Used machining centers (vertical) X-axis travel 400-599mm for sale (219)

Condition: good (used), Year of construction: 2008, Röders RXP 500 DS with RC 2 / 5 axes, year of manufacture 2008, Röders control, travel X/Y/Z 500/400/240 mm, Gsdpfxexmhmpo Aayoca 2-axis NC swivel/rotary table 550 x 450 mm, max. workpiece weight 400 kg, spindle speed up to 42,000 rpm, linear drive X/Y/Z, 42-position tool changer, HSK E 40, 96-position electrode changer, all axes completely overhauled in 2021, used exclusively for electrode milling.

Condition: good (used), Year of construction: 2010, operating hours: 78,572 h, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, feed rate X-axis: 500,000 m/min, feed rate Y-axis: 50,000 m/min, feed rate Z-axis: 50,000 m/min, overall weight: 12,000 kg, Special Equipment of the Machine 1. Extension of the tool magazine from the standard 30 tools to 210 tools, incl. preparation for 240 1. Pallet round storage for 10 pallets, incl. setup station, Number of pallets: 10, Pallet size: D 130 mm, Pallet interface: Capto C6 Max. workpiece size: D 250 x H 250 mm Max. workpiece weight: 40 kg Pallet clamping force: 22.5 kN 1. HSC main spindle 40 – 20,000 rpm with 7.5/11 kW motor, Max. spindle torque: 70 Nm up to 1,500 rpm, Including weekly timer for starting the warm-up cycle and automatic machine shutdown 1. Spindle interface HSK 63A 1. Direct travel measuring system (Heidenhain) on X, Y, and Z axes, supplied with purge air 1. KNOLL coolant system, consisting of: - Scraper belt chip conveyor with lift pump and chip discharge to operator side - Through-spindle coolant supply with KTS25-50T coolant pump, 24 l/min at 70 bar, 5.5 kW Coolant pressure switchable in 3 stages - External cooling with coolant pump, 100 l/min at 1.4 bar - Coolant shower with coolant pump, 100 l/min at 1.4 bar - Compact filter KF200, filter capacity 200 l/min Overall unit dimensions (L x W x H): approx. 1.8 x 1.1 x 1.0 m Tank volume: approx. 1,400 liters 1. Cooling water recooler VWK 90 – D emulsion Cooling capacity: 11.5 kW Ambient temperature up to 42°C Refrigerant: R407c 1. Coolant spray gun in the working area including pump and electrical installation 2. Spiral chip conveyors 1. TEBARON mechanical air filter TEB/BV2 for extraction of emulsion, oil mist, and smoke, consisting of: - 3-stage prefilter pack - HEPA filter according to DIN EN 603335-2-69 with BIA test certificate, separation efficiency > 99.995% for particles ≥ 0.3μ. - Fulfills requirements for application categories K1/K2 (carcinogenic substances and pathogens) as well as dust class H. 1. Single support with base plate for ISI air filter TEB/BV2 1. RENISHAW OMP 60 probe for automatic zero point setting and workpiece measurement, can be changed into the spindle via tool changer: Including EASY PROBE SOFTWARE Pressure sensor for tool length measurement and tool breakage monitoring Gedpfxoxwm Adj Aaysca Special accessories for the control system 1. Increase in workpiece coordinate systems from 6 to 54 1. Coordinate system rotation G68/G69 1. Chamfering and rounding corners 1. Automatic zero point tracking 1. Contour re-approach 1. Extension of macro variables from standard 100–149, 500–549 to 100–199, 500–999 1. IZ2/150NF HSC precision control for simultaneous 5-axis machining, consisting of: - Fast Data Server function - High-Speed Precision Contour Control - Nano Smoothing - Dynamic zero point tracking (up to 8 different zero points available, G54.2) - TCPC (Tool Center Point Control) for 5-axis simultaneous milling (G43.4/G49) - Swivel cycle enables machining on an inclined working plane (G68.2/G53.1/G69)

Condition: excellent (used), Working travels 510 x 360 x 300 mm Table size 600 x 360 mm Spindle taper BT30 Spindle speeds -12'000 rpm Tool changer 20 Pos. Control FANUC 18i-MB Coolant through spindle Gcedpfx Aasuy S Hbsyja misc. accessories MARCELS MASCHINEN CH

Condition: used, Chiron FZ18W Magnum rotopallet Gcjdpfxehkkwbj Aayoa 1999 CNC Siemens 840D X 630 Y 400 Z 425 tables (2) 850x450mm 20 tools ISO 40 / 18kW / 140 Nm 40m/min HAWE hydraulics automatic doors swarf conveyor 6 ton 3,6 x 2,25 x 2,85 machine can be inspected under power in our warehouse Mimu Machine Tools (Italy)

Condition: used, Year of construction: 2003, Milling machines Travel distance X: 415 mm Travel distance Y :340 mm Travel distance Z: 355 mm HSC-machines Number of axis: 3 milling machine / machining center Control: Heidenhain iTNC 530 spindle chuck: HSK 40 E spindle revolutions: 42000 rpm table size X: 470 mm table size Y: 400 mm max. workpiece weight: 500 kg tool changer: 30 - time Gjdpfx Aovtfpfeaysca Rapid traverse: 30 m/min electronic handwheel

Condition: new, functionality: fully functional, feed length X-axis: 1,000 mm, feed length Y-axis: 600 mm, feed length Z-axis: 650 mm, spindle speed (max.): 10,000 rpm, XV 1060 Control SINUMERIK 828 D - ShopMill with 15.6" touch screen Clamping surface 1,160 x 600 mm, number of T-slots: 5 X-axis: 1,000 mm, Y-axis: 600 mm, Z-axis: 650 mm Min. distance spindle nose - table: 130 mm, max. 780 mm SK 40 taper, spindle max. speed 10,000 rpm Double-arm tool changer, 24 tools Standard features: - Rigid tapping - Swiveling operator panel Gcjdpfx Aexugyqsayoa - Sliding door with interlock - Viewing windows in work area enclosure - Control cabinet with heat exchanger - 2 LED work area lights - 3-color machine status indicator light - Portable electronic handwheel - Central automatic grease lubrication for all linear axes and X, Y, Z ball screws - Power-off after program end - Compressed air at main spindle for chip removal - Chip flushing system with rinse gun - Spindle cooler for 10,000 rpm - Air gun - Coolant nozzles at spindle - Work area lighting on/off switch - 1 set of leveling elements - Electrical system in accordance with VDE regulations

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Fanuc Robodrill T14iA Vertical Machining Centre for sale. 1998 model with 8,000 rpm spindle and 14 tool ATC. SPECIFICATION Traverses X Axis 500mm Y Axis 380mm Z Axis 300mm Spindle Nose to Worktable Minimum 250mm Maximum 550mm Work Table Table working surface 650 x 400mm Table loading capacity (uniform load) 200kg Table surface configuration Number of T slots 3 Width 14mm Pitch 125mm Machine Dimensions Width 1550mm Gcjdpfxjnq Dguj Aayoa Depth 1900mm Height (min/max) 2067 / 2367mm Weight (approximately) 2100kg Spindle Speed range 100 – 8,000rpm Taper BT30 Feedrates Rapid traverse rate 48m/min Feedrate 1 – 30,000mm/min Toolchanger ( MAS BT30 Tools) Tool storage capacity 14 tools Tool change time – cut to cut 0.9 secs (2kg) Tool Diameter 80mm Tool Length 200mm Tool Weight 2Kg Coolant tank capacity 100 litres CNC Control System Fanuc Series 16iM Electrical Supply 415V, 3 ph , 50Hz Compressed Air Supply 5kgf/cm2 (100 litres/min) MACHINE EQUIPPED WITH:- Coolant system Lighting Enclosed guarding

Condition: excellent (used), Year of construction: 2015, Various Chiron spare parts Some as new or overhauled Gcedpfx Aaowr Ua Aoysa

Condition: used, Year of construction: 2005, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 560 mm, - Manufacturer: Matsuura - Fanuc 31i with Manual Guide - Model: V-plus 550 - Year of manufacture: 2005 - X-axis: 550.0 mm - Y-axis: 410.0 mm - Z-axis: 560.0 mm - Table length: 870.0 mm - Table width: 400.0 mm - Max. workpiece weight: 400.0 kg - Tool magazine capacity: 30 positions for BT40 - Max. spindle speed: 15,000 rpm - Through-spindle coolant - Marposs laser probe Gjdpfxexwbqcj Aayeca - Machine documentation

Condition: new, Year of construction: 2025, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, About us Since 2014, we have been developing and manufacturing our systems in Austria as a machinery manufacturer. In addition to our individually customizable standard machines, we are also able to provide special solutions. We are happy to send you our product catalog—just contact us. Machining Center HSC 544HP 3rd Generation Key Data - Travel: 500 x 400 x 330 mm - BT30 spindle with 30,000 rpm and 6 Nm - 18-position tool magazine - Feed rate up to 27 m/min - Compact dimensions: W 1,460 x D 1,470 x H 2,110 mm, weight approx. 2,200 kg The machines are configured and assembled to customer specifications. Depending on requirements, numerous options are available, such as various spindle types up to 60,000 rpm, different cooling systems, direct position measuring, integrated automation solutions, and more. Control System - CS-Lab / AMT | Beckhoff optional - Clear and customizable user interface and easy operation via touchscreen - S-curve acceleration for dynamic axis movement with high precision - Integration of e.g. robots, pallet changers, workpiece changers, etc. possible Machine Frame - Heavy-duty frame made of mineral cast, optimized through FEM simulations - Very high vibration damping, rigidity, and ideal thermal characteristics Gjdpextvhuofx Aayjca - Use of linear roller guides instead of conventional ball guides for maximum rigidity - High-speed ball screws with low heat development Drive Train - Precisely matched AC servo drives for high contour accuracy - Direct-drive backlash-free ball screws Overview of Spindle Types 60,000 rpm | 0.3 Nm 40,000 rpm | 0.9 Nm 36,000 rpm | 2.4 Nm 30,000 rpm | 3.5 Nm 30,000 rpm | 6.0 Nm 20,000 rpm | 10.5 Nm We are happy to offer you professional and comprehensive consulting to deliver the perfect solution for your machining and production requirements.

Condition: used, Year of construction: 1998, x-travel 480 mm y-travel 360 mm z-travel 270 mm Control Brother turning speed range - main spindle 6 - 6.000 min/-1 drive capacity - main spindle 5 / 7 kW tool taper SK 30 table surface area 600 x 300 mm rapid traverse ( x / y / z ) 36 / 36 / 30 m/min Godpfxjxddvhe Aaysca number of tool places 14 Pos. The machine is defective and is being sold as a spare parts carrier. The extraction system is NOT included in the scope of delivery. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical specifications and information, as well as subject to prior sale!

Condition: not inspected (used), Year of construction: 2004, functionality: unexamined, travel distance X-axis: 510 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, workpiece diameter (max.): 500 mm, rotational speed (max.): 12,000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel paths: X-axis: 510 mm Y-axis: 510 mm Z-axis: 460 mm Workpiece dimensions: Maximum diameter: 500 mm Maximum height: 405 mm Table: Number of tables: 1 Table diameter: 500 mm Table width: 400 mm Maximum table load capacity: 300 kg Number of T-slots: 5 T-slot width: 80 mm Reference slot: 50 mm Table height: 800 mm Distance spindle nose – table, max.: 650 mm Distance spindle nose – table, min.: 190 mm Distance spindle nose – table center, max.: 600 mm Distance spindle nose – table center, min.: 140 mm Speeds: Rapid traverse X-axis (max.): 50 m/min Rapid traverse Y-axis (max.): 50 m/min Rapid traverse Z-axis (max.): 50 m/min Feedrate X-axis (max.): 50 m/min Feedrate Y-axis (max.): 50 m/min Feedrate Z-axis (max.): 50 m/min Spindle: Maximum speed: 12,000 rpm Minimum speed: 35 rpm Spindle motor (15 min): 22 kW Spindle motor (continuous): 15.0 kW Maximum tool diameter with adjacent tool: 80 mm Maximum tool diameter without adjacent tool: 125 mm Maximum tool length: 300 mm Tool change time (C/C): 4.5 s MACHINE DETAILS Electrical supply: Power (30 min): 66.6 kVA Power (continuous): 49.9 kVA Compressed air supply: Pressure: 500 kPa Flow rate: 200 l/min Cooling system: Total tank volume: 300 l Dimensions & Weight: Gcedpfx Ajxldrxeayoa Dimensions (L x W x H): 3,015 x 2,805 x 2,964 mm Weight: 7,600 kg EQUIPMENT Operator door lock with switch Full enclosure Top cover Transformer for Europe (CE) Ball screw cooling (X, Y, Z) Automatic tool measurement & Mazatrol PC-FUSION-CNC 640M 5X control Additional variables (600) Mazak Tornado thread cutting-drilling Mazatrol Mazak Tornado thread cutting-drilling (EIA) Intersection calculation between 2 lines Zero offset Reverse execution of commands G37 automatic tool length measurement Sequence comparison function RS-232C interface Mazacc 2D high-speed software Additional coordinate system (G54.1) Thread cutting function Machining navigation – forecast Machining navigation – control Machining navigation – results PCMCIA interface (2 slots) IC memory card interface Complete coolant system Lighting Manuals Note: The machine has not been used for 2 years, but was running smoothly up to that point. Pallets are included in the scope of sale and delivery. Tools and tool holders are not included in the scope of sale and delivery.

Year of construction: 1990, condition: good (used), machine/vehicle number: 92041, table mounting size: 410 x 900 mm movements x/y/z: 560/410/380 mm Gcedpfx Aasdhhprsyja spindle taper: SK 40 spindle turning speed range: 22 - 6000 rpm carriages: x/z until 10000, y until 240 mm/min space needed: 2600 x 2000 x 2300 mm weight: 3500 kg

Condition: excellent (used), Year of construction: 2014, operating hours: 21,800 h, functionality: fully functional, machine/vehicle number: P147YH288, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, nominal power (apparent): 11 kVA, overall weight: 2,200 kg, spindle speed (min.): 24,000 rpm, coolant supply: 40 bar, number of slots in tool magazine: 21, Equipment: chip conveyor, documentation/manual, Equipment: - FANUC DDR-T 4th axis digital rotary table with tailstock - high-pressure through-spindle coolant, 24,000 rpm - 200L chip conveyor with high-pressure pump - automated side door for robotic loading - machine under annual FANUC maintenance contract - optional extra: integrated Fanuc M20iA12L robot already mounted on the machine Gcjdpfsxnhvyex Aaysa

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 111855/111856/111640, overall weight: 2,250 kg, Offer Package: Brother Machining Centers Two fully operational machines and one defective machine included free when purchasing the complete package. Single owner from original use. Machines powered and ready for demonstration. Machine No.1 Brother TC-22A – Year of manufacture: 03/2001 – Serial No.: 111855 Equipment: - Travel paths: 500 x 400 x 410 mm - HSK-A40 tool spindle - Spindle speed: 12–12,000 rpm - Coolant filtration unit 20 μm - Through-spindle coolant 70 bar - Interface for connecting Kitagawa rotary table - Machine weight: 2,250 kg Machine No.2 Brother TC-22A – Year of manufacture: 03/2001 – Serial No.: 111856 Equipment: - Travel paths: 500 x 400 x 410 mm - HSK-A40 tool spindle - Spindle speed: 12–12,000 rpm - Coolant filtration unit 20 μm - Through-spindle coolant 70 bar - Interface for connecting Kitagawa rotary table - Machine weight: 2,250 kg Machine No.3 Brother TC-22A – Year of manufacture: 03/2000 – Serial No.: 111640 – defective Included as a spare when purchasing the complete package Spindle controller PE9A300UXXXC03H defective Equipment: - Travel paths: 500 x 400 x 410 mm - HSK-A40 tool spindle - Spindle speed: 12–12,000 rpm - Coolant filtration unit 20 μm - Through-spindle coolant 70 bar - Interface for connecting Kitagawa rotary table - Machine weight: 2,250 kg Total price for all three items. Ex works Luckenwalde (Germany), not loaded, without transport. Godexp N Dbopfx Aayeca Individual sale of the machines may be possible.

Condition: new, Year of construction: 2025, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, About us Since 2014, we have been developing and manufacturing our systems as a machine builder in Austria. In addition to our individually adaptable standard machines, we are also able to offer custom solutions. We would be happy to send you our product catalogue—just get in touch with us. Machining Center HSC 544S 3rd Generation Key Data - 500x400x330mm traverse paths - ISO20 spindle with 30,000rpm and 0.6Nm - 18-position tool magazine - Feed rate up to 27m/min - Compact dimensions: W 1,460 x D 1,470 x H 2,110mm, weight approx. 2,200kg The machines are configured and built according to customer specifications. Depending on your requirements, a wide range of options is available, such as different spindle types up to 60,000rpm, various cooling systems, direct position measurement systems, integrated automation, etc. Control System - CS-Lab / AMT | Beckhoff optional - Intuitive and customizable user interface, simple operation via touchscreen - S-curve acceleration for dynamic axis movement with high precision - Possible integration of robots, pallet changers, workpiece changers, etc. Machine Frame - Solid machine frame made from mineral cast, optimized using FEM simulations - Excellent vibration damping, rigidity, and ideal thermal behavior - Use of roller guides instead of conventional ball guides for maximum rigidity - High-speed ball screws with reduced heat generation Drive Train - Precision-matched AC servo drives for high contour accuracy - Directly driven, backlash-free ball screws Spindle Types Overview 60,000 rpm | 0.3 Nm 40,000 rpm | 0.9 Nm 36,000 rpm | 2.4 Nm Gcedpfoxtvhnsx Aayja 30,000 rpm | 3.5 Nm 30,000 rpm | 6.0 Nm 20,000 rpm | 10.5 Nm We will be happy to provide you with professional and comprehensive advice, ensuring you receive precisely the right solution for your machining requirements.

Condition: used, x-travel 500 mm y-travel 500 mm z-travel 500 mm Control Fanuc 18i-M spindle tunring speed 12.000 U/min Gcodpfewwavtjx Aaysa tool taper HSK-A 63 number of tool places 24 Pos. In our opinion, the machine is in good used condition and can be inspected under power by appointment. There are 2 identical machines available. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: ready for operation (used), Year of construction: 2007, operating hours: 16,581 h, functionality: fully functional, machine/vehicle number: 9108 000 046S, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, table load: 200 kg, spindle speed (max.): 10,000 rpm, Machining Center with B & C Axis! TECHNICAL DETAILS X-axis: 500 mm Y-axis: 450 mm Z-axis: 400 mm B-axis: -5 / +100° C-axis: +/- 360° Work Table Clamping Area: Ø630 x 500 mm Max. Table Load: 200 kg Spindle Speeds: 10,000 rpm Tool Holder DIN 69893: HSK-A63 Tool Magazine Positions: 16 MACHINE DETAILS Control: SIN 840 D Total Power Requirement: 38 kVA Dimensions & Weight Dimensions: 5 x 5.5 x 2.5 m Machine Weight approx.: 4,500 kg Operating Hours Spindle Hours: 16,581 h Power-On Hours: 28,521 h Gedpsxf A S Defx Aayoca EQUIPMENT Renishaw NC4 Tool Measuring Renishaw probe preparation Electronic Handwheel Spindle Oil Cooling System Coolant Recirculation with Ruma Centrifuge Kraft & Bauer fire extinguishing system (incl. extinguishing agent bottle) Elbaron Air Purification System 4 machine feet

Year of construction: 1999, condition: good (used), machine/vehicle number: 112150, Table surface area: 300 x 500 mm Travels x / y / z: 420/300/250 mm Spindle mount: BT 30 Gcsdpfx Aaef Sainoyja small / large Distance table / spindle: Spindle speeds: approx. 10 - 10000 rpm Feeds: approx. 5 - 10000 mm / min Rapid traverse: x u. y / z 25/20 m / min Spindle drive: 7 kW electr. Connection: 400 V, approx. 9 kVA kW Required space: 2500 x 1500 x 1450 mm Weight: approx. 2800 kg

Condition: excellent (used), Year of construction: 2017, operating hours: 15,200 h, functionality: fully functional, machine/vehicle number: P172ZH357, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, nominal power (apparent): 11 kVA, overall weight: 2,200 kg, spindle speed (min.): 24,000 rpm, coolant supply: 40 bar, number of slots in tool magazine: 21, Equipment: chip conveyor, documentation/manual, Equipment: - FANUC DDR-T 4th axis digital rotary table with tailstock - high-pressure through-spindle coolant, 24,000 rpm - 200L chip conveyor with high-pressure pump - automated side door for robotic loading - machine under annual FANUC maintenance contract - optional extra: integrated Fanuc M20iA12L robot already mounted on the machine Gcsdpfx Aaoxnhtloysa

Condition: used, Year of construction: 2017, x-travel 560 mm Godpjxbtm Rjfx Aayjca y-travel 560 mm z-travel 660 mm control Siemens Sinumerik Celos weight of the machine ca. 9240 kg

Year of construction: 2003, condition: good (used), Strokes 560x 410 x 510 mm, table 900 x 410, magazine 30 tools, spindle 12.000 rpm, chip conveyor Gcsdpfx Asiwkhkoayja

Condition: ready for operation (used), Year of construction: 2012, operating hours: 21,109 h, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 500 mm, controller manufacturer: Fanuc, spindle speed (max.): 20,000 rpm, number of slots in tool magazine: 80, TECHNICAL DETAILS Travel X-axis travel: 550 mm Y-axis travel: 1,000 mm Z-axis travel: 500 mm Axes A-axis: +300° / -120° C-axis: 360° C-axis resolution: 0.0001° Clamping Table Table dimension: Ø 500 mm Table dimension with zero-point system: 356 mm x 356 mm Max. table load: 350 kg T-slots: 18H8 x 4 Workpiece size: 650 x 500 mm Spindle Spindle speed range: 50 – 20,000 rpm Spindle power: 18.5 kW (S6) Gedpfx Aew Stpusaysca Spindle torque: 95 Nm (S6) Tool holder: HSK63 Control Control manufacturer: Fanuc Automatic Tool Changer Tool holder: HSK63 Number of tool positions: 80 Indunorm Pallet Changer Pallet size 1 for automation: 6 pcs 398 mm x 398 mm Preset pallet for Erowa IST: 1 pc 398 mm x 398 mm Pallet size 2 for automation: 15 pcs Erowa ITS115 mm Pallet size 3 for automation: 32 pcs Erowa ITS50 mm Transfer weight incl. pallet: 300 kg Rapid Traverse Rapid traverse X-axis: 48 m/min Rapid traverse Y-axis: 50 m/min Rapid traverse Z-axis: 50 m/min Rapid traverse A/C-axis: 18,000°/min (equivalent to 50 rpm) Feed Rate Feed X-axis: 32 m/min Feed Y-axis: 40 m/min Feed Z-axis: 40 m/min Feed A/C-axis: 12,000°/min (equals 33.3 rpm at max. 500 kg) Feed A/C-axis: 18,000°/min (equals 50 rpm) MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,550 x 3,200 x 2,900 mm Machine weight: 16,000 kg Operating Hours (as of 30.04.2025) Power-on hours: 41,624 h Operating hours: 21,877 h Machining hours: 16,829 h Spindle hours: 21,109 h EQUIPMENT - Chip conveyor - Paper band filter - Bed flushing - Electronic handwheel - 6 Parotec pallets 398 mm x 398 mm - 1 Pre-pallet Parotec for Erowa ITS 398 mm x 398 mm - Extensive Fanuc control options - Machine documentation - Marposs infrared probe - Preparation for oil mist extraction - Blum laser tool measurement - Work area flushing - Hand rinsing gun - External coolant with 3 nozzles, 7 bar - Internal coolant 15 bar - Coolant temperature control - Internal & external air supply

Condition: like new (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: MV0098-000226, travel distance X-axis: 520 mm, travel distance Y-axis: 360 mm, travel distance Z-axis: 350 mm, rapid traverse X-axis: 48 m/min, rapid traverse Y-axis: 48 m/min, rapid traverse Z-axis: 56 m/min, nominal power (apparent): 16 kVA, controller manufacturer: FANUC, workpiece weight (max.): 200 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 200 h, number of slots in tool magazine: 21, tool diameter: 200 mm, input voltage: 380 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The machine is in perfect condition, with only 200 spindle hours since new. It never had a collision. It is possible to inspect the machine under power and verify its geometry. Free packaging and loading on truck. Included in the package: 3D probing system Tool measurement probe (the stylus is damaged — we can replace it) Through-spindle coolant (TSC) Chip conveyor Gsdpfexpuwmjx Aaysca 21-tool magazine

Condition: good (used), Year of construction: 2008, travel distance X-axis: 450 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 380 mm, controller manufacturer: Siemens, controller model: Shopmill, total height: 22,000 mm, total length: 24,500 mm, total width: 15,500 mm, table width: 700 mm, table length: 320 mm, rotational speed (max.): 10,000 rpm, overall weight: 2,000 kg, number of slots in tool magazine: 12, power: 8.5 kW (11.56 HP), X-axis: 450 mm Y-axis: 350 mm Z-axis: 380 mm Table size: 700 x 320 mm Spindle speeds: 10.000 rpm Spindle nose: ISO40 Toolchanger: 12 pockets Controller: Siemens Shopmill Featured with: Gcjdpfx Ajtrhahjaysa - Cooling unit - ISO40 tools - Milling vice Country of origin: Taiwan Motor power: 8,5 kW Machine LxWxH: 2450 x 1550 x 2200 mm Machine weight: 2000 kg