Travelling column milling machine
SORALUCE FR-12.000

Name: SORALUCE FR-12.000
Brand: SORALUCE
Availability: InStock

Year of construction

1999

Condition

Used

Location

Germany

Travelling column milling machine SORALUCE FR-12.000

Machine data

Machine type:: Travelling column milling machine

Manufacturer:: SORALUCE

Model:: FR-12.000

Year of construction:: 1999

Condition:: used

Price & Location

Location:: , Germany

Call

Details about the offer

Listing ID:: A20516485

Reference number:: 2065-AY3000

Update:: 12.11.2025

Description

x-travel 12000 mm
y-travel 3600 mm
z-travel 1500 mm
spindle turning speed range 3000 U/min
Control: Heidenhain iTNC430
Milling head 2 axes, indexed 2.5°
Vertical (Y-axis): 3600 mm
Transverse (Z-axis): 1500 mm
Longitudinal (X-axis): 12,000 mm
Guide rail length: 14,700 mm
Guide rail width: 1400 mm
Lowest milling position of the spindle nose measured from the floor (head horizontal): 855 mm
Low column design 870 x 900 x 2,625 mm: 3,000 kg
High stand design 870x900x3,025 mm: 3,500 kg

Motor power: 37 kW
Mounting: ISO 50/ DIN 69871-A
Speeds: 11.7:231:3000 rpm

Feed range: 2:2500 mm/min
Rapid traverse
X-axis: 12000 mm/min
Z-Y axis: 15000 mm/min

Feed motor power
X-axis: 55 Nm
Z-axis: 37 Nm
Y-axis: 37 Nm

Accuracy
Positioning accuracy: 0.025 mm
Repeatability: 0.015 mm

Weight: approx. 42,000 kg

Air supply to the machine: 300 L/min at 4.5 bar

NOTE: The clamping plates and chip conveyors are not included in the scope of delivery.
However, we can offer you both used and new clamping plates and chip conveyors on request.
Nljdpexwdygjfx Acmoc

Seller

Registered since: 2007

878 listings online

Call

Send inquiry

Telephone & Fax

+49 2333 ... show

Fax:

These listings may also fit your interest.

Listing

Universal machining center DMG MORI HSC 75 linear

Oestrich-Winkel

1,181 km

Universal machining center
DMG MORIHSC 75 linear

Call

Condition: good (used), Year of construction: 2008, Universal Machining Center Machine type: DMG HSC 75 linear Control: Heidenhain i-TNC530 Year of manufacture: 2008 New spindle: 2025 Power-on hours: 63,133 h Spindle operating hours: 28,596 h TECHNICAL DATA: Travel distances: X-axis: 750 mm Y-axis: 600 mm Z-axis: 560 mm Feed rate (X/Y/Z): 90 m/min Rapid traverse (X/Y/Z): 90 / 90 / 90 m/min A-axis: -10° B-axis: +110° C-axis: 360° Spindle speed range: 28,000 rpm Tool changer Tool holder: HSK-A63 Tool stations: 60 Tool diameter: 80 / 140 mm Tool length: 300 mm NC rotary table: Ø 750 mm Max. table load: 800 kg Table size: fixed table: 950 x 650 mm Max. table load: 1,000 kg Equipment features: Chip conveyor Njdpfx Acjyq H Arjmjlc Internal coolant supply (IKZ): [bar] Oil mist extraction Tool breakage control: Blum Laser Measuring probe Mode of operation: 4 Electronic handwheel

See details

Listing

Verticlal machining center with 5 axis MIKRON UCP 600

Root

1,371 km

Verticlal machining center with 5 axis
MIKRONUCP 600

Call

Listing

Niederlangen

1,037 km

Section Bender
SCHÄFERSPVS 65 / 140

Call

Condition: used, Year of construction: 1990, I - beam section - flat steel 140 x 140 x 13 mm Nledpfxstt Ecds Acmsc I-beam section - upend 120 x 120 x 13 mm L-beam 130 x 130 x 12 mm round bar steel 85 mm bending capacity - flat iron 125 25 mm flat steel 65 x 65 mm including various rollers: Pipe Ø: 219 mm (tool/roller Ø 535 mm) 140 mm (tool/roller Ø 420 mm) 273 mm (tool/roller Ø 520 mm) 203mm 168.3 mm (tool/roller Ø 500 mm) 75 mm (tool/roller Ø 400 mm) 49 mm (tool/roller Ø 420 mm) 48.3 mm (tool/roller Ø 420 mm) 22.5 mm (tool/roller Ø 420 mm) 32/32.5 mm (tool/roller Ø 420 mm) 60 mm (tool/roller Ø 420 mm)

See details

Listing

Horizontal machining centre Niigata SPN 501-P8

Cuggiono

1,509 km

Horizontal machining centre
NiigataSPN 501-P8

Call

Listing

5-axis vertical machining center Deckel Maho DMF 220 LINEAR

Cascina Faustina

1,524 km

5-axis vertical machining center
Deckel MahoDMF 220 LINEAR

Call

Condition: ready for operation (used), Year of construction: 2007, operating hours: 17,000 h, functionality: fully functional, travel distance X-axis: 2,200 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 720 mm, rapid traverse X-axis: 100 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, controller manufacturer: HEIDENHAIN, controller model: I TNC 530, spindle speed (max.): 18,000 rpm, operating hours of spindle: 17,000 h, spindle nose: BT 40, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, 5-axis continuous mobile gantry vertical machining center, with rotary table (capable of both horizontal and vertical mounting) with a diameter of 550mm. Possibility of pendulum machining (pallet changer type) with dedicated partition. Equipped with BLUM laser control NT tool presetting. Wireless part probe HEIDENHAIN TS 642. Belt-type chip conveyor. High-pressure through-spindle cooling with paper filter. Spindle chiller. Remote HEIDENHAIN handwheel. Njdpfoy Diabsx Acmolc

See details

Listing

2010 Mazak Integrex 300 IV Mazak Integrex 300 IV

Eskilstuna

1,651 km

2010 Mazak Integrex 300 IV
MazakIntegrex 300 IV

Call

Condition: used, Year of construction: 2010, Mazak INTEGREX 300-IV – Technical Data Year of manufacture: 10/2010 Model according to nameplate: INTEGREX 300-IV Serial number / Ass. No.: 221788 Power on time: approx. 50 000 hours General Machine Data Machine type: Turn-mill center Control: Mazatrol Matrix Nodpfxsyxm S Ro Acmslc Chuck: Kitagawa B-212 (12”) Max. turning diameter: approx. 762 mm Max. machining length: approx. 1524 mm Bar capacity: approx. 76 mm Main spindle speed: 4,000 rpm Second spindle speed: 4,000 rpm Milling spindle speed: up to 12,000 rpm Tool magazine: 40 stations C-axis: 0.001° B-axis: 0.001° indexing X-axis travel: approx. 630 mm Y-axis travel: approx. 230 mm Z-axis travel: approx. 1585 mm Main power supply: 3 AC, 400 V, 50/60 Hz Control circuit: AC 100 V / DC 24 V Max. current: 80 A

See details

Listing

Hurco TMX8MYS, (direct sale to customer) HURCO Hurco TMX8MYS, Bj. 2011

Hallein

1,627 km

Hurco TMX8MYS, (direct sale to customer)
HURCOHurco TMX8MYS, Bj. 2011

Call

Listing

Bed milling machine STYLE CNC Machines BT 4000 (XYZ:4000x1000x1000 mm)

Bunschoten-Spakenburg

924 km

Bed milling machine
STYLE CNC MachinesBT 4000 (XYZ:4000x1000x1000 mm)

€249,000

Fixed price plus VAT

Call

Condition: new, Year of construction: 2025, operating hours: 1 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: STYLE CNC Machines, number of slots in tool magazine: 24, motor manufacturer: FANUC, Delivery after consultation Ref: 24F048 Year of construction: 2025 Condition: Showroom Specifications: - X-axis: 4000 mm Nljdpfjw Ty S Sox Acmjc - Y-axis: 1000 mm - Z-axis: 1000 mm - 26 kW (S6) main motor - 8000 rpm - BT-40 - Automatic tool changer (24 positions) - Remote service (IXON) + network connection - Stronger coolant pump incl. spray gun - Upgraded to the latest STYLE software available

See details

Listing

Travelling column milling machine Mecof MASTERMILL

Torbole Casaglia

1,585 km

Travelling column milling machine
MecofMASTERMILL

Call

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,600 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, spindle speed (max.): 6,000 rpm, table length: 2,500 mm, table width: 2,000 mm, table load: 30,000 kg, spindle motor power: 38,000 W, rotary table diameter: 2,000 mm, feed length W-axis: 1,500 mm, Equipment: rotational speed infinitely variable, CNC travelling column milling machine MECOF EMCO mod. MASTERMILL-HPC3 Heidenhain iTNC 530 CNC control X axis 4,000 mm Nledpowzxiyefx Acmjc Z axis (vertical) 3,000 mm Y axis (cross) 1,600 mm Ram section 500 x 500 mm Rapid feeds 30,000 mm/min Rotary-translating table 2,000 x 2,500 mm Table load capacity 30,000 kg Translation 1,500 mm Continuous rotation and translation Automatic bi-rotary head with 360,000 positions A axis 0.001° B axis 3° Spindle taper ISO 50 Maximum speed 6,000 rpm Spindle power 38 kW Tool changer with 80 positions Complete with: - Renishaw tool measurement system - Internal high-pressure coolant 20 bar - Chip conveyor

See details

Listing

LEVIBRETON ONE surface sanding machine Breton LEVIBRETON ONE

Kiel

1,208 km

LEVIBRETON ONE surface sanding machine
BretonLEVIBRETON ONE

€21,250

ONO plus VAT

Call

Condition: good (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,000 mm, power: 13 kW (17.68 HP), It is a LEVIBRETON ONE, surface sanding machine Nljdpferpi E Ajx Acmsc The machine has a wobble head and a 750mm diameter grinding disc. The machine can be used to polish the surfaces of hard stone and soft stone (marble). polished, satinized and bush-hammered with the appropriate tool.

See details

Advertise here