Vertical machining center

HAAS DM2

Condition: used, Vertical machining center, Haas DM-2, year 2017. Hedoy Ia N Ijpfx Ampsl

Condition: ready for operation (used), Year of construction: 2009, operating hours: 9,192 h, travel distance X-axis: 1,200 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 16,000 rpm, number of axes: 3, This 3-axis HERMLE C 1200 vertical machining centre was manufactured in 2009. It features an impressive X-axis travel of 1200 mm, Y-axis travel of 900 mm, and Z-axis travel of 500 mm. The machine is equipped with a spindle speed of 16,000 rpm and includes 30 tool stations. If you are looking to get high-quality machining capabilities, consider the HERMLE C 1200 machine we have for sale. Contact us for further details. • X – 1200 mm • Y – 900 mm • Z – 500 mm • Machining Center C 1200 V • Heidenhain iTNC 530 contouring control • Spindle 16,000 rpm • SK 40 • 30 Tool Stations • Rigid Clamping Table • Coolant System • Electronic thermal compensation (iTNC) with temperature sensors on the motor spindle and machine base • Portal design with a closed rear wall for significantly better support during torsional loads • Two axes are located in the tool, providing very good mass distribution and ideal conditions for high rapid traverse and feed rates • Feed screw diameter and pitch (X and Z axes): 40 / 20 mm • Feed screw diameter and pitch (Y axis): 50 / 20 mm • Direct measuring system Hedpfxsylw Sts Ampol • Resolution: 0.0001 mm • Position tolerance (Tp) in X-Y-Z axes according to VDI/DGQ 3441: 0.010 mm • Recommended ambient temperature for maintaining accuracy: 20 °C ± 1 °C • Flushing/wash-down system for rinsing the side work area • Display: 15" TFT color flat screen • Flexible contour programming • Part program memory • Tool diameter capacity: 80 mm • Tool diameter with free adjacent slots: 125 mm • Maximum tool length: 300 mm • Maximum tool weight: 8 kg • Maximum magazine load: 120 kg • Chip-to-chip tool change time according to VDI 2852: 6.5 seconds • Manual control unit includes electronic handwheel, axis direction keys, feed control, rapid traverse, emergency stop, and enable switch • Machine on – 11,927 h • Spindle on – 9,192 h Additional equipment • Chip conveyor • Heidenhain touch probe • Electronic Manual Control Module (iTNC) Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2016, operating hours: 39,293 h, Movement X-Axis Movement 711 mm Hsdex D Dzwspfx Ampjl Y-Axis Movement 406 mm Z-Axis Movement 394 mm This 3-axis HAAS DM-2 vertical machining center was manufactured in 2016. It features extensive use with 39,293 power-on hours, 11,081 cycle start hours, and 6,377 feed cutting hours. The machine offers a travel range of 711 mm on the X-axis, 406 mm on the Y-axis, and 394 mm on the Z-axis. Consider the opportunity to buy this HAAS DM-2 vertical machining center. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2017, machine/vehicle number: 1140165, functionality: fully functional, Machine from the insolvency of an automotive supplier TECHNICAL DETAILS Control: Haas Spindle mount: CT 40 Hsdpewqcqtofx Ampsl Other auctions from the same location: EBU E 35 Search-ID=19074266 Exner H4SP-200 Search-ID=19074391 HAAS DM-2 Search-ID=19074331 HAAS DT-1 Search-ID=19074411 Hans Schoen SH 200 Search-ID=19074426 Mora Primus 7107 V3 Search-ID=19074526 Rapid DGL 250 Search-ID=19074421 Hans Schoen SH 16 Search-ID=19074441 SW Schwäbische Werkzeugmaschinen BA 312 V3 Search-ID=19074456 SW Schwäbische Werkzeugmaschinen BAS 03-11 Search-ID=19074466 EQUIPMENT - Tool changer - Chip conveyor - Swivel axis Further details according to manufacturer - without guarantee Travels X / Y / Z: 711 x 406 x 394 mm Distance spindle to table: 546 mm Spindle speed: 10,000 rpm Table size: 864 x 381 mm T-slot distance: 125 mm T-slot width: 16 mm T-slot depth: 27 mm Number of slots: 3 Table load: max. 113 kg Tool changer: double gripper Tool diameter: 64 mm Tool length: 178 mm Tool weight: 5.4 kg Tool slots: 18+1 Machine dimensions: approx. 2.8 x 2.2 x 2.6 m Transport dimensions: approx. 2.6 x 2.3 x 2.5 Transport weight: approx. 2.5 t

Condition: used, Year of construction: 2014, INDEX C200 CNC Lathe 3 Turrets 2 spindles Fanuc Control: 31i-Model B Axial Motorized Switches: 6 pcs Radial Motorized Switches: 13 pcs Hodpjxxm Hfofx Ampel Tool Holders: 11 pcs Boring Bar Holders: 21 pcs Pin: 1 pcs Loader Bushings + Sleeves: Ø51/Ø46/Ø41 New MBL loader bushings: 2 sets 2 optical scales overhauled by HEIDENHAIN 1 Balluff Socket Gantry Arms Box with various sensors and proximity switches and cables Motorized Belts: 6 pcs Set of anti-vibration bushings for MBL loaders Start-up time: On time: 37946 Hydraulic hours: 37,500 Production time: 26,500 With MBL Bar Feed

Condition: excellent (used), Year of construction: 2013, Traub TNL 18-7B CNC Automatic Lathe Base machine: 2441 x 1396 mm Weight: 3800 kg Spindle height above floor: 3800 mm Connected power: 24 kW Main spindle Max. bar capacity: 18 mm Max. speed: 12,000 rpm Cross-cut speed: 5,000 rpm Z stroke: 205 mm Rapid traverse: 40 m/min Z measuring system resolution: 0.001 mm Feed force: 3000 N Spindle head / short taper: Traub short taper mount Max. clamping force: 1400 daN Max. clamping pressure: 40 bar Min. clamping pressure: 7.5 bar Piston area: 40 cm2 Total cylinder travel: 5 mm Clamping tube thread: M25 X 1 Counter spindle Workpiece diameter: 21 mm Workpiece clamping depth: 180 mm Max. speed: 12,000 rpm Strokes: X: 120 mm Y: -20/+40 mm Z: 250 mm Rapid traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Max. clamping pressure: 30 bar Min. clamping pressure: 10 bar Top tool turret with B-axis Number of stations: 8 Shank cross-section, turning tool: 16 x 16 mm Stroke: X: 120 mm Y: -25/+40 mm Z: 250 mm Rapid traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Chip-to-chip time: 0.5 sec Measuring system resolution: X: 0.0005 mm Y: 0.0005 mm Z: 0.001 mm Lower tool turret Number of stations: 7 + counter spindle Shaft cross-section, turning tool: 16 x 16 mm Stroke: X: 120 mm Y: -20/+40 mm Z: 250 mm Rapid traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Chip-to-chip time: 0.5 sec Measuring system resolution: X: 0.0005 mm Y: 0.0005 mm Z: 0.001 mm Tool drive for upper tool turret Number of driven stations: Max. 8 Drive power: 2 kW Max. speed: 12,000 rpm Torque: 3.9 Nm Tool drive for lower tool turret Number of driven stations: 7 + counter spindle Drive power: 3.4 kW Max. speed: 12,000 rpm Torque: 7.3 Nm Tool drive for the rear unit Number of stations: 7 Hedpfowg Takjx Ampsl Number of driven stations: max. 3 Pitch spacing: 46 mm Drive power: 2 kW Max. speed: 7,500 rpm Torque: 4.7 Nm Drive power: 2 kW Max. speed: 4,000 rpm Torque: 11.8 SCOPE OF OFFER INCLUDES (list is not exhaustive): Traub CNC lathe Tool holders, driven and non-driven High-pressure and belt filter system Oil mist separator Fire extinguishing system Chip conveyor Bar loader Operational documentation For the exact scope of offer, see the photo gallery No liability is assumed for the accuracy, completeness, or timeliness of the information provided.

Condition: good (used), Machining diameter max: 36 mm Maximum spindle speed: 6300 rpm No. of Spindles: 2 Controller: Traub TX8i Toolchanger 1: No. of tools: 12 positions X-axis travel: 50 mm Z-axis travel: 50 mm Toolchanger fronside: No. of tools: 7 positions Speeds: 150 - 3000 Rpm 300 - 6000 Rpm Max. diameter: 40 mm Hsdpfx Amotrvzxepel X-axis travel: 370 mm Z-axis travel: 250 mm Toolchanger backside: No. of tools: 5 Speeds: 150 - 3000 Rpm 300 - 6000 Rpm Max. diameter: 40 mm X-axis travel: 73 mm Barfeeder: FMB Turbo 5-42 Barlength: 3200 mm Bardiameter: 5 - 42 mm Country of origin: Germany Machine LxWxH: 3400 x 1300 x 1700 mm Machine weight: 4000 kg

Condition: ready for operation (used), Year of construction: 2013, operating hours: 5,446 h, spindle speed (max.): 12,000 rpm, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, spindle motor power: 22,000 W, table load: 300 kg, number of slots in tool magazine: 41, number of axes: 5, This 5s HAAS UMC 750 was manufactured in 2013. It features a spindle speed of 12,000 rpm and a tool capacity of 41 tools, making it suitable for various machining tasks. The machine offers a maximum table load of 300 kg and includes advanced coolant systems for efficient operation. If you are looking to get high-quality machining capabilities, consider the HAAS UMC 750 universal machining center we have for sale. Contact us for further details. • Spindle type: Inline direct drive • Tool holder: SK40 • Tool changer: SMTC Hjdsyid Hvjpfx Ampel • Rotary technology: 2 axes with support bearing • B-axis range: −35° to +110° • C-axis range: 360° • Clamping surface: Ø 630 × 500 mm • Coolant system: standard coolant, P-Cool, through-spindle coolant (TSC) • Renishaw probing: WIPS system with workpiece probe and tool measurement • Control functions: 8M functions, rotate and scale • Memory: 16 MB • HSM: High Speed Milling • Rigid tapping: yes • Cycle time hours: 5,446 h • Power-on hours: 21,246 h Technical Specification Taper Size SK 40

Year of construction: 1996, condition: ready for operation (used), Turning length: 450mm, spindle clearance: 65mm, speed: 4000rpm, main spindle/counter spindle power: 18.5kW/11kW, tool positions: 10, driven tools: 10, hydraulic capacity: 150l, hydraulic pressure: 60bar, connected load: 39kW. Rapid traverse X1/X2: 15m/min, feed force: 5000N, feed path: 140mm. Rapid traverse Z1/Z2: 30m/min, feed force: 8000N, feed path: 450mm. Rapid traverse Y1: 6m/min, feed force: 8000N, feed path: +/-35mm. Machine dimensions X/Y/Z: approx. 4150mm/2000mm/1800mm, weight: approx. 4750kg, control: Traub System TX 8F, operating hours: 78825h. Documentation available. On-site inspection is possible. Hedpsv Scrhsfx Ampel

Condition: ready for operation (used), Year of construction: 2021, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, controller manufacturer: HAAS, spindle speed (max.): 12,000 rpm, spindle motor power: 22,400 W, number of axes: 5, This 5-axis HAAS UMC-750SS vertical machining center was manufactured in 2021. Consider the opportunity to buy this HAAS UMC-750SS vertical machining center. Contact us for more information. Additional equipment • Coolant tank – 208 liters with mobile cart • Programmable coolant pump (M-code controlled) // Programmable Coolant Nozzle (P-COOL) • Safe Run – crash and overload detection system • Control cabinet surge protection • Voltage fault detection module (EPFDM) • Second Home Position button • Remote Jog Handle with 2m cable (RJH-XL) Hjdpfx Amox U Tizepol • Memory lock key-switch • Rotary axis scales • Top cover Machine Benefits Technical Machine Benefits • 30+1 tool side-mount tool changer • Through-Spindle Coolant (TSC): 300 psi (21 bar) high-pressure system. • Wireless intuitive probing system (wips) • Broken tool detection (btd) Extra Information Media display via M130 (images, videos, PDF on screen) Standard machine memory: 1 GB Control Unit 15" color LCD monitor with USB port Touchscreen control interface Ethernet interface HaasConnect remote monitoring HaasDrop wireless file transfer WiFi connectivity Controller High-speed machining (HSM) Rigid tapping Dynamic Work Offsets / Tool Center Point Control (DWO/TCPC) Macro programming, coordinate rotation & scaling Technical Specification Through-spindle Coolant Yes