2019 Fully Automated Bottled Filling, Capping and Labelling Line
Currently used with 30ml and 10ml Bottles
Very infrequent use filling CBD oil
Manufactured December 2019 by Shanghai Chengxiang Machinery
Change wheels can be purchased from the manufacturer for different site bottles
Line comprises: Feeder Turntable, Lid and Pipette Vibratory Feed, Filling and Capping with Siemens touch screen control, Labelling, Bottle Collecting Turntable
NORDEN NM 602 HA Plastic tube Filler
(second hand) serial no 1855
Norden 602 used change parts to fit supplied
Set of 18 tube holders, Tube tilter, Pusher cone,
Hot air nozzle and cooling ring
Tube lenght 55 – 180 mm
Tube diameter 19-35 mm
Tube material Plastic or Aluminium
Tablet diameter 16-30 mm
Tablet thickness 3-10 mm
Capacity Nominal up to 60 tubes a minute or 60000 tablets an
Voltage 3 x 400 V AC, zero and earth, 50 Hz
Power Approx. 2 kW
Compressed air 7-8 bar, approx. 500 L/minute
Weight Approx. 400 kg
The FKS-10CP suppository filling, cooling and sealing equipment for pre-formed moulded plastic packaging for suppositories.
In the year 2019 the plant mechanically and electronically was completely overhauled is as new.
Before delivery the plant is test-run using suppository, casings supplied by CP-Citopac GmbH
More technical details you found in the Datasheet.
Filling and capping system for aseptic and precise filling and capping of small bottles with small liquid volumes as used for eye drops, nasal sprays, nail polishes, esoteric oils etc. Dosing by piston pump. - Specifications filling and capping system: number of filling nozzles: 4; number of capping heads: 2; filling volume: max. 10ml/bottle; speed in neutral: max. 60 bottles/min; accuracy: = ± 1%; suitable bottles: glass, PP, PE, PVC; product contact parts from stainless steel 316L.
Unused Bosch Aseptic powder filling line, speeds up to 325 vials/minute, set up to fill 20 mL vials, .5 - 3.5 gram fills, 230/400 volt, 3 phase, Siemens S7 and Elau PacDrive controls, system built 2019, installed, commissioned with IQ/OC and not used. System includes:
Bosch Washer, model RRN 3085, for containers up to 30R(30mm diameter x 75mm high) or 20H(32mm diameter x 58mm high).
Bosch Tunnel, model HQL 8340S, 1200mm belt width, 1 loading/pre-heat module, (3) sterilizing modules, (4) steriliz...
FILLING MACHINE - Equipped with 8 filling nozzles with Inductive Flow Measurement
Can fill containers from 40ml up to 40Litres
Max height of the container : 400mm
Max width of the container : 270mm
Max throughput of the machine up to 150pcs/min
Total stand by hours : 17801
Total filling hours : 4296
CAPPING MACHINE: Rotating single servo spindle closing head, automatic cap descrambling and placement
Max height of the container : 350mm
Max width of the container 150mm
Output rate : 60p...
Fully automatic system for filling prefabricated molded plastic packaging (Unit Dose) for various media.
See attachment for models of packaging!
5,000 liquid packages per hour
depending on the container shape and the
Viscosity of the product.
1 - 10 ml (depending on the packaging)
The dosing range is set when the machine is at a standstill via the control unit of the dosing pump.
The entire system is constructed according to the requirements of hygienic design an...
Sample filling system of a disinfection liquid bottle filling line for smaller bottles with a filling volume of up to 100ml. The fully automatic filling process includes: Aligning and feeding of the bottles; filling with 2 to 8 filling heads and with high accuracy by anti-drip device; automatic alignment, feeding and capping of the lids / spray caps, single or double sided labeling of the bottles; outfeed and collection of the bottles to a collection table or to the next production station. -Spe...
Samples System to fill small bottles with small volume of liquid: Typical use is filling of eye drops, nail polish and other. Infeed by infeed line; possibly from an sorting system upstream (which is not included in this system). The system includes a container unscrambler, which sets the small bottles after the filling into an outfeed line. The system is PLC controlled. - Specifications: max. speed of the machine in neutral: 50 bottles/Minute; filling capacity: 20-60ml; 1.75kW; 6-8bar. All thes...
The Machineseeker Trust Seal enables buyers to quickly recognize whether they are dealing with a trustworthy seller.
What do we verify?
Check of trade licence or commercial register extract
Verification of the dealer's postal address
Validation of the banking details
Verification of accessibility to main phone number
Credit report may not contain negative criteria
Buyer complaints can lead to withdrawal of the seal
What does this mean for the seller?
After successful verification, we will include the seal awarded to you in your listings on Machineseeker. In this way, you signal to any potential buyer the independently verified seriousness of your company. This creates buyer confidence and increases the likelihood of successfully selling machines. In addition, you have the option of including the Maschinensucher seal of confidence on your homepage and letterhead.
Try our app for used machines now!
Machineseeker app for iPhone and Android.
All information, offers and prices on this website are subject to change and non-binding!
Designated trademarks belong to their respective holders.
Machineseeker Group GmbH does not assume liability for the content of linked external websites.