Condition: used, Year of construction: 2015, operating hours: 3,600 h, power: 103 kW (140.04 HP), front tire size: 420/85R30, rear tire size: 650/65R38, Speed: 40, First registered: 03.02.2015, / Compressed air system (2-circuit), three-point / / Rear linkage, lifting roof, / Rotating beacon / _____ / 01A2L 1 6140R All-wheel tractor / Germany / 1002 Pgjdeqrrn Sjpfx Ad Nsg

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2024, operating hours: 1 h, working width: 4,800 mm, color: green, empty load weight: 3,000 kg, operation weight: 3,000 kg, machine/vehicle number: S241480, Equipment: hydraulic folding, lighting, Spearhead Multicut 480 Military Demo machine, year of manufacture 2024 Machine designed for grassland maintenance. However, it can also be used on other surfaces, such as fallow land, maize and rapeseed stubble, etc. Extra heavy-duty military specification. Required power – depending on crop density – ranges between 100 and 200 hp (73 – 147 kW). The Power Drive transmission system is rated for continuous power of up to 225 hp (165 kW). The combination of the unique cutting system with MultiCut blades and rotor ensures a very clean cut and optimal distribution of the cut material. MODEL: MULTICUT 480 Military Working width: 4.60 m Transport width: 2.80 m Length: 4.50 m Podpfjx R Uuwex Ad Negg Minimum power requirement: 100 hp (73 kW) Drive system: Power Drive Maximum load: 225 hp (165 kW) Capacity: 3-6 ha/h Number of rotors/blades: 3/18 MultiCut Slip clutch: 3 units, four-disc clutches Blade speed: approx. 80 m/sec Rotor overlap: 150 mm Operating angle: +90° / -20° Cutting height range: 25-400 mm Wheels: 8 units, 6.00 x 9 Support skids: 4 units Number of supporting discs: 3 units Parallel height adjustment: standard Deck protection ring/guide plate: standard Lighting: standard Tandem axle centre section: standard GAS SPRUNG FOR TRANSPORT 7-YEAR WARRANTY ON TRANSMISSION

Condition: new, functionality: fully functional, Year of construction: 2025, working width: 5,000 mm, color: black, Equipment: lighting, Boom mower for tractors with a power output from 33 kW (45 hp), category II three-point linkage, and a minimum weight of 2100 kg. Driven via PTO shaft at 540 rpm. - Maximum horizontal reach: 5.00 m - Tractor-independent hydraulic system (46 l/min, 210 bar) incl. PTO shaft - Hydraulic collision protection Pedpfxjx R Ul Ne Ad Nsgg - Hydraulic boom rotation - Floating position for boom - Floating position for mower rotor - Stabilization kit for three-point linkage - Electric proportional control with single joystick NEW machine, year of manufacture 2025

Year of construction: 2022, condition: as good as new (ex-display), Can be attached to wheel loaders and various implement carriers as well as McConnel Robocut or other tracked mowers Standard with hydraulic swivelling device via 2 heavy hydraulic cylinders (constant speed in both directions) Controlled via remote control of the carrier vehicle HEAVY-DUTY piston motor with freewheel and pressure relief valve for safe milling at the load limit Pgodpfx Adokvnawe Nsg Hydraulic motor optimally matched to the milling unit Large swivel range enables wide-ranging work without awkward manoeuvring Flexible working even in areas difficult to access HARDOX milling wheel ergonomically shaped for a large cutting depth Maintenance-friendly design Hydraulic hoses as standard Hydraulic requirements: 1x supply line, 1x pressure-free return line, 1x pressure-free leakage oil line to tank

Condition: new, functionality: fully functional, Year of construction: 2024, working width: 73,000 mm, color: green, machine/vehicle number: S241645, Equipment: hydraulic folding, lighting, SPEARHEAD 730 STUBBLEMASTER Trailed Rotary Mower Pgodpfx Adoxlf N So Nog If you need to work more hectares, opt for a machine with a 7.3-meter working width. The 730 features the same special design as the 500, complete with a powerful 165 hp (123 kW) transmission. Larger farmers and contractors appreciate the five rotors. Each rotor is equipped with three straight and three angled blades, delivering the renowned double cut of the Stubble Master. This accelerates residue breakdown and improves soil structure. The monocoque deck design prevents dirt buildup, while the adjustable cutting height allows mowing just a few centimeters above the ground. Five rotors cover 7.3 meters in a single pass. Easy to clean thanks to the monocoque design. Precisely set your cutting height for maximum performance.

Condition: new, functionality: fully functional, Year of construction: 2025, maximum speed: 7 km/h, color: yellow, overall weight: 1,500 kg, Equipment: lighting, onboard computer, McCONNEL ROBOCUT T500 DEMONSTRATION UNIT - Remote-controlled embankment mower. - Low weight, low center of gravity located in the middle of the vehicle. Pedpfx Adju Ruruj Nogg - Active track drive with 4 movable lower rollers and 1 upper roller. - Hardened gears on the drive side. - Front track guidance with guide blocks. - External rubber tracks: 250 mm wide. - Rubber tracks with deep grooves, A/S tread profile. - Hydraulic track tensioning via grease gun with pressure gauge. - Removable belly plate. - 3-cylinder Perkins diesel engine, 37 kW / 50 HP. - Basic machine weight (without attachments): 1250 kg - Fuel tank: 21 liters. - Oil tank: 18 liters – 28 liters total in the circuit. - 8 liters SAE J 1036 (or equivalent) coolant in the machine. - 2-speed fully hydrostatic, stepless drive. - Travel speeds: 0 – 4 km/h and 0 – 7 km/h. - 5-position cutting height adjustment. - Hydraulic lift: -300 mm to +400 mm. - Flail rotor float function left/right 14 degrees. - Engine permanently mounted; cannot be rotated. - Oversized oil sump. - Engine approved for use on slopes up to 55 degrees. - Modified lubrication system for incline applications. - Electronics mounted separately from engine (no vibration impact). - Cooling system mounted completely at the rear, away from dust and debris. - Combined cooling system: engine radiator and oil cooler integrated. - Standard spiral fan, operable via remote control. - Lamellae rotation via hydraulics. - Standard machine-mounted safety features with alarm functions: - Shut off if no oil pressure in the engine. - Emergency stop function if controls are not operational. - Blocked filter indicator. - Overheat warning for engine temperature. - Oil and diesel fluid indicator. - The machine is equipped with an emergency control system in case either the unit or the radio remote does not function. - Brake system on track drive motors; machine is braked when not in operation. - Low ground pressure. - VARIOUS ATTACHMENTS AVAILABLE SUCH AS GRASS FLAIL, STUMP GRINDER, FORESTRY ROTOR ETC. - STATED PRICE IS FOR BASE UNIT WITHOUT ATTACHMENTS.

Condition: new, Year of construction: 2021, Equipment: hydraulic folding, The McConnel barrier mower is a hydraulic driven mowing machine, with an independent PTO operated system. The equipment can be attached to the tractor simply with a 3-point hitch, both front and rear, or DIN plate, and can work on both right and left side by simply reversing the cutting discs. Builted on a sturdy tubular frame with a total weight of 1500 kg, it is equipped with two side arms that open up to overcome road guardrails, steel cables and hedges of a maximum height of 170 cm, and is able to cut simultaneously from both sides and underneath the obstacle with a cutting width of about 150 cm. The great versatility and working speed of the machine partly depend on the possibility of opening the external arm 180°, permitting a fast and easy positioning and, most of all, enabling the machine to continue mowing with the internal disc while the external one, by lifting up, can pass over road or advertising signs that may be present along the way, while automatically interrupting the rotation of the blades. Psdpfoh Hurkjx Ad Njgg Energreen Raiber

Condition: new, Year of construction: 2024, empty load weight: 178 kg, Dreipunktstreuer D301 0.3m³ Description: Spreader with three-point linkage (CAT 1) and a single spreading material chamber. The spreading material is conveyed via an auger and distributed by the patented spreading disc unit. Hydraulically driven motors, controlled by Kugelmann hydraulic block. All drives can also be operated manually in the event of control failure. Chain drive ensures high torque when starting the auger. Corrosion-resistant material combination: stainless steel subframe (VA) and plastic spreading material hopper. Support legs can be folded up towards the spreader during operation. Features: - Hydraulically driven single-chamber spreader with auger and spreading disc - Corrosion-resistant combination of stainless steel subframe and plastic hopper - Dimensions (WxDxH): 1080 x 590 x 1200 mm - Unladen weight: 178 kg - Includes apron/splash guard - Includes tarpaulin cover - Includes road lighting (compliant with StVZO) - RAL 2011 signal color - Manual emergency operation - Foldable support legs - Low energy consumption - Operable from an oil flow rate of 15 l/min - Patented spreading disc unit - Manual adjustment of spreading pattern - Winter service marked with reflective white warning film - Can be operated without control unit (via control cabinet key on easily accessible side) - Mounting for CAT 1 Standard Equipment: - Hydraulic drive for auger and spreading disc - Stainless steel (VA) subframe with RAL 2011 signal paint - Stainless steel spreading disc - Plastic spreading hopper - Plastic spreading disc guard - Mesh tarpaulin cover - Apron - LED lighting in accordance with StVZO - Foldable support legs (remain on device during use) - Manual adjustment of spreading pattern - Winter service marking - Operation possible without control unit - All drives are regulated and equipped with manual emergency operation - Hydraulic hoses with SVK couplings for forward and return - Spreader is fully storable (can be set down) Carrier Vehicle Requirements: - min. 20 L/min at reduced spreading output - max. 50 L/min with external oil cooler - Kugelmann system internally rated at 230 bar - Carrier vehicle with mounted spreader must not exceed permissible axle load or gross vehicle weight Optional Equipment: - k-basic 2 control unit - Wiring harness (flying) - Microprocessor control with CAN-BUS technology - Closed loop control of all drives (with feedback) - Functions: > Adjust spreading width > Adjust spreading density > Rotating beacon on/off > Work light on/off > Spreader operating/pause > Illuminated keys and rotary controls > Data recording > Speed simulation Podpfx Adsx S Tpvj Nsgg > x2 key for travel-dependent spreading (compatible with k-basic 2) - Option: Travel-dependent spreading incl. start/stop function – driving signal required - LED work light 12V Storage location: not specified

Condition: new, Year of construction: 2024, overall weight: 265 kg, empty load weight: 265 kg, operation weight: 265 kg, _____Basic equipment > Hydraulically driven single-chamber spreader with feed auger and spreading disc. > Spreader hopper and distributor made of stainless steel. > Dimensions (W x H x L): 1050 x 950 x 1800 mm. > Unladen weight approx. 265 kg. > Incl. tarpaulin cover. > Incl. manual operation. > Incl. rear extension. (Length determined by axle load calculation) Mounted spreader, A1201 B1050 H950 L1800 Carrier vehicle: Multihog MXC Batch/Serial number: 40941 Special equipment - Discharge welded - K-basis 2 control system, fixed wiring harness, microprocessor control in CAN-BUS technology. Regulation of all drives in a closed control loop (with feedback). Functions: - Adjust spreading width - Adjust spreading density - Beacon on/off - Work light on/off - Spreader operation/pause - Illuminated buttons and rotary controls - Data logging - Speed simulation - x2 button - Complete wiring incl. wiring harness separation - Terminal box for mounting outside the cabin Rear apron W 1500 x H 500 Yellow beacon Agitator shaft set - Improves functionality regarding bridging with damp, poor quality spreading material. Auger reversing - Allows reversing of auger direction at the press of a button on the unit in case the feed auger is blocked or jammed. Location: 54595 Prüm Psdpfjw Ibbqex Ad Negg

Condition: used, Year of construction: 2015, operating hours: 2,766 h, power: 16 kW (21.75 HP), Ride-on Lawn Mower KUBOTA G23-2 HD with High Dump 16.1 kW / 22 HP Includes mid-mount mower deck RCK 48 with 1.22 m cutting width, 640-liter grass collection box with hydraulic high dump ---- * Engine: 898 cm³ 3-cylinder KUBOTA diesel engine, emission stage V, engine output (SAE J1995) 16.1 kW (21.9 HP) * Transmission: HST transmission, load-sensing control, max. speed 19 km/h * Mechanical differential lock * Cruise control * Single pedal operation * PTO shaft drive * Oil-cooled disc brakes * Turf tires front 16 x 7.5-8, rear 24 x 12.00-12 Comfort features: * Fully hydraulic power steering, tilt-adjustable steering wheel * Coolant temperature gauge * Hour meter * Tachometer * Easy Checker * Safety system for mower and drive operation * "Kross-Control" single-lever hydraulic control system for all hydraulic functions * Integrated front tie-down points Mid-mount mower deck: Psdpfx Aswcagcjd Nogg * Rotary mower with 2 blades, shaft drive, electrically actuated magnetic clutch, blade drive via spur gear, hydraulic mower lift, central cutting height adjustment 25-102 mm (13-position rotary knob), blade length 673 mm (1.22 m), ground clearance 150 mm Grass collection box: * Hydraulic emptying, discharge height (HD) 1.97 m, integrated fill level warning indicator, includes front weight bracket and additional front weights * Working width: 1.22 m ----Well-maintained used machine from first owner, good condition - ready for immediate use! Errors and changes excepted!

Condition: new, Year of construction: 2024, loading space volume: 41 m³, loading space length: 7,000 mm, loading space width: 2,350 mm, loading space height: 2,500 mm, Applicable material: Manure Pgedpjwdy Hxsfx Ad Nsg

Condition: new, Field of application: Agriculture Technical condition: good Pgedpfxex Rqh To Ad Nsg Damages: none

Condition: used, functionality: fully functional, Year of construction: 1998, working width: 9,000 mm, overall weight: 11,000 kg, operating hours: 11,500 h, Horsch Gülletrac TT 351, year of manufacture: 1998, 350 HP Mercedes V8 engine. Capacity 11 m³, rotary lobe pump 5 m³, hydraulically driven (1 year old). Various spare and wear parts included (tyres, rubber for pump, hydraulic hoses, etc.). Including Bomech 9 metre unit, year: 2013, cutter replaced last year. Machine fully functional and ready for immediate use. Pjdpfxeyc N Are Ad Njgg

Condition: used, Year of construction: 2023, Amazone Cayros XS 1050 SB V 5-furrow plough / Year of manufacture: 2023! ----* Manufacturer: Amazone Pjdpfx Adex Uvlxo Njgg * Model: Cayros XS 1050 SB V RH82 5-furrow * Mounted reversible plough * Year of manufacture: 2023 * Ex-demo unit * Excellent condition * Base weight: 2,100 kg * Permissible total weight: 3,300 kg * Hydraulic DA automatic XS XS-PRO Vario * C-PLUS plough body WL430 pair * Replaceable point shares WSM43 Cayros pair * Quick-coupling axle CAT 3 with ball 36 * Pendulum support wheel DM690 * Price: €19,900 net + 19% VAT. ----For further questions, please call: Erik Kortum: WhatsApp Kai Kortum: WhatsApp All details provided without guarantee or warranty. Subject to errors and prior sale.

Condition: like new (used), Year of construction: 2023, Tindo Cooking Kettle 400L Year 2023 Pjdpfx Aet Tx Dlsd Nogg Capacity 400 Ltr Fully stainless steel Tipping facility Terminal fluid jacketed vessel Variable speed mixing control Vertical lift on head As new condition Only used for product testing

Condition: used, functionality: fully functional, Year of construction: 2020, power: 13.57 kW (18.45 HP), motor manufacturer: John Deere, fuel type: diesel, color: green, overall weight: 728 kg, total height: 1,867 mm, total length: 3,022 mm, total width: 1,486 mm, machine/vehicle number: 96648, Equipment: lighting, Technical Data Year of manufacture: 2020 Engine: Diesel, 4-stroke, 3-cylinder Engine power: 13.57 kW Tank capacity: 27.6 l Payload of loading area: 454.0 kg Trailer load: 590.0 kg Displacement: 854 ccm² Transmission: stepless (continuously variable) Pgodpfjycqwkox Ad Nsg Weight: 728 kg Payload: 625 kg Dimensions (L x W x H): 3.22 m x 1.47 m x 1.87 m General signs of use, fully functional, UVV

Condition: used, functionality: fully functional, Year of construction: 2019, power: 11.9 kW (16.18 HP), motor manufacturer: John Deere, gearing type: automatic, fuel type: gasoline, maximum speed: 45 km/h, color: green, machine/vehicle number: 2496428, Technical Data Year of manufacture: 2019 Petrol engine 570 cc Seats: 2 Speed: 45 km/h Towing capacity: 499 kg Payload: 181 kg Engine power: 11.9 kW (four-wheel drive) Pgedsycqg Eopfx Ad Nsg Tank capacity: 18.5 l Payload cargo bed: 227 kg Cargo bed dimensions: 820 x 1209 x 297 mm Vehicle in good condition Fully functional Technically inspected General signs of use Delivery available on request Rental available on request Stock: 1 unit

Condition: used, Year of construction: 2018, power: 52 kW (70.70 HP), mileage: 55,474 km, First registration: 05.07.2018_____Smart equipped with Rontex winter service blade & Lehner E70 spreader - ready for immediate use! For sale is a Smart vehicle outfitted with a Rontex snow plow and Lehner E70 spreader – ideal for winter maintenance on sidewalks, parking lots, courtyards, and narrow driveways. Equipment: • Rontex snow blade – robust, reliable, perfect for confined areas Pgsdpfx Adjxzam Ds Nog • Lehner E70 spreader – precise application of salt or grit • Compact vehicle – agile, economical, and easy to maneuver • Ideal for facility management, municipalities, businesses, and private properties Advantages: • Ready for immediate winter service • Low maintenance and operating costs • Significantly more efficient than manual work • Also suitable for narrow paths and courtyards Smart 453 fortwo, First registered 05.07.2018, mileage: 52,900 km, white/white, 71 HP, automatic transmission – twinamic, smartphone integration, cruise control, smart Media System, electric windows with comfort operation, tinted glass, seat heating, panoramic roof, automatic climate control, synthetic leather seats, multifunction steering wheel, navigation system (WME4533421K290616). Equipped with Rontex snow blade and Lehner spreader. Also available for rent! Location: Plötz Dirk Facility Management

Condition: used, Year of construction: 2018, power: 66 kW (89.73 HP), mileage: 34,187 km, Initial registration: 09.01.2018 Smart fortwo with winter service equipment Year of manufacture: 2018 First registration: 09.01.2018 Engine power: 90 HP (66.2 kW) Pjdpfex Surrsx Ad Njgg Mileage: 36,000 km Main inspection (TÜV): 01.09.2027 Attachments: - Rontex snow plow, Ecoplow 180 (Record no.: 11933, Serial no.: S18020200152) Year of manufacture: 2023 Intelligent floating position - V4A stainless steel snow plow system with intelligent floating position (system always works with optimal pressure and maintains it, regardless of surface) - Lehner spreader, Polaro 70 E (Record no.: 11947) Year of manufacture: 2023 Rear spreading system consisting of: separate rear beam (installed instead of rear bumper), mounting brackets and Lehner Polaro 70 E rear spreader with electronic control - Plow boundary markers (2 pcs) - Shovel holder (stainless steel) for broom and/or shovels - Removable rotating beacon with telescopic pole Location: 63263 Neu-Isenburg

Condition: used, gearing type: other, fuel type: diesel, mileage: 1,001 km, driver cabin: other, Vehicle location: Bovenden, Pgjdpfx Aei Rpcbed Nog Body: Hydraulic pump USED No.: 2J7366 ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: used, gearing type: other, fuel type: diesel, mileage: 1,001 km, driver cabin: other, Vehicle location: Bovenden, Psdpfx Aji Rpcied Nsgg Body: Hydraulic pump USED No.: 2737J4457 ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: new, gearing type: other, fuel type: diesel, driver cabin: other, Vehicle location: Bovenden, Body: Hydraulic pump NEW No.: 8748J8747 ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Pjdoi Rn Umjpfx Ad Njgg - .

Condition: new, gearing type: other, fuel type: diesel, driver cabin: other, Vehicle location: Bovenden, Body: Hydraulic pump NEW No.: 7759J4027 ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Pgedpfei Rpa Iox Ad Nsg - .

Condition: used, gearing type: other, fuel type: diesel, mileage: 1,001 km, driver cabin: other, Vehicle location: Bovenden, Body: Hydraulic pump USED No.: 2J7366 ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - . Psdpfxsi Rpcfj Ad Njgg

Condition: used, gearing type: other, mileage: 1,001 km, driver cabin: other, Vehicle location: Bovenden, Body: for grader, 6 cylinder engine no. 53A6019 ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Pjdpfx Adoi Rphge Njgg - .