Used Worm Hackers for sale (318)

Condition: like new (used), Year of construction: 2019, FACTORY REFURBISHED NEWLAND MTC3XX MULTI-STAGE TELESCOPIC CONVEYOR ON DOCK MOUNTED FIXED CHASSIS. - Telescopic travel 15,250 mm - Closed length 7,230 mm - Without Droop Snout arrangement. 7,900 mm - With Droop Snout in fully raised position. - Overall extended length 22,480 mm - With Droop Snout in horizontal position. - Closed length 7,230 mm - Overall length 22,480 mm - Belt width 600mm - Floor to top of belt height 940mm - Belt type Smooth top 2 ply PVC with vulcanised joint - Belt speed 30m/min - Programmable - Belt drive ABB 2.2 kw motor with shaft mounted worm reduction gearbox. - Telescopic drive ABB 1.1 kw motor with shaft mounted worm reduction gearbox - Belt direction Reversible - Loading 50 kg/m - Drive unit position External Dodpfx Asu E Rkpsf Iowd - Control panel Eldon Steel Enclosure IP65 - Switchgear Group Schneider (Formerly Telemecanique) With CAT3 safety circuit relay - Control panel door - Power 'On' light - Overload trip light - E-Stop activated light - E-Stop Push button re-set - Power supply 400v-3ph-50Hz - Controls Push button controls mounted on the front of the telescopic boom. Emergency stop to halt all functions fitted to the front of the telescopic boom and both sides of the fixed main boom - Control voltage 24 volts DC - Paint color Newland standard color Light Blue Main body-18E51 Dark Blue Chassis-20D45 ADDITIONAL FEATURE TO BE INCLUDED: 1. Droop Snout Length: 1,600 mm Belt width: 600 mm Belt Type: 2 Ply PVC Gripface Motorised hydraulic height adjustment Please note: The telescopic extension of the MTC is reduced by 1,220 mm. The Droop Snout compensates for this reduction when it is lowered into operating position. The machine closed length is increased by 670 mm with Droop Snout in raised position.

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, Manual high-performance metal bandsaw with selectable manual or hydraulic saw frame lowering. In autonomous mode, the lowering speed is continuously adjustable via the “Push&Pull” controller. By pulling the controller, the frame maintains the previously selected speed, removing the need to reset it for the next cut. Standard Features: - Saw frame made of a robust cast construction - Heavy-duty round table with cutting channel for mitre cuts from 0°–60° to the right and 0°–45° to the left - Movable vise with adjustable guide rails and quick-release lever for repeat cuts - Oil-bath reduction gearbox with bronze gear and hardened, ground steel worm - Electric coolant pump for band lubrication and cooling - Mechanical bandsaw blade tensioning with electrical blade tension monitoring - Precise blade guidance via adjustable, ground carbide plates and ball bearings - "Push&Pull" controller for adjusting the lowering speed - Rotating swarf removal brush - Precision angle scale for angles from 60° right to 45° left - Control panel with ready-to-operate indicator, main/speed selector switch, and switch for manual or autonomous lowering mode - Emergency stop button at knee height for optimal accessibility - Microswitch in the handle for starting motor and pump (dead-man function in manual mode) - Safety switch on the saw frame guard and blade tensioning carriage - Limit switch for automatic motor shutoff after cutting - Length stop for repeat cuts - Material support on the infeed side - Bi-metal saw blade - Tools and user manual Technical Data: - Pole-changeable 400 V three-phase motor, 1.1/1.5 kW - 2 cutting speeds (33/66 m/min) - Vise clamping width: 305 mm - Working height: 940 mm - Saw blade dimensions: 2750x27x0.9 mm - Weight: 380 kg Dwodpfx Asxcnqasf Iod Cutting capacity in mm: 90° 255 250x250 300x200 45° R 190 180x180 190x170 60° R 110 110x110 150x110 45° L 160 140x140 170x120

Condition: like new (used), functionality: fully functional, machine/vehicle number: FDL-150-100E/NC, total length: 1,200 mm, pressing force: 150 t, table width: 800 mm, working height: 600 mm, clearance between the columns: 1,250 mm, Equipment: documentation/manual, safety light barrier, DOUBLE-COLUMN HYDRAULIC PRESS WITH TWO SIDE CYLINDERS FOR PRE-PRESSING AND PRESSING OF ROTORS AND STATORS, AND A CENTRAL CYLINDER FOR ROTOR SHAFT EXTRACTION, AS WELL AS FOR SHAFT EXTRACTION IN CASE OF REPAIR It features an extendable table for stacking and handling rtors and stators. It meets and satisfies all essential safety and health requirements according to CE regulations. STRUCTURE AND TABLES • Consists of a rigid fixed bench welded structure made exclusively from S355JR steel. • Stabilized and machined at the end of the welding process to ensure perfect parallelism and precision. • Calculated and designed using finite element software. • Mechanically movable grooved table measuring 1200 x 800 mm with a stroke of 1,200 mm, equipped with a worm gear reducer and a 0.5 HP electric motor with brake. • Central drill on the table with a diameter of 250 mm and a maximum depth of 550 mm. • Useful lifting capacity of the table for moving 4 tons. • Movement speed of 30 mm/sec. • Front interior width of 1250 mm (space between columns). • Working height of 600 mm. MAIN CYLINDERS: 150 TN • Two 75-ton hydraulic cylinders (150 tons total), with a stroke of 1200 mm connected by a plate with a central hole of 250 mm in diameter. • Maximum useful height of the cylinder plate: 1,440 mm. • Minimum useful height of the cylinder plate: 200 mm. ABSTRACTION CYLINDER • One 100-ton central cylinder with a stroke of 1200 mm. • Designed to accommodate an abstraction clamp, end of the rod threaded to M 35.150 x 40 mm length. Djdowpg Awjpfx Af Ijwd • Maximum useful height of the abstraction cylinder: 1600 mm from the root of the rod thread. • Minimum useful height of the abstraction cylinder: 400 mm from the root of the rod thread. HYDRAULIC GROUP • Two-speed hydraulic group with 5.5 HP power “Siemens Motor”, with automatic disconnection of high speed and independent speeds. Maximum pressure: 250 bar. • Pressure regulation system using proportional valves. • Air-oil cooler. • Temperature sensor. • Hydraulic group located on the right side. ELECTRICAL INSTALLATION AND SAFETY • Equipped with a SIEMENS mod. SIMATIC S7 1200 safety PLC and a 12” HMI touchscreen mod. MTP with 99 memory slots allowing adjustment of pre-pressing power, pressing, calendering, and stroke of the pressing and extraction cylinders, as well as the holding times during processes. • Electrical and hydraulic maneuvers are redundant and self-controlled. They include an additional safety block and self-control devices for operation and safety. Includes verification and certification of correct operation and safety distance for photoelectric cells. • The electrical panel includes a selector for choosing the type of work in manual, semi-automatic, or automatic position and a selector for high-speed or low-speed operation. • Operation is performed via a two-hand low-voltage electrical pushbutton. • All installed electrical materials are Siemens, including relays, contactors, main motor, etc. • Ready for Industry 4.0. • To ensure safety, it includes category IV photoelectric barriers located in the front work area, two fixed side guards, and a practicable rear guard with a magnetic disconnection detector.

Condition: used, Year of construction: 2025, The CORMAK BS 260G band saws, due to being equipped with a hydraulic cylinder, a cooling and an arm swivelling up to 60°, together with blades from renowned German Röntgen company, are used commonly in ironworking where precision, quality and cutting speed are important. Horizontal band saw with a swivelling arm for cutting metals, allows for cutting in plane perpendicular to the axis of material cut and at any angle from 0 to 60º. Material for cutting can be fed manually or by any mechanical feeding device, with automatic tool feed. Band guides are equipped with dedicated carbide plates and bearings. This has a huge impact on band guiding, its durability, cut straightness, cutting accuracy and quality. Machine's arm is made of profiled CAST IRON. Control panel is located by the arm. The drive from the electric motor directed to the cutting band driving wheel is transmitted by a motor with worm drive. The cutting band is tensioned on two cast iron wheels with a manual tightener and guided by adjustable rolling and linear set of carbide guides. A separate flood coolant container with an electropump is inside. The arm lowering speed (the cutting speed) is adjusted with a hydraulic cylinder. The feed speed is controlled by the control panel. There are 2 cutting band speeds to choose from: 36 and 72 m/min. In rest arm position (after the cutting process) the cutting band drive is switched off automatically. Safety is ensured with cutting band guards and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened; additional protection consists of automatic switch-off of the band saw in case the cutting band breaks. Technical data Cutting band saw dimensions 2455×27×0.9 mm Band tension mechanical (manual) Band speed 36, 72 m/min Feed speed 0–50 m/min (stepless feed) Arm lowering control stepless – hydraulic cylinder Vice base height 900 mm Power supply 3-phase 400V Motor power 1.1 kW Weight 216 kg Dwsdpoxn Itrjfx Af Ijd Warranty 12 months Manual yes CE declaration yes Angle 0º ø230 260×150 225×225 45º ø165 180×130 165×165 60º ø105 100×90 110×110 *Please note that machine is sold without CEE connector by default, since there are many different types of it. If you would like to receive it with the machine, please write it to the seller before making a purchase/during order proceeding. WARNING! THE MACHINE IS RETURNED, SERVICED, NO PACKAGING.

Condition: good (used), Hacker feed roller, conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Feed roller: serrated -Roll diameter: 270 mm -Transport roller width: 626 mm -Total length: 626 mm -Shaft mount: 80 mm -Quantity: 1x piece available -Weight: 137 kg Dedpedl E Iiofx Af Ijwd

Condition: good (used), Smicon FTA 1500U-6L fumigation / gassing system In a fumigation, a room is flooded with a poisonous gas to fight pests / bacteria. Because they are toxic gases, special safety measures are required. Fumigations are common in the storage of organic materials (eg grain storage, in warehouses of harbors, silos, mills), in addition, in churches to control the woodworm. It is a device which is used for the disinfection of rooms. Formaldehyde is boiled on the left-hand cooking plate and placed in a stream of air in a room together with condensed water (right hearth) to kill all the bacteria. Dedpfxsdviyxo Af Iewd Former list price 9,900 € Item condition: used More articles - new and used - can be found in our shop! International shipping costs on request!

Condition: excellent (used), Year of construction: 2006, Type: AV250 Serial number: 06090-1 Year of construction: 2006 Hole plate diameter: 250 mm Hopper: 800 litres Power: 3 x 400V, 50Hz, 78kW Dimensions: 1650 x 1700 x 2400 mm Weight: 1750 kg 3 speeds on feed screw, 2 speeds on working worm Djdottzdqopfx Af Iowd

Condition: used, Year of construction: 1983, max. wheel diameter 1800 mm gear width 000 mm max. module 18 axial slide travel 1000 mm distance - table - arm of counterstay 1800 / 1467 mm milling spindle - taper SK 55 diameter of hob 300 mm width of hob 375 mm axis distance between spindles 100 - 1060 mm milling slide swivelling 240 Grad table diameter 1200 mm table hole 300 mm taper MK 6 min. number of teeth 9 turning speed - milling spindle 20 - 150 U/min Dwsdpfov Saw Ijx Af Ied feeds axial 1 - 1000 mm/min radial feed 1 - 300 mm/min tangential feed 1 - 225 mm/min electrics - voltage/frequency 380 / 50 V/Hz control Sinumerik 3 M total power requirement 69 kW weight of the machine ca. 26,5 t dimensions of the machine ca. 8,0 x 4,0 x 5,6 m Suitable for straight and helical gears, cylindrical gears and worm gears. profile milling attachment turning speed programme electronic handwheel

Condition: used, functionality: fully functional, pressing force: 150 t, pressure: 250 bar, Double-column hydraulic press equipped with two side cylinders connected by a platen for the pre-pressing and pressing of rotors and stators, and a central cylinder for the extraction of the mandrel and fitting of the rotor shaft, as well as shaft removal during repair operations. Features a retractable table for stacking and handling rotors and stators. MAIN CYLINDERS 150 t - 2 hydraulic cylinders of 75 t each, with a stroke of 750 mm, joined by a slotted platen with a central bore of 250 mm diameter. - Maximum usable height between cylinder platens: 1,300 mm. - Minimum usable height between cylinder platens: 550 mm. EXTRACTION CYLINDER - 1 central cylinder of 80 t, with a 1,200 mm stroke. - Prepared to fit an extraction clamp; rod end threaded M 35 x 1.50 pitch, 40 mm length. - Maximum usable height of extraction cylinder: 1,300 mm to the root of the rod thread. - Minimum usable height of extraction cylinder: 100 mm to the root of the rod thread. Djdpfsxc Ekdox Af Iowd TABLE AND STRUCTURE - Mechanically movable slotted table, 1,200 x 800 mm, with a 600 mm stroke, fitted with a worm gear reducer and 0.5 HP electric motor with brake. - Central bore on the table: 250 mm diameter; max. depth 550 mm. - Effective lifting capacity of the table for movement: 4 t. - Table traverse speed: 2,600 mm/min. - Internal front width: 1,250 mm. - Working height: 600 mm. HYDRAULIC POWER UNIT - Two-speed hydraulic unit, 5.5 HP, with automatic disengagement of rapid speed and independent speeds. Maximum pressure: 250 bar. - Digital control for maximum force during pre-pressing, pressing, and fitting; digital tonnage display. Pressure adjustment system via proportional valves. - Selector for approach and measuring speeds.

Condition: used, Year of construction: 2025, Band saw for metal, with optimal cutting range, commonly used in carpentry, production and craft facilities. Machine description Universal CORMAK BS 712 A band saw with CE marking is a trusted solution for metal cutting, unparalleled for years. Features high efficiency and easy handling. Makes it possible to cut in vertical plane and perpendicular to the cut material axis, or at any angle in 45°–90° range. Element cut can be fed manually or by any feeding device. The feed during cutting is gravitational on the principle of oil flow in a two-chamber hydraulic cylinder. Suitable speed of arm lowering is obtained thanks to the valve controlling oil flow between the hydraulic cylinder chambers. Required band linear velocity is obtained by changing the ratio on the belt pulley between the worm gear and the driving motor. Dedewl Ea Topfx Af Iewd Rugged, stable and refined construction as well as the arm made of uniform cast iron provide high rigidity and stability while cutting, ensuring accuracy and long-term reliability. The design of the 20 mm saw blade used in the machine makes it possible to cut large quantities of elements. Technical data Cutting band size 2360×27×0.9 mm Band tension mechanical (manual) Band speeds 22, 33, 45, 65 m/min Feed speed 0–50 m/min (stepless feed) Arm lowering control stepless – hydraulic cylinder Power supply 3-phase 400V Main motor power 1.1 kW Weight 190 kg Angle 0°.....180 mm....300×180 mm.....180×180 mm 45°.....130 mm....120×125 mm.....125×125 mm Machine construction Cutting band transmission system is composed of two cast iron wheels. The first wheel is a tensioning wheel (adjusted with a lever) and the second one is a drive wheel. Torque from the worm gear is directly transmitted to the tensioning wheel, while the worm gear is driven by an electric motor. Appropriate band angle is ensured through a set of roller bearings. The base of the machine is a rigid cuboid made of steel sheets inside which is a cooling fluid container with a flood coolant pump. Due to swivel vice it is possible to cut material at 0°–45° angles. Tank for flood coolant draining and a container for chips are fixed to the upper part of the machine. Cast iron workbench is attached to the tank, which in turn is equipped with a vice for material clamping and to which the arm of the band saw is fixed. In the lower part of the machine base are holes for wheel axles. Safety during cutting process is ensured by an electric installation meeting all CE requirements. The machine is equipped with a limiting switch that stops the machine after cutting process is finished, an emergency button, a number of microswitches that switch the machine off when, e.g., the belt transmission guard or cutting band guard are opened. Additionally, our machine, as opposed to competitors, is equipped with a wire brush for band cleaning – it prevents the blade from blocking and ensures a more effective cutting. WARNING ! 3 ITEMS AVAILABLE: 1. MACHINE IS RETURNED, SERVICED, ASSEMBLED (poz.519) 2. MACHINE IS RETURNED, NO PACKAGING, DENTED MOTOR COVER ,COMPLETE, ASSEMBLED (poz. 518) 3. MACHINE IS RETURNED, NO PACKAGING, DENTED MOTOR COVER AND BELT COVER, ASSEMBLED (poz. 517)

Condition: used, Manufacturer: PFAFF Type: HSE63 Max. lifting force: 50 kN Max. tension: 50 kN Dwjdpfx Ajugty Hef Isd Screw torque at max. lifting force: 190 Nm Max. permit. torque on the drive shaft: 168 Nm Screw: M16 Worm gear with oil lubrication Oil amount: 0.7 l Hub: 850mm The indicated price refers to 1 piece.

Condition: new, Year of construction: 2018, Thyssenkrupp Velino xtra Escalator Escalator Description Manufacturer: Thyssenkrupp Model: Velino xtra FT 923 Type: 5 EK 30 Year of Construction: 2018 General: Travel height: 4.129 m Step width: 1.000 m Step length: 0.203 m Handrail length: 2 x 24.967 m Nominal speed: 0.5 m/s Incline angle: 30°C Number of steps that can be used simultaneously: 24 Total number of steps: 58 Safety features: Start-up switch, up/down, top, bottom Emergency stop switch, top + bottom Handrail retraction switch, right + left, top + bottom Chain tension monitoring switch, right + left Speed monitoring Phase control device Control cut-out switch, top + Below Thermal motor protection switch Brake function monitoring Handrail speed monitoring Fault step monitoring Cover plate switch Drive: Single drive with duplex chain reduction Motor make: emod Motor type: 5CNR112L/4-20 Motor power: 7.5 kW Rated speed: 1500 rpm Connection voltage: 230/400 V Gearbox type: auma FTS 125 worm gear Covering: Interior: Glass balustrade Exterior: Galvanized sheet steel The escalator was manufactured in 2018 and has never been used. Item location: Bottrop Availability: 4 units Dodpfx Afew Hcvuo Iewd Disassembly and removal by buyer. Disassembly by us is also possible for an additional charge. You can find more items - new and used - in our shop! International shipping costs on request!

Condition: used, Year of construction: 2022, Overview  This Meat Grinder was manufactured in 2022 by the Slovakian company PSS Svidník, a.s.. The machine is still in excellent condition and is immediately available. It is suitable for gentle and efficient grinding of fresh and pre-cut frozen meat down to –10 °C. The machine achieves high output with great cutting results and is built for robust and hygienic food industry applications. Technical Data  Capacity: Fine grinding: up to 1,750 kg/h Coarse grinding: up to 2,200 kg/h Grinding system: Single grinding worm Hopper volume: 84 L Grinding set diameter: 130 mm Grinding worm motor power: 11 kW Feeding worm motor power: 1.5 kW Weight: 560 kg Dimensions (L x W x H): 1,340 mm × 753 mm × 1,110 mm Material processed: Fresh meat and pre-cut frozen meat (≥ fist-sized, up to –10 °C) Construction: Stainless steel, polished surfaces for maximum hygiene Dwsdpfewugxvjx Af Ijd

Condition: good (used), Gearbox, spur gear, angle gear, worm gear -Manufacturer: Bonfiglioli, gearbox type MVF 49/A -Translation: i= 60 -Hollow shaft: Ø 25 x 80 mm / Ø 14 x 32 mm Dwsdpfx Ajt Iyunsf Isd -Dimensions: 135/160/H210mm -Weight: 3.2 kg

Condition: new, Gleason-Pfauter 0/360.10.133.01 worm wheel with 0/360.10.133.02 worm shaft, unused in opened original packaging, 100% functional, scope of delivery as per photos ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Dedpfxjqdm Nce Af Iowd

Condition: new, Year of construction: 2024, 2 x New worm pumps type NM038BY01L06B Min flow rate: 1.5 m3/h at 2 bar and 65 rpm Max flow rate: 8 m3/h at 2 bar and 341 rpm Rotor: Chrome steel hardened Stator: Nemolast®O62L IFD 2.0 Dodpfovtmh Nsx Af Ijwd Seal: uNS-Seal 100 Q1QVGG Drive: NORD SK20-100LP/4 Motor: 3 kW 230/400 V I ratio: 6.86 The stated price is per piece

Condition: used, Worm gear, bevel gear Manufacturer: Sew-Eurodrive Type: DFY112ML/TH Output speed: 1400 rpm Torque: 24 Nm Power: 6.6 kW IP65 Voltage: 50 Hz V 230/400v Power consumption: A 49.50/16.50 Dsdpoudywgsfx Af Iewd Speed: 3000 rpm Gear ratio (i): 27.88:1 weight: 36 kg

Year of construction: 1987, condition: ready for operation (used), Center width: 400-800mm, rotational speed: 1000-2700/min, workpiece diameter: 10-300mm, grinding wheel diameter: 40-300mm, swivel angle: -45 to 45°, length: 3000mm, width: 2500mm, height: 2275mm, with oil mist separation system Hoffmann (new filter inserts), filter system gravity belt filter Faudi, hydraulic unit, additional grinding head for grinding worm gears, grinding mandrels diameter 50, 40, 27, 22, holder for SK40 and MK5, driver sets for different clamping diameters, operating instructions, circuit diagrams in paper form, an inspection is possible. Dwjdpfx Aergahxsf Ied

Condition: used, Year of construction: 2006, max. wheel diameter 2 - 45 mm gear width 250 mm max. module 1,5 mm min. module 0,5 weight of the machine ca. 2,2 t control Fanuc 18i-MB Dedevq Sfzopfx Af Ijwd max. workpiece length 250 mm weight of the machine ca. 2200 kg Milling cycles: - straight, helical, crowned gearing - radial, radial-axial, climb and conventional milling, roughing, finishing - worm wheels, straight-toothed bevel wheels, face gearing (option: only in partial process) Technical Details: - maximum workpiece length 250 mm - maximum toothing length 150 mm - maximum module in steel 1 mm (gear hobbing) - maximum module in steel 1.5 mm (worm milling) - maximum module in steel 0.5 mm (bevel gear hobbing) - milling cutter diameter 16-32 mm (gear hobbing) - milling cutter diameter 40-63 mm (worm milling) - maximum setting angle of milling head ±45 deg. (Rolling) - maximum setting angle of milling head ±30 deg. (worm milling) - Shift travel 34 mm (CNC axis) - Collet / retraction mandrel W20 - maximum speed of the workpiece spindle 770 rpm. - milling spindle drive 0.55 kW - Maximum speed of the milling spindle 8000 rpm. CNC axis drives: -X-axis = plunge travel 80 mm -Z-axis = longitudinal feed travel 190 mm -C-axis = workpiece axis 360 deg. -Rapid traverse X/Z 6 m/min. -Hydraulic unit 0.37 kW -Dimensions 2100 x 1440 x 1700 (LxWxH) Options: -CNC shift axis 34 mm -Adjustment angle with CNC axis -Deburring device Accessories: - spiral conveyor

Condition: used, Gears, spur gears, bevel gears, worm gears -Manufacturer: Nord, gearbox type SK 42125AD-100 L/4 Dodpfjh Ig Sysx Af Iswd -Translation: i = 87.30 -Drive shaft: hollow shaft Ø 60 x 235 mm -M2 max: 1892Nm -Dimensions: 380/250/H470 mm -Weight: 101 kg

Year of construction: 2003, condition: ready for operation (used), There are 3 retrofit Feintool fineblanking presses with controls from Pneutronik available. 1) Feintool GKP-F 160, year of manufacture: 2001, cutting force: 100t, total pressing force: 160t, head pressure: 40t, table pressure: 50t, stroke rate: 70/min, power: 22kW, max. material thickness: 6mm, stroke height: 62mm, machine dimensions X/Y/Z: approx. 1800mm/1800mm/2800mm, weight: approx. 9000kg, control: Pneutronik. 2) Feintool GKP-F 160, year of manufacture: 2003, cutting force: 100t, total pressing force: 160t, head pressure: 40t, table pressure: 50t, stroke rate: 70/min, power: 22kW, material thickness: 6mm, stroke height: 60mm, machine dimensions X/Y/Z: approx. 1800mm/1800mm/2800mm, weight: approx. 9000kg, control: Pneutronik. Presumably there is bearing damage to the flywheel. 3) Feintool GKP-F 250, year of manufacture: 2000, total pressing force: 250t, head pressure: 75t, table pressure: 75t, ejector force: 18t, material thickness: 10mm, lifting height: 61mm, machine dimensions X/Y/Z: approx. 2100mm/3100mm/3200mm, weight: approx. 14500kg, control: Pneutronik. Presumably there is bearing damage to the worm shaft. Documentation available. On-site inspection is possible. Dwjdpfxeu Dalyo Af Isd

Condition: used, module Diameter mm boring diameter mm Dwedpfx Afed Il Iqo Iod Drawer cabinet with 52 Rack Milling Cutter Mod. 0.7-10 single and multi-barreled 124 hobs Mod.0.3-2.5 40 worm wheel cutter Mod. 0.3-2.5

Condition: used, Gears, spur gears, angular gears, worm gears -Manufacturer: Chiaravalli, worm gear type CH-04P NT unused -Translation: i = 10 -Hollow shaft: Ø 14 x 33 mm / 18 x 65 mm -Hole circle: Ø 87 x 9 mm -Dimension: 120/1285/H125 mm -Weight: 2.0 kg Dodop Udidjpfx Af Iowd

Year of construction: 2018, condition: ready for operation (used), A gear flank grinding machine Reishauer, completely overhauled by Burri Werkzeugmaschinen, is available. Grinding spindle speed: 3500rpm, cutting speed: 63m/s, max. gear diameter: 360mm, module range: 0.1-7, number of teeth: 6-600, max. workpiece height: 160mm, max. helix angle: +/-45°, max. workpiece weight: approx. 60kg. Min. wheel root circle diameter: 250mm, grinding wheel dimensions X/Y/Z: 350mm/104mm/160mm, grinding worm diameter range: 270mm-350mm, max. grinding width: 175mm, max. workpiece speed: 800rpm. Includes profiling devices, balancing device, structure-borne noise contact control, compact filter system, cooling unit, cooling water recooler, robot automation, and transport trolleys. Documentation available. An on-site inspection is possible. Dedpow Rqwaefx Af Iewd

Condition: used, Gearbox, bevel gear, worm gear Dwodpfx Afst Snwxo Ied -Gearbox: Ratio: i = 1:30 -Shafts: Ø 19 x 50 mm / Ø 28 x 60 mm -Dimensions: 150/145/H175 mm -Weight: 5.1 kg