Used machining centers (vertical) X-axis travel 400-599mm for sale (248)

Condition: used, functionality: fully functional, ROSILIO MILLING MACHINE Type: C640 – Vertical machining center Travels (mm): X: 640 • Y: 400 • Z: 400 Table: 800 × 400 mm Maximum table load: Approximately 300–400 kg Dedpfx Ajzb Dcqskkouw Spindle speed: Up to 8,000–10,000 rpm (5.5–7.5 kW motor) Rapid traverse rates: 20–24 m/min Numerical control: Siemens Total weight: Approximately 2.8–3.2 tons Approximate specifications

Condition: ready for operation (used), Year of construction: 2015, travel distance X-axis: 550 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 460 mm, controller manufacturer: SIEMENS, total height: 2,200 mm, total width: 2,164 mm, table load: 300 kg, overall weight: 2,800 kg, spindle speed (max.): 100,000 rpm, spindle motor power: 11,000 W, number of axes: 3, This 3-axis Optimum Optimill F105 was manufactured in 2015. It features an X-axis travel of 550 mm, Y-axis travel of 305 mm, and Z-axis travel of 460 mm. The machine is equipped with a spindle power of 7.5 kW and a maximum spindle speed of 10,000 rpm. If you are looking to get high-quality machining capabilities, consider the Optimum Optimill F105 vertical machining centre we have for sale. Contact us for further details. Duedpezg Ecbefx Akkew • Rapid traverse (X/Y/Z): 10,000 mm/min • Work table size: 800 × 320 mm Technical Specification Taper Size BT 40

Condition: used, Year of construction: 2000, x-travel 760 mm y-travel 550 mm z-travel 300 mm Dedpfx Akozhn T Eeksuw Control RMS6V3.15 tool change unit 25-fach tool taper HSK E40 turning speeds 42.000 U/min table-size 860 x 550 mm table load 800 kg total power requirement 14 kW weight of the machine ca. 5200 kg dimensions of the machine ca. 2,5 x 2,1 x 2,55 m 3-axis high-speed machining centre, Roeders RFM760, year of manufacture 2000, installation in 2001 Key specifications: Roeders RFM760 high-speed machining centre with accessories (tool holders, tool shrink-fitter, etc.). The machine is fully operational, well-maintained, serviced and powered up (battery maintenance). • Spindle: Newly fitted in December 2022, in use until March 2023 – Estimated running time approx. 75 hours (de-registered by the company in March 2023) • Control system: Röders, software: RMS6V3.15 (211) • Operating system: Windows NT • Complete system updates approx. 2010 and 2016 • TFT screen The machine has been used exclusively for electrodes (primarily graphite and copper) and finishing of mould inserts – no roughing! The machine is available for viewing at any time and is ready for immediate collection. Specifications for the Roeders RFM 760 high-speed cutting centre - 25-position tool changer with laser tool measurement (length and diameter) - ISO spindle mount: HSK E40 - IR 3D probe (for workpiece measurement) - Dust extraction (graphite) - Cooling unit - Spray cooling for tool / workpiece - Roeders tool shrink-fitter - Fischer MFW-1230/42 spindle (42,000 rpm), new in December 2022 - Fixed chuck, new in 2022 - Accessories: milling cutter chucks, consumables, ...

Condition: ready for operation (used), Year of construction: 2001, operating hours: 94,204 h, travel distance X-axis: 550 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 426, overall weight: 8,700 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 48, number of axes: 5, This 5-axis CHIRON FZ 15K S was manufactured in 2001. It features a spindle speed of 12,000 rpm and a tool magazine with 48 positions, providing efficient machining capabilities. The machine is equipped with a Peiseler swivel rotary table and an internal through-spindle cooling system. If you are looking to get high-quality machining capabilities, consider the CHIRON FZ 15K S vertical machining centre we have for sale. Contact us for further details. - Number of Axes: 5-axis (3+2 configuration)- Axis Table: Peiseler swivel rotary table equipped with HSK 100 clamping / LANG clamping system- Cooling: Internal through-spindle cooling system (IKZ)- Chip Management: Chip conveyor system- Workpiece Measuring: Renishaw probe- Working Voltage: 400 V- Control Voltage: 230 / 24 V- Power Rating: 47 kVA- Rated Current: 67 A- Fuse: 80 A Dedpfxszggb Ej Akkouw Technical Specification Taper Size HSK 100 Through-spindle Coolant Yes

Condition: excellent (used), Year of construction: 2004, TECHNICAL SPECIFICATIONS Model: ROSILIO C 450 Numerical control – CNC unit – FAGOR 8055 CNC control Table dimensions: 770 x 300 mm Djdsyl Ng Aepfx Akkeuw Travel: X: 450 mm, Y: 400 mm, Z: 450 mm Taper: BT 40 Power: 7.5 kW Spindle speed: 8,000 rpm Machine dimensions: 1900 x 1600 x 2150 mm Weight: 2,900 kg

Condition: ready for operation (used), Year of construction: 2001, operating hours: 28,585 h, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 9,000 rpm, number of axes: 5, This 5-axis DECKEL MAHO DMU 50T was manufactured in 2001. It features a maximum spindle speed of 9,000 RPM and an impressive X-axis travel of 500 mm, Y-axis travel of 400 mm, and Z-axis travel of 400 mm. The machine includes a turret with 16 positions and a round axis diameter of 700 mm. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMU 50T vertical machining centre we have for sale. Contact us for further details. • Round axis: dia 700 x 500 • Turning of the table: 360 deg • Swing zone: deg Dedezf Ag Ijpfx Akkouw • Positions in turret: 16 Technical Specification Taper Size SK 40

Condition: used, Year of construction: 2005, machine/vehicle number: 107.32.99.158, travel distance X-axis: 530 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, controller model: Heidenhain iTNC 530, spindle speed (max.): 12,000 rpm, Re-auction due to buyer’s payment default! Duodpfx Aoziz Ncokkew The machine spindle was replaced in July 2025! TECHNICAL DETAILS Travel range X-axis: 530 mm Travel range Y-axis: 450 mm Travel range Z-axis: 450 mm Rotary table Table diameter: 400 mm Table load capacity: 200 kg Swivel range: degrees Swivel speed: 20 rpm Rotational speed: 30 rpm Tool holder: SK40 Maximum speed: 12,000 rpm Recommended maximum working feed rate: 15 m/min Rapid traverse speed: 22 m/min Feed force X and Y/Z: 5,000 N Magazine capacity: 30 Maximum tool diameter: 90 mm Maximum tool length: 250 mm (manual 350 mm) Maximum tool weight: 6 kg MACHINE DETAILS Control system: Heidenhain iTNC 530 with digital control Positional tolerance according to DIN/ISO 230-2/97: 0.008 mm Machine weight: 6,500 kg EQUIPMENT RENISHAW MP 12 measuring probe Blum tool monitoring system

Condition: good (used), Year of construction: 2005, Parts shown by hand not come. Dodpfx Akjvf D Anokeuw

Condition: used, Year of construction: 2011, Available immediately from university stock: CNC vertical 4-axis simultaneous machining center VF 1 – HE Full-fledged 4th axis and Haas rotary table HRT 160 Year of manufacture: 2011 Table size: 900 x 450 mm Travel distances: 500 x 400 mm SK 40 tool holder 20-position tool changer Duodpsziw E Hjfx Akksw Spindle power: 15 kW Spindle speed: 7500 rpm Electronic multi-function handwheel on the control panel Coolant system Chip conveyor 4th axis fully functional, programmable to 0.001 degrees HRT-160: Detachable rotary table with a 160 mm clamping surface Programmable PCOOL additional coolant nozzles

Condition: like new (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, Vertical machining center Manufacturer: Fehlmann (Switzerland) Type: Picomax 56 TOP Machine No.: 14212322 Year of manufacture: 2012 Control system: Heidenhain 620 Axes: 3 Travel distances X: 500 mm Dodpfx Aozia H Tekksuw Y: 400 mm Z: 400 mm Tool changer: 30 positions Spindle speed: 12,000 rpm Drive power: 100% ED / 40% ED 7.1 kW / 9.5 kW Weight approx.: 3300 kg - Heidenhain measuring probe - Heidenhain tool measuring probe - Various tool holders - Like new condition - Program runtime: 1980 hours Errors and prior sale excepted.

Condition: used, Year of construction: 1985, This Chiron CNC vertical machining center, type: FZ16L CN, will be auctioned off online in our industrial auction / machine auction by Kusch+Co GmbH – including painting booths, milling and drilling machines, industrial sewing machines, grinding machines, and workshop and office equipment. Djdpszfid Hefx Akkjuw You can find this and many other items on our platform.

Condition: used, Year of construction: 2002, x-travel 500 mm y-travel 500 mm z-travel 500 mm weight of the machine ca. 3800 kg Duodpfx Aozgimkekkow

Condition: used, Year of construction: 2001, machine/vehicle number: 010614780, Serial No. 010614780, travel range X/Y/Z/B/C 680 x 400 x 625 mm +65 - -110 x 360 °, 2 pallet tables, workpiece clamping device, bridge, swiveling, 40-position pallet storage, workpiece setup station, control system, manufacturer: Fanuc, type 16i-M, chip conveyor, manufacturer: Mosnic, 240-position tool changer, coolant system, chip container, setup station, control system, manufacturer: Fanuc, type 16i-M, chip conveyor, manufacturer: Mosnic, chip tank, 240-position pallet changer, coolant system, chip container. Duodpfx Akezgvnhjkew

Condition: used, Year of construction: 1995, x-travel 650 mm y-travel 410 mm z-travel 410 mm Control Mitsubishi Meldas 50 M max. turning speeds 6.000 min/-1 tool taper SK 40 In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as Dsdpfxox Iwg Ro Akkeuw prior sale!

Condition: good (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 17405, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, nominal power (apparent): 36 kVA, controller manufacturer: MATSUURA, controller model: G-TECH 840 DI, total height: 3,500 mm, total length: 6,000 mm, total width: 5,000 mm, overall weight: 15,000 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 240, mount diameter: 40 mm, tool length: 300 mm, tool diameter: 80 mm, tool weight: 10,000 g, input voltage: 415 V, input frequency: 50 Hz, input current: 50 A, Equipment: chip conveyor, MATSUURA MAM 72-25 V CNC Universal Machining Center - Tool holder: SK 40 - B-axis travel: -110°/+110° - C-axis travel: 360° - Distance between pallet surface and spindle reference line: -20 to 430 mm - Distance between B-axis center and spindle reference line: 4 - 410 mm Dusdpfx Aey I Sfhekkew - Distance between B-axis center and spindle reference line: -10 mm - Distance between pallet center line and bed 0-point: 265 mm - Distance between pallet center line and Y 0-point: 180 mm - Internal diameter of the spindle bearing: 70 mm - Tool clamping force: 7.0 kN - Feed rate B-axis: 30/min - Feed rate C-axis: 50/min - Max. tool diameter: 80 mm, with free secondary stations: 150 mm The machine is equipped with a chip conveyor and a coolant system. Note: includes the tool holders located on the tool changer! Note: the machine can be transported on a truck up to 2700 mm wide! Note: the item must be picked up between August 24 and August 27, 2026, on a date to be determined. FCA D-61352 Bad Homburg - loaded onto a truck.

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, table width: 700 mm, table length: 500 mm, No minimum price – guaranteed sale to the highest bidder! Machining center with a manually rotatable and swiveling machine table! TECHNICAL DETAILS Travel ranges x-axis: 500 mm y-axis: 400 mm z-axis: 400 mm Table Table surface: 700 x 500 mm Spindle Tool holder: 40 SK/ISO Spindle speeds: 20 - 4,500 rpm Spindle drive: 12 kW Feed rates Feed rates: 5,000 mm/min Control system: Heidenhain TNC 124 MACHINE DETAILS Total power requirement: 13 kW Machine weight: approx. 2,800 kg Dodpfxszb Uz De Akkouw Space requirement: approx. 3 x 2 x 2 m

Condition: used, Year of construction: 2009, functionality: fully functional, Vertical Machining Center Dujdpeyuvivofx Akkow Type No: TMV720A Working Area (L × W) 800 mm × 480 mm (31.5" × 18.9") Travels X Travel: 480 mm (12.2") Y Travel: 530 mm (20.8") Z Travel: MAX 630 mm (24.8") Distance Between Spindle Table Top: MIN 100 mm (3.9") Max Table Load 500 kg (1100 LBS) Table Height 900 mm (35.43") Rapid Traverse (X/Y/Z) 48 / 48 / 48 m/min Servo Motor X: 1.8 kW Y: 1.8 kW Z: 2.5 kW Spindle Spindle Nose: BT No.40 Spindle Speed: 8000 – 10000 RPM Spindle Motor: 5.5 / 7.5 kW Coolant Motor 0.55 kW (0.75 HP) Tool Selection Random Tool Capacity 24 (MAX) Max Tool Diameter 80 mm (3.14") Max Tool Dia × Length 250 mm (9.84") Max Tool Weight 7 kg Tool Holder BT40 Machine Height 2580 mm Net Weight 3800 kg Floor Space (L × W) 2000 mm × 2380 mm Machine Precision Position: 0.01 mm / full travel Dependable Degree: ±0.005 mm

Condition: used, Year of construction: 2001, x-travel 600 mm y-travel 700 mm z-travel 600 mm Control Heidenhain Millplus Duedpfx Aszdvglekkjw weight of the machine ca. 9 t

Condition: excellent (used), Working travels 510 x 360 x 300 mm Table size 600 x 360 mm Spindle taper BT30 Spindle speeds -12'000 rpm Tool changer 20 Pos. Dujdpfxouy S Hbo Akksw Control FANUC 18i-MB Coolant through spindle misc. accessories MARCELS MASCHINEN CH

Condition: used, Year of construction: 2015, CNC machining center Manufacturer: Chiron Type: FZ 12 W Magnum Year of manufacture: 2015 CNC control: Siemens 840D solution line Travel distances: X/Y/Z = 550 x 400 x 360 mm Spindle speed: 15,000 rpm Tool interface: HSK63 Internal coolant system Rotary table Integrated workpiece changer 32-tool capacity Djdpfx Akezfppcoksuw Glass scales Chip conveyor Laser control for breakage monitoring 2726

Condition: excellent (used), Year of construction: 1998, Control system: Fanuc OM Travel ranges X/Y/Z: 450 x 300 x 400 mm Table size: 600 x 300 mm Spindle speed: 8,000 rpm Tool magazine for 16 tools, SK 30. Dusdezfx Syepfx Akkew

Condition: ready for operation (used), Year of construction: 1998, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 630 mm, controller manufacturer: SIEMENS, table width: 850 mm, table length: 1,250 mm, overall weight: 8,000 kg, spindle speed (max.): 10,500 rpm, number of slots in tool magazine: 24, number of axes: 3, This 3-axis CHIRON DZ 18 W MAGNUM was manufactured in 1998. It features an X-axis travel of 400 mm, Y-axis travel of 400 mm, and Z-axis travel of 630 mm. The machine includes a table size of 1250 × 850 mm and a tool magazine capacity of 24 tools. If you are looking to get high-quality machining capabilities, consider the CHIRON DZ 18 W MAGNUM vertical machining centre we have for sale. Contact us for further details. Dujdpfxezcyh Eo Akkew - Control System: Siemens CNC- Spindle Taper/Chuck: SK40- Spindle Speed Range: 320 – 10,500 rpm- Tool Magazine Capacity: 2 × 12 slots (24 tools total)- Tool Change Time: approx. 1.9 s- Chip-to-Chip Time: approx. 3.9 s- Retrofit/Overhaul Date: 2021 - Complete modernization: • main spindles overhauled • ball screws replaced • tool changer overhauled, • axis systems/guides/bearings overhauled • hydraulic/pneumatic systems updated • electrical system and cabling modernized • safety elements replaced • geometry adjusted- Cooling System: Internal cooling (IKZ) via Knoll paper band filter and high-pressure unit (Unit Number: 646)- Chip Management: Integrated chip conveyor and swarf bin- Workholding: Hydraulic workpiece clamping on a 180-degree workpiece changing table (W-axis)- Additional Features: Prepared for 4th/5th axis integration, attached cabinet climate control unit

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, operating hours: 5,560 h, Equipment: chip conveyor, CNC controller: SIEMENS 828D OP Axes X-axis travel mm: 550 Y-axis travel mm: 550 Z-axis travel mm: 510 Rapid traverse m/min: 24 Worktable Table dimensions mm: 850x650 Max. workpiece weight kg: 600 Spindle Spindle speed rpm: 12.000 Spindle drive power kW: 13/9 (40/100% ED) Spindle torque Nm: 83/57 (40/100% ED) Cooling Cooling through the Spindle Center bar: 20 Tool system Tool holder: SK40 Tool magazine slots: 24 Max. Tool Diameter With free neighboring places mm: ø130 With occupied neighboring places mm: ø80 Max. Tool Length mm: 300 Max tool weight kg: 8 Equipment Electronic Handwheel Chip conveyor Mist collector Coolant gun RENISHAW Measuring probe Rated power kVA: 20 Basic machine dimensions / weight Length mm: 3.070 Width mm: 2.670 Dedpeu Tk Hdofx Akkeuw Height mm: 2.840 Weight kg: 5.600

Condition: good (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 300 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, workpiece weight (max.): 1 kg, number of slots in tool magazine: 12, controller manufacturer: Fanuc, controller model: FANUC 21-iM, coolant supply: 1 bar, number of spindles: 1, rapid traverse Z-axis: 60 m/min, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rotational speed (max.): 10,000 rpm, workpiece diameter (max.): 63 mm, Equipment: documentation/manual, rotational speed infinitely variable, 4 units of CHIRON FZ08S with 4th axis Peiseler AWU P100 1 unit of CHIRON FZ08S 3-axis 3 machines were overhauled by Chiron CMS in 2016, and 4 machines in 2018. Unit price approximately €30,000. Dodevx Ugwopfx Akkeuw

Condition: used, Year of construction: 2015, functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 480 mm, controller manufacturer: siemens, controller model: 840 DSL, rotational speed (max.): 18,000 rpm, Equipment: chip conveyor, 6 axis milling & turning center yom 2015 with control Siemens 840 DSL in perfect conditions Dujdpfjh Elngox Akkew