Used Wire Winder for sale (3,298)

Condition: like new (used), Year of construction: 2015, load capacity: 1,200 kg, lifting height: 9,450 mm, construction height: 3,900 mm, operating hours: 3,483 h, fuel type: electric, mast type: triplex, Manufacturer + model: LINDE V (5213) Mast: 3F9450 ID: 23106.016 Category: Used Mast: 3F Lowered height: 3900 mm Lifting height: 9450 mm Capacity: 1200 kg Fgodpfjzv H Nzex Ac Uog Picking height: 10500 mm Initial inspection: Yes Cabin width: 1200 mm Year: 2015 Hours: 3483 hours Capacity: 48 V / 620 Ah - Year of manufacture 2021 Options: FULL options!! - Triplex mast - FFL - SAFETY doors with TILTING function!! - Adjustable forks! - PSA (Sick) - Induction / Wire Guidance - End-of-travel sensors on the mast

Condition: like new (used), Year of construction: 2015, load capacity: 1,200 kg, lifting height: 9,450 mm, construction height: 3,900 mm, operating hours: 5,075 h, fuel type: electric, mast type: triplex, Manufacturer + model: LINDE V (5213) Mast: 3F9450 ID: 23106.0175 Condition: Used Mast: 3F Lowered height: 3900 mm Lifting height: 9450 mm Capacity: 1200 kg Platform height: 8900 mm Picking height: 10500 mm Initial inspection: Yes Cabin width: 1200 mm Year: 2015 Hours: 5075 hours Capacity: 48 V / 620 Ah Options: FULL options!! - Triplex mast - FFL - SAFETY doors with TILTING FUNCTION!! - Adjustable forks! - PSA (Sick) - Induction / Wire Guidance Fsdszv H N Uepfx Ac Uogg - End-of-travel sensors on the mast

Year of construction: 1986, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 530, Industrial Double-Drum Winder W04 – Winding Machine Fgedpfxozu Nf Ao Ac Usg For sale: industrial W04 winding machine designed for winding flexible plastic products, profiles, tubes, cords, strips, or similar continuously extruded materials. The machine was previously used in production as part of an extrusion line. Basic information: Machine type: industrial winding machine Designation: W04 Year of manufacture: 1986 Double-drum design Drum 1 / Stop / Drum 2 / Reset controls Emergency stop button Traverse mechanism for even material distribution Adjustable operation Electrical control cabinet IMO iSmart controller Lenze frequency inverter 24 V power supply Mounted on a mobile steel frame This is an older, robust industrial machine. The electrical system has been upgraded during its service life. Condition and equipment are shown in the photos. Suitable for further use in production, refurbishment, or as a base for a custom winding application. Location: Ivanka pri Nitre, Slovakia Price: €3,000 For further information or additional photos, please contact me via message.

Condition: excellent (used), Year of construction: 2026, Wire reel, pasture wire reel, barbed wire winder, wire winder, wire winding machine, pasture fence winder, winding device Fgodpfxsxvh Huj Ac Ujg -Drum diameter: 800 mm -Drum width: 990 mm -Drive: hydraulic -The device could be used with a corresponding front loader or three-point hitch -without front loader mount and hydraulic connections -Dimensions: 1020/1450/H830 mm -Weight: 318 kg

Condition: good (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 101D1902, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, workpiece height (max.): 300 mm, workpiece width (max.): 1,050 mm, workpiece length (max.): 775 mm, Equipment: documentation/manual, We are selling a wire erosion machine. Condition: used, fully functional Technical specifications: Manufacturer: FANUC Model: Alpha 1iD CNC control: FANUC 310i-WA Operation: Touchscreen; Editor Manual control panel: yes Travel ranges: X 600 mm × Y 400 mm × Z 310 mm U/V axes: ±100 mm (total travel of 200 mm) Wire diameter: 0.10–0.30 mm Max. workpiece size: approx. 1,050 × 775 × 300 mm Automatic wire threading (AWT) Machining under water; full immersion machine Ethernet and USB connection Fjdozlg Agspfx Ac Ujgg The FANUC Alpha 1iD offers reliability, very good cutting quality, and low maintenance requirements. High-quality clamping devices, Hirschmann System 4000, can also be included. The machine can be inspected and tested by appointment. If you have any questions or are interested, please do not hesitate to contact us.

Condition: used, Year of construction: 1998, Control FANUC Series 16-W x-axis 320 mm y-axis 220 mm z-axis 180 mm u-axis 120 mm Fodszrh N Ujpfx Ac Usgg v-axis 120 mm rapid traverse (x) 900 mm/min rapid traverse (y) 900 mm/min rapid traverse (z) 450 mm/min rapid traverse (u) 450 mm/min rapid traverse (v) 450 mm/min max. workpiece weight 250 kg weight of the machine ca. 1,5 t connected load 11 kVA In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Condition: good (used), Year of construction: 2016, load capacity: 1,200 kg, lifting height: 7,150 mm, construction height: 2,900 mm, operating hours: 3,475 h, fuel type: electric, mast type: triplex, Manufacturer & model: STILL EK-X 48 Mast: 3F7150 ID: 26041.5289 Fsdpfx Acjzv Rz Ij Usgg Category: Used Mast: 3F Lowered height: 2,900 mm Lifting height: 7,150 mm Capacity: 1,200 kg Platform height: 6,600 mm Picking height: 8,200 mm Cabin width: 1,200 mm Year: 2016 Operating hours: 3,475 h Battery: 48V / 620Ah Options: FULL options!! - Triplex mast - FFL - DOUBLE steering!!!! - Adjustable forks! - Induction / wire guidance

Year of construction: 2020, condition: like new (used), functionality: fully functional, For sale: A.Celli Nonwovens Stream In Line, manufactured in 2020 Industrial in-line winding and slitting system designed for the processing of nonwoven materials. Fgsdpezudfdofx Ac Uog Machine details: Manufacturer: A.Celli Nonwovens S.p.A. Machine type: Stream In Line Machine version: 668 Serial number: 2020026 Year of manufacture: 2020 CE marked Country of manufacture: Italy The machine comes from an industrial nonwoven production facility and is offered as shown in the photos. The system includes the main machine structure, winding and roller assemblies, drives and associated machine components. A detailed PDF with the complete technical specification of the machine is available upon request. We will be happy to provide it to seriously interested customers. Additional photos and further information are also available upon request. Price: on request / negotiable. Please contact us for further information.

Condition: like new (used), Year of construction: 2018, load capacity: 1,000 kg, lifting height: 5,550 mm, construction height: 2,360 mm, operating hours: 2,442 h, fuel type: electric, mast type: triplex, Manufacturer + model: JUNGHEINRICH EKS 210 Mast: Z + i - 3F5550 ID: 25064.5758 Cat.: Used Mast: 3F Lowered height: 2360 mm Lifting height: 5550 mm Capacity: 1000 kg Platform height: 4750 mm Picking height: 6350 mm Fedpszv Ru Ujfx Ac Uogg Initial inspection: Yes Cabin width: 1500 mm Year: 2018 Hours: 2441 hours Capacity: 48 V / 465 Ah Options: FULL options!! - Triplex mast - FFL - DOUBLE steering!!!! - Adjustable forks! - 2 x Blue spot - PSA - Floodlights - Induction / Wire guidance

Condition: ready for operation (used), Used and fully functional RMG 89 wire drawing machine: Max. diameter: 14 mm. Capstan diameter: 900 mm. Drawing force: 3,850 kg. Fgodpfxozx Riks Ac Ujg Motor: 18.75 kW Speed: 21.25 m/min. Weight: 2,000 kg.

Year of construction: 2003, condition: good (used), functionality: fully functional, machine/vehicle number: 03234, 6 Brush ( 3 pairs) descaling machine for steel wire size 5.5mm - 16.0 mm max (low carbon) Brush pairs arranged in a 60 degree offset for maximum effect. Fedpfjx R Uzdjx Ac Uogg A very clean looking machine. On site viewing and inspection recommended

Condition: like new (used), Year of construction: 2018, load capacity: 1,000 kg, lifting height: 10,500 mm, construction height: 4,730 mm, operating hours: 1,629 h, fuel type: electric, mast type: triplex, Manufacturer + model: JUNGHEINRICH EKS 308 Mast: L + i - 3F10500 ID: 23123.5000 Category: Used Mast: 3F Lowered height: 4730 mm Fgjdpfszut Uhox Ac Ueg Lifting height: 10500 mm Capacity: 1000 kg Platform height: 10500 mm Picking height: 12100 mm Cabin width: 1500 mm Year: 2018 Hours: 1629 hours Capacity: Complete NEW 48 V / 620 Ah - Year of manufacture: 2026 Options: - Mast Triplex - FFL - PSA (Sick) - Induction / Wire Guidance – complete, LIKE NEW!!

Condition: like new (used), Year of construction: 2018, load capacity: 1,000 kg, lifting height: 5,550 mm, construction height: 2,360 mm, operating hours: 2,482 h, fuel type: electric, mast type: triplex, Manufacturer + model: JUNGHEINRICH EKS 210 Mast: Z + i - 3F5550 ID: 25064.5759 Category: Used Mast: 3F Lowered height: 2360 mm Lifting height: 5550 mm Capacity: 1000 kg Platform height: 4750 mm Picking height: 6350 mm Initial inspection: Yes Cabin width: 1500 mm Year: 2018 Hours: 2482 hours Capacity: 48 V / 465 Ah Options: FULL options!! - Triplex mast - FFL - DUAL steering!!!! - Adjustable forks! - 2 x Blue spot lights - PSA (Pedestrian Sensing Alarm) - Floodlights - Induction / Wire Guidance Fgedpfozv H Tyox Ac Usg

Year of construction: 2018, condition: ready for operation (used), An automatic slitter-rewinder Jurmet is available. Total operating distance: approx. 8900km, max. working width: 1600mm, min. parent roll width: 300mm, max. parent roll diameter: 1000mm, parent roll core inside diameter: 76mm/152mm, finished roll core inside diameter: 25.4mm/76mm, max. mechanical speed: 500m/min, max. web tension: 153N, knife positioning accuracy: +/-0.3mm, pressure roller width: 1600mm, max. product weight: 150g/m², max. product thickness: 220µm, operating hours: approx. 9850h. Documentation available. An on-site inspection is possible. Fgsdpfxszhnupe Ac Ujg

Condition: refurbished (used), Year of construction: 2019, functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, total height: 2,320 mm, total length: 2,790 mm, total width: 2,020 mm, workpiece height (max.): 350 mm, workpiece width (max.): 800 mm, workpiece length (max.): 1,030 mm, overall weight: 4,440 kg, warranty duration: 6 months, tank capacity: 1,000 l, Equipment: cooling unit, GF AgieCharmilles CUT E600 Year of manufacture: 2019 Wire erosion machine with automatic wire threading Travel ranges (X/Y/Z): 600 x 400 x 350 mm Travel ranges (U/V): +/- 50 mm Taper / height: 30° at a height of 77 mm Max. workpiece dimensions: 1030 x 800 x 350 mm Max. workpiece weight: 1000 kg Excellent surface quality for hard metal/steel: 0.12/0.18 µm (Ra) Standard wire guides: 0.20 and 0.25 mm User-friendly AC CUT HMI 2 control interface Operation via 19" TFT touchscreen Machine dimensions: 2020 x 2790 x 2320 mm Total weight without dielectric fluid: 4440 kg Fjdpozvf Ddefx Ac Uogg The wire erosion machine will be cleaned, serviced, and thoroughly tested by us after the order is received. We can also perform a test cut or a live demonstration beforehand. Commissioning and training can also be carried out by us. Optionally, we offer the following: - Transport and installation - Cooling unit - Clamping devices - Wire / filters / resin

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: MIKA Seilzüge, 1x Demag DR wire rope hoist crane Due to numerous inquiries - Price is per unit! 5 units available, see listing below: 1x Demag wire rope hoist EKDR-Pro3 NL1600Kg/1.6t, serial number 96656002, 4M, hook path/lift 12m! – double reeved, year 2015 1x Demag wire rope hoist EKDR-3 NL1600Kg/1.6t, serial number 96656701, 2M, hook path/lift 12m! – double reeved, year 2015 1x Demag wire rope hoist EKDR-3 NL1000Kg/1.0t, serial number 96305549, 4M, hook path/lift 12m! – double reeved, year 2012 1x Demag wire rope hoist EKDR-3 NL1000Kg/1.0t, serial number 96305548, 4M, hook path/lift 12m! – double reeved, year 2012 1x Demag wire rope hoist EKDR-3 NL1600Kg/1.6t, serial number 96305550, 4M, hook path/lift 12m! – double reeved, year 2012 Each with 2 lifting speeds, lifting height 12m, trolley gauge adjustable Each hoist supplied with pendant control and power supply plug Total weight approx. 300 kg, connection to 400V 50Hz Fjdpfoy D D S Sex Ac Usgg Very good condition, see photos Item location: 75053 Gondelsheim Shipping available, please inquire with your postal code

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Wire EDM machine type Agiecut Classic 2s, year of manufacture 2004, for sale. The machine is in good condition and operates flawlessly. An inspection under power is gladly possible. A video is also available upon request. Technical machine data: Agiecut Classic 2S • Manufacturer: AGIE SA, CH-6616 Losone (Made in Switzerland) • Model / Type: AGIECUT CLASSIC 2S • Year of manufacture: 2004 (with CE marking) • Serial number (unit): 663 • Equipment list No.: C32.102 • Circuit diagram No.: 629.412 Electrical connection values & performance • Voltage: 3 x 400 V • Frequency: 50 Hz • Power: 9 kVA • Rated current: 14 A Fodpjy Snm Nsfx Ac Uegg • Short-circuit current: 10K Weight & components • Total weight: 2,580 kg • Subcomponents (serial numbers): o MC 2S CLASSIC (unit): Serial 663 / Equipment List 002.354 o DA CLASSIC 2S: Serial 659 / Equipment List 033.804 o CABINET CLASSIC 2S (control cabinet): Serial 665 / Equipment List 028.254 Loading can be arranged by us upon agreement. If you have any questions, please feel free to contact us at any time.

Condition: excellent (used), Year of construction: 2003, Sodick AQ535L wire EDM machine Year: 2007 5-axis Technical details: Fgodpfjzqzznex Ac Uog X-axis travel of 550 mm Y-axis travel of 350 mm Z-axis travel of 300 mm U/V axis: 80/80 mm Work table size is 790 x 500 mm, Maximum workpiece weight capacity of 800 kg Work tank dimensions (W x D): 1100 x 720 mm Distance from floor to table top: 1005 mm Workpiece capacity: Maximum workpiece height: 290 mm Wire system: • Taper angle: 20° / 80 mm • Wire tension: 300 g to 2300 g • Max wire feed speed: 250 mm/sec • Max wire spool weight: 6 kg • Dielectric tank: • External dimensions (W x D x H): 640 x 2400 x 1843 mm • Empty weight: 350 kg • Capacity: 730 L

Condition: like new (used), Year of construction: 2017, operating hours: 4,764 h, load capacity: 1,250 kg, lifting height: 6,000 mm, fuel type: electric, mast type: triplex, construction height: 2,830 mm, Manufacturer + model:JUNGHEINRICH EFX 413X + i - 100 - 3F6000 ( = 600 DZ ) Fjdpfjzv H Spex Ac Uogg ID:24096.5461 Cat.:Used Mast:3F6000 Forks:1000 mm Lowered height:2830 mm Lifting height:6000 mm Capacity:1250 kg Year:2017 Hours:4764 hours Capacity:48 v / 750 ah Options:TYPE ; EFX 413 X + i 100 - 600 DZ- VNA truck - Wire Guidance

Condition: like new (used), Year of construction: 2018, load capacity: 1,000 kg, lifting height: 10,500 mm, construction height: 4,730 mm, operating hours: 1,201 h, fuel type: electric, mast type: triplex, Manufacturer + model: JUNGHEINRICH EKS 308 Mast: L + i - 3F10500 ID: 24033.5993 Category: Demo Mast: 3F Lowered height: 4730 mm Lifting height: 10500 mm Capacity: 1000 kg Platform height: 10500 mm Picking height: 12100 mm Cabin width: 1500 mm Year: 2018 Fsdpfezut Uzjx Ac Usgg Hours: 1201 hours Capacity: Complete NEW 48 V / 620 Ah - Year of manufacture 2026 Options: - Mast Triplex - FFL - PSA (Sick) - Induction / Wire Guidance In complete LIKE NEW condition

Condition: used, Year of construction: 2011, Wire erosion / EDM Travel distance X: 400 mm Travel distance Y :300 mm Travel distance Z: 250 mm max. workpiece size X: 590 mm max. workpiece size Y: 450 mm max. workpiece size Z: 250 mm max. workpiece weight: 550 kg table size X: 935 mm table size Y: 770 mm U / V axis: 80 CNC wire EDM machine X/Y travel: 400 × 300 mm Z-axis travel: 250–350 mm U/V axes: 80 × 80 mm Taper cutting: up to ±20° at 80 mm workpiece height Max. workpiece dimensions: 590 × 450 × 250 mm Max. workpiece weight: 550 kg Large worktable: 935 × 770 mm Fsdpfxezu Ruro Ac Uegg Wire diameter: 0.1–0.3 mm Max. wire speed: 420 mm/s Linear motor technology on X and Y axes Suitable for high-precision contours and complex workpiece geometries U/V axes also enable angled and taper cutting

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, workpiece weight (max.): 400 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, workpiece height (max.): 250 mm, workpiece width (max.): 680 mm, workpiece length (max.): 820 mm, warranty duration: 6 months, Equipment: documentation/manual, GF AgieCharmilles CUT E350 Year of manufacture: 2015 Wire EDM machine with automatic wire threading Travel ranges (X/Y/Z): 350 x 250 x 250 mm Travel ranges (U/V): +/- 45 mm Taper / height: 30° at a height of 77 mm Max. workpiece dimensions: 820 x 680 x 250 mm Max. workpiece weight: 400 kg Excellent surface finish for carbide/steel: 0.12/0.18 µm (Ra) Standard wire guides: 0.20 or 0.25 mm User-friendly AC CUT HMI 2 control interface Operation via 19" TFT touchscreen Machine dimensions: 1750 x 2470 x 2200 mm Total weight without dielectric fluid: 2525 kg After receiving the order, we will clean, service, and thoroughly test the wire EDM machine. We can also perform a test cut or an on-site inspection under power beforehand. Fgjdpfjzucliox Ac Ueg We can also handle commissioning and training. We offer the following options: - Transport and installation - Cooling unit - Clamping devices - Wire / filters / resin

Condition: used, Year of construction: 2014, Mitsubishi MV 2400 S wire EDM machine Fodpfx Aozuvyaoc Usgg Year of manufacture: 2014, available from the end of August.

Condition: good (used), Year of construction: 2010, For sale CNC 5-Axis Drilling / Sinker EDM Machine – OCEAN Technologies OCT-90120CA (2010) 📝 DESCRIPTION For sale: High-precision 5-axis CNC drilling / sinker EDM machine from OCEAN Technologies Co., Ltd., model OCT-90120CA. This is a very large-capacity industrial machine, ideal for quickly drilling deep holes and machining complex cavities in the mold making, aerospace, and precision engineering industries. ⚙️ FEATURES AND TECHNICAL CAPABILITIES 📐 Travels and Machining Capabilities (5 Axes) X-axis travel: 900 mm Y-axis travel: 1,200 mm Z-axis travel (Vertical axis): 1,000 mm W-axis travel (Head guide): 350 mm Fgsdpfx Aszrfpxec Ujg Rotary axis / Dividing head (C-axis): Integrated rotary table for multi-angle positioning and machining without re-fixturing the workpiece. 🖥️ Numerical Control & System Operating system: Dedicated Windows XP Embedded. Interface: Ergonomic control panel with color screen, full industrial keyboard, speed potentiometers, and manual axis control buttons. ⚡ Electrical Specifications (Nameplate) Voltage: 400 V AC / 3 Phases / 50-60 Hz Capacity / Power: 35 KVA Overload current: 86 A Compliance: CE marking 🛠️ EQUIPMENT & INCLUDED ACCESSORIES Precision rotary table / chuck with grooves and fixing flanges. Complete filtration system and auxiliary chiller unit for dielectric fluid (RBSystem / Spracflo). Enclosed booth and protective housing with sliding doors. Adjustable control station and manual remote control. 📊 CONDITION & HISTORY Year of manufacture: March 2010 Serial number: DR06461209 Overall condition: Good working condition, machine is clean and maintained in a controlled industrial environment. Maintenance: Regular maintenance performed.

Condition: excellent (used), Year of construction: 1998, Ref:11126 . 1998 Rilecart B-599 Automatic Wire Binding Machine A productive ‘Wire-O’ binding machine with speeds up to 4000 bindings per hour, able to bind a wide variety of book thicknesses using diameters from 5/16” up to 1 inch for a maximum binding thickness of 23 mm. Comprising; Hand feed position for the feeding of pre punched book blocks B599 Automatic closing unit with; Twin Spool wire unwinds system, with paper waste extraction, with automatic change over when spool is low / empty, which ensures consistently high production. Computer controlled programming of binding, from one length, skip feed, up to five lengths in one pass. Automatic wire cutter, toothed belts for different pitch, 3:1 and 2:1. Sprockets for 2:1 and 3:1 pitch. Capable of processing either round or square punched work. Speed adjustable up to 4000 bindings per hour, depending on format, thickness, operator skill, and the quality of work being bound. Dedicated wire guide, turning, closing tools for each diameter, with fast change over times possible due to easy to install methods for the tooling. Microprocessor controlled quality checking systems to ensure that production runs smoothly, with read out on the computer screen advising the operator and management of faults, and productivity information. Extended shingle belt delivery. A set of tools for all common sizes of wire from 5/16” up to 1”. Specification: B599 – Formats, Max. binding size: 400mm, Max. transport size: 500 mm Fedpfjzmx Udex Ac Uogg Min. binding size: 100mm, Min. transport size: 80 mm Max. bind thickness: 23 mm, Min. 3 mm Max. binding wire diameter: 1”, Min. 5/16” Tooling included; 2:1" pitch - 1/2", 9/16", 5/8", 3/4", 7/8" & 1". Max. working speed: 4,000 books/hour. Electric supply: 3 x 380V. + neutral, 50 Hz. Power req. 8 kW. Compressed air supply (required): 8 Atm,10 mc/hour.