Used circular saws for light metal and aluminium - half-automatic for sale (69)

Condition: excellent (used), Year of construction: 2005, saw blade diameter 360 / 400 / 425 mm cutting diameter 10 - 140 mm cutting speed 8 - 150 m/min required cooling water max. 40 l/min height of material-table 950 mm max. travel between columns 680 mm control Siemens Simatic total power requirement 28 kW weight of the machine ca. 4,2 t dimensions of the machine ca. 2,8 x 1,8 x 2,2 m Hnedpjvzt Eqjfx Ag Ujg

Condition: new, Tubend aluminum circular saw / underfloor saw AC 400 Special equipment included in the price: Pneumatic vertical and horizontal clamping by 4 clamping jacks Minimum quantity lubrication 3m roller conveyor Description saw blade diameter: 400 x 32 x 4 mm speed 3000 rpm cutting area 90° rectangular 150 x 100 mm Hnjdpfx Ajkckgvjg Uog Cutting area 90° square 120 x 120 mm Cutting area 45° rectangular 130 x 80 mm Cutting area 45° square 100 x100 mm Operating pressure 6 - 8 bar Operating voltage 380 V Total power requirement 1,5 kW Machine weight approx. 140 kg

Condition: ready for operation (used), Kaltenbach SKL light metal circular saw 380 Volt saw blade diameter 350mm Hnedpfxogfb Hke Ag Uog mitre left+right 30 fence adjustable

Condition: new, MEP COBRA 352 SX evo [Semi-automatic] Article number CB352SX motor power 1,5/2,2 kW belt opening 180 mm belt dimensions 350x32x3,4 Weight 285 Kg Speed 1700/3400 1/min. Cutting surface 0° 120 / 105 / 180x70 Cutting surface 45° right 120 / 100 / 135x60 Cutting surface 45° left Cutting surface 60° right Cutting surface 60° left Description Semi-automatic circular saw for sawing of solid and hollow aluminum materials and light alloys with electro-welded carbide tooth wheel. Basic equipment: -Machine for miter cuts from 45° right to 45° left. -Alignment along the vertical gives the possibility of sawing operations with head inclined between 0° and 45° left. -* MEP represents the latest generation of controls designed for semi-automatic machines with single axis microprocessors. -CHARACTERISTICS: At the start of the cycle: - Vise closes and motor starts - Saw head lowers for cut - Motor stops - Saw head raises - Vise opens. -New - Display with 16 characters x 2 lines for displaying the following technical parameters: + number of executed cuts + cutting time + ammeter + display of over 100 diagnostic messages and warnings. -New - Display and entry of the alarm and error messages with the possibility of displaying the incidents that have occurred. Electrical equipment: -New - Low voltage control panel: membrane polyester keypad with thermoformed and highlighted push buttons and actuation control signal. -Saw blade stroke programmable directly from the control panel, to adapt to the cutting material. Hsdpfx Aschkv Ijg Usng -Ball bearing mounted rotary table to ensure easy and accurate rotation. -Clamping system consisting of two face vices that can be freely arranged along the longitudinal axis of the parts. -Adjustable mechanical stops for quick positioning of the head in the angular positions at 0° and 45° right and left. -Swarf extractor with preparation for OPTIONAL extraction system. -Automatic saw blade lubrication system, operating only at the start of the cut. -Machine is supplied without saw blade. -Preparation for the installation of the minimal lubrication kit of the saw blade (OPTIONAL), besides the conventional standard lubrication with emulsion oil. -Tool and instruction manual with spare parts list. For further technical data, please refer to the attached PDF document. Catalog 2nd page !

Condition: new, Year of construction: 2024, Underfloor light metal circular saw Make: METALLKRAFT Model: ULMS 420 Item no.: 3627420 Condition: New machine Cutting area (square): 120 x 120 mm Speed: 2900 rpm equipped as standard with: Hedotuch Eopfx Ag Ujng - Saw blade 420 x 30 x 4.0 mm Z 120 - minimum quantity lubrication system - Compressed air gun and spiral hose - Two extraction sockets for connection to an extraction system - Operating instructions

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 450 ALÜMİNYUM VE PVC PANJUR KUTU VE LAMEL KESİM MAKİNASI ( Ø550 mm ), • Designed for bundle cutting of roller shutter slats, setwise cutting of roller shutter boxes, cutting of side rails and set cutting of monoblock roller shutter boxes. • Clean surface cutting thanks to high saw speed • Roller conveyor system, right and left 3 meters each, 2 units • Saw cutting speed is adjustable Hsdporamzfefx Ag Uong • All roller shutter boxes up to a maximum of 350 mm can be cut • Precise cutting thanks to the linear guide system • Saw blade diameter Ø550 mm OPTIONAL • Cooling system • Capability to operate with digital meter

Condition: new, Year of construction: 2024, Aluminum circular saw UK 800 HA, semi-automatic The UK 800 HA semi-automatic circular saw is an "upcut" machine and is used predominantly Used to cut profile materials made of cast aluminum, copper and hard plastics (limited solid material). The machine is characterized by easy handling and fast easy changing of the material as well as easy adjustment of the miter angle. The UK 800 HA has an infinitely adjustable miter range left and right up to 20° (pivoting range twice 70°). The saw feed takes place independently at the push of a button, the material is clamped takes place via two pneumatically controlled vertical and horizontal clamping cylinders. By default this machine includes a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Of Furthermore, this machine can optionally be equipped with a digital miter angle display, a marking laser and pneumatics to lift the protective hood! equipment Double miter 20° - 90° - 20°, large support plate, powerful drive motor Two-button control for triggering the saw cut (optionally also available as a one-button control) Clear control panel Sheet or cutting feed adjustable Two vertical and two horizontal pneumatic clamping cylinders Hydropneumatic lifting of the saw blade, with oil level indicator Fixed material feed jaw can be used to enlarge the cutting performance can be shifted backwards large protective hood, covers the entire work area Minimum lubrication system with 2 liter reservoir Air gun to clean the machine Saw blade ø 800 mm workflow 1. Setting the cutting angle 2. Inserting the material 3. Adjusting the lifting speed 4. Bring the clamping cylinder up to 20 mm on the material 5. Clamp the material 6. By pressing the Start button, the machine is ready for use. 7. Press and hold the two SAWS keys, das Material is sawn. 8. When the cycle is complete, release both SAW buttons and the Press the STOP button 9. Open the vice and remove or push the material further Hjdpfx Agoidun Is Usng It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: new, Tubend aluminum circular saw / underfloor saw AC 550 Hodpfjkckx Uox Ag Ujng Special equipment included in the price: Pneumatic vertical and horizontal clamping by 4 clamping jacks Feed of the saw blade steplessly adjustable Minimum quantity lubrication 3m roller conveyor Description saw blade diameter: 550 x 32 x 4 mm speed 3580 rpm Cutting area 90° rectangular 260 x 200 mm Cutting area 90° square 155 x 155 mm Cutting area 45° rectangular 180 x 200 mm Cutting area 45° square 130 x130 mm Operating pressure 6 - 8 bar Operating voltage 380 V Total power requirement 3 kW Machine weight approx. 250 kg

Condition: ready for operation (used), Year of construction: 1992, - Double mitre circular saw ADS type M - 2 saw heads Hedpfx Aeucuhdog Usng - max. saw length 5000mm

Condition: new, Year of construction: 2024, Aluminum circular saw UK 600 HA 90°, semi-automatic The semi-automatic circular saw UK 600 HA 90° is an "upcut" machine and is mainly used for cutting used for cutting profile materials made of cast aluminum, copper and hard plastics (limited solid material). The machine is characterized by easy handling and quick and quick and easy change of material. Only 90° cuts are possible with this machine! The saw feed takes place automatically at the touch of a button, the material is clamped via two pneumatically controlled vertical and horizontal clamping cylinders. This machine comes with a minimum lubrication system and an air spray gun for cleaning the machine as standard! Connections for a chip extraction system are available on this machine. Furthermore, this machine can be optionally equipped with a digital mitre angle display, a scribing laser and pneumatics for lifting the protective hood! be equipped! Equipment Large support table, powerful drive motor Two-button control for triggering the saw cut (optionally also available as one-button control) Clearly arranged control panel Two vertical and two horizontal pneumatic clamping cylinders Hydropneumatic lifting of the saw blade, with oil level indicator Fixed material feed jaw can be moved backwards to increase the cutting cutting capacity can be moved to the rear Hjdopa Nxdopfx Ag Uong Large protective hood covers the entire working area Minimum lubrication system with 2 liter reservoir Adjustable blade and cutting feed Air gun for cleaning the machine Saw blade ø 600 mm Work sequence 1. setting the cutting angle 2. inserting the material 3. adjusting the stroke speed 4. bring the clamping cylinder to within 20 mm of the material 5. clamp the material 6. press the The machine is ready for operation by pressing the start button. 7. press and hold the two SAW buttons, the material is sawn. 8. 8. at the end of the cycle, release both SAW buttons and press the STOP button 9. 9. open the vice and remove or push the material forward Technical data such as cutting range, power, etc. (see data sheet attached). Plantec Maschinen GmbH

Condition: new, Year of construction: 2024, The semi-automatic circular saw UK 352 HA is an "upcut" machine and is mainly used to cut profile materials made of cast aluminium, copper and hard plastics (requires solid material). The machine is characterized by easy handling and fast, convenient changing of the material as well as simple adjustment of the miter angle. The UK 352 HA has an infinitely adjustable miter range of up to 45° on the left and 0° on the right. The saw feed takes place automatically at the push of a button, the material is clamped using two pneumatically controlled vertical clamping cylinders. This machine comes standard with a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Hsdpfx Ajgwt Rveg Usng

Year of construction: 2023, condition: new, The UK 500 HA semi-automatic circular saw is an "upcut" machine and is mainly used to cut profile materials made of cast aluminium, copper and hard plastics (requires solid material). The machine is characterized by easy handling and fast, convenient changing of the material as well as simple adjustment of the miter angle. The UK 500 HA has an infinitely adjustable miter range of up to 30° on the left and 0° on the right. The saw feed takes place independently at the push of a button, the material is clamped via two pneumatically controlled vertical and horizontal clamping cylinders. This machine comes standard with a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Furnishing Hnedpfx Agsgwt R Do Ujg • Precision underfloor circular saw • Miter adjustment 0º/ 45º/ 90º/ -45º / -60º continuously • incl. 2 pneumatic vices (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) • Suction device-swarf extraction system • Mist spray device for air-oil cooling • Air gun with spiral hose • incl. maintenance unit with pressure reducer • Ergonomically arranged control panel • maximum cutting height 180 mm • Saw blade 500mm • Saw blade not included! It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: new, Year of construction: 2024, Aluminum circular saw BC 450 HA, semi-automatic (MG FRONT-450) The BC 450 HA is a double miter saw with a swivel range of 45° to the left and 22.5° to the right and an automatic mitre adjustment via stop functions. The saw stroke runs automatically and the material is clamped pneumatically. The saw blade (450 x 30 mm) runs horizontally. can also be optionally equipped with a digital mitre angle display, a scribing laser and pneumatics for lifting the protective hood! Equipment Double mitre machine with powerful drive motor Two-button control for triggering the saw cut (optionally also available as one-button control) Large mitre range from -22.5° to +45°, Swivel range 67.5° - 0° - 45° Automatic miter adjustment, fixed stop functions at -45° / 90° / +45° and two variable stop functions adjustable to the desired angle! Two horizontal pneumatic clamping cylinders Clearly arranged control panel Hjdpfx Aepa Nxajg Ueng Large protective hood covers the entire working area, is lifted pneumatically Adjustable blade and cutting feed Connections for extraction system Minimal lubrication system Air gun for cleaning the machine Saw blade ø 450 mm Work sequence 1. setting the cutting angle 2. inserting the material 3. adjusting the stroke speed 4. bring the clamping cylinder to within 20 mm of the material 5. clamp the material 6. press the The machine is ready for operation by pressing the start button. 7. press and hold the two SAW buttons, the material is sawn. 8. 8. at the end of the cycle, release both SAW buttons and press the STOP button 9. 9. open the clamping vice and remove or advance the material Plantec Maschinen GmbH

Year of construction: 2023, condition: new, The semi-automatic circular saw UK 352 HA is an "upcut" machine and is mainly used to cut profile materials made of cast aluminium, copper and hard plastics (requires solid material). The machine is characterized by easy handling and fast, convenient changing of the material as well as simple adjustment of the miter angle. The UK 352 HA has an infinitely adjustable miter range of up to 45° on the left and 0° on the right. The saw feed takes place automatically at the push of a button, the material is clamped using two pneumatically controlled vertical clamping cylinders. This machine comes standard with a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Furnishing • Precision underfloor circular saw • Miter adjustment left 45º / 90º / right-45º degrees • incl. 2 pneumatic vices (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) • Suction device-swarf extraction system • Mist spray device for air-oil cooling • Air gun with spiral hose Hnodpjgwt Rysfx Ag Uog • incl. maintenance unit with pressure reducer • Ergonomically arranged control panel • maximum cutting height 125 mm • Saw blade 350mm • Saw blade not included!

Condition: new, Year of construction: 2024, Aluminum circular saw UK 650 HA, semi-automatic The UK 650 HA semi-automatic circular saw is an "upcut" machine and is used predominantly Used to cut profile materials made of cast aluminum, copper and hard plastics (limited solid material). The machine is characterized by easy handling and fast easy changing of the material as well as easy adjustment of the miter angle. The UK 650 HA has an infinitely adjustable miter range left and right up to 20° (pivoting range twice 70°). The saw feed takes place independently at the push of a button, the material is clamped takes place via two pneumatically controlled vertical and horizontal clamping cylinders. By default this machine includes a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Of Furthermore, this machine can optionally be equipped with a digital miter angle display, a marking laser and pneumatics to lift the protective hood! Hjdpfxoidun Ds Ag Ujng equipment Double miter 20° - 90° - 20°, large support plate, powerful drive motor Two-button control for triggering the saw cut (optionally also available as a one-button control) Clear control panel Sheet or cutting feed adjustable Two vertical and two horizontal pneumatic clamping cylinders Hydropneumatic lifting of the saw blade, with oil level indicator Fixed material feed jaw can be used to enlarge the cutting performance can be shifted backwards large protective hood, covers the entire work area Minimum lubrication system with 2 liter reservoir Air gun to clean the machine Saw blade ø 650 mm workflow 1. Setting the cutting angle 2. Inserting the material 3. Adjusting the lifting speed 4. Bring the clamping cylinder up to 20 mm on the material 5. Clamp the material 6. By pressing the Start button, the machine is ready for use. 7. Press and hold the two SAWS keys, das Material is sawn. 8. When the cycle is complete, release both SAW buttons and the Press the STOP button 9. Open the vice and remove or push the material further It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: new, Year of construction: 2024, The semi-automatic circular saw UK 352 HA is an "upcut" machine and is mainly used for cutting profile materials made of cast aluminum, copper and hard plastics (limited solid material). The machine is characterized by easy handling and fast, convenient material changes as well as simple mitre angle adjustment. The UK 352 HA has a continuously adjustable mitre range of up to 45° on the left and 0° on the right. The saw feed is automatic at the touch of a button and the material is clamped using two pneumatically controlled vertical clamping cylinders. This machine comes with a minimum lubrication system and an air spray gun for cleaning the machine as standard! Connections for a chip extraction system are available on this machine. Hnjdegwt Rrepfx Ag Ujg Equipment - Precision underfloor circular saw - Mitre adjustment left 45º / 90º / right-45º degrees - incl. 2 pneumatic clamping vices (vertical) - Saw blade feed infinitely adjustable - Two-hand safety control - Adjustable material stop (rear) - Extraction device - chip extraction system - Mist spraying device for air-oil cooling - Air gun with spiral hose - incl. maintenance unit with pressure reducer - Ergonomically arranged control panel - Max. cutting height 125 mm - Saw blade 350 mm - Saw blade not included in scope of delivery! It is possible for you to view the desired system in our production/demonstration hall at any time. Please do not hesitate to contact us. Plantec Maschinen GmbH

Condition: new, Year of construction: 2024, pressure: 6 bar, The UK-600-A semi-automatic circular saw is an "upcut" machine and is mainly used to cut profile materials made of cast aluminium, copper and hard plastics (requires solid material). The machine is characterized by easy handling and fast, convenient changing of the material as well as simple adjustment of the miter angle. The UK-600 A has an infinitely adjustable miter range left and right up to 20° (swivel range two times 70°). The saw feed takes place independently at the push of a button, the material is clamped via two pneumatically controlled vertical and horizontal clamping cylinders. This machine comes standard with a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Furthermore, this machine can optionally be equipped with a digital miter angle display, a marking laser and pneumatics for lifting the protective hood! Hnjdpfjgcbwgsx Ag Usg

Condition: new, Year of construction: 2023, Miter setting horizontally 15°- 90°15° infinitely variable saw motor 5.50 KW (400 volts) saw blade 600 mm traversing range rear stop 180 mm working height 940 to 1000 mm adjustable via feet 2 x suction nozzles (above in the hood and below) net weight 600 kg WxDxH 135x140x150 cm RAL 9007 gray aluminum rotary plate polished nickel steel Saw head with recirculating ball guides designed with high accuracy and long service life and high rigidity. Sawing material can be preloaded with low pressure when the hood is open. Hydropneumatic sheet feed Chip flow towards the extraction hood. Hnsdpefv T Anjfx Ag Usg

Condition: new, Year of construction: 2024, The UK-400-A semi-automatic circular saw is an "upcut" machine and is mainly used to cut profile materials made of cast aluminium, copper and hard plastics (requires solid material). The machine is characterized by easy handling and fast, convenient changing of the material as well as simple adjustment of the miter angle. The UK-400 A has an infinitely adjustable miter range left and right up to 20° (swivel range twice 70°). The saw feed takes place independently at the push of a button, the material is clamped via two pneumatically controlled vertical and horizontal clamping cylinders. This machine comes standard with a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Furthermore, this machine can optionally be equipped with a digital miter angle display, a marking laser and pneumatics for lifting the protective hood! Furnishing • Precision underfloor circular saw • Miter adjustment 0º/ 45º/ 90º/ -45º / -60º continuously • incl. 2 pneumatic vices (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) • Suction device-swarf extraction system • Mist spray device for air-oil cooling • Air gun with spiral hose • incl. maintenance unit with pressure reducer • Ergonomically arranged control panel • maximum cutting height 130mm • Saw blade 400mm Hnedogwt Rnepfx Ag Ueg • Saw blade not included! It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.