Used machining centers (vertical) X-axis travel 600-699mm for sale (240)

Condition: good (used), Year of construction: 2008, operating hours: 32,180 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 540 mm, travel distance Z-axis: 540 mm, total height: 2,650 mm, total length: 2,350 mm, total width: 2,250 mm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 10,080 h, number of slots in tool magazine: 20, Equipment: documentation/manual, Bridgeport GX600 Year of manufacture: 2008 Coolant collection tank HDH530 control system Dodpfxsz Eh Izs Aqvjcp SK40 tool holders 20-position tool changer Coolant spray gun The machine has been serviced annually. It was used to machine almost exclusively aluminum (99%). The spindle was completely overhauled one year ago. The M&h tool measurement sensor is also approximately one year old.

Condition: ready for operation (used), Year of construction: 2024, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 330 mm, table load: 250 kg, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 21, tool weight: 2,000 g, number of axes: 3, This 3-axis HAAS DC-1 was manufactured in 2024. It features an X-axis travel of 600 mm, Y-axis travel of 450 mm, and Z-axis travel of 330 mm. The machine includes a robust table size of 700 x 420 mm and a maximum table load of 250 kg. If you are looking to get high-quality machining capabilities, consider the HAAS DC-1 vertical machining centre we have for sale. Contact us for further details. Dcsdpfjz Nytfsx Aqvop • Working hours: 0 (showroom machine) • Spindle nose to table: max 18.9 in / 480 mm; min 5.9 in / 150 mm • Spindle: max torque 14.0 ft-lbf @ 2500 rpm / 19.0 Nm @ 2500 rpm; inline direct-drive; taper BT30; grease-packed bearings; liquid-cooled • Table: 27.6 in / 700 mm (L) x 16.5 in / 420 mm (W); T-slot width 0.550 in / 14 mm; T-slot center distance 4.92 in / 125 mm; 3 T-slots; max load 550 lb / 250 kg (evenly distributed) • Feedrates: max cutting 1200 ipm / 30.5 m/min; rapid (X/Y/Z) 1890 ipm / 48.0 m/min • Max thrust (X/Y/Z): 2054 lbf / 9137 N • Tool changer: turret; capacity 21; max tool dia (full) 2.4 in / 60 mm; max tool dia (adjacent empty) 3.1 in / 80 mm; max tool length 7.90 in / 200 mm; tool-to-tool 1.50 s; chip-to-chip 2.50 s • Max tapping speed: 5000 rpm • Coolant capacity: 40 gal / 151 L • Air: 4 scfm @ 100 psi / 113.0 L/min @ 6.9 bar; inline air hose 3/8 in; air coupler 3/8 in; min pressure 80 psi / 5.5 bar • Power: 3-phase 220 VAC (FLA 40 A) or 440 VAC (FLA 20 A) • Shipping: 100.0 in x 79.0 in x 100.0 in / 254 cm x 201 cm x 254 cm; weight 7040 lb / 3402.0 kg Additional equipment • CW-5200 industrial chiller • Chip conveyor Technical Specification Taper Size BT 30

Condition: used, Year of construction: 2006, Equipment: documentation/manual, Control Fanuc 0M Two palletes Table dimensions – 650x420 mm Axes: X 580mm, Y 420 mm, Z 490 mm Spindle 12 000 rpm, SK40 Dodpozxxv Ejfx Aqvecp Machine dimensions 2500 x 2100 x 2500 mm Machine weight 3900 kg

Condition: good (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 665182, travel distance X-axis: 650 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, total height: 2,850 mm, total length: 3,300 mm, total width: 2,400 mm, overall weight: 9,000 kg, spindle speed (max.): 42,000 rpm, number of slots in tool magazine: 40, Equipment: documentation/manual, OPS INGERSOLL SPEED HAWK 650 CNC machining center - Important note: the spindle was replaced in 2025 for approximately EUR 40,000, resulting in very few spindle operating hours! - Pallet dimensions: approximately 320 x 320 mm - The pallets are clamped onto the rotary table - Tool holder: HSK-E 40 - For further technical data, see the images - With technical documentation - With HSK-E 40 tool holders and three pallets Attention: The item must be picked up between July 21st and July 23rd, 2026, on a date to be confirmed. Dcodpfx Aqey Tvcusvep FCA D-73529 Schwäbisch Gmünd - loaded onto a truck

Condition: used, Year of construction: 2015, Technical details: x-travel: 600 mm y-travel: 400 mm z-travel: 500 mm control: Mitsubishi M70 table-size: 2 × 700 × 400 mm mm table load capacity: 2 × 250 kg kg tool taper: SK40 / ISO40 Revolution per minute: 12.000 U/min. tool changer with: 24 Plätze (+1 Werkzeugwechselposition) drive power: 7,5 kW total power requirement: 25 kW Weight approx.: 6,6 t dimension machine approx.LxWxH: 3,7 × 2,60 × 2,78 m Dsdjzzyg Depfx Aqvscp The Müga S6040 is a modern vertical CNC machining center designed for the precise complete machining of workpieces in single-part, small-batch, and series production. The machine is equipped with a high-performance main spindle with speeds of up to 12,000 rpm, a Mitsubishi M70 CNC control system, and an integrated twin pallet changer (worktable changer) for highly efficient and productive machining. Its rigid machine structure and precision linear guideways make the Müga S6040 ideally suited for demanding milling, drilling, tapping, and machining operations in toolmaking, mechanical engineering, mold making, and general metalworking. 4-axis CNC machining center with pallet changing system – 2 workstations (A/B), each equipped with its own CNC-controlled 4th axis and chuck. A particular advantage of this machine is its swivel table: Equipped with a swivel table, the S6040 allows workpieces to be loaded and unloaded while machining is in progress. This significantly increases the machine's productivity. The swivel time is only 3.0 seconds. *

Condition: used, Year of construction: 2016, functionality: fully functional, travel distance X-axis: 660 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, controller manufacturer: Hurco, controller model: WinMax, workpiece weight (max.): 681 kg, total height: 2,519 mm, total length: 1,800 mm, total width: 1,671 mm, table width: 406 mm, table length: 762 mm, table load: 681 kg, overall weight: 2,818 kg, spindle speed (max.): 10,000 rpm, distance table to spindle center: 101 mm, distance table center to spindle nose: 610 mm, spindle motor power: 11 W, spindle nose: ISO40, number of spindles: 1, number of slots in tool magazine: 20, tool length: 25 mm, tool diameter: 89 mm, tool weight: 7 g, Equipment: chip conveyor, documentation/manual, Used Hurco VM10i vertical machining center, ideal for companies seeking precision, reliability, and productivity with a reasonable investment. This machine is perfect for mechanical workshops, subcontractors, and manufacturers of components for automation, automotive, hydraulics, and general mechanical applications. It features a robust structure, high precision, and excellent performance in milling, drilling, and tapping operations. The machine is in good working condition and ready for immediate integration into production. Available for inspection and testing at our facility. The machine is complete with: * Auger-type chip conveyor with side discharge * High-pressure pump Dcsdpfx Ajzcpu Ieqvjp * Digital manuals * CE declaration of conformity

Condition: good (used), Year of construction: 2013, Travel ranges (working area) Djdjz Nktvepfx Aqvscp X-axis: 660 mm Y-axis: 406 mm Z-axis: 508 mm Spindle nose to table: approx. 102 to 610 mm Coolant system Feed rate / rapid traverse (X / Y / Z): 28 / 28 / 28 m/min Tool changer: Magazine for up to 24 tools (SK40) Max. tool weight: 7 kg

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, Vertical machining center Manufacturer: DMG Gildemeister Type: DMC 635 v eco Machine No.: 1537000170A Year of manufacture: 2009 Control system: Siemens 810D Shopmill Axes: 3 Travel ranges X: 635 mm Y: 510 mm Z: 460 mm Tool changer: 20 positions, SK 40 Spindle speed: 20-8,000 rpm Drive power: 13/9 kW (40/100% ED) - Direct path measuring system for X, Y, and Z axes - Compressed air for measuring systems - Coolant/air switchover - Table size 560x790 mm - Electronic handwheel Dodpfx Ajz I Rnvsqvjcp Errors and prior sale excepted.

Condition: excellent (used), Year of construction: 2014, CNC MACHINING CENTER ROMI D 600 Year of manufacture: 2014 CONTROL: FANUC oi-MD Technical data: Drive power: 15 kW Travel ranges: X 600 mm, Y 530 mm, Z 580 mm Table surface: 840 × 500 mm Dodpfx Aqjz Hl Dcsvocp Permissible table weight: 800 kg Spindle speed: 8000 RPM 20-tool changer, 80 tool holders BT 40

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 107.32.99.077, travel distance X-axis: 530 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, rapid traverse X-axis: 22 m/min, rapid traverse Y-axis: 22 m/min, rapid traverse Z-axis: 22 m/min, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Dcodpfoxrc Sqex Aqvop Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: used, Year of construction: 2007, travel -x axis 650 mm travel -y axis 600 mm travel -z axis 500 mm control HEIDENHAIN - iTNC 530 number of spindle speeds 10.000 U/min NC rotary indexing table Ø 630 mm numbers of positions in the tool changer 32 tool taper SK 40 5-axis simultaneous machining center | HERMLE - C 30 U equipped with ITC (80 bar), NC swivel rotary table, tool changer & chip conveyor. The Z-axis motor was replaced in 2025, and the spindle was already replaced in 2015 at 7,100 operating hours. The machine is in a well-maintained condition. Dodpfxjzaf Huj Aqvecp Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: C30U | C-30U | C-30 U | C40U | C-40U | C-40 U

Condition: excellent (used), Year of construction: 2022, operating hours: 8,703 h, functionality: fully functional, machine/vehicle number: G2713-0032, overall weight: 6,800 kg, Hello. I have a 5-axis CNC milling center, a HYUNDAI KF3500/5A, for sale. The machine is connected and operational. It is in perfect technical condition!!! Low operating hours!!! Only 8703 hours. I have owned the machine since it was new!!! I am the first owner!!! _ Type: 5-axis Milling Center Manufacturer: HYUNDAI Wia Model: KF3500/5A _ 5-Axis Control: HYUNDAI WIA FANUC i Series _ SMART Plus Country of origin: South Korea Year of manufacture: 2022 _ Machine parameters: Dcodpfxs Adqlto Aqvsp – Number of axes: 5 – Work table dimensions (length x width): Fi-400 x 335 mm _ 250kg – Maximum spindle speed: 15,000 [rpm] – Tool magazine: 30 pcs. BT40 – Tool measurement probe – Workpiece measurement probe – Spindle power: 18.5/11 [kW] – Axis travel (X/Y/Z) mm: 600/655/500 – A-axis travel = 150° – C-axis travel = full 360° – Rapid traverse speed (X/Y/Z) [m/min]: 36/36/30 – Total power: 25 kVa – Total weight: 6800 kg – Chip conveyor – Oil mist separator

Condition: good (used), Year of construction: 2018, functionality: fully functional, Siemens 828 chop-mill Dcodpfxsy S Ubtj Aqvep Palett 650x400 mm X/Y/Z 560/360/480 mm 24.000 v/min, BT 30 Big plus ATC 20 pos.

Condition: good (used), Year of construction: 2013, Vertical machining center Machine type: DMG DMC 635 V / P Control: Heidenhain iTNC 530 Year: 2013 SPECIFICATIONS Travel X-Axis: 635 mm Y-Axis: 510 mm Z-Axis: 460 mm Spindle speeds: 10.000 rpm Tool: SK 40 Toolchanger Tool capacity: 30 Dsdez Dkt Dspfx Aqvscp Palett system Amount of paletts: 2 Table size: 560 x 790 mm Equipment No cooling through spindle Electronical handwheel Caliper: TS649 Tool measurement: Tischtaster Chip rinsing pistol

Condition: ready for operation (used), Year of construction: 2019, operating hours: 2,975 h, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 640, total height: 2,720 mm, overall weight: 4,350 kg, This 3-axis AXILE V4 vertical machining center was manufactured in 2019. It features a robust table size of 770 × 410 mm with a maximum load capacity of 400 kg. Equipped with a high-speed ISO40 spindle capable of 12,000 rpm, it ensures efficient machining. The machine includes a 30/32 tool arm changer and a rapid traverse rate of 36 m/min, enhancing productivity. Consider the opportunity to buy this AXILE V4 vertical machining center. Contact us for more information. Additional equipment Dcodpfx Aqsx D Iydovep • T-slots: 16 × 100 mm (4 pieces) • Speed: Standard: 12000 rpm /Optional: 18000 rpm or 24000 rpm • Motor power: Heidenhain: 10/12.5 kW /Siemens: 10.5/15.8 kW /Fanuc: 11/15 kW/ Optional: 20 kW • Axial Accuracy Control (AAC) / Spindle Vibration Supervision (SVS) / Tool-tip Positioning Control (TPC) • Standard: 30 or 32 tools/ Optional: 40 tools • Tool holder: BT / CAT / DIN 40 / HSK 63 /Change time (tool-to-tool): 1.55 s (50 Hz) / 1.31 s (60 Hz) • Max. Tool dimensions: Diameter: Ø75 mm (Ø125 mm with empty neighboring compartment) / Length: 300 mm /Weight: 7 kg • Tool changer (ATC) Type: Arm change • ISO40 in-line spindle (12000 rpm, with CTS function) / Spindle oil cooler / Arm tool changer (30/32 tools) • Coolant tank (20 bar) / Scraper chip conveyor / Linear encoder for all 3 axes / Backwash device / Flushing gun / Heat exchanger / 4th axis prepared (switching circuit) Machine Benefits Technical Machine Benefits • Table: size: 770 × 410 mm / height: 820 mm / max. Load: 400 kg • Accuracy: repeat accuracy (x/y/z): ±0. 01 mm / positioning accuracy: 0. 01 mm over 300 mm / feed speed (rapid traverse): 36 m/min (x/y/z) • Guide rails: linear guideways (35 mm ball) x: 300 mm distance/ y: 620 mm /distance z: 400 mm/ distance • Axis drive: recirculating ball screws: Ø32 × p12 × c3 (for x, y, z) • Max. Load weight: 160 kg (standard) / 200 kg (optional) • Floor area: 3195 × 1910 mm • Spindle center to z-axis guard: 475 mm/spindle nose to table: 100-550 mm Dimensions Machine Depth 3195 mm

Condition: ready for operation (used), Year of construction: 2015, operating hours: 27,157 h, travel distance X-axis: 670 mm, travel distance Y-axis: 830 mm, travel distance Z-axis: 600 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, table load: 1,200 kg, overall weight: 20,000 kg, spindle speed (max.): 18,000 rpm, number of axes: 5, This 5-axis POSmill H 800 U was manufactured in 2015. It features a maximum spindle speed of 18,000 rpm and a table size of Ø 800 mm, with a maximum table load of 1,200 kg. The machine includes a 96-fold tool changer and advanced Heidenhain control unit. If you are looking to get high-quality machining capabilities, consider the POSmill H 800 U vertical machining centre we have for sale. Contact us for further details. - Swivel Range: -120 to +120 degrees- Rotary Table: 360 degrees continuous- Spindle: Coolant Through Spindle (CTS / IKZ) 70 bar with belt filter unit- Table Size: Ø 800 mm (Kessler Table)- Tool Changer: 96-fold HSK-A 63- Linear Measuring System: Heidenhain XYZ with purge air- Switch Cabinet Cooler: Active Air-Air- Connected Load: 90 kVA- Full Load Current: 125 A- Max Current Load: 200 A- Voltage: 400 V, 50 Hz- Operating Hours Control On: 27,157 h (as of end 2025)- Operating Hours Program Run: 21,340 h (as of end 2025)- Additional Equipment: - Oil cooling for 4th and 5th axis, controlled - Regulated spindle cooler - Heidenhain Rotary Measuring System - Heidenhain Kinematics Module incl. Reference Sphere - External hinged belt chip conveyor - Coolant pump at head via M-functions - Chip flush device pump - Electromechanical oil/coolant separator - Automatic coolant level monitoring - Tool changer rear operation with display - Tool changer protective door - 3-fold hydraulic connection in table center - 1-fold air connection in table center - Coolant unit temperature control - Workpiece measurement preparation - Infrared workpiece measurement - 3D Touch Probe - Tool measurement via BLUM laser (Laser bridge) - Heidenhain DCM collision module- Automation System: FCS RP 400 Pallet Automation (Commissioned Early Sept 2018)- Pallet Positions: 12- Pallet Size: 400 x 400 mm- Max Transfer Weight: 500 kg Dcsdjz Ixtmspfx Aqvop Technical Specification Taper Size HSK 63

Condition: used, operating hours: 3,000 h, CNC CONTROL Controller: Fanuc 32i X-axis travel mm: 635 Y-axis travel mm: 510 Z-axis travel mm: 460 Distance spindle nose - table surface mm: 120 - 580 Table dimensions mm: 790 x 560 Dedpjzxivvofx Aqvjcp Max. table load kg: 600 Max. spindle speed rpm: 8.000 Spindle taper / interface: SK 40 Tool holder / taper: SK 40 Tool magazine capacity: 20 Under power hours: 6.313 Spindle working hours: 2.999

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 540 mm, travel distance Z-axis: 540 mm, Manufacturer: Bridgeport / Hardinge Model: GX 600 Year of construction: 2008 Control system: Siemens 810D Machine type: CNC vertical machining center Axes: 3 (X, Y, Z) Travel distances: X-axis: 600 mm Y-axis: 540 mm Dcjdoz Rz Igjpfx Aqvjp Z-axis: 540 mm Distance from spindle nose to table: 145–685 mm Work table: Table dimensions: 750 × 540 mm Max. table load: 700 kg T-slots: 3 × 18 mm Main spindle: Spindle speed: 8,000 rpm Spindle power: approx. 15 kW Tool holder: SK40 Tool changer: Tool magazine: 20 positions Max. tool diameter: 94 mm Max. tool length: 250 mm Max. tool weight: 6 kg Tool change time: approx. 6 seconds Feed rates: Rapid traverse X/Y/Z: 36 m/min Max. working feed rate: 12,000 mm/min Accuracy: Positioning accuracy: 0.010 mm according to ISO 230-2 Machine data: Machine weight: approx. 5,260 kg Coolant tank: 230 liters Compressed air supply: approx. 5 bar

Condition: ready for operation (used), Year of construction: 2025, operating hours: 58 h, travel distance X-axis: 650 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 640 HSCI, total height: 2,900 mm, total width: 2,650 mm, table width: 398 mm, table length: 398 mm, table load: 300 kg, overall weight: 5,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 22,000 W, number of slots in tool magazine: 40, tool weight: 8,000 g, positioning accuracy: 0.005 mm, product length (max.): 2,900 mm, number of axes: 5, This 5-axis KUNZMANN WF 650 5AX was manufactured in 2025. It features a maximum spindle speed of 12,000 rpm and a tool magazine capacity of 40 tools. The machine has an impressive X-axis travel of 650 mm, Y-axis travel of 500 mm, and Z-axis travel of 450 mm. If you are looking to get high-quality machining capabilities, consider the KUNZMANN WF 650 5AX vertical machining centre we have for sale. Contact us for further details. • Control Unit Brand: HEIDENHAIN • Control Unit Model: TNC 640 HSCI • A-Axis Travel: +105° / -120° • C-Axis Travel: ±360° • Table Diameter: 398 mm • Maximum Spindle Speed: 12000 rpm • Tool Magazine Capacity: 40 tools • Rapid Feed X/Y: 25 m/min • Rapid Feed Z: 20 m/min • A-Axis Max. Speed: 25 rpm • C-Axis Max. Speed: 25 rpm • A-Axis Positioning Accuracy: ±5 arcsec • C-Axis Positioning Accuracy: ±5 arcsec • A-Axis Torque: 700 Nm • C-Axis Torque: 450 Nm Djdpfszphg Isx Aqvscp • Control: HEIDENHAIN Conversational / DIN-ISO Programming • Machine Configuration: CNC Swivel Rotary Table (A/C Axis) • Spindle Cooling: Liquid Cooled Motor Spindle • Operating Hours (Program Run): 58 h Accessories: • 19" Touchscreen • HEIDENHAIN HR 510 FS Electronic Handwheel • Automatic Tool Changer • External Coolant System • Internal Coolant Through Spindle (Optional) • HEIDENHAIN TS460 Probe Preparation • TT460 Tool Measurement Preparation • SE661 Probe Receiver Extra Information • Showroom Machine • 12-Month Warranty • Retrofitting and Commissioning Available on Request (Additional Cost) Technical Specification Taper Size SK 40 Through-spindle Coolant No

Condition: used, Year of construction: 2002, machine/vehicle number: 810715, travel distance X-axis: 630 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller manufacturer: Siemens, controller model: 810D, table width: 500 mm, table length: 800 mm, table load: 500 kg, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 24, input voltage: 400 V, type of input current: DC, Equipment: chip conveyor, documentation/manual, Vertical machining center DECKEL MAHO DMC 63V Year of manufacture: 2002 Machine number: 810715 Condition: Used Delivery terms: Free on truck Location: 57482 Wenden Availability / Collection date: The machine is expected to be available in November 2026 and must be collected on a fixed date to be agreed upon (likely in calendar week 48-2026). Payment terms: Payment in advance - by bank transfer Internal no.: 181-1 Can be inspected while running: Yes Technical data: Control: Siemens Sinumerik 810D Tool holder: SK 40 Operating hours: 76,500 (will increase slightly, as the machine is still in production until collection) Spindle hours: 24,100 (will increase slightly, as the machine is still in production until collection) Travel distances X / Y / Z: 630 / 500 / 500 mm Table dimensions: 800 x 500 mm Table load: 500 kg Tool changer: 24-position Feed rate in X / Y / Z: 30,000 mm/min Rapid traverse rate in X / Y / Z: 30,000 mm/min Spindle speed max.: 10,000 High-pressure coolant system Chip conveyor 400 V / 30 kVA / 50 Hz Scope of delivery: Available manuals The hydraulic vices, the associated hydraulic unit, the tool holders, and the zero-point clamping system are not included in the scope of delivery! Djdpfxjz Nhizo Aqvscp Dimensions & Weights: Installation dimensions L x W x H approx.: 4000 x 3000 x 2650 mm Weight approx.: 5000 kg If you have any questions or would like to arrange a viewing, please do not hesitate to contact us! Additional information: ►Upon request, we can offer transport to the destination. ►The quoted price is net plus VAT. ►The goods are sold with the exclusion of any warranty. ►Technical data without guarantee. ►Subject to prior sale. ❗The sale of the goods is exclusively to business customers❗

Condition: ready for operation (used), Year of construction: 2021, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 828D, total height: 2,240 mm, overall weight: 3,500 kg, spindle speed (max.): 10,000 rpm, This 3-axis WAGNER WMC 600 L was manufactured in 2021, featuring a robust cast-iron frame and linear guides on all axes. It includes a Siemens 828 Basic ShopMill, an automatic double-arm tool changer with 16 stations, and a complete coolant system. The spindle supports speeds up to 10,000 rpm with a power of 11 kW. If you are looking to get high-quality milling capabilities consider the WAGNER WMC 600 L machine we have for sale. Contact us for more information. Additional equipment • Rigid cast-iron frame construction • Linear guides on all three axes • Automatic double-arm tool changer (16 stations) Dedpfx Aszvu Rmsqvocp • Complete coolant system • Central automatic lubrication • Air blast system for spindle cleaning • Machine enclosure with doors • Machine and signal lights • Documentation in English • CE-certified Machine Benefits Qualitative Machine Benefits • Machine is in excellent condition. Technical Machine Benefits • Spindle motor power (siemens s6 40%): 11 kw spindle motor power (siemens s1 100%): 5. 5 kw • Tool magazine capacity: 16 tools • Tool holder: din 69871 a sk 40 • Maximum tool diameter: 89 mm • Maximum tool weight: 7 kg • Tool change time: 2 seconds • Chip-to-chip time: 7 seconds • Table clamping surface: 800 x 400 mm • Table load capacity: 300 kg Extra Information Machine still under power Dimensions Machine Depth 2100 mm Technical Specification Taper Size SK 40

Condition: excellent (used), Year of construction: 2014, DMG MORI DMC 635V ecoline Year Built 2014 Control : Heidenhian Spindle 12,000rpm Dcodpjxgk Nmofx Aqvsp Taper : BT40 ATC 30

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 650 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, total height: 3,000 mm, total width: 2,330 mm, table load: 250 kg, overall weight: 9,200 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 20,000 W, tool weight: 8,000 g, product length (max.): 2,880 mm, number of axes: 5, This 5-axis EMCO MAXXMILL 500 was manufactured in 2016. It features a maximum spindle speed of 15,000 rpm and a tool magazine capacity of 40 tools, allowing for efficient machining operations. The machine includes a swivelling-rotary table with a clamping area of 600 x 600 mm and a maximum workpiece size for 5-side machining of 500 x 500 x 475 mm. If you are looking to get high-quality milling capabilities, consider the EMCO MAXXMILL 500 vertical machining centre. Contact us for further details. • B-axis (tilting): ±100° • C-axis rotation: 0–360° continuous • Rapid traverse X/Y/Z: 30 m/min • Max rotational speed B/C axes: 25 rpm / 25 rpm • Spindle nose to table distance: 150–650 mm • Max acceleration X/Y/Z: 3 m/s²Main spindle • Max torque: 100 NmWorking table • Type: Swivelling-rotary table • Clamping area: 600 × 600 mm • Max workpiece size for 5-side machining: 500 × 500 × 475 mm • T-slots: 5 • T-slot spacing: 100 mm • Table-to-floor distance: 776 mmTool changer • Magazine type/capacity: Drum magazine, 40 tools • Tool change system: Double-gripper arm • Tool-to-tool time: 2 s • Max tool diameter: 80 mm (125 mm without adjacent tools) • Max tool length: 250 mm • Max total magazine load: 100 kg • Tool management: RandomAccuracy (manufacturer nominal) Dodpfx Aqe Ah H Nqsvjcp • Positioning accuracy X/Y/Z: 8 µm • Repeatability X/Y/Z: 3 µm • B-axis positioning accuracy: ±20 arcsec • C-axis positioning accuracy: ±10 arcsecCoolant system • Tank capacity: 250 L • Standard pump pressure: 2 bar • Max flow at 2 bar: 40 L/minCondition, refurbishment, and status • Comprehensive refurbishment by specialist: • Complete refurbishment and installation/adjustment of swivelling-rotary table • Extensive cleaning and reconditioning • Installation and setup of workpiece and tool measurement probes • Automatic kinematic calibration (KINEMATIC AUTO) • Brand-new main spindle installed • Machine connected to power and operational • Milling test possible Additional equipment • Automatic workpiece probe • Laser tool measurement system • Through-spindle coolant system, 20 bar • Chip conveyor (chip discharge height: 1,100 mm) • Linear scales on X, Y, Z • Automatic machine door • Automatic kinematic system (KINEMATIC AUTO) • Oil supply for machining fixtures via rotary joint at table centre • Spare spindle available (inclusion in sale to be confirmed) Technical Specification Taper Size ISO 40

Condition: ready for operation (used), Year of construction: 2015, operating hours: 1,748 h, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 840 D, total height: 2,650 mm, total width: 2,530 mm, table width: 790 mm, table length: 560 mm, table load: 600 kg, overall weight: 3,900 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 17,000 W, number of slots in tool magazine: 20, product length (max.): 2,050 mm, number of axes: 3, This 3-axis DMG MORI ecoMill 635 V was manufactured in 2015. It features an X-axis travel of 635 mm, Y-axis travel of 510 mm, and Z-axis travel of 460 mm. The machine has a robust table size of 790 x 560 mm and a maximum table load of 600 kg. If you are looking to get high-quality machining capabilities, consider the DMG MORI ecoMill 635 V vertical machining center we have for sale. Contact us for further details. • CNC control: electronic handwheel • Operating hours: Power on approx. 13,550 h; Spindle cutting approx. 1,748 h • Table: 790 × 560 mm • Spindle: 12,000 rpm; SK40 / ISO40; Power approx. 13–17 kW • Tool magazine: 20 positions; Automatic double‑arm tool changer • Feed rates: Rapid traverse 30 m/min • Coolant: Flood coolant system • Drives: Digital AC servo drives • Electrical: 400 V / 50 Hz / 3‑phase; Rated power 17 kVA • Other: Machine connected and under power; very low spindle cutting hours for the year; good technical condition Additional equipment Dsdpoy T R I Eofx Aqvscp • Scraper-type chip conveyor • Discharge height: 950 mm • Tank capacity: 200 l • Coolant spray gun for swarf removal • Standard 4-color signal lamp • PROGRESSline & Planolight package Technical Specification Taper Size SK 40

Condition: good (used), Year of construction: 2004, operating hours: 6,900 h, functionality: fully functional, Controller: ULTIMAX4 DSM with LCD screens Table dimensions: 762 x 355 mm X-axis travel: 660 mm Y-axis travel: 355 mm Z-axis travel: 455 mm Spindle speed: 10 – 10000 rpm Spindle taper: SK40 Tool changer: 16-station Main drive power: 11 / 9.4 kW Machine weight: 2800 kg Machine dimensions: 1800 x 1600 x 2500 mm Accessories: Dcjdpfszmhy Asx Aqvsp - Software version 2.37 with English user interface - Software options: Rigid tapping, Pockets/Islands, AVC, Helical/Ramp, ULTINET (Network) - Coolant system - Signal lamp - USB interface - Portable electronic handwheel - Machine feet The machine is in good used condition. Still under power. It is being sold due to company liquidation.