Used machining centers (vertical) X-axis travel 700-799mm for sale (210)

Condition: used, Year of construction: 2023, operating hours: 120 h, Almost like new, a Haas TRT210 two-axis rotary table with only approximately 120 operating hours. The table was used exclusively on a Haas VF-4 (see separate listing) and is in flawless optical and technical condition. The TRT210 is Haas’s compact 5-axis solution for medium-sized VMCs, and it takes up minimal space by being mounted at one end of the machine table – the rest of the mounting surface remains free for vises or other fixtures. Plug-and-play connection to any Haas milling machine with 4/5-axis drives and the corresponding NGC control software. In addition to the rotary table itself, the scope of supply includes the matching toe clamp kit for direct mounting on the machine table, as well as a Renishaw riser block for side mounting of the radio receiver (OMI/OMP) – this ensures reliable signal transmission to the measuring probe even over the full A-axis swivel range. Inspection possible by appointment. Shipping can be arranged. Technical data: - Table diameter: 230 mm (9.10") - Max. pitch circle: 368 mm (14.5") - Max. workpiece weight on table: up to approx. 90 kg - Hole pattern: 2× 6-hole pattern A-axis (swiveling): - Swivel range: ±120° - Max. speed: 80°/s - Max. torque: approx. 407 Nm (300 ft-lb) - Braking torque at 6.9 bar: approx. 540 Nm - Accuracy: ±25 arc-sec - Repeatability: 10 arc-sec - Resolution: 0.001° B-axis (rotating): - Rotation range: 360°/continuous - Max. speed: 100°/s Gkedpfx Aoy Tp Hgocijb - Max. torque: approx. 285 Nm (210 ft-lb) - Braking torque at 6.9 bar: approx. 270 Nm - Maximum runout: 0.013 mm (0.0005") - Accuracy: ±15 arc-sec - Repeatability: 10 arc-sec - Resolution: 0.001° General: - Connection voltage: 115 VAC, approx. 15 A - Compressed air max.: approx. 10 bar (150 psi) - Weight: approx. 220 kg Scope of supply: - Haas TRT210 rotary table complete - Original Haas servo connection cable for A and B axes - Toe clamp kit (for mounting on the machine table) - Renishaw riser block for side receiver mounting - Original documentation

Condition: excellent (used), Year of construction: 2019, Traverses X Y Z: 762 x 508 x 610mm, Gkedpfxjzh Hvxo Acieb Table 1020 x 510mm, Spindle speed 15,000 rpm, input 15Kw, Hurco Winmax 5 Control, Spindle taper BT40, 30 ATC, Coolant, Low volt light, Swarf Conveyor.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, This is the Haas equivalent of the Fanuc Robodrill and very impressive it is! Shown running on our race car components, we can help with training and setup if required pictures show components we are currently making on the DM2 5th Axis enabled Gjdpfxsydil Ne Aciekb 4th axis Interface, 5th axis Interface, Coolant, Interlocked guards, High speed machining enabled Low Volt Light, Programmable Coolant Nozzle, Remote Hand Wheel, Swarf Auger, Through Spindle Coolant, USB Port Control HAAS Machine Dimensions 2811 x 2463 x 2583mm Machine Weight 2427kg Max & Min distance from table to spindle 152 - 546mm Maximum Cutting Feedrate 30.5m/minute Maximum Tapping Capacity M12 (Aluminium) Maximum Tool Diameter 64mm Maximum Tool Diameter with Empty Adjacent Pockets 64mm Maximum Tool Length 178mm Maximum workpiece weight 113kg Memory 1Gb Rapid Feedrates 61m/minute Spindle Motor Power 40HP Spindle Speed 15000rpm T- Slots 3 x 16mm Table Size 864 x 381mm Tool Change Capacity 18 + 1 Tool Change Time (Chip to Chip) 1.6 seconds Tool Size BT40 Traverses XYZ 711 x 406 x 394mm

Condition: ready for operation (used), Year of construction: 2011, Tongtai / Topper TMV - 720 A / Fanuc OI-MD Vertical Machining Center - CE marking - Year of manufacture: 2011 - Control: Fanuc Oi-MD - Travel X / Y / Z: 720x480x530mm - Distance spindle nose / table: 100-630mm - Table size: 800x480mm - Max. table load: 500kg - Spindle taper: BT-40 - Spindle speed: 8000 rpm - Spindle motor: 7.5 / 5.5 kW - Rapid traverse X / Y / Z: 48 m/min each - Feed rate: 1-10000 mm/min - Tool changer: 24 positions - Tool change time (T-T): 3 sec - Max. tool weight: 7kg - Max. tool diameter: 80mm - Work light Gsdoztymhjpfx Acijkb - Coolant system - Chip conveyor - Electronic handwheel Dimensions (LxWxH): 2.8x2.2x2.8 meters / Weight: 4400kg Subject to errors and omissions.

Condition: as good as new (ex-display), Taikan T-700B machining center, manufactured in 2026. Gkodpfx Acozzw Husieb

Condition: excellent (used), Year of construction: 2020, Traverses XYZ: 610 x 406 x 406mm, 400mm Diameter table, max table weight 226kg, Gksdpfxjzg Enqj Aciob table tilt +120°, -35°, 22.4kW, 10000rpm, BT40, 30 station tool changer, coolant, swarf conveyor

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 1162068, SPECIFICATION Table size 1370mm x 620mm X axis traverse 1016mm Y axis traverse 660mm Z axis traverse 635mm Spindle nose to table 102 – 737mm Spindle BT40 Spindle speeds 0-12,000rpm Spindle motor 22.4kW Gkodpszr H Tlefx Aciob Rapid feed rate 18m/min Toolchanger capacity 30+ 1 tools Approximate weight 7750Kg MACHINE EQUIPPED WITH: - Haas CNC Control Swarf auger High speed machining Co-ordinate rotation and scaling Rigid tapping 5 off BT40 toolholders Filtermist extraction system Programmable coolant nozzle Lighting Guarding

Condition: used, Year of construction: 2018, Technical details: x-travel: 711 mm y-travel: 406 mm z-travel: 394 mm distance spindle nose and table: 546 - 152 mm table-size: 864 x 381 mm table load: 226 kg turning speeds: 15000 1/min power capacity: 11,2 kW max. torque on the spindle: 62 Nm Gkedpfszxz Hgjx Acijb spindle taper: SK 40 Tool changer: 18+1 rapid travel x/y/z: 61 m/min feed: 30,5 m/min max. tool weight: 5,4 kg max. tool length: 178 mm diameter of tools max.: 64 mm Tool change time tool/tool, milling spindle: 1,75 s internal coolant system feed: 21 bar weight of the machine ca.: 2427 kg dimensions of the machine ca.: 2,8 x 2,4 m Vertical 3-axis machining center POS mill 1100, from year 2009 in good condition. Accessories: - Chip conveyor Knoll - additional coolant filtersystem - Programmable coolan jet - automatic Coolant refillsystem - Airpressure through tool - Measuring probe system WIPS - Synchronized treading - Haas Connect remote control - Media Display - Cooling of electrical cabinet - fixtures and tools will not be sold. *

Condition: ready for operation (used), Year of construction: 2015, travel distance X-axis: 710 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 210 mm, controller manufacturer: SIEMENS, controller model: SIMATIC HMI, overall weight: 670 kg, spindle speed (max.): 20,000 rpm, number of axes: 3, This 3-axis ISEL FLATCOM M 30 was manufactured in 2015. It features a PC control unit with a touchscreen operator panel and an emergency stop button, ensuring user-friendly operation. The machine includes a Ruwac industrial suction system for efficient extraction and a coolant supply specified for ethanol. If you are looking to get high-quality machining capabilities, consider the ISEL FLATCOM M 30 vertical machining centre we have for sale. Contact us for further details. • Control System: PC Control Unit with touchscreen operator panel & Emergency Stop button; secondary SIEMENS SIMATIC HMI Touch panel housed in a Rittal enclosure • Auxiliary / Extraction Equipment: Ruwac industrial suction/vacuum system with flexible hoses attached • Cooling/Lubrication Unit: Coolant/Lubricant supply specified for Ethanol ("Zu verwendender Kühl- + Schmierstoff: Ethanol") • Pneumatics: Integrated Festo pneumatic air preparation assembly with pressure regulator, pressure gauge, and filter units; KITA pressure sensor unit • Internal Enclosure Cooling: Cabinet air conditioning/cooling unit mounted on lower enclosure door • Enclosure Type: Fully enclosed aluminum profile frame with transparent safety glass/polycarbonate sliding doors and warning hazard signage Gjdpfxszu Sa As Aciskb

Condition: ready for operation (used), Year of construction: 2009, operating hours: 12,567 h, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 610 mm, table load: 500 kg, overall weight: 4,500 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 11,000 W, number of slots in tool magazine: 24, number of axes: 5, This 5-axis Hurco VMX 30T was manufactured in 2009. It features an X/Y/Z travel of 762 × 508 × 610 mm and a spindle power of 11 kW, with a maximum load capacity of 500 kg. The machine is equipped with a 24-tool magazine and operates at a spindle speed of 8000 rpm. If you are looking to get high-quality machining capabilities, consider the Hurco VMX 30T vertical machining centre we have for sale. Contact us for further details. • Operating hours: 12,567 h • The machine is equipped with a 30-tool magazine, and it also includes a chip conveyor and tool cooling system. Gkjdpfxsy Naacs Acisb Technical Specification Taper Size SK 40

Condition: like new (used), Year of construction: 2022, operating hours: 930 h, functionality: fully functional, travel distance X-axis: 660 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 360 mm, controller manufacturer: Okuma, controller model: OSP P300MA + 3D kit, workpiece weight (max.): 350 kg, table width: 760 mm, table length: 460 mm, overall weight: 7,000 kg, spindle speed (max.): 20,000 rpm, operating hours of spindle: 930 h, spindle motor power: 15,000 W, spindle nose: HSKA63, number of slots in tool magazine: 20, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, High precision Die/Mold vertical CNC, actively cooled frame & spindle. 0.1um control, 4 digits after the decimal point. Full options, including Renishaw, air on the spindle, laser measurement etc. See attached PDF for a detailed list including software options and accessoires. Cleaned and ready for installation. All checks allowed (at buyers expense, machine stored in warehouse), we can ask Okuma to make a test report if required. New price was 300.000 euro's, so half price for an as-new machine with only 930 hours! Gedpfx Aewzzrksciekb

Condition: good (used), Year of construction: 2013, Traverses XYZ: 762 x 435 x 510mm, table size 920 x 435mm, ISO40 spindle taper, Gkedpfx Aozhwg Uocieb spindle speed 12000 rpm, FANUC i Control, spindle motor power 15kW, 30 station ATC with side arm, Through Spindle Coolant, Low Volt Light, Swarf conveyor

Condition: excellent (used), Year of construction: 2017, Traverses X Y Z: 710 x 450 x 510mm, Table size 760mm x 430mm, spindle speed 8000rpm, spindle motor power 20Hp, Siemens 828D Control with Shopmill, rapid feed XYZ axis 20m/min, Gsdjw U Sf Tepfx Aciskb Spindle taper BT40, 24 station ATC

Condition: used, Year of construction: 2015, Specifications Condition Used Year 2017 Clamping area of the table 500 mm Travel in the x-axis 762 mm Travel in the y-axis 508 mm Travel in the z-axis 508 mm Spindle speed 0 - 12000 rpm Number of driven axes 5 Cooling through the spindle YES Cooling pressure bar Spindle taper 40 Max. workpiece weight 300 kg Tool magazine YES Number of positions in the magazine 40+1 B-axis +35/-110 ° C-axis 360 ° Max. table load 300 kg Max. spindle torque 122 Nm Rapid traverse 22.9 m/min Machine weight 6463 kg Gjdpezxw Itsfx Aciokb Total power input 28 kVA

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, controller manufacturer: FANUC, controller model: Doosan-FANUC 21i-MB, table width: 430 mm, table length: 920 mm, spindle speed (max.): 20,000 rpm, spindle motor power: 15,000 W, number of spindles: 2, number of slots in tool magazine: 30, tool diameter: 40 mm, number of axes: 4, Equipment: documentation/manual, Tool Standard is CAT-40, 30 pieces of Tool-holders are attached to this machine 4th axis: rotary table included; Renishaw probe ready. through spindle coolant; spindle chiller; rigid tapping; rapid traverse 36,000 mm/min; manual pulse generator; air blast; coolant tank & pump; chip tray; Gedpfxjx Ncpge Aciokb

Condition: excellent (used), Year of construction: 2006, Haas TM 2 TRAVELS X 1016MM Y 406 MM Z 406MM Rigid tapping Here at Omega Design we have using Haas machines for 15 years and built our business doing so, we currently run 15 Haas machines. We find the TM2 to be a very capable machine with market leading reliability. Gkedpfx Aeyftdfscieb The machine uses Industry standard BT40 tooling. The Haas control is simple to use and incorporates onscreen toolpath verification, Rigid tapping is also a featured.Circular interpolation,a standard feature,makes lathes almost obsolete for cylindrical profiles. The control interfaces well with CAD-CAM,we will help with setup if required. This machine would make an ideal entry level machine but at the same time is great for quantity production of precision cnc machined parts The machine has been checked by qualified engineers and is ready for work. We use the machine for occasional toolmaking so we can demonstrate if required.

Condition: used, Year of construction: 2021, operating hours: 3,372 h, travel distance X-axis: 730 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 470 mm, workpiece weight (max.): 200 kg, total height: 2,933 mm, total length: 2,984 mm, total width: 2,300 mm, overall weight: 6,780 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 1,114 h, Equipment: documentation/manual, CNC 5-Axis Vertical Machining Centre CNC Control Mazatrol Smooth X Table size Ø 500 mm Table load 200 kg Number of pallets 1x Max. Workpiece 500x320 mm Movement X-axis 730 mm Movement Y-axis 450 mm Movement Z-axis 470 mm C-Axis (table rotation) 360° B-Axis travel ±110 (220) ° Spindle speed 18.000 R/min Spindle Taper HSK A-63 Spindle motor 15/11 kW Gkodszf Hyrspfx Acieb Magazin capacity 48 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: excellent (used), Year of construction: 2006, HAAS VF-2BHE cnc machining center Year: 2006 Technical details: X axis travel 762 mm Y axis travel 406 mm Z axis travel 508 mm Spindle nose BT 40 Spindle speed max 7500 rpm Power 11 kW Tool changer 20 positions Table size 914 x 457mm Maximum weight allowed on table 680 kg Machine weight: 3600 kg Machine dimensions: 2670 x 2600 x 2570 mm Godpfx Aezylhksciekb Accessories/options: Spiral chip conveyor Remote control Prepared for 4.axis ( drive and wiring included ) Coolant tank Under power in our warehouse, possible to test it anytime!

Condition: excellent (used), Year of construction: 2015, operating hours: 3,900 h, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 610 mm, spindle speed (max.): 18,000 rpm, operating hours of spindle: 3,900 h, We offer in very good condition Hurco VMX30 HSi with HSK-A63 spindle and 18k RPM. X-Axis travel: 762mm Y-Axis travel: 508mm Z-Axis travel: 610mm The machine has following options: Internal coolant 20 bar 40 Tool changer 18 k RPM Spindle hSK-A63 Linear Scales Touchprobe Renishaw OMP40 Toolprobe Renishaw TS27R Ultimotion software Tool change optimization software Gjdpfx Aox N E H Uociskb Please not vices are not with sale of machine

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 037611, Equipment: chip conveyor, documentation/manual, Offering a used Wemas Turn 400 in very good condition. Gedpfx Ajzav H Eociokb

Condition: like new (used), Year of construction: 2021, Traverses X Y Z: 710 x 400 x 430mm, Table 800 x 400mm, table load 300kgs, Godpfoyt E Uxox Acijkb Spindle speed 12,000rpm, Spindle taper CAT40, 5.5kW Spindle motor, FANUC Oi , 20 Station ATC, Coolant, Low Volt light, swarf conveyor

Condition: ready for operation (used), Year of construction: 2005, operating hours: 48,246 h, travel distance X-axis: 750 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, total height: 3,000 mm, overall weight: 8,500 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 30,000 W, product length (max.): 4,500 mm, number of axes: 4, This 4-axis AXA DBZ vertical machining centre was manufactured in 2005. It features a travel of 750 mm in the X and Y axes, and 600 mm in the Z axis. The machine includes a robust table size of 1000 x 500 mm, with a maximum table load of 800 kg/m². If you are looking to get high-quality machining capabilities, consider the AXA DBZ vertical machining centre we have for sale. Contact us for further details. Gjdezy Hxdepfx Acijkb - Travel X / Y / Z: 2 x 750 mm (for shuttle mode) / 500 mm / 600 mm- Machine Table: 2 x (1,000 x 500 mm)- Additional Axes: 1x 4th axis- Table Load: max. 800 kg/m²- Tool Taper: SK 40 (DIN 69871 A)- Tool Changer: 22 positions- Max. Tool Length / Diameter: 400 mm / 85 mm (135 mm with free adjacent slots)- Max. Spindle Speed: 10,000 rpm- Spindle Power / Torque: approx. 30 kW / 143 Nm (at 40% duty cycle)- Rapid Traverse (X, Y / Z): 25–26 m/min (X, Y) / 20 m/min (Z)- Supply Voltage: 3x400V/230V/N/PE- Frequency: 50 Hz- Connected Load: 55 kVA- Backup Fuse: max. 100A- Control Voltage: 24V-- Machine Weight: approx. 8,500 kg- Footprint / Dimensions (L x H): approx. 4,500 mm x 3,000 mm- Control on: 127984 hours - Machine on: 119531 hours- Program on: 48246 hours

Condition: ready for operation (used), Year of construction: 2011, operating hours: 83,422 h, travel distance X-axis: 700 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 820 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, total height: 3,600 mm, table width: 630 mm, table load: 850 kg, overall weight: 18,000 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 33,000 W, number of slots in tool magazine: 24, swivel angle A-axis (max.): 150 °, swivel angle C-axis (max.): 360 °, number of axes: 5, This 5-axis KOVOSVIT MAS MCU 630V-5X was manufactured in 2011. It features a HEIDENHAIN iTNC 530 control, a spindle speed of up to 12,000 min⁻¹, and a maximum torque of 157/215 Nm. The machine supports a table load of 850 kg and includes options like cooling through the spindle and a Probe OPM40. Ideal for complex machining tasks, the KOVOSVIT MAS MCU 630V-5X vertical machining centre we have for sale. For more information about this vertical machining centre, please reach out to us. Machine Benefits Qualitative Machine Benefits • Perfect condition • Full documentation available including service history Technical Machine Benefits • Rapid traverse x, y, z: 60 m/min • Acceleration x, y, z: 6. 5 m/s² Gedpfxszv N Iae Aciskb Dimensions Machine Depth 4200 mm Technical Specification Taper Size ISO 40 Through-spindle Coolant Yes

Condition: ready for operation (used), Year of construction: 2001, operating hours: 13,677 h, travel distance X-axis: 750 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 426, total width: 2,650 mm, overall weight: 4,000 kg, spindle speed (max.): 6,000 rpm, number of slots in tool magazine: 20, product length (max.): 3,200 mm, number of axes: 4, This 3-axis WEMAS VZ 750 CENTURY was manufactured in 2001. It features an X-axis travel of 750 mm, Y-axis travel of 500 mm, and Z-axis travel of 500 mm. The machine includes a Heidenhain TNC 426 control unit, an electronic handwheel, and a tool changer. If you are looking to get high-quality machining capabilities, consider the WEMAS VZ 750 CENTURY vertical machining centre we have for sale. Contact us for further details. • Machine ON time: 41,712 hours • Measuring system: Linear position measuring system in all three axes • Handwheel: Heidenhain HR 410 electronic handwheel • Tool changer: Included • Machine access: Side doors with windows (left and right) Additional equipment • Tool probe: m&h Inprocess 3D tool sensor (Type m&h TS35.10) • Workpiece probe: m&h Infrared workpiece touch probe (Type 25.00 SK40-02) • 4th axis: Walter CDS 22 motorized rotary table/indexing head with original control unit • Rotary table features: 3-jaw chuck, RS232 interface, digital angle input Technical Specification Taper Size SK 40 Through-spindle Coolant No Gksdpfjy Ifp Hex Acijb

Condition: good (used), Year of construction: 2007, functionality: fully functional, HAAS VF-2SSHE + MIDACO Pallet System – 2007 CNC Vertical Machining Center with Pallet System For sale: HAAS VF-2SSHE CNC vertical machining center, equipped with a MIDACO pallet system. The machine is installed, in working condition, and available for inspection and testing while powered on, by prior arrangement. Godpfx Acszypt Roijkb Technical data: Manufacturer: HAAS Model: VF-2SSHE Year of manufacture: 2007 Serial number: 1061369 X-axis travel: 762 mm Y-axis travel: 406 mm Z-axis travel: 508 mm Table size: approx. 914 × 356 mm Spindle taper: ISO 40 Automatic tool changer MIDACO pallet system included Power supply: 360–480 V / 3 phase Machine in good working condition Inspection and test run possible while powered on The MIDACO pallet system allows workpiece preparation outside the machining area and can help reduce loading and unloading times, making the machine particularly suitable for series production. Further technical details and the exact machine configuration can be verified during an on-site inspection.