Condition: used, Year of construction: 2023, operating hours: 30 h, power: 107 kW (145.48 HP), maximum speed: 40 km/h, front tire size: 540/65R24 BKT, rear tire size: 650/60R28 BKT, Equipment: all wheel drive, compressed air brake, Claas Arion 470 CIS+ Approx. 30 operating hours Current equipment: Rear tires: BKT 650/60R 38 Front tires: BKT 540/65 R24 CLAAS front linkage 2.8 t including external controls External controls on the front linkage (CIS) 2 engine speed memories with start gear and automatic shifting Alternator 200 A/h ISOBUS pre-installation, rear Task Control Basic activation, tractor side Multifunction control lever with ELECTROPILOT Reverse shift function on the multifunction control lever Rear linkage, electro-hydraulic, 6.25 t Lower link Cat. 3 with catch hook Top link Cat. 3/2 with catch hook Automatic drawbar with 38 mm pin diameter Air brake system (dual-circuit) Additional compressed air connection, right side of the cab Hydraulic system Load-sensing (150 l/min) 3 electro-hydraulic proportional control units, CIS+ Mid-axle control units with front axle and 1 dual-clutch/rear connection 2 plug-in connections at the front HEXASHIFT transmission Gear ratio 40 km/h PROACTIV front axle with independent wheel suspension including steering angle sensor Standard rear axle Debsv R Niwsvpt R Ijkl 540/540 ECO + 1000 rpm PTO shaft 6-piece PTO shaft, 1"3/8" With automatic PTO, rear SMART STOP with cruise control management 145 hp max. power, 154 hp homologated rated power, ECE R 120 Automatic, electronic battery master switch 155 hp max. power, 154 hp homologated rated power Rated power, ECE R 120 6-post PANORAMIC cab, 2-point cab suspension Mechanical mirror, including wide-angle mirror, telescopic Additional interface sockets 2 spare driver's headlights on the roof, halogen Main headlights + 2 work lights on the hood LED work lights: 2 front, 4 rear Comfort seat, fabric, low-frequency suspension, heated Passenger seat with seat belt MP3 radio with Bluetooth, USB, and hands-free system Cooling compartment for a 1.5 l bottle (under the guide seat) Automatic all-wheel drive, steering angle-dependent | Internal No.: 11114182

Condition: used, Year of construction: 1975, operating hours: 7,771 h, power: 38 kW (51.67 HP), Engine and transmission run well! * Air-cooled * 3-cylinder * Diecast convertible top * Front tires: 7.50-16 * Rear tires: 14.9R23 * 4-speed manual transmission Internal vehicle number: 10820----Subject to errors and prior sale. Dkjbvpt Rswbypbs Isl

Condition: used, Year of construction: 1967, operating hours: 7,040 h, power: 31 kW (42.15 HP), next inspection (TÜV): 03/2027, Renault SUPER 6 R7050. EZ: 12/1967. 4x new tzmeier convertible tops. Dobvptowfknpe R Ijkl Toolbox, top-mounted exhaust, rear PTO tow bar, rear power lift with drawbar, 6-speed, suspension seat. Original cardboard letter included... Vehicle registration document, certificate of registration, owner's manual, TÜV reports, and invoices included. =Daily purchase of commercial vehicles, and trade-ins possible=

Condition: used, Year of construction: 2018, _____Sale on behalf of a customer: MF TenderTD 1310 TRCYear of manufacture: 2018Working width: 12.70 metersTransport length: 5.70 metersRotors: 10Tine carriers per rotor: 6ChassisPower requirement approx. 66kW / 90 PSRequired hydraulic connections 1 x EW, 1 x DWPTO shaft speed 540Warning signs, lighting,Storage location:null Dsbvpjlrpnzst R Iekl

Condition: like new (used), Year of construction: 2023, Tindo Cooking Kettle 400L Year 2023 Capacity 400 Ltr Fully stainless steel Tipping facility Terminal fluid jacketed vessel Debjt Tx Dlevpt R Iekl Variable speed mixing control Vertical lift on head As new condition Only used for product testing

Condition: new, Price including 19% VAT and with studded tires, front loader including shovel -- NOW LEASING/RENT TO OWN SPECIAL OFFER -- -- FOR 199€ NET PER MONTH with 0€ down payment -- Regardless of whether it is vineyard work, horse farm work, farm, stable work, mucking out, transporting bales, green care, wood work. The STARTRAC 263 is equipped for all tasks Registration documents: • Including COC papers • Including FIN confirmation • Including TÜV confirmation Optional tire types: Startrac 263: • Field tires 11,750€ gross • Industrial tires 12,450€ gross • Lawn tires 12,450€ gross • Radial tires 12,150€ gross • Galaxy Garden Pro 12,150€ gross Startrac 263 with front loader including shovel: • Field tires 15,950€ gross • Industrial tires 16,650€ gross • Lawn tires 16,650€ gross • Radial tires 16,350€ gross • Galaxy Garden Pro 16,350€ gross Front loader data: • Enormous maximum LIFTING FORCE OF 500 Kg • Parallel guidance • Removable • 3 control circuits • Floating position • Joystick control Various attachments are of course also available: • Crocodile bit, pallet fork, bale spikes and much more. Technical data: Engine: • 1,318 cm3 3-cylinder Mitsubishi diesel engine • Engine power UN EC 120 18.2 kW (24.8 HP) • Emission level 5 • Fuel tank 24 l Gearbox: • 9V/3R • Max. speed 24 km/h (depending on tires) • Differential lock All-wheel drive: • Selectable all-wheel drive Comfort: • Headlights • 1 x work light at the rear • Spacious driver's platform • Hydraulic power steering • Adjustable driver's seat • Cup holder • 12-volt socket • Mobile phone holder • Tool box PTOs: • Rear PTO with 540 and 540E 1/min Hydraulic system: • Working hydraulics flow rate 20 l/min • Rear three-point cat. 1 • Lifting capacity at the lower link end 800 kg • 4 hydraulic connections at the rear Drawbar: • Standard • Permissible support load: 250 kg • Permissible trailer load, unbraked: 1,500 kg • permissible trailer load with brakes: 2,000 kg Dimensions: • Total length: 2,677 mm • Total height (depending on tires): 2,192 mm • Wheelbase: 1,550 mm • Unladen weight (depending on equipment): 920-1,067 kg • Ground clearance (depending on tires): 310 mm • Maximum axle load at the front (depending on tires): 630 kg • Maximum axle load at the rear (depending on tires): 1,170 kg • Permissible total weight (depending on tires): 1,800 kg We would be happy to offer you a viewing and test drive after you have arranged an appointment with us by telephone. Our services at a glance: • Large selection of goods directly on site • Assistance with loading and the option of taking your goods home • Europe-wide delivery of your goods • Ordering accessories and spare parts • Conversion of many vehicles to comply with the German Road Traffic Act (StVo) • Friendly and competent advice We would be happy to provide you with a financing, leasing, or hire-purchase offer! For both commercial and private customers. Terms of 12-120 months are available at the best possible conditions. We would be happy to provide you with a non-binding offer. We also offer attractive terms for the purchase of your used vehicles and machinery, regardless of whether they are tractors, excavators, ATVs, or wheel loaders. All information is provided without guarantee; errors and omissions are reserved. Dobvptswd H H Es R Iokl

Condition: new, Functionality: fully functional, Year of construction: 2024, power: 1.62 kW (2.20 HP), motor manufacturer: Ceccato, Ceccato wood splitter type Sple 6 Two-hand operation Electric oil pump drive 2.2 kW Dkobvptovntl Rs R Ijl Lifting height 540 mm Log length 540 - 1000 mm

Condition: used, Year of construction: 1978, operating hours: 5,632 h, power: 44 kW (59.82 HP), * Air-cooled * 4-cylinder * Front tires: 7.50-18 * Rear tires: 14.9R28 * 4-speed manual transmission Djbvpt Rewbynwj Iokl * Gross vehicle weight: 4000kg ----Internal vehicle number: 10821-----Subject to errors and prior sale

Condition: used, Year of construction: 1992, Railway tracks, chipper, shredder, driven by a 4-cylinder Hatz diesel engine, intake chain approx. 2000 mm, hydraulically adjustable in inclination, inlet shaft approx. 35 cm wide, outlet hydraulically pivoting, coupling, track width approx. 1430 mm Dsbvptsvnnbye R Iskl Our offer is generally without a new TÜV inspection. If a new TÜV inspection is required, we would be happy to make you an offer from our partner workshops! The vehicle can be covered with advertising and/or labeled. Our general delivery and payment terms apply. We would be happy to provide you with a financing or leasing offer for this object. Please contact us!

Condition: new, Year of construction: 2025, Functionality: fully functional, total length: 2,800 mm, total width: 750 mm, total height: 1,600 mm, power: 0.55 kW (0.75 HP), input voltage: 400 V, input frequency: 50 Hz, Equipment: documentation/manual, emergency stop, Kompakte Förderschnecke mit Mischer – vielseitige und platzsparende Lösung Dieses Modell kombiniert zwei Funktionen in einem Gerät – das spart die Anschaffung von zwei separaten Maschinen. Die Einheit wird häufig als Basis für Futtermittel-Komplettanlagen (Mini-Linien) in kleinen und mittleren landwirtschaftlichen Betrieben eingesetzt. Technische Daten – Modell: ShTP-ZK-0,6 / ShTP-ZK-1 • Spannung: 400 V Dkebvowhwilept R Ijl • Motorleistung der Förderschnecke: 0,55 kW • Motorleistung des Mischers: 2,2 kW • Förderleistung: bis zu 3000 kg/h • Mischkapazität: bis zu 1000 kg/h • Trichtervolumen: 0,6 m³ • Abmessungen: 1600 × 750 × 2800 mm • Gewicht: 220 kg

Condition: like new (used), Functionality: fully functional, Year of construction: 2022, operating hours: 71 h, McConnell Robocut T600 Price: €48000 + vat Year 2022 Hours: 71.8 The McConnel Robocut is a high performance, versatile tracked mower. Suited best in harsh environments and working within dangerous conditions. Certain terrain is deemed too dangerous for normal grass care options and this is where the McConnel Robocut thrives. Railways, high traffic roads/motorways, river-banks, and steep embankment over growth are easily taken care of safely and quickly without the risk of damage and most importantly, injury. • Up to 25 times faster than manual cutting • Tackles slopes up to 55 degrees • More fuel efficient than a three-man strimming team • Multi-functional remote control capability • Proven engine technology delivers outstanding reliability • Easy to use proportional controls • Work safely outside danger zones Attachments: Option 1: Robo-Mulch Mulcher €3500 + vat Key Features • 1.25m cutting width Debvpjtya U Tot R Iokl • 22 ultra heavy duty hammer flails • Unique high-performance rotor allows flails to swing through 360 degrees • Hydraulic front hood • Reinforced steel push bar • 40mm max cutting capacity • 3000 rpm rotor speed • Created from Domex (Strenx) steel • 315kg weight Option 2: ROBO-FOREST Forest €3500 + vat KEY FEATURES • 1.30m cutting width • 50 hard-wearing tungsten carbide fixed teeth • 50mm max cutting capacity • Hydraulic front hood • Reinforced steel push bar • 3000 rpm rotor speed • 332kg weight • Built from Domex (Stenx) steel

Condition: ready for operation (used), Functionality: fully functional, Year of construction: 2017, operating hours: 2,837 h, power: 45.6 kW (62.00 HP), Equipment: air conditioning, Front loader, single and dual-circuit air brake system, air conditioning, 40 km/h, all-wheel drive Dsbswdpwmovpt R Iokl

Condition: used, Year of construction: 2016, operating hours: 80 h, Field of application: Forestry Please contact ATS Norway AS for more information Please provide reference number upon request: 19813 Specifications: Model year: 2016 Hours: Only 80 hours Belts: Adjustable (can be moved in and out) Included accessories: Dsbvpsv U Spnst R Iskl 3 sets of knives Cooling fluid Oil and filter Ready for delivery Description: Timberwolf 230 VTR wood chipper from 2016 with only 80 hours. The machine comes with 3 sets of knives, cooler fluid, oil and filter. The tracks can be easily retracted and retracted for better flexibility and handling. The machine is ready for immediate delivery. Hours: 80

Condition: used, Year of construction: 2021, operating hours: 1 h, power: 55 kW (74.78 HP), gearing type: other, first registration: 09/2021, mileage: 30,740 km, driver cabin: other, Equipment: cruise control, soot filter, * SWINGO 200 version, 50 km/h, with two hydraulically extendable, pushed disc brushes (independent brush control), selectable 2-/4-wheel steering, and disc brakes on the front and rear axles * Mileage: 30,740 km * 3,555 engine operating hours * 1,916 sweeping and vacuuming operating hours * Paint: RAL 2011, orange * Tires: 225/70 R 15, front 60%, rear 60% * VM diesel engine type R 754, EURO 5, 75 hp * Multifunction display * Adjustable steering column * Remote control for hopper emptying * Folding beacon * Top work lights (2 pcs) * Viewing mirror for work area * Pressurized water system with dirty water pump * Independent brush control (raising/lowering, Ground pressure, inclination) Dksbvpjvztahst R Ijl * Suction nozzle guide with casters * Air conditioning * Air-suspended driver's seat * Passenger seat * Rear area monitoring with monitor and camera * Mixed disc brush, approx. 70% Other: * Trade-ins and purchase of vehicles and machinery are possible. * Sale price excludes transport and delivery. * No liability for printing and typographical errors. * Errors, changes, and prior sale reserved. * Offer subject to change. * Photos may vary. Price applies to existing condition. * All information is provided without guarantee. - .

Condition: used, Year of construction: 2025, operating hours: 3 h, CLAAS Jaguar 940 Demonstration Machine 2025 Dksbvptjwfivre R Isl Equipment: Best Brand - Driver's Package: Comfort cab with A/C MATIC (automatic air conditioning and heating) Electric and heated rearview mirrors LED maintenance and access lighting DAB+ radio Premium LED work lighting Cooling unit for storage box L Sun blinds, smartphone holder, and compressed air in the cab Leather comfort seat, air-suspended PREMIUM LINE Longlife (6,000 operating hours or 10 years) PREMIUM LINE advanced package - Crop flow L and carbide counterblade Assistant package: DYNAMIC POWER Camera system, ready AUTO Fill wagon filling system V-FLEX 28 chopping unit, including corn knife MULTI CROP CRACKER MAX 120/130 teeth with Busa CLAD coating Silage additive system with tank (375 l) and ACTISILER 37 Electro-hydraulic accelerator gap adjustment Drive axle with differential lock Front tires 710/75 R34 Front tire pressure control system Mercedes Benz R6-cylinder OM471 LA (390 kW/530 hp) Compressed air horn Rear camera with CEBIS display PROFI CAM QUANTIMETER yield measurement Steering angle sensor STOP ROCK stone detector CAM PILOT steering pilot Dynamic steering Compressed air brake PickUp 300 Profi Contour | Internal No.: 11277163

Condition: new, Functionality: fully functional, Year of construction: 2025, overall weight: 113 kg, New Packaging Machine with Scale Peletto TT-125 Weighing and Packaging Machine SPECIAL OFFER! CLEARANCE SALE! The TT-125 weighing and packaging machine is designed for accurately weighing and dispensing bulk products. Dispensing is carried out into ready-made polyethylene or polypropylene bags. It operates in semi-automatic mode and requires the operator to place the bag, start the dispensing process, and remove the filled bag. The machine works perfectly in combination with the ZN-500 impulse sealer. European product, warranty included, spare parts available. Net purchase price with VAT number. Dksbvptswhcu Te R Iol Pick-up in person or delivery upon agreement. It is possible to view and test the machine before purchase. I look forward to your inquiries.

Condition: new, Year of construction: 2025, RSM 22 hooklift tandem hooklift * Container lengths up to 7m * Hydraulic support foot * Tires 600/50 R22.5 * BKT profile FL 693 M * Trailer hitch below * Ball head coupling up to 4t, K80 * Plastic half-shell mudguards * 2nd axle liftable (Basic operating terminal required) * Basic operating terminal * Additional tipping cylinder (tipping aid) makes it easier to tip the containers * Air suspension lowering lock Dksbvsq Ett Nept R Iol * Pressure gauge for reading the approx. load status * LED work lights mounted at the rear * LED work lights mounted at the front * Storage compartment * incl. TÜV approval 40 km/h For further information please do not hesitate to contact us

Condition: new, Year of construction: 2025, Ideal for shredding straw, polystyrene, leaves, hay and bread. Throughput depends heavily on the sieve and source material: - up to a maximum of 350 kg / h for straw with a 15 mm sieve - up to 60 kg / h for EPS with a 15 mm sieve Motor 11 KW - 400 volts, (9.2 kW or 15 kW also possible upon request) Optional: *Surcharge for the next larger machine with 18.5 kW and larger silo diameter + 1,995 € net stable steel construction, hardened cutting blades, sieve with interchangeable inserts, optional (10), 15, 22, 26, 30, 40, or 60 mm perforation with electric drive with star-delta switch Ue protection and 8 m supply line ready to plug in, blow-out nozzle 150 mm, optional for plastic or Grain pipes, Blowing width approx. 12 m, Chassis with 2 wheels Ø 380 mm, and a swiveling support wheel Ø 125 mm, all wheels with solid rubber tires, Dimensions approx. 1200 x 900 x 1270/1400 mm lxwxh Weight approx. 240 KG, Spare parts prices and options: 24 blades, hardened €9.90 each net 6 bolts €14.90 each net Dsbvpszbizot R Ijkl 1 sieve €475 each net Cover €290 each net Styrofoam disc: €600 each net

Year of construction: 2016, Condition: as good as new (ex-display), Stationary feed mixing plant Manufacturer: Hoegild Type: Feeder VM 32 m³ Year of manufacture: 2016 The machine is unused! electric gear motor: 75kW Low / narrow model with three Hoegild Quick Flow mixing screws height of the mixing tub including base approx. 3,20 m Height of the three mixing screws, each 1,80 m high. Each screw is mounted with 9 blades. The mixing tub is mounted on a chassis and fixed on a concrete foundation. Conveyor belt for unloading the finished feed mixture, can be hydraulically lowered up and down. Width 1,50 m Length 4 m Hydraulic unloading gate of the feed mixture width 1,10 m height 0,80 m Switchgear Rittal 1800 x 1800 x 600 mm Incl. base 200 mm, system ventilation, EMERGENCY STOP circuit PLC control, 24 V power supply incl. UPS emergency power supply Current and power measurement with display in the control cabinet door Main switch 250A with motor drive. Equipment: 1 frequency converter for one drive motor 75 kW incl. fuse protection and DC link choke. Operation of the plant via TFT touch display 6". Control of 2 screw conveyors and 1 hydraulic unit. The feed mixing plant is located in the inlet. Please make an appointment before visiting the plant! Price on request Purchase price net plus legally valid VAT. The sales tax is shown separately on our invoice. Changes, errors and prior sale reserved. Debvpspu A Eyjt R Iskl Sold without warranty and guarantee only to traders.

Condition: excellent (used), Catalogue number: 7574 TECHNICAL DATA three-cylinder liquid-cooled ISEKI diesel engine 4×4 hydrostatic drive hydraulic gearbox power steering + two speeds + rotary cutting method front cutting unit cutting width 1500mm top discharge lighting comfortable, well-kept heated cabin Total weight 1560kg – used mower, very good condition Net price: PLN 49,900 Djbvov H Di Dspt R Ijkl Net price: EUR 11,730 depending on the price EUR 4.25 (Prices may change with higher fluctuations)

Condition: used, Year of construction: 2024, Dalbo Powerchain 1200 demonstration machine used from 2024 12.00 m working width 10,100 kg empty weight Debvpt Rjv Aqw To Ijkl chassis tires 600/50-22.5 Alliance double folding of the chains hydraulic chassis 2-circuit compressed air brake | Internal number: 11247933

Year of construction: 2024, Condition: used, General information New: Yes Field of application: Agriculture Dobvpt Rsrkkrfo Ijkl Technical information Power: 95 kW (129 HP) Chassis type: rigid Empty weight: 7.682 kg Make of engine: Deutz Top speed: 40 km/h Functional Lifting capacity: 3.500 kg Lift height: 608 cm Other information Rental currency: EUR Production country: FR Additional information Please contact Jan De Lepeleer for more information

Condition: new, Hydraulic cable winch HAW3000 with electric valve and radio remote control for wheel loader, excavator, crane, mini-excavator, tractor, tractor in viticulture, horticulture, building construction, civil engineering and many other applications. With the HAW3000 hydraulic winch you can make many applications easier. Maximum cable capacity at 3000 kg tractive force 40 m with 8 mm wire rope. Maximum rope capacity at 1700 kg tractive force 70 m with 6 mm wire rope. Maximum rope capacity with 3000 kg traction force 70 m with 6 mm plastic rope. Maximum rope capacity with 2000 kg traction force 100 m with 5 mm plastic rope. Maximum rope capacity with 1000 kg traction force 220 m with 4 mm plastic rope. Basic equipment 30 m 8 mm wire rope ⦁ In viticulture, agriculture, forestry and horticulture ⦁ In building construction, civil engineering and road construction ⦁ Pulling out rootstocks and trees ⦁ As winch for mounting on backhoe cranes and excavators ⦁ As a winch for tractors, working machines and grape harvesters A robust steel construction with 3-sided screw-on possibilities (left, right, rear) with M 12 threaded holes. This provides many possibilities for fastening the winch. (Threads are cut and painted. They have to be re-cut before use because of the rust protection) Large lubricated pulley for long life of the steel cable. ⦁ Maximum working pressure: 240 bar peak ⦁ Oil flow rate up to 125 l/min short-term max.150 l/min ⦁ Maximum tractive force 3000 kg ⦁ Rope speed 100 m/min with oil quantity 1 [...] Dksbvptofn Tu Te R Iol

Condition: used, Catalog number: 7575 TECHNICAL DATA Yanmar 3TNE78 engine 4-cycle, 3-cylinder in-line diesel engine liquid cooled engine power 23kW (31HP) hydrostatic transmission direct injection cutting width 1500mm 3 blades Debov H Dlrsvpt R Iskl mowing unit driven by PTO shaft – used mower, very good condition The John Deere 1445 rotary mower is distinguished by very good cutting quality at high working speed. The mower is characterized by the best parameters: high efficiency, high torque engine, four-wheel drive engaged when needed and hydrostatic transmission with 2-pedal control. Net price: PLN 38,900 Net price: EUR 9,140 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)

Condition: new, Year of construction: 2023, DALBO Powerchain 800 Chain disc harrow Year of manufacture 2023, demonstration machine used Equipment: Dksbvptsv Aqm Is R Ijl Lower link attachment Cat III 2-circuit air brake hydraulic chassis 2 x dw connections required (1x folding, 1x chassis) 1x ew connection required (chain tension) Warning signs with lighting 8.0 m working width | Internal no.: 11118812