Precision turning lathe

Schaublin 102 N

Year of construction: 1997, condition: ready for operation (used), - USED - CONVENTIONAL LATHE CENTRE HEIGHT: 102 mm DISTANCE BETWEEN CENTRES: 450 mm MAX TURNING DIAMETER OVER BED: 200 mm MAX TURNING DIAMETER OVER CARRIAGE: 120 mm BAR CAPACITY: 25 mm SPINDLE: 50 - 5000 rpm; 3 kW TAILSTOCK TAPER: CM 2 QUILL DIAMETER: 30 mm QUILL TRAVEL: 80 mm Gijdpfx Asyvlxqjcwjr TURRET HEAD: MULTIFIX OVERALL DIMENSIONS: 1500 x 510 x 1550 mm

Condition: used, Year of construction: 2014, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,500 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 20 rpm, RepairFIT by Dornhöfer The Difference. Installation & Commissioning Included! TECHNICAL MAIN DATA Year of manufacture: 2014 Travel/Capacity: Longitudinal (X): mm 3,000 Transverse (Y): mm 1,200 Vertical (Z): mm 1,500 Clamping table/Clamping surface: Length: mm 3,200 Width: mm 1,000 Number of T-slots on table surface: pcs. 7 T-slot size: mm 22H12 Reference slot: mm 22H7 Distance between slots: mm 140 Maximum transport load: kg 11,000 Paint: graphite grey RAL 7024 and agate grey RAL 7038 Tool holder: ISO 50, DIN 69871 AD Pull stud: DIN 69872 Form A Main drive: Maximum drive power, from 198 rpm: kW 30 Spindle speed range: Spindle speed: rpm 20-6,000 Maximum torque: Nm 935 Speed control: 3-stage (oil-cooled) with automatic changeover Feed rates: X, Y and Z axes mm/min: 2 – 15,000 Maximum rapid traverse speed: X, Y and Z axes mm/min: 25,000 Maximum feed force: X, Y and Z axes: N 22,000 Space requirements: Length approx. BT3200: mm 8,100 (without cross conveyor +1,280 mm) Height approx. (at Z = 1,500 mm): mm 3,800 Width approx. (at Y = 1,200 mm): mm 5,000 (with spacer 4,500 mm) Weight: approx. kg 20,200 Connected load: approx. KVA 52 Gedpfoygipajx Acwoir HEIDENHAIN iTNC 530 HSCI Automatic MTE universal milling head Diagonal 2.5° x 2.5° Automatic tool changer with 40 positions 2 chip conveyors + cross conveyor Coolant system with 20 bar & through-spindle coolant RepairFIT is our proven offer for a profitable entry into our product lines. The machines available in this line are sourced through a strict selection process and undergo thorough inspection (Deep-Dive Check). After intensive cleaning, any identified obvious defects and faults are professionally repaired by our qualified service team.

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, machine/vehicle number: 310435, Completely overhauled - new painting New workbench - new geometry Manufacturing origin Swiss Voltage 380V 50Hz 3Ph Gedpfodr R Tcjx Acwsir Customs position 8458.1930 TECHNICAL DATA Capacities : - height of centres 102 mm - distance between centre, standard headstock type W 470 mm - distance between centres, headstock type W with reduction unit 375 mm - swing over bed 200 mm - swing over carriage 120 mm Bed : - height-width-length 168-100-1000 mm cast-iron bed with ground inverted-V profile Headstocks : - spindle nose for collets W-25 - maximum bore through collet 19.0 mm - headstock with reduction unit, ratio 1:5 Carriages : - stroke of longitudinal tool slide 90 mm - stroke of transverse tool slide 100 mm - size of tools 12x12 mm Tailstocks : - internal taper of tailstock spindle Morse 2 - spindle stroke, screw- and handwheel-operated 80 mm errors and omission excepted-data given without obligation Inventory no. 2250023, machine comprising: 1 NEW workbench 2000x800 mm with blue Urphen worktop 2000x800x50 mm 1 leg, 1 B750 cabinet with 7 drawers 1xD50/2xD75/2xD100/1xD150/1x200 1 bench for overhead control 1 W-25 workpiece holder without gear reducer with clamping key, serviced 1 serviced cross slide 1 reconditioned aligned tailstock 1 380V/50Hz/3ph motor. 2 speeds 1 used W-25 solid centre 1 set of used W25 collets 1 used Reishauer ZMG 2x3 jaw chuck Ø 110 mm on w-25 flange 1 new set of used Multifix tool holders including -1 type A turret with AG20 stud -2 AD1675 chisel holders -2 AD2090 chisel holders 1 Albrecht self-tightening drill chuck, cap 1-13 mm on CM2 tenon, used 1 used CM2 solid centre point OPTION 1 used tensioner with new belt CHF 1000 + VAT 1 AS TYPE B-8 GRINDING MACHINE with 360° swivel quill max. speed 28,000 rpm, adjustable height, adjustment, ref. 800053 CHF 1,325 + VAT

Condition: excellent (used), Year of construction: 2005, Schaublin 102N-VM-CF high precision Swiss lathe Year: 2005 max. admitted diameter over the bed 200 mm max. admitted diameter over the slides 120 mm Height of centers 102 mm Distance between centers 450 mm Bed length 1000 mm Bed height 168 mm Power 4.2 KW Spindle speed 100 - 3000 RPM Spindle W25 Transverse stroke, X axis 100 mm Resolution, X axis (radius) 0,01 mm Longitudinal stroke, Z axis 90 mm Resolution, X axis (radius) 0,01 mm Lead screw - 8 longitudinal feeds - Larger feeds possible when using the thread control for turning Max. cross section of tool shank (Multifix system) 10x10 mm Bar holder (MULTIFIX system) diameter 20 mm Height and side-adjustable tailstock: Internal taper of the sleeve Mk2 Spindle OD 30 mm Spindle stroke 80 mm Godpfew N Rh Ajx Acwjir Coolant tank capacity 23 L Electrical power supply voltage 400 V Overall dimensions: length x depth x height: 1500 x 510 x 1550 mm Accessories / options: - ACU-RITE digital readout unit, 3 axis X-Z-Z1 X resolution 0.001[mm] Z resolution 0.005[mm] Z1 resolution 0.005[mm] - Coolant system - Rear sheetmetal guard - Double Start/Stop pedal and spindle rotation direction inversion - Schaublin W25 collet set - Cast iron chuck W25 Ø110[mm] with jaws - Quick-change toolholder turret MULTIFIX-A with holders - Driving system for auxiliary equipment with BELT adjustable and swivelling belt-tensioning attachment drive device complete with motor belt Ø6x2’500[mm] - Tailstock - etc... Under power in our warehouse.

Condition: used, Year of construction: 1999, x-travel 12000 mm y-travel 3600 mm Giedpsxwdygofx Acwsr z-travel 1500 mm spindle turning speed range 3000 U/min Control: Heidenhain iTNC430 Milling head 2 axes, indexed 2.5° Vertical (Y-axis): 3600 mm Transverse (Z-axis): 1500 mm Longitudinal (X-axis): 12,000 mm Guide rail length: 14,700 mm Guide rail width: 1400 mm Lowest milling position of the spindle nose measured from the floor (head horizontal): 855 mm Low column design 870 x 900 x 2,625 mm: 3,000 kg High stand design 870x900x3,025 mm: 3,500 kg Motor power: 37 kW Mounting: ISO 50/ DIN 69871-A Speeds: 11.7:231:3000 rpm Feed range: 2:2500 mm/min Rapid traverse X-axis: 12000 mm/min Z-Y axis: 15000 mm/min Feed motor power X-axis: 55 Nm Z-axis: 37 Nm Y-axis: 37 Nm Accuracy Positioning accuracy: 0.025 mm Repeatability: 0.015 mm Weight: approx. 42,000 kg Air supply to the machine: 300 L/min at 4.5 bar NOTE: The clamping plates and chip conveyors are not included in the scope of delivery. However, we can offer you both used and new clamping plates and chip conveyors on request.

Condition: good (used), functionality: fully functional, Schaublin 102 N - VM, Machine number BL 330699, Machine equipped with leadscrew, Centre height 102 mm, Leadscrew: diameter 40 mm, hardened and ground thread. Leadscrew pitch: 4 mm. Feeds: 8 longitudinal feeds from 0.02 to 0.3 mm/rev. Thread cutting range: Metric: 20 pitches from 0.25 to 4 mm. Gijdpfxoynimhe Acwjr Imperial (inch): 25 pitches from 80 to 6 tpi. Centre distance 450 mm, max. turning diameter over bed 200 mm, max. turning diameter over cross-slide 120 mm, Spindle speed up to 2,800 rpm, Tailstock, Accessories,

Year of construction: 1987, condition: used, Schaublin 102N lathe with various tools Giedpfxsyhyt Ao Acwjr

Condition: excellent (used), Year of construction: 2015, Maximum turning diameter: approx. 380 mm Maximum swing over bed: approx. 675 mm Maximum turning length: approx. 500–540 mm Bar capacity (main spindle): approx. 76 mm (3″) MAIN SPINDLE Maximum spindle speed: 4,000 rpm Spindle motor power: 26 kW Spindle bore: approx. 77–88 mm Chuck: 8″ power chuck SUB SPINDLE Maximum spindle speed: 6,000 rpm Spindle motor power: approx. 11 kW Chuck: 6″ or 8″ power chuck Part transfer function AXES X-axis travel: approx. 230 mm Z-axis travel: approx. 575 mm C-axis on main spindle (full contouring and interpolation) TURRET / TOOLING Number of tool stations: 12 positions Live tooling capability (drilling and milling) Tool measurement system (Tool Eye) CNC control: Mazatrol Matrix Nexus EIA/ISO programming Conversational Mazatrol programming 19″ color LCD screen (touch screen) COOLING & CHIP HANDLING High pressure coolant through spindle: 15 bar External flood coolant via spindle nozzles Hinged belt chip conveyor with side discharge Complete coolant system with pumps and filters AUTOMATION Automatic bar feeder included Automatic chuck open/close Chuck status feedback via sensors Giodpfjyg It Dsx Acwjr Automatic part transfer between spindles OTHER FEATURES Pitch error compensation (X, Z) 3D tool compensation Helical interpolation Polar coordinate programming Thread cutting (G33) Workpiece coordinate rotation User macro functions Tool breakage detection MACHINE DIMENSIONS & WEIGHT (approx.) Machine weight: 5,000 – 5,500 kg Machine footprint: approx. 2,600 × 2,000 × 1,900 mm

Condition: excellent (used), functionality: fully functional, High-Precision Leadscrew Lathe Schaublin 102N-VM Technical Data: >> Machine No. 283152 >> Centre height: 102 mm >> Centre distance: 450 mm >> Spindle bore: 25 mm >> Longitudinal feeds: 8 steps from 0.02 to 0.3 mm/rev >> Metric threads: 20 pitches from 0.25 to 4 mm >> Imperial threads: 25 pitches from 80 to 6 TPI >> Tailstock: Morse taper 2 >> Infinitely variable speeds from 270–3000 rpm >> Weight: approx. 700 kg Accessories: Gedpfowvq Tmjx Acwsir >> 3-jaw chuck, 2 sets of jaws >> Tool post with 6 tool holders >> Quick-clamping device, draw tube and 34 collets >> Coolant system >> Cutting tools, drill chuck (see images) >> Operating manual with spare parts list About the machine: For sale is a Schaublin 102VM leadscrew lathe in very good condition. The machine is, of course, fully functional. All slides operate smoothly and evenly. The 102VM runs quietly even at high speeds. The gear set for thread cutting is present, but is probably not complete. Take the opportunity to view and test the machine under power on site and see its good condition for yourself.

Condition: used, TECHNICAL DETAILS - center height : 102 [mm] - Max. diameter on bench : 200 [mm] Gjdpjw Ihttofx Acweir - Distance between centers : 470 [mm] - Type of spindle clamp : W20 - Boring : 20 [mm] - Passage of bar in clamp : 14.5 [mm] WEIGHT & DIMENSIONS - Machine floor space : 1500 x 800 [mm] - Machine height : 1300 [mm] - Machine weight : 500 [kg]

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 20194, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,500 mm, power: 49 kW (66.62 HP), Features Gsdpfxjx S Hgzo Acweir High rigidity for heavy-duty machining Large table for oversized workpieces CNC control with HEIDENHAIN TNC 530 for precision operations Automatic tool changer with 50 positions Centralized lubrication and hydraulic system

Condition: good (used), Center height: 102mm Distance between centers: 450 mm Spindle bore: 32mm reduction gear left.- Right running 2-stage drive Vario Speed: 270-3000 U / min knee circuit Turning diameter over bed: 200 mm Spindle nose: W 20 Tailstock: MK 2 Gedpfscpznhjx Acweir Dimension (LxWxH): approx 140x56x123 cm Weight: approx 550 kg Accessories available Guide available Different "Schaublin 102" models in stock!

Condition: used, centre height 102 mm centre distance 450 mm spindle bore 25 mm spindle speed: 220 - 2600 Gisdpfx Aewbi Hpocwsr Accessories were not checked for completeness Cabinets are not included in the scope of delivery

Condition: used, Year of construction: 1996, Technical details: grinding diameter: 1,5 - 75 mm grinding wheel diameter: 400 mm grinding wheel width: 160 mm work stroke: 0 - 1 mm working feed: stufenlos/ continous mm/min grinding wheel speeds: 1300 U/min control for program: Num 1020 GC total power requirement: 14 kW weight of the machine ca.: 3,8 t dimensions of machine: 3,0x2,2x2,2 m dimensions electric cabinet LxWxH: 1,5x0,4x2,0 m CIRCULAR GRINDING MACHINE - alloyed round steels as well as (grooving process) throughfeed process. - In the plunge process, the plunge-cut length is max. 160mm. - Workpiece removal automatically via rail (its function or operation is not known to WMW AG) - grinding wheel with reshaping device, speed = 1300 rpm. - regulating grinding wheel with reshaping device, infeed angle right 0-6° and left 0-2°; wheel size 280x160mm - automatic grinding wheel balancing system accessories: various grinding and regulating wheels on request The machine is operating in manual mode! The control is in the Catalan language and none of our employees can control the machine or understand the language. Giedou Ngyzjpfx Acwsr *

Condition: excellent (used), The used SCHAUBLIN 102N bench lathe is a small-sized Swiss precision manual lathe, 102mm center height, 400mm center distance, 20mm spindle hole. 2 similar machines available (one with short bed and quick tooling and the other with long bed and gear head); already complete with electrical panel and safety devices; equipment and conditions as per photo. Gjdpswqxcxefx Acwjir