power: 0.37 KW
-Voltage: 220/380 volts
-Speed: 2780 rpm
-Price: per piece
-Number: 2 pieces
-Dimensions: 300/240/H245 mm
Harbdlb
-Weight: 12 kg
Field of application: Construction
Empty weight: 3.500 kg
Make of engine: Caterpillar
Capacity: 20,4 m³/m
Bnc7072jnw
Compressor type: Screw compressors
Working pressure: 12 bar
feed pressure 10 bar
intake capacity 650 L/min
Effective free air delivery 520 L/min
Receiver capacity 270 Ltr.
motor 400 Volt 50 Hz
power capacity 4,0 kW
** Exhibition machine / not yet in use
** List price: 3.050 euros
2-stage oil-lubricated high-performance compressor with proven
Two-cylinder technology. Very low speed and special
quiet, low-vibration mode of operation. As a result, less
Wear and tear and longer service life
Furnishing:
Bfgmjieuiq
- stationary piston compressor with supe...
Fanuc A860-0056-T020 Tape Reader Unit , used, normal signs of wear, 100% functional
Bfck0n2vsd
Temperating machine , Make BOE-THERM, Type BT TEMP 10.62 Vac., . 43588, Working pressure 440 Bar, Water heater , Heating medium: water, Electric capacity 6 KW, Temperature 10-95 Degr.C., Tank capacity 17 Ltr, With pump , Motor 1,1 KW, With temperature controller , Year of construction 1996, With switch , Floorspace 0,6x0,3 M, Total height 0,7 M, Weight 44 KG What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipp...
Hydraulic pump, oil pump, hydraulic power pack, hydraulic pump, hydraulic pump, electric motor, DC motor, traction motor, drive motor
-Motor type:
-Pump type: 1 515 500 013
Be3vh28230
-from forklift Still type: EFG 1.0/5002
-Dimensions: Ø 185/H 380 mm
-Weight: 34 kg
Field of application: Construction
Empty weight: 4.500 kg
Make of engine: CAT C9DI
Capacity: 23,5 m³/m
Compressor type: Screw compressors
Transport dimensions (LxWxH): 4x2x2
Working pressure: 12 bar
Bmsrp7t7kj
feed pressure 10 bar
Effective free air delivery 890 L/min
motor 400 V
0 500 Liter
weight of the machine ca. 295 kg.
dimensions of the machine ca. 1970 x 590 x 1300 mm
By2rum0z
** Exhibition machine / not yet in use
** List price: 4.520 euros
Furnishing:
- V-belt driven, robust, stationary piston compressor
- mounted on a horizontal 500 liter container
- for industrial applications
- solid construction
- High efficiency
- low-wear barrel
- Compressor pumps in two-stage design
- The container...
Fujitsu Fanuc A03B-0402-B001 Control Unit + A14B-0048-C00202 Power Unit + Siemens E321/21666 Control Panel, serial no. as per photo, used, normal signs of wear, 100% functional, scope of delivery as per photos
Wgi2tllj
