Used machining centers (vertical) X-axis travel 600-699mm for sale (240)

Condition: ready for operation (used), Year of construction: 2017, operating hours: 2,163 h, travel distance X-axis: 650 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller manufacturer: FANUC, controller model: 0i-MF, table load: 500 kg, spindle speed (max.): 20,000 rpm, spindle motor power: 3,700 W, number of axes: 3, This 3-axis AWEA AF-650 vertical machining center was manufactured in 2017. It features a table size of 750 x 510 mm, can handle a maximum load of 500 kg, and offers axis travels of X = 650 mm, Y = 510 mm, Z = 510 mm. Equipped with a high-speed spindle at 20,000 rpm and a Fanuc 0i-MF CNC control, it's ideal for precise machining tasks. Contact us for more information about this machine. • Table size: 750 x 510 mm • Included accessories: 26 dual-contact bt-fc30 tool holders (with drawbars and nuts) • Included accessories: 5 additional dual-contact bt-fc30 tool holders (with drawbars) Dcodpfx Aqex D I S Tsvop • Machine still under power Additional equipment • chip conveyor • 20 BBT-30 cones with their handles

Condition: excellent (used), Deckel Maho DMC 635V in top condition – few spindle hours (Heidenhain iTNC 530) For sale is a highly precise and excellently maintained Deckel Maho DMC 635V. The machine has very few spindle hours and is in excellent technical and visual condition. Technical data Control: Heidenhain iTNC 530 Travel (X/Y/Z): 635 / 510 / 460 mm Table clamping area: 790 x 560 mm Spindle speed: 20 – 8,000 rpm Feed rate: 0.01 – 10,000 mm/min Rapid traverse: 30 m/min Tool holder: SK40 (DIN 69871) Tool magazine: 20 positions Machine weight: approx. 3,600 kg Equipment & accessories Electronic handwheel Coolant/air blast switchover (M25) Coolant nozzle Machine condition The machine has been technically refurbished by us and is ready for immediate use: The geometry has been completely measured and is verifiably within the manufacturer's tolerance for new machines (geometry protocol included). All hoses have been preventively replaced. The machine has been thoroughly cleaned. An inspection and a detailed test under power are of course possible at our location. Everything from a single source: Baumgärtner CNC GmbH & Co. KG We are a specialist company that focuses on the service, maintenance, overhaul and automation of DMG machines as well as other well-known manufacturers. That is why we will not leave you alone even after the purchase. Dcedez E A Hrepfx Aqvop We will support you! We would also like to offer you the following: Transport and professional installation Installation and commissioning at your location Subsequent maintenance and repair work From machine purchase to ongoing production – you can rely on us. Please contact us for further information or to arrange an inspection appointment.

Condition: not inspected (used), Year of construction: 1999, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, overall weight: 2,700 kg, Fanuc 21IM 4th axis travel distances 600 x 400 x 400 mm tool changer BT40 spindle Dcodps Abl Rlsfx Aqvjp weight 2700 kg

Condition: used, Year of construction: 2008, Palletized Machining Center LEADWELL FMC - 560 CNC FANUC 0i - MC Year of first installation: 2008 Table dimensions: 580 mm x 410 mm Travel: X: 560 mm Dedpfsyft Ikex Aqvscp Y: 420 mm Z: 490 mm Spindle speed: 10,000 rpm Spindle power: 11 kW Tool magazine: 24 positions Chip conveyor Machine weight: 4,500 kg Complete with full documentation

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 650 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 610 mm, total height: 2,260 mm, total width: 2,370 mm, table width: 400 mm, table length: 800 mm, table load: 400 kg, overall weight: 3,700 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 7,500 W, product length (max.): 2,200 mm, number of axes: 3, This 3-axis LAGUN L650 vertical machining centre was manufactured in 2014. It features impressive travels of 650 mm in the X-axis, 510 mm in the Y-axis, and 610 mm in the Z-axis. The machine is equipped with a 16-position automatic tool changer and a powerful 7.5 kW spindle motor. If you are looking to get high-quality machining capabilities, consider the LAGUN L650 machine we have for sale. Contact us for further details. • Automatic cycles: 16-position automatic tool changer • Closure: Fully enclosed protective door with large viewing window • Chip conveyor: Installed on the right-hand side • Condition: Untouched, ready for operation • Control system includes a right-hand mounted operator panel with display, keypad, and control buttons Djdpfxjzk Ix Te Aqvscp • Screen displays coordinates and machining program data • Rear of the machine features ventilation panels and service access doors with safety and warning labels • Machine enclosure is in good condition, with no visible damage or signs of corrosion • Chip conveyor includes a chip collection bin • Chip conveyor and collection bin are clean and in good condition • Filtermist S800 oil mist extraction system mounted on top of the enclosure • Three-color stack light installed on top of the machine • Internal hydraulic and lubrication systems are clean and show minor signs of use • No visible leaks or corrosion were observed

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 640, total height: 2,700 mm, overall weight: 9,600 kg, spindle speed (max.): 20,000 rpm, product length (max.): 3,000 mm, number of axes: 5, This 5-axis DMG MORI DMU 60 EVO was manufactured in 2017. It features a Heidenhain iTNC 640 control, a spindle speed of 20000 rpm, and a 120-fold tool changer. The machine includes a chip conveyor, coolant system, and an internal coolant supply of 40bar. It's well-suited for high-precision machining tasks. Consider the opportunity to buy this DMG MORI DMU 60 EVO vertical machining centre. Contact us for more information about this machine. • NC swivel rotary table • Tool changer: Yes, chain magazine 120 positions (120-fold) Dodpsy D Hvasfx Aqvscp • Coolant: internal/external; internal coolant supply 40 bar / 6001; extended chip flushing; flushing gun; blast air through spindle center • Rotating viewing window • Electronic handwheel • Screen display: German/English • Space requirement: 25 sqm • Condition: Very good, in operation Additional equipment • Chip conveyor • Oil and emulsion mist separator • Infrared PP 60 optical measuring probe • Tool breakage control TRS2 • Signal light, 4-color • Extended interface M65 for Erowa Job Management System • Preparation for EROWA handling system (Operating mode 4) • Accessories: 120x SK40 tool holders Technical Specification Taper Size SK 40

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : BBT 30 (Big-Plus) - Spindle power : 12 [kW] Dcedpjx Tvizsfx Aqvop - Spindle speeds : 10000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 700/400/330 [mm] - Rapid traverses rates (X/Y/Z) : 54 [m/min] - Cutting feed rates (X/Y/Z) : 1-30000 [mm/min] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 21 TABLE - Table dimensions : 850 x 410 [mm] - Maximum weight upon table : 300 [kg] - Distance table / spindle nose (min./max.) : 250-580 [mm] POWER SUPPLY - Supply voltage : 380 [V] WEIGHT & DIMENSIONS - Machine floor space : 2165 X 2087 [mm] - Machine height : 2345 [mm] - Machine weight : 2000 [kg] MACHINE HOURS - Number of working hours : 3207 [h] EQUIPMENT - CNC : Fanuc 31i model B5 - 3 colors status lamp DIVIDING UNIT * manufacturer : Häberle * model : DTTiB * travel 4th axis : 360 [°] * indexing precision 4th axis : 0.001 [°] * travel 5th axis : -7/+100 [°] * indexing precision 5th axis : 0.001 [°] * tightening type : Pneumatique - Coolant tank * with high-pressure pump : 15 [bars] - Coolant through spindle - Chips conveyor : ARRIERE - Tool probe : Renishaw - Workpiece probe : Renishaw - Electric transformer - Milling vice - Tool-holders

Condition: used, Year of construction: 2013, operating hours: 12,000 h, Hurco VMX42i WinMax control Table clamping surface 1270 x 610 mm Table load 1750 kg Dcsdpfx Aori N A Heqvjp Travel X axis 1067 mm y-axis 610 mm z axis 610 mm Tool holder SK 40 Spindle speed max rpm 12000 Spindle power max 18 KW Tool changer 30 times Tool diameter max 80/76 Tool length 300 mm Machine weight 6850 kg Coolant tank 484 liter

Condition: used, Year of construction: 2011, Technical details: x-travel: 660 mm y-travel: 355 mm z-travel: 500 mm total power requirement: 19 kW Djdpezq S D Tefx Aqvscp weight of the machine ca.: 4,1 t

Condition: ready for operation (used), Year of construction: 2001, travel distance X-axis: 650 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 460 mm, controller manufacturer: FANUC, controller model: 16i-MB, total height: 3,153 mm, total width: 1,600 mm, overall weight: 7,700 kg, spindle speed (max.): 1,200 rpm, number of slots in tool magazine: 20, product length (max.): 3,200 mm, number of axes: 3, This 3-axis Enshu ES450 was manufactured in 2001. It features an X-axis travel of 650 mm, Y-axis travel of 450 mm, and Z-axis travel of 460 mm. The machine is equipped with a Fanuc 16i-MB control unit and has a tool magazine capacity of 20 tools. If you are looking to get high-quality milling capabilities, consider the Enshu ES450 vertical machining centre we have for sale. Contact us for further details. • Coolant pressure: 6 bar / 60 bar • Hydraulic pressure: 100 bar • Electricity consumption: 22 kWh • Compressed air consumption: 43.68 m³/h • Documentation: Electrical manual: No; Mechanical manual: Yes • Units available: 4 • Unit 1: Year 2001; Operating hours 49,900 h; References 169 / MF-960004 • Unit 2: Year 2001; Operating hours 56,000 h; References 170 / MF-960005 • Unit 3: Year to be confirmed; Operating hours to be confirmed; References 176 / MF-960006 • Unit 4: Year 2001; Operating hours 48,100 h; References 175 / MF-960007 Additional equipment • Chip conveyor: Included • Conveyor dimensions (L × W × H): 5,500 × 1,600 × 1,600 mm • Conveyor weight: approx. 2,500 kg Technical Specification Taper Size BT 40 Dedpfx Aqsz Hm Iiovecp

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 530 i, rotational speed (max.): 10,000 rpm, number of slots in tool magazine: 24, MIKRON VCE600PRO machining center with 3+2 axes (on table) X travel 600 Y 450 Z 540 mm, SK40 with 10,000 rpm and ATC 24 tools. Excellent condition. Dcjdpsqi Ufxefx Aqvjp

Condition: excellent (used), Year of construction: 2000, Controll HeidenHain 3D 430 Spindle Taper SK 40 Power on spindle13 kW CNC Automatic milling head / Gr.-91 to + 12 Grad X – Travel 630 mm Y – Travel 560 mm Z – Travel 560 mm Table Length x Width 1000 x 600 mm Table load 500 Kg Number off controlled axis 4 Dedpfxegqbp Uj Aqvscp ATC tool changer 20 Spindle speeds / ranges 18000 Rpm

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 600 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, table width: 600 mm, table length: 900 mm, table load: 500 kg, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 30, number of axes: 3, This 3-axis MORI SEIKI DURA VERTICAL 5060 was manufactured in 2007. It features a travel distance of 600 mm in the X-axis, 530 mm in the Y-axis, and 510 mm in the Z-axis. The machine includes a table size of 900 x 600 mm and a maximum table load of 500 kg. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI DURA VERTICAL 5060 vertical machining centre we have for sale. Contact us for further details. Dcjdpfezwvkkox Aqvsp • Travel X: 600 mm • Travel Y: 530 mm • Travel Z: 510 mm • Table Length: 900 mm • Table Width: 600 mm • Table Load: 500 kg • Spindle Speed: 10,000 rpm • Spindle Taper Options: SK40 / BT40 • Tool Positions: 30 Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2002, operating hours: 13,028 h, travel distance X-axis: 640 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, total height: 2,450 mm, table width: 2,400 mm, overall weight: 6,500 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, product length (max.): 3,000 mm, number of axes: 3, This 3-axis DMG DECKEL MAHO 64V Linear was manufactured in 2002. It features an X-axis travel of 640 mm, Y-axis travel of 600 mm, and Z-axis travel of 500 mm. The machine includes a table clamping surface of 850 × 600 mm and a maximum table load of 600 kg. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO 64V Linear vertical machining centre we have for sale. Contact us for further details. • Rapid Traverse (X / Y / Z): 30 m/min • Max. Feed Rate: 20000 mm/min • Table Clamping Surface: 850 × 600 mm • Max. Table Load: 600 kg Dcodpfjy S Azhjx Aqvsp • Automatic Tool Changer (ATC) Magazine Capacity: 30 stations • Max. Tool Diameter: 80 mm (140 mm with adjacent pockets empty) • Max. Tool Length: 300 mm • Max. Tool Weight: 7 kg • Spindle Speed Range: 20 – 8000 rpm • Tool Taper: SK 40 / ISO 40 • Spindle Power (100% / 40% ED): 13 kW / 19 kW • Max. Spindle Torque: 140 Nm Technical Specification Taper Size SK 40

Condition: used, Year of construction: 2012, CNC machining center Manufacturer: Unverzagt Type: UVA 550 Plus Year of manufacture: 2012 Control system: Siemens 828D Operating hours: approx. 3,000 Travel ranges: X/Y/Z: 600 x 400 x 500 mm Tool positions: 20 Tool holder: SK40 Spindle speed range: 10,000 rpm Hexagon function keys Chip conveyor Dcjdpfx Ajwv Tm Noqvjp Spindle cooler IKZ (internal cooling system) 31126ä

Condition: used, Year of construction: 2007, B-axis swival range +/- -90° / +12 ° C-axis 360 ° control HEIDENHAIN - Millplus number of spindle speeds 12.000 U/min numbers of positions in the tool changer 60 tool taper SK40 NC rotary table diameter 600 mm Dcjdpfxjy A Tbyo Aqvsp fixed clamping table 1.000 x 600 mm max. table load 500 kg 5-axis simultaneous machining center | DMG - DMU 60 monoBlock equipped with ITC (40bar), a 60-way tool changer, NC - rotary table, Renishaw measuring probe and chip conveyor. Additional equipment information: - NC swivelling head B-axis - NC rotary table C-axis integrated in the fixed table - Direct position measuring system in X/Y/Z (glass scales) - Extraction system - 3D Quickset - Handwheel HR 410 The machine is in a well-maintained condition and can be inspected at any time under power. The machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DMU60monoBlock | DMU60 monoBlock | DMU60 | 60 monoBlock

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 610 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, controller manufacturer: FANUC, controller model: Series 0i-MD, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis UNITECH XV 610 was manufactured in 2011. It features a spindle speed of 10,000 rpm and an automatic double-arm tool changer with a capacity of 24 stations. The machine includes a chip conveyor and has a total weight of 3,300 kg. If you are looking to get high-quality machining capabilities, consider the UNITECH XV 610 vertical machining centre we have for sale. Contact us for further details. Djdpfx Aqj Ahq T Iovjcp - Spindle Taper: SK40 - Tool Changer Capacity: 24 stations - Tool Changer Type: Automatic double-arm tool changer - Chip Conveyor: Included - Voltage: 230 V - Frequency: 50 Hz - Connected Load: 30 kVA - Total Weight: 3,300 kg - Exclusions: Clamping devices (vises) and tool holders are NOT included in the price

Condition: ready for operation (used), Year of construction: 2016, operating hours: 152 h, functionality: fully functional, machine/vehicle number: 665182, travel distance X-axis: 650 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 42,000 rpm, number of slots in tool magazine: 40, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item within the period from September 21st to October 1st! Spindle replacement for €40,000 in 2025! Since then, only approximately 150 spindle operating hours! TECHNICAL DETAILS Travel range X-axis: 650 mm Travel range Y-axis: 550 mm Travel range Z-axis: 500 mm Feed rates Feed rate X-axis: 30 m/min Feed rate Y-axis: 30 m/min Feed rate Z-axis: 30 m/min Spindle Spindle mounting: HSK-E 40 Spindle speed: 42,000 rpm Spindle operating time: 151 h 20 min 08 s Spindle replacement: 2025 Cost of spindle replacement: approx. €40,000 Tool magazine Number of tool positions: 40 Pallet system Pallet dimensions: approx. 320 × 320 mm Pallet clamping: Rotary table MACHINE DETAILS Mains voltage: 400 V Mains frequency: 50 Hz Control voltage: 24 V DC Maximum fuse rating: 63 A Connected power: 38 kVA Dimensions and weight Overall height: 2,850 mm Overall length: 3,300 mm Dedoz Aplxopfx Aqvocp Overall width: 2,400 mm Machine weight: 9,000 kg EQUIPMENT - Technical documentation - Manual - HSK-E 40 tool holders - 3 pallets External reference: Demo - Lot 5

Condition: excellent (used), Year of construction: 2001, functionality: limited functionality, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 510 mm, input voltage: 400 V, Equipment: documentation/manual, kONDIA B 640 4-axis machining center Dcodszp Hfvepfx Aqvsp Table: 800 x 400 X-axis travel: 600 mm Y-axis travel: 400 mm Z-axis travel: 510 mm Spindle speed: 6000 rpm 4th axis: SPIRSIN, 170 Ø Control: FAGOR 8055 Tool capacity: 22 Tool holder: ISO 40 Electronic handwheel Through-tool coolant Machine dimensions (width x length x height): 1950 x 2123 x 2875 Weight: 3600 kg

Condition: used, Year of construction: 2008, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 300 mm, table width: 550 mm, table length: 700 mm, spindle speed (max.): 42,000 rpm, spindle nose: HSK 40, number of slots in tool magazine: 20, Vertical Machining Center Manufacturer: RÖDERS Model: RFM 600 DS Year of manufacture: 2008 Control system: Röders RFM 600 DS Technical data: - X-travel: 600 mm - Y-travel: 450 mm - Z-travel: 300 mm - Spindle speed: 42,000 rpm - Table size: 700 x 550 mm - Tool holder: HSK 40 - Number of tool positions: 20 Equipment: - Extraction system (Keller) - Pallet system (Röders RC 2) Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Djdpfx Aqsx Iwg Dovecp Subject to technical changes, errors, and prior sale.

Condition: ready for operation (used), Year of construction: 1998, operating hours: 23,800 h, travel distance X-axis: 600 mm, travel distance Y-axis: 525 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 426, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 25, number of axes: 3, This 3-axis DECKEL MAHO DMU 60 E was manufactured in 1998. It features an X-axis travel of 600 mm, Y-axis travel of 525 mm, and Z-axis travel of 500 mm. The machine is equipped with a 25-fold tool changer and a manually swivelable milling head, providing versatility for various machining tasks. If you are looking to get high-quality milling capabilities, consider the DECKEL MAHO DMU 60 E vertical machining centre we have for sale. Contact us for further details. • Milling Head: Manually swivelable • Tool Changer: 25-fold • Tool Holder: SK 40 Dedpfxe Aazq Es Aqvscp • Spindle Speed: Up to 12,000 rpm • Operating Hours: Approx. 44,600 hrs. • Spindle Hours: Approx. 23,800 hrs. • Optional Equipment: Chip tray, manual touch probe, coolant unit Technical Specification Taper Size SK 40

Condition: used, Year of construction: 2005, - Fagor 8055 CNC control - Additional tank for internal spindle cooling (15 bar) 400 liters - Year of construction 2005 Dcjdpotvf Htsfx Aqvjp Technical data: - Travel X/Y/Z: 610 / 455 / 520 mm - Rapid traverse: 24 m/min - Working spindle speed: 8000 rpm - Tool holder: BT40 - Table size: 762 x 363 mm - Maximum table load: 350 kg - Motor power: 18 kW - Operating voltage: 400 V - Weight: 3140 kg

Condition: good (used), Year of construction: 2007, operating hours: 32,000 h, functionality: fully functional, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, Machine is being sold on behalf of the customer and can be inspected under power. Machine location: Czech Republic (Brno) Manufacturer: Deckel Maho Model: DMC 635V Year: 2007 Approx. 32,000 operating hours Dcsdpfxeylmdfs Aqvep Control: Heidenhain iTNC 530 Spindle mounting: SK40 Speed: 10,000 rpm Travel (X/Y/Z): 635 / 510 / 460 mm Clamping surface (table): 790 x 560 mm 30-position tool changer + Blum laser tool measurement + Paper band filter / ICS 20 bar / 600 l + Chip conveyor Dimensions (approx.) LxWxH 260 x 390 x 240 cm Installation area 530 x 590 cm Weight: approx. 4,200 kg

Condition: good (used), Year of construction: 2009, 1 used vertical machining center Manufacturer: Mikron Type: HPM 600 HD Year of manufacture: 2009 Control system: Heidenhain ITNC 530 Technical data: Travel ranges: X 650 mm Y 600 mm Z 500 mm Dcodjzamngepfx Aqvsp Spindle mount: HSK 63 Max. spindle speed: 2000 rpm Table size: 800 x 600 mm Number of tool positions: 30 Equipped with: Laser measurement system Measuring probe Operating mode: 3+4 axes ITC Intelligent Thermal Control Automatic central lubrication Mobile handwheel Tool air blow-off device Weight: 11 tons

Condition: good (used), Year of construction: 2006, Parts shown by hand not come. Dedjzyakmspfx Aqvscp