Used CNC turning and milling centers for sale (597)

Condition: ready for operation (used), Year of construction: 2005, operating hours: 60,683 h, functionality: fully functional, turning length: 1,524 mm, turning diameter: 820 mm, spindle speed (max.): 3,300 rpm, rapid traverse X-axis: 40 m/min, milling spindle speed (max.): 10,000 rpm, The following work was carried out on the machine: Repair/overhaul of the gearbox of the B-axis (2025) Complete maintenance (2025) Motor magazine renewed (2025) Replacement of the linear guides of the X and Y axes (2024) Renewal of the ball screws of the X and Y axes (2024) Repair of the milling spindle (2024) Including approximately 120 tools, SK 50 TECHNICAL DETAILS Turning length: 1,524 mm Turning diameter: 820 mm Travel range, X-axis: 870 mm Travel range, Y-axis: 500 mm Travel range, Z-axis: 1,598 mm Main spindle Spindle speed (max.): 3,300 rpm Drive power of main spindle: 30 kW / 22 kW Max. torque of main spindle: 588 Nm Spindle nose of main spindle: A2-11" Spindle bore: 104 mm Indexing: 0.0001 Counter spindle Spindle speed (max.): 3,300 rpm Drive power of counter spindle: 30 kW / 22 kW Max. torque of counter spindle: 588 Nm Spindle nose of counter spindle: A2-11" Indexing: 0.0001 Milling spindle Drive power of milling spindle: 37 kW Max. torque of milling spindle: 260 Nm Milling spindle speed range: 0-10,000 rpm Rapid traverse, X-axis: 40 m/min Rapid traverse, Y-axis: 40 m/min Rapid traverse, Z-axis: 40 m/min MACHINE DETAILS Control system: Mazatrol 640M PRO Tool holder: SK50 Number of tool positions: 120 Redpfx Aszcwylja Rjw Operating voltage: 400 V / 50 Hz Connected load: 104 kVA Required installation area (L x W): 7 x 3.5 m Operating hours: 60,683 h EQUIPMENT Approx. 120 tools, SK 50 Variable speed adjustment Tool magazine, 120 positions High-pressure coolant, 70 bar Renishaw probe (new in 2025) Laser measuring system for rotating tools Interface set Air/water cooling through the spindle Overload monitoring system Chip conveyor, Mayfran Consep 2000 Quick-change tool holder, SMW

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, turning diameter: 460 mm, spindle speed (max.): 3,500 rpm, spindle bore: 86 mm, bar passage: 78 mm, controller model: Fanuc 32iTB iHMI, center width: 689 mm, CMZ turning and milling center including GL20II gantry loader! TECHNICAL DETAILS Turning diameter over bed: 760 mm Turning diameter over cross slide: 600 mm Maximum turning diameter: 460 mm Distance between centers: 689 mm Travel distance tailstock: 640 mm Travel distance X-axis: 310 mm Travel distance Z-axis: 640 mm Travel distance Y-axis: +70/-50 mm Travel distance B-axis: 640 mm Rapid traverse rates: 30/30/15/30 m/min Spindle speed max.: 3,500 rpm ASA 8" A2 Spindle bearing outer diameter: 200 mm Spindle bearing inner diameter: 130 mm Spindle bore: 86 mm Bar passage: 78 mm Number of tool stations: 12, all driven, 12,000 rpm Tool holder: 25x25 (50) Rjdpfx Aszdrzxea Row MACHINE DETAILS Operating hours: 43,712 h Total operating hours: approx. 35,000 h Control system: Fanuc 32iTB iHMI Dimensions & Weight Machine dimensions (L x W x H): 2,542 x 1,760 x 1,880 mm Machine weight: 6,500 kg EQUIPMENT Gantry loader

Condition: ready for operation (used), Year of construction: 2010, operating hours: 5,002 h, functionality: fully functional, machine/vehicle number: NT100JG0126, turning length: 424 mm, turning diameter: 370 mm, travel distance X-axis: 380 mm, bar passage: 52 mm, controller model: FANUC FS-31iA5 (MAPPS 4), TECHNICAL DETAILS Turning length: 424 mm Maximum turning diameter: 370 mm (270 mm with turret 2) Bar capacity: 52 mm Turning-milling spindle Full indexing capabilities: Yes X-axis travel: 380 mm Y-axis travel: ± 105 mm Z-axis travel: 460 + 155 mm (ATC) B-axis: ± 120º Spindle speed: 12,000 rpm Drive power: 9/5.5 kW Tool magazine Number of magazine positions: 38 Tool holder: Capto C5 Maximum tool length: 250 mm (210 mm for tools under Ø70 mm) Maximum tool diameter: 70 mm / Ø130 mm (with/without adjacent tools) Maximum tool weight: 5 kg Lower turret X-axis travel: 155 mm Z-axis travel: 610 mm Number of tool slots: 10 Tool speed: 6,000 rpm Drive power for driven tools: 1.5/1.2 kW Main spindle Spindle speed: 6,000 rpm Drive power: 11/7.5 kW Spindle bore: 73 mm Chuck type: Hollow chuck (8") Manufacturer: KITAGAWA Spindle nose: JIS A2-5 Maximum torque: 223 Nm Counter spindle Spindle speed: 1,000 rpm B-axis: 4 fixed positions, 0º, -30º, -180º (-225º for overhang onto conveyor, if available) MACHINE DETAILS Control: FANUC FS-31iA5 (MAPPS 4) Potential rated power: 39.24 kVA Redpfx Ajzf H Ezoa Rjw Dimensions & Weight Dimensions (L x W x H): 2,705 x 2,425 x 2,385 mm Weight: 8,800 kg Operating Hours Power on: 54,061 h Spindle 1 operating hours: 9,813 h Spindle 2 operating hours: 5,002 h EQUIPMENT Chip conveyor Signal lamp High-pressure pump Air blow nozzle outside the spindle Foot switch (dual) for main and counter spindle

Condition: excellent (used), Mazak Quickturn Nexus 300 CNC Lathe Capacity Maximum bar size diameter - 77mm Maximum cutting dia - 420mm Maximum swing - 680mm Spindle Main spindle speed : Max 4,000rpm / Min 35rpm Main spindle workpiece weight ( including chuck) 450kg Spindle bore - 88mm Spindle centre line - 1080mm Spinel nose - A2-8 Axis Travel X axis 225mm Z axis 680mm Cutting feedrates (x axis max) 8m/min (z axis max ) 8m/min Rapid traverse Rjdpfjzh Ndxsx Aa Row X axis (max) 30m/min Z axis (max) 25m/min Turret Toolsize turning tool shank - 25 x 25 Turret indexing time 1/2 full turn 0.8 secs single step 0.2 secs No of stations on drum turret 12 Tailstock (not chucker) Body movement motor driven Body stroke 645mm Mounting taper No5 Standard centre supplied No5 Chucking systems Chuck cylinder S2078-15Y Chuck Type B210A815X Jaw stroke on diameter 8.8mm Main chuck diameter 10" Mazatrol PC Fusion CNC 640T Nexus CNC Control

Condition: good (used), Year of construction: 2001, VICTOR V TURN 36 HYD 3 JAW CHUCK TAILSTOCK 2 AXIS Rodpfxszhwufs Aa Rsw 750 CENTRES SWARF CONVEYOR YEAR 2001

Condition: used, XYZ SMX 2000, Year 2017, from research and development facility, tooling and vices in images not included. Prot Trak SMX Control Rjdpfxsx Saulo Aa Row

Condition: good (used), Year of construction: 2011, Maximum machining diameter 42mm, maximum machining length 175mm, spindle power 7.5/5.5Kw , spindle speed 5,000rpm, 8 station turret, Rodszg Egmjpfx Aa Row milling speed 5,000rpm, Fanuc OI-TD control, 3 jaw chuck, parts catcher.

Condition: excellent (used), Year of construction: 2019, Swing 806mm, Swing over cross slide 527mm, maximum cutting diameter 457mm, 762mm between centres, 584mm maximum cutting length, 0.01 degree C axis, 3000rpm Milling 3.7kW, +/- 50mm Y axis, 76mm Bar capacity, 22.4kW Spindle Motor, 3400rpm spindle, 24m/minute rapid feedrate, Rsdpfszg Efisx Aa Row 24 Station turret, swarf conveyor, tailstock, tool setter, coolant,

Condition: used, Year of construction: 2004, Mazak Integrex E-650H x 2000 CNC Multi-Tasking CNC Lathe. S/No. 168658 (2004) with Mazatrol Fusion 640MT Pro Control, Max Swing 920mm, Spindle Motor 45kW, Rotary Spindle Motor 37 kW, Max Spindle Speed 1600rpm, Spindle Bore 260mm Dia, X/Y/Z Travels 1025/650/2106mm, B-Axis -30deg/+210deg, C-Axis 360deg, Rapids X/Y/Z 40/40/40m/min, Max Rotary Tool Spindle Speed 10,000rpm, Tailstock Travel 1858mm, Tailstock Quill Stroke 160mm, Tailstock Centre MT6, Automatic 80 Position Toolchanger, Spindle Taper Capto C8, Cromar Swarf Conveyor. Country of Origin: Japan Please Note: There are no loading facilities on site, dismantling and loading will be at the cost of the purchaser. Rodpfszhmt Dsx Aa Row Location: This lots is located in Birmingham, UK. Please see individual lot for loading information and charges. All/Any tooling is being offered as specifically described.

Condition: used, Nakamura - Tome TMC - 15 CNC Lathe with Nakamura - Tome Fanuc CNC Control, 16 Position Tool Turrret, LNS 6.42HS = 4.8 Barfeeder. S/No. 34545, Capacity Round Collet 34mm, Chuck Diameter 165mm, Swing Over Bed 300mm, Swing Over Saddle 170mm, Max Turning Diameter 180mm, Max Turning Length 250mm, Spindle Speed 135 - 4500rpm, Spindle Nose A2 - 5. S/No. 01908 Rjdpfx Aezgfvnja Rjw Location: This lot is located in Burton-on-Trent. A charge of £300 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: used, Hardinge KL-1 Super Precision Lathe with Anilam Mini Wizard 2 Axis DRO, 5C Collet Chuck. S/No. KL1 - 2158 Location: This lot is located in Burton-on-Trent. A charge of £100 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. Rjdjzgfp Iepfx Aa Rew

Condition: used, Hardinge Conquest GT Super Precision CNC Platten Lathe with GE Fanuc 18TB CNC Control, Filtermist F7 Oil Mist Filter Extractor, Hours 37637. S/No. GTA - 959 - B Rodpfszgfmmox Aa Rsw Location: This lot is located in Burton-on-Trent. A charge of £300 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: used, Nakamura - Tome TMC - 15 CNC Lathe with Nakamura - Tome Fanuc CNC Control, 16 Position Tool Turrret, LNS 6.42HS = 4.8 Barfeeder. S/No. 34545, Capacity Round Collet 34mm, Chuck Diameter 165mm, Swing Over Bed 300mm, Swing Over Saddle 170mm, Max Turning Diameter 180mm, Max Turning Length 250mm, Spindle Speed 135 - 4500rpm, Spindle Nose A2 - 5. S/No. E01804 Rodpfx Aaezgfk Eo Rsw Location: This lot is located in Burton-on-Trent. A charge of £350 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: used, Year of construction: 2002, DMG Gildemeister CTX310 CNC Lathe with GE Fanuc Series 21i-T CNC Control, 12 Position Tool Turret, Collet Chuck, Hydrafeed Barfeed. S/No. 4662 (2002) Hours 39693 & 14215. S/No. 938205 (2002) Rjdpfx Aaszgfi Ij Rjw Location: This lot is located in Burton-on-Trent. A charge of £350 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: used, Year of construction: 2002, DMG Gildemeister CTX310 CNC Lathe with GE Fanuc Series 21i-T CNC Control, 12 Position Tool Turret, Collet Chuck, Hydrafeed Multifeed 3 - 80N Barfeeder. S/No. 4661 (2002), Filtermist FX3000 Oil Mist Filter, Hours 40691& 16285 (2002) Rodpezgfhqefx Aa Rjw Location: This lot is located in Burton-on-Trent. A charge of £350 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: excellent (used), Year of construction: 2020, 2020 Vulcan TC250M CNC Turn/Mill Slant Bed Lathe With Fanuc Series Oi-TF Plus Control Rodozfqflopfx Aa Rsw Auto Strong N-210 Ø250mm 3 Jaw Power Chucks. Swing Over Bed Ø600mm. Maximum Turning Ø316mm. Working Length 435mm. Spindle Bore Ø77mm. Bar Capacity Ø65mm. Axis Travel 'X'=185mm, 'Z'=490mm. Rapid Traverse 'X'=30m/min, 'Z'=30m/min. Cutting Feed Rate 0.001-500mm/rev. Speed Range 25-3,000rpm (11/15kW Motor). Spindle Nose A2-6. Driven Tool Speed Range 25-4,000rpm. Sauter 12 Position Turret, Turning Tool Shank 25 x 25mm. Internal Turning Tool Shank Ø40mm. Tailstock Travel 380mm, Quill Ø75mm, Quill Stroke 85mm, MT4 Taper. Run Hours 2,139. S/No. 25S1001 (2020). NOTE: This item will be loaded to buyer's vehicle, a loading charge of £250 + VAT will be added to the buyer's invoice. With Coolant System (190L Tank), Chip Conveyor, Filtermist S800 Mist Extraction Unit, Programmable Tailstock, Parts Catcher, Tool Setting Arm, Quantity Of Assorted Driven Tool Unit, Turning Tool Holders, Foot Switch, Signal Tower & Manuals. Overall Dimensions L3,160 x W1,805 x H1,935mm. Approx Weight 5,000kg. NOTE: This item will be loaded to buyer's vehicle, a loading charge of £250 + VAT will be added to the buyer's invoice.

Condition: excellent (used), Year of construction: 2017, Maximum turning diameter 300mm, maximum turning length 510mm, Rjdpfx Aezcy S Roa Rjw spindle speed 6,000rpm, milling speed 6,000rpm, sub-spindle speed 6,000rpm, main spindle bar capacity 42mm, 2 X 12 station turrets, spindle power 11Kw, Y axis + /- 32mm, swarf conveyor, coolant., Fanuc OI-TF. barfeed unit.

Condition: good (used), Year of construction: 2015, Maximum turning diameter 255mm, distance between collet chucks 639mm, swing over bed 270mm, spindle speed 4,000rpm, milling speed 6,000rpm, sub-spindle speed 5,000rpm, main spindle bar capacity 66mm, Rjdpfx Aajzcy Ils Rew sub spindle bar capacity 52mm, 3 X 12 station turrets, spindle power 15Kw, Y axis + /- 40mm, swarf conveyor, coolant., Fanuc 31i.

Condition: used, Year of construction: 2004, Doosan Mecatec S550LM Slant Bed CNC Lathe with Fanuc Series 21i – TB CNC Control, Swing Over Bed 710, Distance between both Centres 1230mm, Max Turning Diameter 480mm, Max Turning Length 1130mm, Spindle Speeds 30 – 2500rpm, 12 Tools VDI40 Turret, X Axis Travel 300mm, Z Axis Travel 1150mm, Live Driven Tools, C Axis, Machine Weight 8000kg. S/No. LNY – 1008 (2004). Country of Origin: Korea Location: This lot is located in Birmingham, UK. A charge of £550 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. Rodpjzdthmjfx Aa Rew

Condition: used, Year of construction: 2000, Hardinge VMC 600 II CNC Vertical Machining Centre with Fanuc Series O-MD CNC Control, Table Size 750mm x 500mm, 20 Tool ATC, BT40 Spindle Taper, Manuals & BT40 Spindle Tools. S/No. NVAAOF0060 (2000) Location: This lot is located in Burton on Trent, UK. A charge of £300 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. Rsdpfx Aaozdtkhs Row

Condition: good (used), Year of construction: 2012, maximum machining diameter 380mm, maximum machining length 508mm, bar capacity 74mm, spindle speed 4,000rpm, spindle power 18.5Kw, milling speed 4,500rpm, milling power10Kw, sub-spindle speed 6,000rpm, sub-spindle power 5.5Kw, Y axis -51/+51mm, 12 station turret, Rsdozaz Uzopfx Aa Rsw Mazatrol Matrix Nexus control, swarf conveyor, parts catcher , tool setter, 3 jaw chuck and Barfeed unit.

Condition: used, Year of construction: 2010, greates pass round over bed 700 mm swing diameter over slide rest 380 mm max. turning diameter 410 mm control HEIDENHAIN - 4290 max. Spindle speed 5.000 U/min. centre distance 975 mm travel -x axis 300 mm travel -y axis 120 (+/- 60) mm travel -z axis 850 mm numbers of positions in the tool changer 12 tool taper VDI40 CNC Turning- and Milling Center | DMG - CTX 800 Beta equipped with a turret for driven tools, SCHUNK lathe chuck (Ø 315 mm) as well as tailstock and chip conveyor. An extensive tool package is in the Scope of delivery includes. The machine is in a well-maintained condition. Rodpfxszhpags Aa Rjw - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: CTX800beta | CTX800 beta | CTX-800

Condition: ready for operation (used), Year of construction: 1997, turning length: 410 mm, turning diameter: 516 mm, spindle speed (max.): 4,500 rpm, bar diameter (max.): 51 mm, CNC MSC 803 Rjdpfozh Uu Aex Aa Rjw 10-position turret Maximum spindle speed: 4500 RPM Spindle bore: 51 mm Maximum diameter swing: 516 mm Set of collets and chuck

Condition: good (used), Year of construction: 2007, operating hours: 88,040 h, functionality: fully functional, machine/vehicle number: 07400003691, turning diameter: 120 mm, spindle bore: 118 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 30 m/min, total height: 2,500 mm, total length: 5,500 mm, total width: 2,500 mm, overall weight: 11,000 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 840 D POWERLINE, DMG GILDEMEISTER TWIN 102 CNC Turning and Milling Center - Recorded spindle hours: 43,558 - Spindle speed range: 3,200/5,000 rpm - Swing diameter: 270 mm - Spindle distance: 900 mm - X1 axis travel: 290 mm - Z1 axis travel: 650 mm - X2 axis travel: 180 mm - Z2 axis travel: 650 mm Rsdpfx Aaeyaqgye Row - Y1 axis travel: ±40 mm - Z3 axis travel: 670 mm - X3 axis travel: 175 mm - Max. bar diameter: 100/104 mm - Number of driven tools per tool turret: 12 - Including chip conveyor, with 2 tool turrets (each with 12 tool stations), main and counter spindles, as well as foot switches Attention, the machine has the following defects: - The B-axis is defective (mounted on turret 1) - Guideways and drives show age-related wear - X2 axis (guide rails) runs slightly out of alignment by approximately 0.03 mm (should be re-measured) - Occasionally, axis reference value setting in the control system fails - The hydraulic pump was replaced after a failure and is now installed externally as a standalone unit FCA D-58256 Ennepetal, loaded on truck at a mutually agreed date at the end of February 2026.

Condition: ready for operation (used), Year of construction: 2017, operating hours: 67 h, spindle motor power: 22,000 W, spindle speed (max.): 3,300 rpm, travel distance X-axis: 615 mm, travel distance Y-axis: 260 mm, travel distance Z-axis: 1,585 mm, overall weight: 16,600 kg, controller manufacturer: MAZATROL, number of axes: 5, This 5-axis Mazak INTEGREX i-200 S was manufactured in 2017. It features full 5-axis simultaneous machining, a maximum machining diameter of Ø658 mm, and a maximum machining length of 1519 mm. The machine includes a robust tool magazine capacity of 72 positions and is equipped with both main and second spindles for enhanced capabilities. If you are looking to get high-quality turning and milling capabilities, consider the Mazak INTEGREX i-200 S turn-mill centre. Contact us for further details. • Operating time: Approx. 68 hours • Availability: Immediate • Key capabilities: • Full 5‑axis simultaneous machining • Main spindle + second spindle • Milling spindle with automatic tool changer • Complete turning and milling in one setup • Capacity and working range • Max swing: Ø658 mm • Swing over cross slide: Ø658 mm • Max machining diameter: Ø658 mm • Max machining length: 1519 mm • Bar capacity (main spindle): Ø102 mm • Bar capacity (second spindle): Ø65 mm • Max support mass (main spindle): 650 kg • Max support mass (second spindle): 300 kg • Main spindle (HD1) • Chuck size: 12" • Spindle bore: Ø112 mm • Motor output: 22 / 18.5 kW • Torque: 883.3 / 716.2 Nm • Acceleration time: 4.9 s • Air blow system: Included • Additional configuration: Heavy‑duty HD1 spindle; removal of standard spindle cylinder and chuck • Second spindle (HD2) • Chuck size: 8" • Max speed: 5,000 rpm Rodoy Sltgepfx Aa Rew • Spindle bore: Ø76 mm • Motor output: 18.5 / 15 kW • Torque: 325 / 238 Nm • Acceleration time: 4.5 s • Factory option: HD2 spindle synchronization function • Milling spindle • Max speed: 12,000 rpm • Motor output: 24 kW • Cooling: Oil & air • Tool interface: HSK‑A63 (T63) • 90° indexing time: 0.5 s • Acceleration: 1.27 s • Lubrication: Oil & air • Tool capacity: • O.D. turning tools: □25 mm • I.D. turning tools: Ø40 mm • Milling tools: Max Ø125 × 400 mm • Axis travels • W: 1574 mm • Rapid traverse: X/Z 50 m/min; Y 40 m/min; W 30 m/min • Tool system and magazine • Tool system: CAPTO C6 • Tool magazine capacity: 72 positions • Automatic tool changer: Included • Functions: Tool breakage detection in magazine; Overload detection • CNC functions and software • 5‑axis machining function package • Tool radius compensation for 5‑axis • Cylindrical interpolation • Polar coordinate interpolation • Synchronous tapping with milling spindle • Cooling and preparation • Through‑tool coolant: 7 MPa • Preparation for oil mist extraction system • Highlights • Practically new condition with only ~68 operating hours • Very rich factory configuration • Full 5‑axis simultaneous machining • Main and sub‑spindle configuration • 72‑tool CAPTO magazine • Production‑ready with significant savings vs. new Additional equipment • Chip and parts handling • Side chip conveyor – Consep type • Belt‑type parts conveyor • Bar feeding and workpiece handling • LNS QLS II bar feeder • Bar feeder interface kit • Automatic parts catcher • Filtration • SEI FILTRATION unit • Series: JT040 • Model: 40/70‑V‑I‑R‑FM • Year: 2018 • Other accessories • Machine mounting anchors • 3‑color machine status signal lamp Technical Specification Counter Spindle Yes Driven Tools No Taper Size Capto C6