Used welding tables for sale (620)

Condition: new, table length 3000 mm table width 1500 mm table height 200 mm weight of the machine ca. 1,6 t The Professional 750 3000x1500x200 mm table has a diagonal hole arrangement on the table top and a parallel hole arrangement in the 50 mm grid on the sides. The holes have a diameter of 28 mm. The table has a material thickness of about 24.5-27 mm and is made of high quality steel S355J2 + N. Hfsdpsgvkc Nsfx Aaled Grid lines at intervals of 100 mm make it easier for you to set up your device. The welding tables are provided with scale as standard. Including 6x feet basic equipment 650 Article no. 280858.X

Condition: new, table diameter 490 mm table load 300/150 kg swivelling range 0-90 manuell Grad table load horiz. 300 Kg table load vert. 150 Kg boring diameter 65 mm table turning speeds 0,4 - 4,0 U/min voltage 230 V total power requirement 0,2 kW weight of the machine ca. 0,1 t dimensions of the machine ca. 0,5 x 0,52 x 0,5 m The D-BYT N welding manipulator has a hollow shaft, also known as Spindle bore in the rotary table, which makes inert gas welding possible. the Due to the compact design, turn-tilt tables can be installed in any integrate existing production facilities. Inert gas welding (forming gas). thereby simplified. Features: Hedpfx Aaogvkktolofd - Double foot pedal (start-stop/left-right) included - Infinitely adjustable rotation speed of the table - Suitable for any welding process, even high frequency - Very high stability - compact model - Through hole in the turntable plate - CE marking - Very good value for money

Condition: new, table length 3000 mm table width 1500 mm Hodpfxegvkdbo Aalofd table height 200 mm weight of the machine ca. 1,6 t The table Professional Extreme Article no. 7D 3000x1500x200 mm has a diagonal hole arrangement on the table top and a parallel hole arrangement in 50 mm grid on the sides. The holes have a diameter of 28 mm and the table has a material thickness of about 24.5-27 mm. The table top is made of hardened tool steel. The low-loaded sidewalls are still made of steel S355J2 + N for cost reasons. Grid lines at intervals of 100 mm make it easier for you to set up your device. The welding tables are provided with scale as standard. Including 6x feet basic equipment 650 Article no. 280858.X

Condition: new, table diameter 900 mm table load 1 t swivelling range 0-135 Grad excentricity 200 mm Hfjdogvkikopfx Aaled table turning speeds 0,12 - 1,2 U/min Torque 2000 N/m total power requirement 0,75 kW dimensions of the machine ca. 1,5 x 1,020 x 0,9 m The D-HB tilt and turn tables are very stable due to their heavy construction and therefore particularly suitable for heavy and precise Positioning activities and circular welding work. Features: - Easy installation - Increase in production is made possible - Improvement of the welding quality through optimal positioning and Cruise control - Reduction of crane hours and handling time, during which the Improved occupational safety. - Self-locking gear, therefore no leading and trailing behind with eccentric burden - Electronic components from Schneider, Siemens and Delta - Frequency-controlled stepless speed of the turntable - High stability due to the robust construction - CE certificate - The D-HB series includes a remote control with foot pedal for left-right / Start-stop.

Condition: new, table length 4000 mm table width 2000 mm table height 200 mm weight of the machine ca. 2,5 t - high quality steel S355J2+N + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Bore Ø 28 mm - Holes surface 100x100 mm grid - Rounded corners, edges and holes - Side panel height 200 mm - Hole spacing side panel 50 mm - Including scaling on the surface - Structure reinforced with ribs - Grid lines allow for precise builds Hedoibw Sxepfx Aalefd The basic equipment foot is available in various lengths. The load capacity of the foot is 2,000 kg.

Condition: new, table length 2400 mm table width 1200 mm Hjdpfxegvkfvj Aaljfd table height 200 mm weight of the machine ca. 1,0 t The table Professional 750 Article no. 2400x1200x200 mm has a diagonal hole arrangement on the table top and a parallel hole arrangement in 50 mm grid on the sides. The holes have a diameter of 28 mm. The table has a material thickness of about 24.5-27 mm and is made of high quality steel S355J2 + N. Grid lines at a distance of 100 mm make it easier for you to set up your device. The welding tables are provided with scale as standard. Including 4x feet Basic equipment 650 Article no. 280858.X

Condition: new, table length 2400 mm table width 1200 mm table height 200 mm weight of the machine ca. 1,0 t The table Professional Extreme Article no. 4-280030.X7 2400x1200x200 mm has a hole arrangement in the 100 mm grid on the table top and a parallel hole arrangement in the 50 mm grid on the sides. The holes have a diameter of 28 mm and the table has a material thickness of about 24.5-27 mm. The table top is made of hardened tool steel. The low-loaded sidewalls are still made of steel S355J2 + N for cost reasons. Grid lines at a distance of 100 mm make it easier for you to set up your device. The welding tables are provided with scale as standard. Including 4x feet Basic equipment 650 Article no. 280858.X Hfedpfx Aajgvkfyelod

Condition: new, table diameter 560 mm table load 0,3 t swivelling range 0-90 Grad table turning speeds 0,25 - 4 U/min Torque max. 360 N/m centre of gravity max. 150 mm total power requirement 0,4 kW The D-HB tilt and turn tables are very stable due to their heavy construction and therefore particularly suitable for heavy and precise Positioning activities and circular welding work. Characteristics: - Easy installation - Increase in production is made possible - Improvement of the welding quality through optimal positioning and Cruise control - Reduction of crane hours and handling time, during which the Improved occupational safety. - Self-locking gear, therefore no leading or trailing behind with eccentric load - Electronic components from Schneider, Siemens and Delta - Frequency-controlled stepless speed of the turntable Hfjdpfxjgvkgtj Aaljd - High stability due to the robust construction - CE certificate - The D-HB series includes a remote control with foot pedal for left-right / Start-stop.

Condition: new, table diameter 350 mm table load 0,1 t swivelling range 0-90 Grad table load horiz. 100 kg table load vert. 50 kg boring diameter 30 mm table turning speeds 0,5 - 5 U/min voltage 230 V total power requirement 0,2 kW weight of the machine ca. 0,2 t dimensions of the machine ca. 0,5 x 0,5 x 0,5 m Welding table with hollow shaft D-DWP Hfodpfx Ajgvkk Nsalsd Tilt and turn tables with bore for turning, tilting and welding small workpieces from 100 kg. - Rotation and tilt axis - Infinitely variable speed - Compact model - Incl. Foot pedal

Condition: new, table diameter 690 mm table load 500 kg swivelling range 0 - 90 Grad table load horizontal 500 Kg table load vertikal 250 Kg boring diameter 100 mm table turning speeds 0,2 - 1,9 U/min total power requirement 0,37 kW The D-BYT N welding manipulator has a hollow shaft, also known as Spindle bore in the rotary table, which makes inert gas welding possible. the Due to the compact design, turn-tilt tables can be installed in any integrate existing production facilities. Inert gas welding (forming gas). thereby simplified. Features: - Double foot pedal (start-stop/left-right) included - The new welding table D-BYT-500N includes, in addition to the standard start/ Stop foot pedal also an extra remote control (on the cable). - Infinitely adjustable rotation speed of the table - Suitable for any welding process, even high frequency - Very high stability - compact model - Through hole in the turntable plate - CE marking Hfjdpfx Aeh Evt Ujaljd

Condition: new, table length 3000 mm table width 1500 mm table height 200 mm weight of the machine ca. 1,6 t The table Professional Extreme Article no. 4-280040.X7 2400x1200x200 mm has a hole arrangement in the 100 mm grid on the table top and a parallel hole arrangement in the 50 mm grid on the sides. The holes have a diameter of 28 mm and the table has a material thickness of about 24.5-27 mm. The table top is made of hardened tool steel. The low-loaded sidewalls are still made of steel S355J2 + N for cost reasons. Grid lines at intervals of 100 mm make it easier for you to set up your device. Hsdpfjgvkc Tjx Aalsfd The welding tables are provided with scale as standard. Including 6x feet basic equipment 650 Article no. 280858.X

Condition: new, table length 2400 mm table width 1200 mm table height 200 mm weight of the machine ca. 913 kg 7D - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 24.5 – 27 mm - Sidewall made of high quality steel S355J2+N + plasma nitriding - Bore Ø 28 mm - Holes surface in diagonal grid - Rounded corners, edges and holes - Side panel height 200 mm - Holes in the side wall in the diagonal grid - Including scaling on the surface Hfedpfegvkf Dex Aaled - Structure reinforced with ribs - Grid lines enable precise build-ups Including 4x feet basic equipment 650 item no. 280858.X

Condition: new, 0,6 t -- mm -- mm consisting of: 30x article no. 2-280510 Quick release pin short - Clamping of 2 components - burnished - with twist lock 8x article no. 2-280410.N Universal stop 150 L - nitrided - nitrided - as standard with fine scaling on both sides 4x article no. 2-280420.N Universal stop 225 L - nitrided - nitrided - as standard with fine scaling on both sides 8x article no. 2-280110.G Stop and clamping angle 175 L - cast / black oxide finish - Hole / elongated hole - Cast / burnished 2x article no. 2-280162.N Stop and clamping angle 500 G - nitrided - Left stop - nitrided 1x article no. 2-280166.N Stop and clamping angle 750 G left - nitrided - Left stop - nitrided 1x article no. 2-280167.N Stop and clamping angle 750 G right - nitrided - stop on the right - nitrided 1x article no. 2-280910 Tool trolley - painted - Permissible total weight 240 kg 1x article no. 2-280164.N Stop and clamping angle 500 G with turning angle left - Left stop 1x article no. 2-280165.N Stop and clamping angle 500 G with right angle of rotation - stop on the right - Cast / nitrided 4x article no. 2-280152.N Stop and clamping angle 300 G - nitrided - Left stop - nitrided 8x article no. 2-280651.1. Prism Ø 60 135 ° with screwed-in collar - aluminum - aluminum - M16 thread for e.g. B. Prism Extension Item No. 280649 16x article no. 2-280610.N Professional screw clamp - nitrided - nitrided Hfsdpfogvq Hlex Aalsd 6x article no. 2-280630.N Professional screw clamp 45 ° / 90 ° - nitrided - nitrided 4x article no. 2-280426.N Universal stop 300 - nitrided - 3 system holes - nitrided

Condition: new, table length 2400 mm table width 1200 mm table height (lateral area) 100 mm weight 499 kg SIEGMUND authorized dealer - all items available! Product description - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 11.5 - 13 mm - Sidewall made of high quality steel S355J2 + N + plasma nitriding - Hole Ø 16 mm - Holes surface 50x50 mm grid - Rounded corners, edges and holes - Height of side wall 100 mm - Drill holes in the side wall in a diagonal grid - Including scaling on the surface Hodpfoxaab Esx Aaljfd - Construction reinforced by ribs - Grid lines enable precise structures. The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Equipment: - 16 hole pattern / dimensions 2400 x 1200 x 100 mm - Extreme plasma nitrided version with scale - Sidewall with diagonal grid - incl. 6x base equipment

Condition: new, table length 2400 mm table width 1200 mm table height (lateral area) 200 mm weight 981 kg dimensions of the machine ca. 2400 x 1200 mm SIEGMUND authorized dealer - all items available! Product description - High-quality steel S355J2+N + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Bore diameter 28 mm - Surface holes with a 100x100 mm grid Hedpfx Asxaa Ekealefd - Rounded corners, edges, and holes - Side panel height 200 mm - Side panel hole spacing 50 mm - Surface scale included - Construction reinforced with ribs - Grid lines enable precise setups The welding tables are equipped with a scale as standard. Plasma nitrided finish: - Protection against rust, scratches, and weld spatter adhesion - More corrosion-resistant / higher load capacity Features: - 28-hole pattern / Dimensions: 2400 x 1200 x 200 mm - Plasma nitrided finish (750) with scale - Includes 4x base feet

Condition: new, table length 2400 mm table width 1200 mm table height (lateral area) 200 mm weight 1069 kg dimensions of the machine ca. 2400 x 1200 mm SIEGMUND authorized dealer - all items available! Hfedpfjxabffsx Aalsd The welding tables are provided with a scale as standard. Special set - including 28 tool set 3 Product description - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Sidewall made of high quality steel S355J2 + N + plasma nitriding - Hole Ø 28 mm - Surface holes in a diagonal grid - Rounded corners, edges and holes - Height of side wall 200 mm - Drill holes in the side wall in a diagonal grid - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Furnishing: - 28 hole pattern / dimensions 2400 x 1200 x 200 mm - Plasma nitrided Extreme 8.7 version with scale - Diagonal grid on the table surface - Diagonal grid on the side wall - Including 4x basic equipment - incl. 28 tool set 3: + 10x 280610.N clamp + 6x 280630.N clamp + 4x 280648.1.N prism + 24x 280510 bolts + 4x 280740 magnetic bolts + 8x 280410.N stop + 8x 280420.N stop + 6x 280110.N angle + 2x 280152.N angle + 2x 280162.N angle + 1x 280166 + 67.N angle + 1x 283999 accessory set

Condition: new, table length 2400 mm table width 1200 mm table height (lateral area) 200 mm weight 981 kg dimensions of the machine ca. 2400 x 1200 mm SIEGMUND authorized dealer - all items available! Product description - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Sidewall made of high quality steel S355J2 + N + plasma nitriding - Hole Ø 28 mm - Drilling surface 100x100 mm grid - Rounded corners, edges and holes - Height of side wall 200 mm - Drill holes in the side wall in a diagonal grid - Including scaling on the surface Hsdoxab Rnspfx Aalefd - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Furnishing: - 28 hole pattern / dimensions 2400 x 1200 x 200 mm - Extreme plasma nitrided version with scale - Sidewall with diagonal grid - Including 4x basic equipment

Condition: new, table length 1500 mm table width 1000 mm table height (lateral area) 100 mm Hjdpfexaa Rtex Aalofd weight 255 kg SIEGMUND authorized dealer - all items available! Product description - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 11.5 - 13 mm - Sidewall made of high quality steel S355J2 + N + plasma nitriding - Hole Ø 16 mm - Holes surface 50x50 mm grid - Rounded corners, edges and holes - Height of side wall 100 mm - Drill holes in the side wall in a diagonal grid - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Furnishing: - 16 hole pattern / dimensions 1500 x 1000 x 100 mm - Extreme plasma nitrided version with scale - Sidewall with diagonal grid - Including 4x basic equipment

Condition: new, table length 2400 mm table width 1200 mm table height (lateral area) 100 mm weight 466 kg SIEGMUND authorized dealer - all items available! Product description - high quality steel S355J2 + N + plasma nitriding - Material thickness approx. 11.5 - 13 mm - Hole Ø 16 mm - Holes surface 50x50 mm grid - Rounded corners, edges and holes - Height of side wall 100 mm - Distance between holes in side wall 25 mm - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures Hsdpfxoxaable Aalofd The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Equipment: - 16 hole pattern / dimensions 2400 x 1200 x 100 mm - Plasma nitrided 750 version with scale - incl. 6x base equipment

Condition: new, table length 2000 mm table width 1000 mm table height (lateral area) 100 mm weight 351 kg SIEGMUND authorized dealer - all items available! Product description - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 11.5 - 13 mm - Sidewall made of high quality steel S355J2 + N + plasma nitriding - Hole Ø 16 mm Hfodpfx Ajxaa Hboalod - Holes surface 50x50 mm grid - Rounded corners, edges and holes - Height of side wall 100 mm - Drill holes in the side wall in a diagonal grid - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Equipment: - 16 hole pattern / dimensions 2000 x 1000 x 100 mm - Extreme plasma nitrided version with scale - Sidewall with diagonal grid - Including 4x basic equipment

Condition: new, table length 3000 mm table width 1500 mm table height (lateral area) 100 mm weight 726 kg The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Equipment: - 16 hole pattern / dimensions 3000 x 1500 x 100 mm - Plasma nitrided version Professional 750 with scale Hfjdoxab D Uopfx Aalsd - Including 8x basic equipment

Condition: new, table length 2400 mm table width 1200 mm table height (lateral area) 200 mm weight 981 kg dimensions of the machine ca. 2400 x 1200 mm SIEGMUND Authorized Dealer - All items available! !! SPECIAL OFFER !! SIEGMUND Welding Table Retro 2400x1200x200 incl. accessories Product description - High-quality steel S355J2+N + plasma nitriding - Material thickness approx. 24.5–27 mm - Hole Ø 28 mm - Holes surface 100x100 mm grid - Corners, edges, and holes rounded - Side panel height 200 mm Hfjdpsxflftsfx Aaled - Side panel holes in diagonal grid - Construction reinforced with ribs - Grid lines enable precise assembly The welding tables are equipped with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - Corrosion-resistant / higher load capacity Features: - 28 hole pattern / dimensions 2400 x 1200 x 200 mm - Plasma-nitrided version with scale - Includes 4x feet Basic equipment - Includes accessory set (see image 3): * 6x 280604 * 12x 280511 * 8x 280420.N * 2x 280110.N * 1x 283999

Condition: as good as new (ex-display), Year of construction: 2024, weight max. in kg max. 1000 kg turning speeds 0,18 - 0,58 U/min height 976 - 1436 mm inclination 0 - 115 ° table diameter 895 mm voltage 380 V Hjdew U U R Espfx Aalofd total power requirement 2,0 kW weight 685 kg range L-W-H 2414 x 920 x 1436 mm Exhibition machine from 2024 with only approx. 2x operating hours Condition NEW!! Special price on request The AK BEND SRH hydraulic welding positioner is ideal for welding, assembly and maintenance work. Positioning is done via a hydraulic rotation and tilting function. Description: - electro-hydraulic turning and tilting function - Fast handling of workpieces - Maximum productivity thanks to optimal working position - Lifting, tilting and turning workpieces in one clamping - Low idle times thanks to turning components - Maximum work performance thanks to comfortable working - Back-friendly working for the user Equipment: - Continuously variable speed adjustment - Freely movable foot switch - Hand-held remote control with 5 meter cable - Freely movable control panel with digital speed display - Analogue angle display * Manufacturer video (identical rotary table): ?v=Vayw8Ny64nc

Condition: new, table length unterschiedlich mm table width unterschiedlich mm table height (lateral area) unterschiedlich mm weight ca. 240 kg Hedpfxexabvds Aalofd Description : - SPECIAL SET for SIEGMUND 28er clamping tables - ORIGINAL SIEGMUND accessories (!!) included in the scope of delivery : - 1x 280910 .. 28 mm - mobile tool trolley incl. rollers - 8x 280410.N .. Universal stop 150 L nitrided - 4x 280420.N ... Universal stop 225 L nitrided - 2x 280162.N ... Stop and clamping bracket 500 G left nitrided - 1x 280166.N ... Stop and clamping bracket 750 G left nitrided - 1x 280167.N ... Stop and clamping bracket 750 G right nitrided - 1x 280164.N ... Stop and clamping bracket 500 G left nitrided - 1x 280165.N ... Stop and clamping bracket 500 G right nitrided - 4x 280152.N ... Stop and clamping bracket 300 G left nitrided - 16x 280610.N ... Professional screw clamp, nitrided - 6x 280630.N ... Professional screw clamp 45°/90° nitrided - 8x 280651.1.N .. Prism Ø 60-135° nitrided - 8x 280110.N .. Stop and clamping angle 175 L nitrided - 30x 280511 .. Quick-action clamping bolt, double without groove, burnished - 4x 280430.N .. Universal stop 500 S nitrided - 1x accessory set consisting of: - Eccentric, Allen key, brush, - further accessories such as: Probe CleanBasic, Probe Anti-Stick and torch holder

Condition: new, table diameter 1000 mm table load 1200 Kg swivelling range 0 - 135 Grad turning speeds 0,1 - 1,0 U/min max. torque on the faceplate 900 Nm Hfsdpfevn Uwujx Aalod welding current 500 Ampere total power requirement 0,75 + 0,75 kW weight of the machine ca. 0,8 t Welding rotary tilting table - Remote control with cable - 2 x welding current transmission