Semi-automatic aluminum circular saw

Plantec UK 600 HA

Condition: new, Year of construction: 2024, Aluminum circular saw UK 600 HA 90°, semi-automatic The semi-automatic circular saw UK 600 HA 90° is an "upcut" machine and is mainly used for cutting used for cutting profile materials made of cast aluminum, copper and hard plastics (limited solid material). The machine is characterized by easy handling and quick and quick and easy change of material. Only 90° cuts are possible with this machine! The saw feed takes place automatically at the touch of a button, the material is clamped via two pneumatically controlled vertical and horizontal clamping cylinders. This machine comes with a minimum lubrication system and an air spray gun for cleaning the machine as standard! Connections for a chip extraction system are available on this machine. Furthermore, this machine can be optionally equipped with a digital mitre angle display, a scribing laser and pneumatics for lifting the protective hood! be equipped! Equipment Large support table, powerful drive motor Two-button control for triggering the saw cut (optionally also available as one-button control) Clearly arranged control panel Two vertical and two horizontal pneumatic clamping cylinders Hydropneumatic lifting of the saw blade, with oil level indicator Fixed material feed jaw can be moved backwards to increase the cutting cutting capacity can be moved to the rear Large protective hood covers the entire working area Minimum lubrication system with 2 liter reservoir Adjustable blade and cutting feed Hsdpfxspa Nxdj Afnsnh Air gun for cleaning the machine Saw blade ø 600 mm Work sequence 1. setting the cutting angle 2. inserting the material 3. adjusting the stroke speed 4. bring the clamping cylinder to within 20 mm of the material 5. clamp the material 6. press the The machine is ready for operation by pressing the start button. 7. press and hold the two SAW buttons, the material is sawn. 8. 8. at the end of the cycle, release both SAW buttons and press the STOP button 9. 9. open the vice and remove or push the material forward Technical data such as cutting range, power, etc. (see data sheet attached). Plantec Maschinen GmbH

Condition: new, Mobile warehouse customized quotation Hnodpsxzrtpjfx Afneh

Condition: new, Year of construction: 2024, The UK-600-A semi-automatic circular saw is an "upcut" machine and is mainly used to cut profile materials made of cast aluminium, copper and hard plastics (requires solid material). The machine is characterized by easy handling and fast, convenient changing of the material as well as simple adjustment of the miter angle. The UK-600 A has an infinitely adjustable miter range left and right up to 20° (swivel range two times 70°). The saw feed takes place independently at the push of a button, the material is clamped via two pneumatically controlled vertical and horizontal clamping cylinders. This machine comes standard with a minimum lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. Furthermore, this machine can optionally be equipped with a digital miter angle display, a marking laser and pneumatics for lifting the protective hood! Hnodpfogwt S Esx Afnjh Furnishing • Precision underfloor circular saw • Miter adjustment 0º/ 45º/ 90º/ -45º / -60º continuously • incl. 2 pneumatic vices (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) • Suction device-swarf extraction system Othgf • Mist spray device for air-oil cooling • Air gun with spiral hose • incl. maintenance unit with pressure reducer • Ergonomically arranged control panel • maximum cutting height 230 mm • Saw blade 600mm • Saw blade not included! Our NC pusher system ensures that your machining parts are positioned at the desired machining position on our UK 600 HA 90°. A gripper clamps the material, the NC control positions the material automatically. The tension and the sawing process are then triggered. The positions are previously programmed into the program control. Once the machine tool has completed your machining, it automatically moves to the next sawing position. Depending on the processing part, several parts can also be clamped on top of each other/next to each other and positioned at the same time. It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: new, Year of construction: 2024, pressure: 8 bar, Miter setting horizontally 15°- 90°15° infinitely variable saw motor 5.50 KW (400 volts) saw blade 600 mm traversing range rear stop 180 mm working height 940 to 1000 mm adjustable via feet 2 x suction nozzles (above in the hood and below) net weight 600 kg WxDxH 135x140x150 cm RAL 9007 gray aluminum rotary plate polished nickel steel Saw head with recirculating ball guides designed with high accuracy and long service life and high rigidity. Sawing material can be preloaded with low pressure when the hood is open. Hydropneumatic sheet feed Chip flow towards the extraction hood. Furnishing • Precision underfloor circular saw • Miter adjustment 0º/ 45º/ 90º/ -45º / -60º continuously • incl. 2 pneumatic vices (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) • Suction device-swarf extraction system Othgf Hnedjgwt S Tjpfx Afnjh • Mist spray device for air-oil cooling • Air gun with spiral hose • incl. maintenance unit with pressure reducer • Ergonomically arranged control panel • maximum cutting height 230 mm Hxdcvds7y • Saw blade 600mm • Saw blade not included! Our NC pusher system ensures that your machining parts are positioned at the desired machining position on our UK 600 HA 90°. A gripper clamps the material, the NC control positions the material automatically. The tension and the sawing process are then triggered. The positions are previously programmed into the program control. Once the machine tool has completed your machining, it automatically moves to the next sawing position. Depending on the processing part, several parts can also be clamped on top of each other/next to each other and positioned at the same time. It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: new, Year of construction: 2026, Fully automatic cutting of medium-large aluminium profiles with simple-to-use automation. Put down any aluminium profile, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. For every piece of aluminium you place down to cut, no matter what length, a laser sensor measures its length. Our powerful optimisation algorithm on-the-fly calculates the best order of parts to produce minimum waste. The machine automatically cuts the calculated list without stopping. No need for any inputs from you, just keep putting in new aluminium stock. Simple, high-speed alternative to double-headed saws. Just enter (or import) the lengths and angles you need and press GO. The machine continuously produces your angled parts, accurately and at high speed. • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Bundled / multi-bar cutting and counting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Fully adjustable saw cutting and timber feeding rates for maximum process productivity. • Automatic optimiser mode with timber laser length measure and optimisation for minimum waste (optional). Hedpfof Eknnjx Afnsnh • Automatic labels printing for parts using data from the job list (manual label application, optional). • Inline direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). • Automated servo positioning of the saw mitre angle up to ±75° (optional). Highly suitable for: • Windows and doors manufacture • Mitered aluminium structures manufacture • Aluminium fabricated structures manufacture • Composites manufacture • Blinds, shades and furniture manufacture • Aluminium retail sales Model: A550 Length: 9 m Linear Unit: ProfiStop Alpha Material Length: 8580 mm Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

Condition: used, thread dia. M3 - M12 mm 400 U/min. 25 Nm Hnedpfjfg U Smox Afneh air pressure 6 - 8 bar working area Radius 1000 mm weight of the machine ca. 12 kg Demonstration machine! Pneumatically driven tapping machine for M3 - M12 thread with: - stable and flexible working arm. - 6 pcs. Quick-change chuck with slip clutch. Documentation in English !! optional: - Clamping table with T-slots clamping surface 900 x 600mm

Condition: new, turning diameter over bed 410 mm turning diameter over slide rest 240 mm turning length 1000 mm turning diameter in the gap 530 mm turning speeds 65 - 1810 U/min centre height 205 mm spindle bore 52 mm tailstock quill taper MT 4 total power requirement 2,2 kW weight of the machine ca. 0,9 t dimensions of the machine ca. 1,9 x 0,8 x 1,3 m Hnsdpfx Aem Rlb Njfnoh Center lathe with: 3-axis digital measuring system fully assembled electromagnetic main spindle brake auto. Feed in longitudinal and transverse direction safety relay Micrometer end stop coolant device 3-jaw lathe chuck with 1 set of turning and drilling jaws German operating instructions.

Condition: new, Year of construction: 2025, Cutting height at 90°: 170 mm Cutting length: 430 mm miter range horizontal: 45°-90°-25° Miter range vertical: 60° - 90° - 30° Pivot adjustment with crank: yes roller conveyor / support table: yes Saw blade diameter: 420 mm Speed: 2800rpm Engine power: 3 kW Motor brake: yes Suction connection: 100mm Hnsdeizkhvepfx Afnjh Length roller conveyor: 2 x 1500 mm Machine length: 4000 mm Machine width: 1250 mm Machine height: 1550 mm Weight:

Year of construction: 2010, condition: used, Mettler Toledo PAS 3012 check-weigher with labeling machine. Hedpfsivnqcox Afnsnh The labeling had can be electrically moved in all directions for an accurate positioning of the labels. - Max. weight: 6KG - Min. weight: 0.020KG - E: 0,001KG - Rated for 70 packs per minute

Condition: new, Horizontal Bending Machine Fastech FP 30 Description • Pressure: 30t • Stroke: 285mm • Max. tool height: 250mm • Flat bar on the tall edge: 200 x 18mm • Working speed: 10.0mm/sec • Return speed: 10.0mm/sec • Working height: 930mm • Table: 660 x 1250mm • Total power requirement: 3.0kW • Motor: 400 Volt 50Hz Hjdpfjfg Eu Uex Afnonh • Weight: 850kg • Dimensions (L-W-H): 1250 x 650 x 1250mm • Oil capacity: 40.0l Equipment: • Hydraulic horizontal bending machine • Solid work surface made of stabilized steel • Machine made from hardened and ground forged steel • Digital stroke adjustment display • 1x tool set • Double foot switch