Used Wire Winder for sale (3,140)

Year of construction: 1998, condition: ready for operation (used), X-axis: 500mm, y-axis: 350mm, z-axis: 256mm, taper cutting device: U=70mm, V=70mm, connected load: 9kVA, rated current: 13.1A, weight: 4.4t, equipment: automatic wire threading, lowering water tank, universal clamping frame, hand-held control unit, AgieSetup 3D automatic workpiece position compensation, flushing gun, paper cartridge filter and Lei/Wirecut programming software with dongle. An on-site inspection is possible. Njdpfx Acozadkxjmolc

Condition: good (used), Introma ZD-2D Wire Stitcher Machine in very good condition, recently serviced. Technical specifications: Nledpfjzdavrex Acmoc Capacity: 180/min Maximum stitching thickness: 25mm Wire diameter: max. 1mm Power supply: 380V Weight: 230kg The machine features an adjustable table for block and booklet stitching. Front margin. Instructions included.

Condition: good (used), Year of construction: 2004, functionality: fully functional, The used FANUC ALFA 1-iC wire EDM is a medium-sized, 5-axis CNC-controlled electrical discharge machine with submerged machining; X/Y/Z travel: 550/370/410 mm; year of manufacture: 2004, CE-compliant, complete with automatic wire threading, chiller, and openable roof. Technical specifications of the FANUC ROBOCUT ALPHA 1iC wire EDM: - Maximum workpiece dimensions (L x W x H): 820 x 730 x 300 mm Nledpfx Ajxd R Hmscmec - Maximum workpiece weight: 1000 kg - CNC control: Fanuc Series 180is-WB - 5 axes (X, Y, Z, U, V) - Stroke on axes X/Y/Z/U/V: 550/370/410/120/120 mm - Rapid traverse on X, Y, Z axes: 900 mm/min - Rapid traverse on U, V axes: 450 mm/min - Worktable size (L x W): 780 x 600 mm - Maximum cutting angle: 30 degrees - Automatic wire threading - Wire diameter: 0.1–0.3 mm - Electrical supply: 400 V; 50/60 Hz - Total power requirement: 13 kW - Total machine weight: 3100 kg

Condition: reconditioned (used), Year of construction: 2013, Equipment: fridge, AGIECHARMILLES CUT400 wire EDM machine, manufactured in 2013. Travel: X 800, Y 550, Z 510, U 800, V 550 mm. Maximum taper: 30°/510 mm. Maximum workpiece dimensions: 1,300 x 1,000 x 510 mm. Nedezbimhspfx Acmslc Maximum workpiece weight: 3,000 kg. Threading height up to 510 mm. Available wire diameters: 0.10 - 0.33 mm. Best surface finish: 0.20 Ra. Wire spools up to 25 kg. CHILLER UNIT. Dielectric volume: 1,700 liters. INCLUDED SOFTWARE: TAPER-EXPERT, CT-EXPERT, PROFIL EXPERT, POWER EXPERT, SURFACE EXPERT. Wide selection of technologies for the most common workpiece/wire materials.

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,425 h, functionality: fully functional, workpiece weight (max.): 750 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, total height: 201 mm, total length: 220 mm, total width: 202 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 220 mm, workpiece width (max.): 550 mm, workpiece length (max.): 1,000 mm, type of input current: three-phase, table width: 450 mm, table length: 680 mm, empty load weight: 2,450 kg, Machine completely cleaned and overhauled. Nledpfx Acoy Tvtmemoc 0.1 mm option available. Available for viewing at our facilities in Semsales, Switzerland.

Condition: good (used), Winch rope, crane rope, lifting rope, wire rope, clothesline, PVC wire rope -Wire rope: PVC-coated steel cable -Type: 6x7 FC PVC transparent -Rope nominal diameter 4.0 / 5.0 mm -Length: 102 m -Quantity: 1 piece available -Price: per piece -Weight: 6.6 kg/pc. Nledpfx Aspy Ryqecmsc

Condition: good (used), Year of construction: 2000, For wire diameters from 1 to 5.5 mm Drawing drum diameter: 400 mm Drawing speed max. 25 m/min For screw manufacturing/cold forming Nedpfey N Df Njx Acmelc

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, Wire diameter range: 2,0 - 10,0 mm Nlodpfx Acoy Ehrfomoc Wire feeding length: unlimited No. of CNC-axes: 5 Bend-back clearance: max. 600 mm Weight: 2.400 Kg. *with chamfering unit* complete with an motorized wire decoiler table diamtere: 1.500 mm loading capacity: 1.500 Kg.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Wire diameter range: 2,0 - 6,0 mm Wire feeding length: unlimited complete with an motorized wire decoiler WAFIOS H 3 table diamtere: 1.600 mm Nodpfx Acoy Ehpwomolc loading capacity: 1.500 Kg.

Condition: excellent (used), Year of construction: 1989, Machinetype: barbed wire machine Make: VITARI Type: MFS Constr. year: 1989 line wire diameter: 1,6-2,8mm point wire diamter: 1,6-2,5 mm output – meter/min: 27-47 distance of barbs: 50-150mm Nledpfow N D Suex Acmsc Excellant condition

Condition: excellent (used), Year of construction: 1994, Nail making machine Make: WAFIOS Type: N90 Constr. year: 1994 Nledpjuhxqmefx Acmjc diameter range: 2,5-3,8 mm nail length: 50-90 mm output – pieces/min: 800 Machine includes Automatic wire paz off and wire cleaner !!

Condition: used, Year of construction: 1989, Model - 600/6 Year - 1989 Dies suitable for drawing low carbon steel wire rod entry diameter 5.5/6 mm max. They are two mirror dies and one has 5 steps and the other 6 steps. All with 600 mm shooting capstans. They both have a vertical skein for winding yarn onto loops. DC electrical equipment included. The dies will be sold in their "used, working, seen and liked" condition. Nledpeyubh Rjfx Acmsc

Condition: good (used), Year of construction: 1980, Technical Details ; Wire Diameter - 1.2- 4,5 mm Nails lenght - 10- 150 mm Capacity - 800 kg/h List of equipment : 1x Wafios S150 2X Wafios S120 Nljdpfx Acovfc A Tsmjc 1x Kovopol THA 60 1X Kovopol THA 100 1X Moroni SPND 80 2x Nails polishing machine Wire Drawing Line SKET 5 Blocks Wire input - max. 6,0 mm Complete nail making plant in good working condition !! wire output - min. 2,5 mm

Condition: excellent (used), Year of construction: 1995, Combination Unit: Manufacturer: GSG Feeder: Type: 840.02-027 Crusher Descaler: Type: 663.02-017 Wire Range: Ø5.5-16mm For wire rod with approx. 40-60 daN/mm² strength Crushing and Bending Rollers: Carbide Inserts Adjustment with 0.37 kW - 1.15 A gear motor Brush Drive with 0.25 kW gear motor, n=293 rpm Connection Voltage: 380-420 V 50 Hz Dry Coating Unit: Type: BSG/T Filling: Calcium Stearate (e.g., Traxit Type: D S 51 E) Stearate Consumption: approx. 350 g per t of wire Drawing Speed: max. 15 m/s Electrical Power: 2x 0.55 kW gear motors Cassette: 2 slots (supplied with 1x roller block + 1x cassette) Type: PKG/T (TS) Cleaned rolled wire Wire strength approx. 40–60 daN/mm² Wire range max. inlet diameter 9.5mm, finished diameter 3.5–8.5mm Roll dimensions min. Ø115mm, max. Ø125mm, Bore diameter Ø82mm, width 15–25mm Cooling pin diameter 25mm Cooling water consumption approx. 600 l/h Drawing machine: Manufacturer: Koch Type: KHZ 5000 Year of manufacture: 1993 Serial number: 13.821 Number of draws: 1 draw per block Drawing drum: Ø700mm Tensile force: mechanical 5000 N Wire material: mild steel wires Run-in strength: approx. 40 – 45 daN/mm² Nedpfxsr Nfvmj Acmslc Maximum drawing range: Inlet diameter 5.0 – 8.5mm Cross-section reduction: 20 x 25% (mechanical gradation) Drawing speed: up to max. 7.0 m/s Brake: Twiflex, type: MRB Drive: AC motor/frequency converter, Siemens PN=110 kW, n=1485 rpm Spooler: Manufacturer: Koch Type: KHS 1250 Year of manufacture: 1993 Factory No.: 13741 Wire diameter: 5 – 8.5 mm Strength: approx. 55 – 70 daN/mm² Winding speed: V=7 m/s, adapted to the drawing machine Filling weight: approx. 3000 kg Spool drive motor: Three-phase motor with external fan Type: 1 PQ 6253 – 6 AA 70- Z A 15 + K 20 + C 14 + H 46 P=37 kW, n=1000-2000 rpm, IP54, design B3 Laying drive motor: 66-671U, 1.5 kW, 170 V, 9.8 A, 1680 rpm, IP 44, B5-200 With Attached tachometer generator TG 20, 20 V / 1000 rpm With attached spur gear SK 32, i=57.53, design B6 Hydraulics: Hydraulic excavator type: H13 AK Pneumatics: Twiflex disc brake type: MRB Pneumatic cylinder type: SPWG 28032-25mm stroke Dimensions: 3100 x 3000 x 1700 mm (L x W x H) without counterweight

Year of construction: 1997, condition: good (used), Machine info: EVG Polybend stirrup machine PBE 2-16 come with 2 Pay offs - build in 1997 comes with a complete new control unit - original EVG Single wire: 6 –16 mm Twin strand: 6 –12 mm Voltage 400 Volt Nledpfx Aon Ut A Socmsc 50 Hz 30 Kw Production year: 1997

Year of construction: 2017, condition: like new (used), 2D Wire Bending Machime Year - 2017 Manufacturer - VIBRA Njdpomqk Tpjfx Acmjlc Wire diameter - 1-4 mm Capacity - 30pieces/ min Power - 3,5 kw

Condition: used, functionality: fully functional, machine/vehicle number: D12L/8458, Offer Number: D12L/8458 Machinetype: wire nail press Make: WAFIOS Nodpfx Asy Rz Ttscmolc Type: S75 Constr. year: wire diameter: 1,8-3,1 mm nail length: 10-75 mm output - pieces/min: 420 Location: In our warehouse

Year of construction: 2003, condition: good (used), functionality: fully functional, machine/vehicle number: 03234, 6 Brush ( 3 pairs) descaling machine for steel wire size 5.5mm - 16.0 mm max (low carbon) Brush pairs arranged in a 60 degree offset for maximum effect. A very clean looking machine. Njdox R Uzdopfx Acmelc On site viewing and inspection recommended

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 8,400 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, overall weight: 3,700 kg, A demonstration machine is for sale. Travel range: X-axis: 600 mm Y-axis: 400 mm Z-axis: 300 mm U-axis: ±50 mm V-axis: ±50 mm Max. workpiece dimensions: 990 x 620 x 295 mm Max. table load: 550 kg Max. taper: ±21º / 100 mm Machine weight: 3700 kg Machine height: 2210 mm Machine dimensions: 2480 x 2980 mm Nodpfjza Eppox Acmslc Standard wire diameter: 0.15 to 0.3 mm Max. weight of wire spool (kg): 10 kg (P10) Surface quality: Ra 0.35 Capacity of the water system (l): 1000 Machine equipment: Transformer Windows CE touch screen controller Automatic wire threading (AWT) SD Master Tubular linear drive Collision protection X/Y/Z/U/V axes 0.1-μm resolution in the linear scale PC acrylic filter tank cover Standard remote box Water chiller Flush gun Protective door lock 3-filter water tank design CE conformity configuration Demineralized water tank

Condition: used, Year of construction: 2004, overall weight: 2,580 kg, total length: 2,200 mm, total width: 1,650 mm, total height: 2,250 mm, AGIE AGIECUT PROGRESS 2Wire EDM machineWorkpiece height: approx. 250 mmWorkpiece weight: approx. 400–500 kgTable size: approx. 600 x 400 mmSupply voltage 3 × 400 V, frequency 50 Hz, power 12.1 kVA, rated current 17.5 A, short-circuit current 10 kA.Wire EDM technology, automatic wire feed, hydraulic systems, robust construction.Control panel, emergency stop, sensor monitoring. Nlodpfx Asy S Ni Ejcmjc Travel Z-axis: 256 - mm Travel X-axis: 350 - mm Weight approx.: 2,580 kg Control: CNC/SPS Dimensions (LxWxH) approx.: 2200 x 1650 x 2250 mm Travel Y-axis: 250 - mm Year of construction: 2,004 Condition: in working order Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: Yes

Condition: used, Year of construction: 2001, overall weight: 3,350 kg, total length: 2,100 mm, total width: 2,000 mm, total height: 2,300 mm, CHARMILLES TECHNOLOGIES ROBOFIL 510with Charmilles control system. Travel paths X/Y/Z: 500 x 350 x 400 mm. Equipped with Erowa chuck, Erowa ITS rotary changer (24-fold), ManoSet XL, and a comprehensive clamping package. Includes additional flushing, water/water heat exchanger, and water cooling unit. Documentation available. Used, functional.Connection 3~ / 400 V / 50 Hz, power 10 kVA, current 15 A.Automatic wire tensioning, precise wire guidance, stable construction.Control console (Siemens), protective devices, emergency stop. Njdpsy S Axtsfx Acmelc Weight approx.: 3,350 kg Control: CNC-Steuerung Travel X-axis: 500 - mm Travel Y-axis: 350 - mm Travel Z-axis: 400 - mm Dimensions (LxWxH) approx.: 2100 x 2000 x 2300 mm Year of construction: 2,001 Condition: in working order Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: Yes

Condition: good (used), Year of construction: 2001, Travel ranges X / Y / Z: 220 x 150 x 150 mm Z-axis unit: Standard equipment (= 5th axis) Max. taper angle: 15° (for a workpiece 100 mm thick) Taper machining unit: Standard equipment (= 3rd and 4th axis) Wire diameter: 0.03 – 0.25 mm Dimensions L x W x H: 1900 x 2345 x 2060 mm Weight: 3500 kg Nledpfx Asg Icdyecmjc Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 44143 Dortmund - Wambel

Condition: used, functionality: fully functional, High-precision industrial multi-wire cutting machine designed for cutting hard and brittle materials. Nsdpfxsy Ey I Sj Acmjlc

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: 100153, overall weight: 12,000 kg, total height: 3,009 mm, total width: 1,780 mm, total length: 4,487 mm, With the DW288, the high speed and precision provided by diamond wire technology are a given. The award-winning DW288 is specifically designed for the production of mono- and multicrystalline wafers, and can operate with either diamond wire technology or slurry. It is also engineered for high throughput with extremely thin diamond wires and operates at the highest speeds. Nsdpfxsw Nhnas Acmolc

Year of construction: 2003, condition: ready for operation (used), A CNC wire EDM machine Charmilles is available. Travel X/Y/Z: 340mm/220mm/220mm, travel U/V: 350mm/220mm, max. taper angle: +/-30°, max. taper height: 220mm, max. workpiece dimensions X/Y/Z: 1100mm/550mm/220mm, max. workpiece weight: 750kg, table dimensions X/Y: 680mm/450mm. Machine dimensions X/Y/Z: 2050mm/2050mm/2000mm, weight: approx. 3250kg, working hours: 97916h. Documentation available. An on-site inspection is possible. Nlsdoy R Dtcopfx Acmsc