Lathe

SCHAUBLIN 102 N

Condition: good (used), functionality: fully functional, Precision lathe, make SCHAUBLIN, type 102 N 80 Kwodpeycczbofx Adtot No.: BL 280280 Technical data: Data: Center distance approx. 400 mm Center height 102 mm Spindle bore 26 mm Speeds see speed diagram Width x depth approx. 1.3 x 0.5 m Machine weight approx. 0.4 tonnes

Condition: excellent (used), Year of construction: 2012, travel distance X-axis: 2,600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 700 mm, rapid traverse X-axis: 40,000 m/min, rapid traverse Y-axis: 40,000 m/min, rapid traverse Z-axis: 40,000 m/min, table width: 750 mm, table length: 2,900 mm, table load: 2,150 kg, X - Travel: 2600mm Y - Travel: 700mm Z - Travel: 700mm A - Axis: 360000° B - Axis: - 110 to + 110° Table Length: 2900mm Table Width: 750mm Table load: 2150 Table Ø: 750mm Feed rate X-Axis: 40000mm/min. Feed rate Y-Axis: 40000mm/min. Feed rate Z-Axis: 40000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 35kW Speeds / ranges: 18000Rpm ATC / revolver: 30 Coolant through spindle / Bar:20 Number of controlled axis: 5 Chip conveyor: Yes Coolantsystem: Yes Length: 8400mm Kwodpoxuqv Asfx Adtjt Width: 3423mm Height: 2620mm Weight: 16000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), functionality: fully functional, High-Precision Leadscrew Lathe Schaublin 102N-VM Technical Data: >> Machine No. 283152 >> Centre height: 102 mm Kwjdowvq Tmepfx Adtet >> Centre distance: 450 mm >> Spindle bore: 25 mm >> Longitudinal feeds: 8 steps from 0.02 to 0.3 mm/rev >> Metric threads: 20 pitches from 0.25 to 4 mm >> Imperial threads: 25 pitches from 80 to 6 TPI >> Tailstock: Morse taper 2 >> Infinitely variable speeds from 270–3000 rpm >> Weight: approx. 700 kg Accessories: >> 3-jaw chuck, 2 sets of jaws >> Tool post with 6 tool holders >> Quick-clamping device, draw tube and 34 collets >> Coolant system >> Cutting tools, drill chuck (see images) >> Operating manual with spare parts list About the machine: For sale is a Schaublin 102VM leadscrew lathe in very good condition. The machine is, of course, fully functional. All slides operate smoothly and evenly. The 102VM runs quietly even at high speeds. The gear set for thread cutting is present, but is probably not complete. Take the opportunity to view and test the machine under power on site and see its good condition for yourself.

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, machine/vehicle number: 310435, Completely overhauled - new painting New workbench - new geometry Manufacturing origin Swiss Voltage 380V 50Hz 3Ph Kwsdsdr R Tcspfx Adtst Customs position 8458.1930 TECHNICAL DATA Capacities : - height of centres 102 mm - distance between centre, standard headstock type W 470 mm - distance between centres, headstock type W with reduction unit 375 mm - swing over bed 200 mm - swing over carriage 120 mm Bed : - height-width-length 168-100-1000 mm cast-iron bed with ground inverted-V profile Headstocks : - spindle nose for collets W-25 - maximum bore through collet 19.0 mm - headstock with reduction unit, ratio 1:5 Carriages : - stroke of longitudinal tool slide 90 mm - stroke of transverse tool slide 100 mm - size of tools 12x12 mm Tailstocks : - internal taper of tailstock spindle Morse 2 - spindle stroke, screw- and handwheel-operated 80 mm errors and omission excepted-data given without obligation Inventory Nr.2210049, machine equipped with : - 1 workbench NEW 2000x800 mm with Urphen platte blue 2000x800x50 mm      1 foot, 1 cabinet B750 with 7 drawers 1xD50/2xD75/2xD100/1xD150/1x200 1 bed for overhead drive 1 W-20 headstock without gear reduction and drawbar, revised 1 revised screw-operated carriage 1 revised aligned tailstock 1 motor 380V/50Hz/3ph. 2 speed 1 set of collets W20 1 chuck 2x3 jaws Ø 100 mm on w-20 flange 1 new set of Multifix tool holders including - 1 turret Multifix A with AG20 stud - 3 tool holders AD1675 - 1 bar holder AH2085 1 self-tightening drill chuck cap 1-13 mm on MT2 stud 1 male center MT2 OPTION 1 used tensioner with new belt CHF 500 + VAT 1 AS TYPE B-8 GRINDING MACHINE with 360° swivel quill max. speed 28,000 rpm, adjustable height, adjustment, ref. 800053 CHF 1,325 + VAT

Condition: used, Year of construction: 1955, Technical details: turning diameter over bed: 420 mm turning diameter over support: 240 mm turning length: 1100 mm turning dia. in gap: 600 mm range of revolution per miute: 24 - 900 / 8 step U/min spindle bore: 41 mm range of feed in x - axis: 0,0120 - 0,1000 mm/U range of feed in y - axis: 0,0062 - 0,0302 mm/U tailstock quill taper MT: 3 tailstock quill adjustment: 220 mm total power requirement: ca. 4,0 (ohne Gewähr) kW weight of the machine ca.: 1,2 t dimension machine xH: 2,3 x 0,9 x 1,3 m Equipment: 3-jaw chuck Ø 200mm Tool holder 4-way, swivelling 30° right/left T-slot for copying device Driving disc Kwsdpfx Adeu Ix D Aotot *

Condition: excellent (used), Year of construction: 2005, Schaublin 102N-VM-CF high precision Swiss lathe Year: 2005 max. admitted diameter over the bed 200 mm max. admitted diameter over the slides 120 mm Height of centers 102 mm Distance between centers 450 mm Bed length 1000 mm Bed height 168 mm Power 4.2 KW Spindle speed 100 - 3000 RPM Spindle W25 Transverse stroke, X axis 100 mm Resolution, X axis (radius) 0,01 mm Longitudinal stroke, Z axis 90 mm Resolution, X axis (radius) 0,01 mm Lead screw - 8 longitudinal feeds - Larger feeds possible when using the thread control for turning Max. cross section of tool shank (Multifix system) 10x10 mm Bar holder (MULTIFIX system) diameter 20 mm Height and side-adjustable tailstock: Internal taper of the sleeve Mk2 Spindle OD 30 mm Spindle stroke 80 mm Coolant tank capacity 23 L Electrical power supply voltage 400 V Overall dimensions: length x depth x height: 1500 x 510 x 1550 mm Accessories / options: - ACU-RITE digital readout unit, 3 axis X-Z-Z1 Kwsdpfxjw N Rh As Adtet X resolution 0.001[mm] Z resolution 0.005[mm] Z1 resolution 0.005[mm] - Coolant system - Rear sheetmetal guard - Double Start/Stop pedal and spindle rotation direction inversion - Schaublin W25 collet set - Cast iron chuck W25 Ø110[mm] with jaws - Quick-change toolholder turret MULTIFIX-A with holders - Driving system for auxiliary equipment with BELT adjustable and swivelling belt-tensioning attachment drive device complete with motor belt Ø6x2’500[mm] - Tailstock - etc... Under power in our warehouse.

Condition: used, Schaublin 102-N80 Swiss precision lathe Technical details: Center height: 102mm Distance between centers: 450 mm Spindle bore: 32mm reduction gear left.- Right running 2-stage drive Vario Speed: 270-3000 U / min knee circuit Turning diameter over bed: 200 mm Spindle nose: W20 Tailstock: MK 2 Dimension (LxWxH): approx 140x56x123 cm Weight: approx 550 kg Ksdpfsxxavgjx Adtswt Accessories/options: - 3-jaw chuck with jaws - 4-jaw chuck with jaws - tool holders - Schaublin collets from 0,5mm Under power in our warehouse.

Condition: as good as new (ex-display), Year of construction: 2013, operating hours: 1,265 h, functionality: fully functional, spindle speed (max.): 20,000 rpm, turning diameter: 4 mm, Equipment: documentation/manual, rotational speed infinitely variable, Citizen R-series of automatic lathes dedicated to small-diameter machining. This machine is used very little (15800 parts cut). model year 2013. With ASP-04 barfeeder. Kwsdpovtancjfx Adtjt VAT is not needed if the sales happen outside of Turkey.

Condition: good (used), Center height: 102mm Distance between centers: 450 mm Spindle bore: 32mm reduction gear left.- Right running 2-stage drive Vario Speed: 270-3000 U / min knee circuit Kwedpfx Aocpznhsdtst Turning diameter over bed: 200 mm Spindle nose: W 20 Tailstock: MK 2 Dimension (LxWxH): approx 140x56x123 cm Weight: approx 550 kg Accessories available Guide available Different "Schaublin 102" models in stock!

Condition: used, Workspace Tip height 102 mm Centre width - with normal headstock 450 mm - with reduction gear headstock 375 mm - over the cheek 200 mm - over the slide 120 mm Headstocks spindle nose for collets type Schaublin W25 spindle bore 25 mm Collet bore 20 mm Reduction ratio of the gearbox 1:5 Cheek Height x width x length 168 x 130 x 1000 mm cast iron cheek, trapezoidal profile like lathe 102 N and dovetail guide hardened and ground. Slide Largest travel on the cheek 400 mm Tool slide width - length 80 - 194 mm Path manual adjustment 90 mm Center height above tool slide 20 mm Shaft of the lathe tools 12 x 12 mm cross slide width - length 94 - 300 mm Path manual adjustment 100 mm Bed slide length of the guide on the cheek 250 mm Lead screw Guiding spindle for longitudinal turning and threading, Ø 40 mm Lead screw hardened, thread ground, pitch 4 mm Speed range Speed 270 - 3000 rpm Longitudinal turning 0.02 - 0.3 mm/rev. Thread cutting Largest pitch with standard change gear set 4 mm Machine plate for 20 metric pitches 0.25 - 4 mm Kedpobxkl Tefx Adtswt Machine plate for 25 english pitches 80 - 6 G/" Tailstock Diameter of the quill 30 mm Inner taper of the quill 2 MORSE Distance of the quill 80 mm Cooling device Coolant tank - capacity 23 litres Net weights Lathe on workbench, approx. 225 kg Lathe on box base, approx. 550 kg

Condition: good (used), Morsoe mitre guillotine, in good condition, immediately available. Kwsdpfxeh Aka Ie Adtjt If interested, we are also happy to provide information about other machines available at our facility. You are welcome to inspect the machine at our premises by prior appointment.

Condition: used, centre height 102 mm centre distance 450 mm spindle bore 25 mm spindle speed: 220 - 2600 Kjdjwbi Hpepfx Adtowt Accessories were not checked for completeness Cabinets are not included in the scope of delivery

Condition: good (used), Center height: 130 mm Distance between centers: 450 mm Speed: about 55-3000 U / min Pneumatic clamping system Spindle nose: W 25 Div. W25 collets available Div. holder available BERGER LAHR axis motors Combitec EIP E-500 Control Manual control available Coolant system available Machine lamp available Machine feet Available Dimension (LxWxH): approx 1400x560x1230 mm Weight: approx 550 kg Different "Schaublin 102" models in stock! Kwjdpfocuhvuox Adtot

Condition: like new (used), Year of construction: 2014, travel distance X-axis: 8,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 2,200 mm, 1 as-new CNC travelling column bed milling machine Brand: Soraluce Model: FL 8000 Year of manufacture: 2014 Control: Siemens 840 D Solution Line Technical data: Travel X-Y-Z: 8000 x 1300 x 2200 mm C-axis travel: 360 degrees Table clamping area: 6000 x 2000 mm Tool holder: SK 50 Capto C8 Spindle speed up to: 4000 rpm Main drive: 43 kW Rapid traverse: 35 m/min CNC rotary table: 1600 mm, 250 rpm Weight approx.: 40 t Equipment / Accessories: Tool magazine CNC-controlled universal milling head Kjdswzx Ntspfx Adtewt Chip conveyor Full enclosure Complete coolant system Electronic handwheel Internal coolant supply (IKZ) Indexing clamp Rotary carousel table D=1600 mm, 250 rpm Table area 6000 x 2000 mm Face slide, etc.