Used Machines with a clamping force of 250 - 999 kN for sale (287)

Condition: excellent (used), Year of construction: 2008, Injection molding machine BATTENFELD HM 60/350 S Year of manufacture: 2008 Injection elements: Screw diameter: 35 mm Injection weight : 153.8 g Injection pressure: 2083 bar Injection volume: 169 ccm Closure elements: Closing force : 60 t Clearance between columns: 370x320 mm Dimensions of table plates max: 550x530 mm Ejector: hydraulic Closing system: hydraulic Control: UNILOG B6 Additional equipment: Machine in very good technical condition Euromap 67 Dimensions: Weight: 3100 kg Ceb Esk Rnq No Rm Szsgt Length/Width/Height: 3.79x1.24x1.88 m Power supply: Pump/motor: 15 kW Heaters: 10.4 kW Total: 25.4 kW

Condition: excellent (used), Year of construction: 2008, Ferromatik Milacron Type: K-TEC 85-S Injection molding machine (85 tons) Serial number: 522500 Year of production: 2008 Cgob E Rsvk Dbzem Szet Machine weight: 5500 kg Screw diameter: 25 mm Closing force: 850 kN Working hours: 24.386h.

Condition: excellent (used), Year of construction: 2007, Functionality: fully functional, machine/vehicle number: 164225, clamping force: 600 kN, screw diameter: 35 mm, clearance between the columns: 450 mm, mold height (min.): 600 mm, plate width: 720 mm, TECHNICAL DETAILS Closure system: Hydraulic Closure force: 600 kN Plate size (table size): 720 mm Distance between the columns: 450 mm Cgjb E Rm Ssvzrhdszst Mold height: 600 mm Opening stroke: 900 mm Ejector stroke: 115 mm Ejector force: 125 kN Injection system Screw diameter: 35 mm Injection volume: 154 cm³ Injection pressure: 2,400 bar MACHINE DETAILS Total weight: 5,300 kg

Condition: excellent (used), Year of construction: 1997, Arburg 270 M-350-90 U Closing 35 TO year 1997 Scrow 25 mm tie bar spacing 27x27 Cjbeg S I S Ao E Rm Szogt

Condition: excellent (used), Year of construction: 1997, Clamping force: 80 t Screw diameter: 40 mm Cgebovfr U Ej E Rm Szst Type: Horizontal Drive: Hydraulic

Condition: used, Year of construction: 1994, operating hours: 32,628 h, Functionality: fully functional, machine/vehicle number: 67314, clamping force: 3 kN, We are selling an SGM that was only used in our company for sampling purposes. Cgsb E Rm Sou Ec Tcozjt No guarantee. No delivery.

Condition: excellent (used), Year of construction: 2012, Arburg 375 V 500-100 Vertical Injection Molding Machine Year of manufacture - 2012 Closing system : Closing force : 50 Ton Opening force max KN/mm: 40/250 Mould height, fixed / variable min. Mm: 200 Daylight of plates fixed/variable max. Mm: 450-550 Weight of the moving half of the mold max kg: 230 Ejector force/jump max. kN/mm: 30/70 Injection unit 100 Auger diameter : 20 mm Effective screw length l/d 25 Injection volume : 31 cm3 Cgeb E Roi Dahlem Szst Injection weight : 29 g /PS Machine weight3049 kg

Condition: used, Year of construction: 1996, operating hours: 54,800 h, Functionality: fully functional, clamping force: 250 kN, screw diameter: 25 mm, overall weight: 2,900 kg, Engel 25 tons incl. Engel picking robot Max opening distance: 248mm Max ejection distance: 100mm Distance between tie bars: Tie bar free Cebst Dw Ikj E Rm Szjgt Mold table size: W 550mm H 430 mm Mold ring size: 100mm Water battery: 4 channels, Also sits cooling block with 4 channels. Core features: Program available. No sockets Socket for color doser: Yes Interface: Only for Engel's own picking robot. Hot runner control: No Electrical outlets on machine: 3 single phase. 4 x 3-phase.

Condition: ready for operation (used), Year of construction: 2005, Functionality: fully functional, machine/vehicle number: 7154 - 0118, clamping force: 800 kN, clearance between the columns: 750 mm, opening stroke: 500 mm, plate length: 590 mm, plate width: 600 mm, TECHNICAL DETAILS Control: NC 4 control, DIAS Cgsb E Rmovzrf Ns Szot Closing system: Hydraulic Closing force: 800 kN Distance between columns: 420 mm x 420 mm Plate dimensions: 590 mm x 600 mm Mold size (min.): 250 mm Bar width: 420 mm Maximum opening distance: 500 mm Maximum distance between plates: 750 mm Two-component system Horizontal system: Nitrided screw, diameter 18 mm Vertical system: Bimetallic screw, diameter 25 mm MACHINE DETAILS Motor power: 18.5 kW Heating power: 8.8 kW Machine dimensions (L x W x H): 3.9 m x 1.4 m x 1.9 m Weight: 4,100 kg EQUIPMENT - Two-component injection molding machine with hydraulic closing system - Complete machine history available

Condition: excellent (used), Year of construction: 2003, Demag Ergotic system Closing 35 tons Csbsr Avfnj E Rm Szegt Year of manufacture 2003

Condition: like new (used), Year of construction: 2020, Clamping force: 25 ton Version: Shuttle table Cgsb E Rmsvl Skae Szjt Opening force/stroke min.- max. : 100/225 mm Mould height variable min.- max. : 122-222 mm Shuttle table stroke: 500 mm Wight on shuttle table. max. :120 kg Ejector force/stroke max. : 16/40 kN/mm Screw: 22 mm Effective screw length L/D : 20 Screw stroke max. : 90 mm Stroke volume: 34 cm3 Shot weight: 31 g Injection pressure: 2000 bar Working hours: 7397 h

Condition: good (used), Year of construction: 2004, VC330-80 plus Year: 2004 Cgeb E Rsvdqbhsm Szet Clamping force : 800kn Injection Unit 330 Control unit CC200 A01 Screw D40 Working hours 91112 1x corepull 4x digital input 4x digital output 1x signe pahse socket 1x trhee phase socket NEW PUMP

Condition: excellent (used), Year of construction: 2005, Demag Multi 80/420-80h/120v injection molding machine - 2K machine Year of production: 2005 Control type: NC 4 Control Closing system: Hydraulic TECHNICAL DATA Closing force: 800 kN Clearance between columns: 420 mm x 420 mm Plate dimensions: 590 mm x 600 mm Mould size: min 250 mm Maximum opening path: 500 mm Maximum distance between plates: 750 mm Two-component machine 1/Horizontal nitrided system, screw diameter 18 mm 2/Vertical system, bimetallic screw diameter 25 mm Full machine history available Cgsb Ejvuzz Hj Rm Szst GENERAL DATA Motor: 18.5 kW Heaters: 8.8 kW Dimensions L x W x H: 3.9 m x 1.4 m x 1.9 m Weight: 4100 kg EQUIPMENT Language: German

Condition: new, Year of construction: 2023, Functionality: fully functional, machine/vehicle number: 61037337, clamping force: 800 kN, screw diameter: 30 mm, displacement volume: 113 cm³, injection pressure: 2,500 bar, injection weight: 103 g, mold height (min.): 400 mm, ejector force: 22,600 N, ejector stroke: 150 mm, opening stroke: 900 mm, total length: 3,960 mm, total width: 1,480 mm, total height: 2,020 mm, overall weight: 3,550 kg, heating capacity: 10.9 kW (14.82 HP), drive type: Hadraulisch, clear span: 470 mm, tool weight: 1,000,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The fully hydraulic CX series offers a particularly compact, efficient and flexible two-platen machine. The very compact two-platen concept with cantilevered clamp offers generous space for peripheral equipment and excellent accessibility. Efficient and intelligent energy management with BluePower servo drive continues to provide a powerful basis for the highest demands and the right solution for every application. TECHNICAL DATA: KM 80 / 380 CX G06 (order 38655610) CONTROL  MC 6 with 21.5" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Mold opening force, max kN 55  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 670 x 670 Cob E Rm Soud N Hdjzogt  Tool installation height min. - max. mm 400 (increased by 150 mm)  Opening width mm 900 (increased by 150 mm)  Mold opening stroke max. mm 500  Hydraulic ejector drive  Ejector stroke mm 150  Ejector force forwards/backwards kN 22.6 / 9.8  Ejector speed forwards/backwards mm/s 760 / 800  Max. Mold weight kg 1000 SPRING UNIT  Screw diameter / type mm 30 / standard (customization possible)  Effective Ls/D ratio 26.7  Injection pressure bar 2500  Stroke volume cm³ 113  Shot weight at max. stroke for PS g 103  Injection speed mm/s 100  Injection flow rate cm³/s 71  Screw drive/speed 1/min 295  Plasticizing flow (standard) g/s 12.3  Nozzle contact force kN 50 ELECTRICAL PARAMETERS Connected load kW 15.0  Installed heating capacity kW 10.9  Power supply V / Hz 380 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 3.55  Length x width x height m 3.96 x 1.48 x 2.02 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  1 additional temperature control point for nozzle heating  Air valve 1 - compartment (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Hydraulic core pull 1 - compartment (BWAP)  Euromap interface handling E18, E63  Euromap interface (central computer) E67, E77  Adaptive Process Control (APC)  Injection stamping circuit  Graphic analysis package The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Condition: good (used), Year of construction: 1998, Clamping force: 800 kN, Screw diameter: 40 mm, Stroke volume: 204 cm³, Injection volume: 131 cm³/s, Screw speed: 310 1/min, Plasticizing capacity max.29 g/s, Nozzle pressure: 84 kN, Nominal power of pump motor: 15 kW, Installed heating power: 12 kW, Adjustable barrel heating zones: 5, Drying cycle rate: 2000 1/h, Tank capacity: 270 ltr, Machine dimensions approx.: 4.10 m x 1.40 m x 2.02 m, Total weight of machine: 3500 kg, Weight of mold: 860 kg Ceb E Rm Seuc Szzezogt

Condition: ready for operation (used), Year of construction: 2001, Krauss Maffei KM 5C WIN Grinding force 50 tons Year 2001 Screw diameter 25mm Cob E Rm Sjix N Trezogt Injection weight 56 g

Condition: excellent (used), Year of construction: 2004, Clamping force: 25/35 tons Opening stroke: 200 mm Mould height: 150-300 mm Clamping platen daylight: 350-500 mm Tie bar daylight: 221 mm Mould clamping plattens (b x h) : 342 x 250 mm Ejector stroke: 60 mm Cgeb E Rm Seuykh Dszst Screw diameter: 30 mm Screw stroke: 100 mm Injection volume: 70 cm3 Shot weight: 59 g Injection pressure: 1040 bar Working hours: 34.748

Condition: like new (used), Year of construction: 1994, Vertical machine Clamping force: 350kn Screw D:25 Working hours: ONLY 8.000h All technical information on pictures. Cjb E Rm Sepcf Dcjzjgt

Condition: excellent (used), Year of construction: 2007, Functionality: fully functional, machine/vehicle number: 164173, clamping force: 400 kN, screw diameter: 30 mm, clearance between the columns: 550 mm, injection pressure: 1,451 bar, TECHNICAL DETAILS Control: CC 200 Clamping force: 400 kN Dimensions of the mounting plates (h x v): 550 mm x 430 mm Mold height (min.): 180 mm Cgob E Rmsvpg T De Szst Maximum opening width: 530 mm Injection unit Screw diameter: 30 mm Injection volume: 99 cm³ Injection pressure: 1,451 bar MACHINE DETAILS Rated power of the pump motor: 15 kW Net weight with control cabinet: 2.7 t Dimensions (L x W x H): 3.26 m x 1.2 m x 1.8 m

Condition: new, Year of construction: 2023, Functionality: fully functional, machine/vehicle number: 61036946, clamping force: 800 kN, screw diameter: 40 mm, displacement volume: 201 cm³, injection pressure: 1,860 bar, injection weight: 183 g, mold height (min.): 150 mm, ejector force: 22,000 N, ejector stroke: 100 mm, opening stroke: 750 mm, installation height: 400 mm, total length: 4,750 mm, total width: 1,670 mm, total height: 1,850 mm, overall weight: 5,600 kg, heating capacity: 11.5 kW (15.64 HP), drive type: Vollelektrisch, clear span: 735 mm, tool weight: 600,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The basic injection molding machine, precisionMolding, offers the perfect entry-level solution for all-electric injection molding, enabling you to react quickly and innovatively to market requirements. It combines high performance, simple operation and short delivery times. It can be used in a wide range of applications, e.g. in the packaging industry, the electrical and electronics industry, medical technology and the automotive industry. Your benefits: - Optimized price-performance ratio for a wide range of applications - High energy efficiency thanks to all-electric machine concept - Realization of demanding delivery times thanks to basic machine concept with a wide range of options TECHNICAL DATA: KM 80 / 380 PA G01 (order 38670023) CONTROL  MC P1 with 15" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Mold opening force, max kN 120  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 610 x 560  Tool installation height min. - max. mm 150 - 400  Opening width mm 750  Mold opening stroke max. mm 350 Ceb E Rjud H Dmom Szsgt  Ejector drive electric  Ejector stroke mm 100  Ejector force forwards/backwards kN 22 / 22  Ejector speed forwards/backwards mm/s 300 / 300  Max. Mold weight kg 600 SPRING UNIT  Screw diameter / type mm 40 / standard  Effective Ls/D ratio 20.0  Injection pressure bar 1860  Stroke volume cm³ 201  Shot weight at max. stroke for PS g 183  Injection speed mm/s 200  Injection flow rate cm³/s 251  Screw drive/speed 1/min 334  Plasticizing flow (standard) g/s 24.7  Nozzle contact force kN 34 ELECTRICAL PARAMETERS  Connected load kW 20.6  Installed heat output kW 11.5  Power supply V / Hz 400 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS  Net weight with switch cabinet t 5.6  Length x width x height m 4.75 x 1.67 x 1.85 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  Air valve 1 - fold (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Electrical interface cascade 4-fold  Euromap interface handling E18, E63  Euromap interface (central computer) E67, E77  Water battery 4 - compartment  Automatic central lubrication  Adaptive Process Control (APC)  Spray embossing circuit  Graphic analysis package The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Condition: ready for operation (used), Year of construction: 2001, Engel ES 200/75 HL Closing 75 tons Cgob E Rsvzhmiem Szot Year 2001 Scrow 35 mm

Condition: good (used), Year of construction: 2000, Clamping force: 25/35 tons Opening stroke: 200 mm Cgsb E Rorr H T Tjm Szot Mould height: 150-300 mm Clamping platen daylight: 350-500 mm Tie bar daylight: 221 mm Mould clamping plattens (b x h) : 342 x 250 mm Ejector stroke: 60 mm Screw diameter: 20 mm Screw stroke: 100 mm Injection volume: 31 cm3 Shot weight: 26 g Injection pressure: 2350 bar Working hours: 42.036

Condition: excellent (used), Year of construction: 2000, Battenfeld BA600V/125H-R Cgeb Esvzcv Ej Rm Szot Closing 60 tons Scrow 30 mm Injection weight 77.1g Year 2000 Operating hours 13184 ST

Condition: excellent (used), Year of construction: 2000, Clamping force: 25/35 tons Opening stroke: 200 mm Mould height: 150-300 mm Clamping platen daylight: 350-500 mm Tie bar daylight: 221 mm Mould clamping plattens (b x h) : 342 x 250 mm Ejector stroke: 60 mm Screw diameter: 20 mm Screw stroke: 100 mm Injection volume: 31 cm3 Shot weight: 26 g Injection pressure: 2350 bar Ceb Ejrrn U Te Rm Szsgt Working hours: 34.748

Condition: excellent (used), Year of construction: 2004, Angel Victory 330/80 Phoenix Closing 80 tons Cebovy Itts E Rm Szsgt Year of manufacture 2004 Scrow 40mm Plus sprue picker Wittman W702 X-100. Y-700. Z-90 Year of manufacture 2013