Used Copper Wire Drawing for sale (5,263)

Condition: ready for operation (used), Used and fully functional RMG 89 wire drawing machine: Max. diameter: 14 mm. Bdjdozx Rikspfx Aa Ijh Capstan diameter: 900 mm. Drawing force: 3,850 kg. Motor: 18.75 kW Speed: 21.25 m/min. Weight: 2,000 kg.

Condition: used, functionality: fully functional, machine/vehicle number: D20E/8022, Offer Number: D20E/8022 Machinetype: multiple wire drawing machine - dry Info: straight through Make: VEB Type: 8 Block Bdodpewi Tidsfx Aa Ieh Constr. year: inlet wire diameter: 2,5 mm finished wire diamter: 0,8 mm number of drafts: 8 diameter of capstan: 400 mm speed -meters/sek: 15 m Location: Europe

Condition: good (used), Year of construction: 2000, For wire diameters from 1 to 5.5 mm Drawing drum diameter: 400 mm Drawing speed max. 25 m/min For screw manufacturing/cold forming Bdsdpey N Df Njfx Aa Ijh

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, TEUREMA EHS-110 WIRE DRAWING LINE Year of manufacture: 1999 Maximum speed: 10 m/s Total installed power: 230 kW TEUREMA EHS-110 wire drawing line with robust construction, equipped with a Tecno Impianti drawing bench and prepared for industrial use. The machine has undergone a complete electrical modernization, including a new main electrical panel, Siemens S7-1500 PLC, Siemens 1200 HMI screen, 100% new wiring, and new push-button stations, which significantly improves the reliability, maintenance, and operability of the unit. LINE COMPOSITION Coil stands - 2 tilting winders - Maximum capacity per winder: 3,000 kg Vertical winding tower - 6-meter tower - Lifting and lowering carriage with a hoist Mechanical decaling unit Soaping unit - Motor: 1.5 kW - Speed: 1,500 rpm TECNO IMPIANTI DRAWING BENCH - Number of steps: 2 - Two-ring coil: - 1st ring: Ø 610 mm - 2nd ring: Ø 760 mm - 3-speed gearbox: - 3.90 m/s - 7.20 m/s - 10.00 m/s - Power: 160 kW - Frequency: 50 Hz Horizontal coiler - Horizontal drive - Maximum coil capacity: 3,000 kg - 2-speed gearbox: - 7.3 m/s - 10.0 m/s - Maximum coil diameter: Ø 1,200 mm - Core diameter: Ø 600 mm - Usable width: 900 mm - Power: 45 kW Bsdpfxszycako Aa Iedh TECHNICAL DATA - Inlet diameter: 5.5 to 14 mm - Outlet diameter: 4 to 12 mm - Number of blocks: 1 vertical - Maximum line speed: 10 m/s - 2 CL30 A 33 Eurolls cassettes - Rollers: Ø 150 x Ø 90 x 15/20 mm - Total machine power: 230 kW - Frequency: 50/60 Hz ELECTRICAL AND AUTOMATION UPGRADE - Completely new main electrical panel - Siemens S7-1500 PLC - Siemens HMI 1200 screen - 100% new wiring - New push-button stations - New programming AVAILABLE SERVICES Possibility of supply with: - installation - assembly - commissioning - technical assistance - adaptation according to customer needs

Condition: refurbished (used), Year of construction: 1999, In Line WIRE DRAWERS RMG 45 Used and revised to new. Operational. Manufacturer: RMG Type: 45 Max. Ø (mm.): 8 Capstan Ø (mm.): 500 Max. Speed (m/min.): 36 Year: 1999 Bjdpeyrdznofx Aa Ijdh Available at H.B.R. srl - Italy Cheaper Price

Condition: good (used), Single Head Capstan Block Wire Drawing Machine Maximum Inlet Wire's Diameter: 30 mm Bdsdpfet Ixkzjx Aa Ish

Condition: excellent (used), Year of construction: 1995, Combination Unit: Manufacturer: GSG Feeder: Type: 840.02-027 Crusher Descaler: Type: 663.02-017 Wire Range: Ø5.5-16mm For wire rod with approx. 40-60 daN/mm² strength Crushing and Bending Rollers: Carbide Inserts Adjustment with 0.37 kW - 1.15 A gear motor Brush Drive with 0.25 kW gear motor, n=293 rpm Connection Voltage: 380-420 V 50 Hz Dry Coating Unit: Type: BSG/T Filling: Calcium Stearate (e.g., Traxit Type: D S 51 E) Stearate Consumption: approx. 350 g per t of wire Drawing Speed: max. 15 m/s Electrical Power: 2x 0.55 kW gear motors Cassette: 2 slots (supplied with 1x roller block + 1x cassette) Type: PKG/T (TS) Cleaned rolled wire Wire strength approx. 40–60 daN/mm² Wire range max. inlet diameter 9.5mm, finished diameter 3.5–8.5mm Roll dimensions min. Ø115mm, max. Ø125mm, Bore diameter Ø82mm, width 15–25mm Cooling pin diameter 25mm Cooling water consumption approx. 600 l/h Drawing machine: Manufacturer: Koch Type: KHZ 5000 Year of manufacture: 1993 Serial number: 13.821 Number of draws: 1 draw per block Drawing drum: Ø700mm Tensile force: mechanical 5000 N Wire material: mild steel wires Run-in strength: approx. 40 – 45 daN/mm² Maximum drawing range: Inlet diameter 5.0 – 8.5mm Cross-section reduction: 20 x 25% (mechanical gradation) Drawing speed: up to max. 7.0 m/s Brake: Twiflex, type: MRB Drive: AC motor/frequency converter, Siemens PN=110 kW, n=1485 rpm Spooler: Manufacturer: Koch Type: KHS 1250 Bdjdpor Nfvmefx Aa Ioh Year of manufacture: 1993 Factory No.: 13741 Wire diameter: 5 – 8.5 mm Strength: approx. 55 – 70 daN/mm² Winding speed: V=7 m/s, adapted to the drawing machine Filling weight: approx. 3000 kg Spool drive motor: Three-phase motor with external fan Type: 1 PQ 6253 – 6 AA 70- Z A 15 + K 20 + C 14 + H 46 P=37 kW, n=1000-2000 rpm, IP54, design B3 Laying drive motor: 66-671U, 1.5 kW, 170 V, 9.8 A, 1680 rpm, IP 44, B5-200 With Attached tachometer generator TG 20, 20 V / 1000 rpm With attached spur gear SK 32, i=57.53, design B6 Hydraulics: Hydraulic excavator type: H13 AK Pneumatics: Twiflex disc brake type: MRB Pneumatic cylinder type: SPWG 28032-25mm stroke Dimensions: 3100 x 3000 x 1700 mm (L x W x H) without counterweight

Condition: used, functionality: fully functional, machine/vehicle number: D20E/7694, Offer Number: D20E/7694 Machinetype: multiple wire drawing machine - dry Make: SKET / MILL Type: 8 BLOCK Bdjdpfx Aaowi S Ixo Ieh Constr. year: inlet wire diameter: 6,5 mm finished wire diamter: 1,6 mm number of drafts: 8 diameter of capstan: 550 mm and 650 mm speed -meters/sek: 8-12 Location: Europe

Condition: ready for operation (used), Wire Electronic DSV 5431-25 / 380 - DSV 5431-25/380, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Bdjdpfx Aasz Adnuj Ieh

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 1154, total height: 2,040 mm, total length: 2,200 mm, total width: 1,770 mm, type of input current: three-phase, table width: 400 mm, overall weight: 3,100 kg, table length: 600 mm, table height: 220 mm, empty load weight: 2,800 kg, table load: 450 kg, input voltage: 380 V, input frequency: 50 Hz, Equipment: documentation/manual, The Sodick AQ325L wire EDM machine was manufactured in 2002 by the Japanese company Sodic Co., Ltd. This is a precision CNC machine designed for cutting various shapes in conductive materials using the EDM (Wire Cut) method. This model combines a compact design with high machining accuracy, making it ideal for both single and serial production, especially for manufacturing parts with complex geometries. The machine offers a working area capable of machining parts with dimensions up to 350 × 250 × 220 mm and a weight of up to 450 kg. The stable construction and precise axis guidance ensure high repeatability and cutting accuracy, even with demanding materials and complex contours. Additional U and V axes allow for tapered cuts up to 20°, which significantly expands the technological capabilities of the machine. The Sodick AQ325L EDM machine operates with wire diameters ranging from 0.15 to 0.30 mm, offering adjustable wire tension over a wide range and a high wire feed rate, resulting in efficient and stable machining. The immersion system enables operation in a dielectric fluid, increasing the surface quality and dimensional accuracy of the machined parts. Bdjdpfjz Az Uvjx Aa Ijh The Sodic AQ 325 L wire EDM machine is equipped with an efficient dielectric system with a capacity of 530 liters, featuring a filtration system based on replaceable paper filters and a deionizer, which guarantees the maintenance of appropriate operating parameters and a long service life for the components. The ergonomic table height and well-thought-out design facilitate operation and the preparation of parts for machining. Thanks to its robust construction, high weight, and proven technology from the manufacturer Sodick, the AQ325L model is a reliable solution for tool shops, production facilities, and companies involved in precision metalworking. Specifications of the Sodic AQ 325L Wire EDM Machine - Table travel (X / Y axis): 350 × 250 mm - Z-axis travel: 220 mm - Auxiliary table travel (U / V axis): 80 × 80 mm - Working table size: 600 × 400 mm - Working tank dimensions: 895 × 650 mm - Maximum workpiece height: 220 mm - Maximum workpiece height during immersion machining: 200 mm - Maximum workpiece weight: 450 kg - Maximum workpiece weight during immersion machining: 300 kg - Distance from the floor to the top surface of the table: 965 mm - Taper / cutting angle: 20° / 80 mm - Wire tension: 300–2300 g - Max. wire feed rate: 250 mm/s - Wire diameter: 0.15–0.30 mm - Max. wire spool weight: 6 kg - Machine dimensions (W × D × H): 1650 × 1900 × 2040 mm - Overall machine dimensions: 2250 × 2200 mm - Machine weight: 2800 kg Dielectric tank - External dimensions (W × D × H): 550 × 2200 × 1770 mm - Weight of empty tank: 230 kg - Capacity: 530 l - Deionizer: 10 l Filtration system: 2 replaceable paper filters - Layout / arrangement as shown in the drawing - Total length of the system: 3000 mm - Total width of the system: 3500 mm - Power supply: 3-phase AC 220V (50/60Hz)

Condition: good (used), Zip Wire closed spiral in spools Bedpfx Aeztn D Uoa Iodh 3 pallets of spirals, 12 whole new spirals + 12 started. In 3:1 and 2:1 spacing. Sold only in whole.

Condition: used, section length (max.): 14,000 mm, wire diameter (max.): 16 mm, Intended use: The system is used for processing rolled wire in a continuous process: straightening, drawing, and rolling. Technical details: Material processed to date: rolled wire Cutting up to a maximum bar length of 14 m Infeed wire diameter max: 16 mm Infeed wire diameter min: 5 mm Number of drawing steps: 2 Drawing die diameter 1: 584 mm Drawing die diameter 2: 755 mm Maximum speed: 120 m/min Total connected power: 190 kW Operating voltage: 400 V Electrical cabinet: available Run-out: available Descaling: available Wire coating: available Bodpfezf D Awex Aa Ijdh Rolling cassette: available Additional data: The entire system is designed for a final diameter range of 4 - 8 mm, based on the installed straightening and cutting machine. Consisting of: Overhead run-out Breaking descaling Coating device Rolling stand PITTINI IMPIANTI drawing block Tension controller EVG DER 8-C straightening and cutting machine EVG electrical cabinet for straightening machine PITTINI IMPIANTI electrical cabinet for drawing block

Condition: used, Year of construction: 2016, functionality: limited functionality, machine/vehicle number: T1406, input voltage: 200 V, 1 Wire EDM machine, manufacturer: Sodick, type: AG600L, serial number: T1406, year of manufacture: 2016, control system, manufacturer: Sodick, type: LN2W, control system defective. Bdedpfx Aaoz E Hpko Ijh

Condition: excellent (used), Year of construction: 2008, operating hours: 32,820 h, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, workpiece height (max.): 400 mm, workpiece width (max.): 700 mm, workpiece length (max.): 1,200 mm, Equipment: cooling unit, Agie Charmilles FI 440 SLP year of manufacture 2008 operating hours 32,820 x, y, z: 550 x 350 x 400 mm u, v: 550 x 350 mm linear glass scales on all axes 0.5 μm max. workpiece dimensions 1200 x 700 x 400 mm max. taper angle 30 degrees chiller option for large wire spool option for wire chopper automatic wire threading/cutting and repair documentation and software machine powered up for inspection Bodpozgu Igjfx Aa Ijdh

Year of construction: 1999, condition: ready for operation (used), machine/vehicle number: 9920268, GEISS DU2000 T7 Vacuum Thermoforming Machine • 1999 • 2000 × 1000 mm • Halogen Heaters • Sinumerik Control Bdjdpfxjx Uz Ncs Aa Ish Industrial vacuum thermoformer with large 2000 × 1000 mm sheet capacity and deep draw capability up to ~650 mm. Equipped with high-speed halogen flash heaters, Sinumerik heater control, three vacuum pumps, plug assist, auto sheet loader, and motorized window plates for rapid tool changes. Excellent for high-volume thermoformed parts production.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Fanuc Series 180iS-WB control system Travel ranges: Bjdpfezvd Sajx Aa Iodh X 320 mm, Y 220 mm, U 120 mm, V 120 mm, Z 180 mm Max. workpiece weight: 500 kg Machine weight: 1,700 kg Power supply: 13 kVA The machine can be inspected while powered on.

Condition: ready for operation (used), Year of construction: 2021, overall weight: 217 kg, load capacity: 6 kg, arm reach: 2,011 mm, number of axes: 6, This 6-axis PANASONIC TAWERS TM-2000WG3 Super Active Wire was manufactured in 2021. It features a maximum reach of 2,011 mm and a payload capacity of 6 kg. The system includes a 350 A welding power source and is equipped with advanced welding processes such as SP-MAG and Pulse MAG. If you are looking to get high-quality welding capabilities, consider the PANASONIC TAWERS TM-2000WG3 Super Active Wire robot arm we have for sale. Contact us for further details. • Welding power source: 350 A • Welding processes: SP-MAG / Pulse MAG (MIG optional; TIG DC optional) • Repeatability: ±0.10 mm or better • Maximum robot rapid movement: up to 180 m/min • Motion ranges: base ±170°; upper arm -90° to +165°; forearm -80° to +210°; wrist rotation ±270° • Maximum axis speeds: base 195°/s; upper arm 197°/s; forearm 205°/s; wrist up to 629°/s • Wire feeding capability: Super Active Wire • Safety system: CE compliant Additional equipment Bjdpjz Dtn Defx Aa Ijdh • Güdel TMF-1 linear track (2,000 mm travel; repeatability ±0.02 mm) with drive, servo control and track structure • 2 × Panasonic servo-controlled rotary positioners + positioner servo control system • 2 × workpiece frames (approx. 3,500 × 1,500 mm) providing 2 welding/loading stations • Super Active Wire welding torch • Wire Booster system • Wire spool stand / wire cassette • Torch cooling unit • Torch cleaning station • Touch Sensor • Arc Sensor • Power transformer • Robot cable package • Robot/positioner support structures • 2 × safety light curtains and complete cell guarding • Control and integration system • Robot controller / control cabinet Main Components Included • Panasonic TM-2000WG3 welding robot • Panasonic 350 A welding power source • Robot controller / control cabinet • Super Active Wire welding torch • Wire Booster system • Wire spool stand / wire cassette • Torch cooling unit • Torch cleaning station • Touch Sensor • Arc Sensor • Power transformer • Robot cable package • 2 × Panasonic rotary positioners • Positioner servo control system • 2 × workpiece frames • Güdel TMF-1 linear track, 2 m • Linear track drive • Linear track servo control • Güdel track structure • 2 × safety light curtains • Robot / positioner support structures • Complete cell guarding • CE safety system • Control and integration system

Condition: used, Year of construction: 2015, Agie Charmilles Cut 300 SP Wire-Cut EDM. Serial No. 591.063.002.0159 (2015). Country of Origin: Switzerland Location: These lots are located in Swindon, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. Bdsdpfx Ajz Ar Agoa Ish Lot 2 of Auction 3505

Condition: used, Year of construction: 2014, operating hours: 21,476 h, functionality: fully functional, travel distance X-axis: 750 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 510 mm, feed length X-axis: 750 mm, feed length Y-axis: 500 mm, feed length Z-axis: 510 mm, We offer this used AGIE Charmilles CUT 400 SP wire erosion machine, manufactured in 2014. Type: CUT 400 SP Serial number: 001.018 Year of manufacture: 2014 Technical data: Travel ranges (X/Y/Z): 750 x 500 x 510 mm High-precision machining with excellent surface quality Automatic wire threading system (AWT) Modern CNC control with intuitive operation Stable machine construction for maximum accuracy Year of manufacture: 2014 Condition & Equipment: Regularly maintained Fully functional and ready for use Bdsdpfoz A R H Ujx Aa Ieh Inspection and test run possible upon agreement Special features: Due to the large travel ranges, the machine is particularly suitable for larger workpieces and versatile applications in single-piece and series production. If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, Year of construction: 1988, functionality: fully functional, workpiece weight (max.): 350 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 270 mm, wire diameter (max.): 0.3 mm, table width: 450 mm, overall weight: 2,300 kg, table length: 600 mm, table height: 300 mm, empty load weight: 2,300 kg, Two machines for the price of one. One machine is fully operational and in good condition for its age, equipped with a collecting system (sliding slats), and the other can be made operational again with minimal effort, but the new owner can also use it for spare parts (all electrical boards are intact; the pump system and wiring system require repair). The Matra Fanuc Tape Cut W2 is a classic and extremely reliable CNC wire EDM machine manufactured in 1988. This machine combines the cutting-edge technology of the Japanese Fanuc control system with the precision engineering of the German Matra machine tool manufacturer. The machines can also be purchased separately upon request. Machine requiring repair: €1500; Operational machine: €4500. Bodpjzcww Refx Aa Isdh

Condition: used, Ground cable, copper round cable, copper cable, busbar wire -Manufacturer: Medi, copper round rope highly flexible -Length: approx. 100 m -Wire diameter: 3.00 mm -Quantity: 4x roll available -Price: per roll -Roll dimensions: Ø 160 x 160 mm Bdodotrbagjpfx Aa Ish -Total weight: 4.2 kg/pc.

Condition: excellent (used), Year of construction: 2011, operating hours: 6,800 h, functionality: fully functional, machine/vehicle number: 0339, travel distance X-axis: 400 mm, travel distance Y-axis: 280 mm, travel distance Z-axis: 250 mm, total height: 2,220 mm, total length: 2,395 mm, total width: 2,240 mm, wire diameter (max.): 0.3 mm, type of input current: three-phase, table width: 636 mm, overall weight: 3,950 kg, table length: 473 mm, table height: 995 mm, empty load weight: 3,950 kg, input voltage: 400 V, input frequency: 50 Hz, input current: 38 A, Equipment: cooling unit, documentation/manual, Good morning, Bedpfx Aaozzwrko Iedh For sale is a Sodick AG400L LN2W wire EDM machine. The machine is in perfect working order and was used for our own tooling production. It has been maintained in excellent condition and, despite its age, has only 6,800 operating hours.

Condition: excellent (used), Year of construction: 2021, FANUC ROBOCUT C400iC wire EDM machine + FANUC CRX-10iA robot, manufactured in 2021. FANUC 31i-WB CNC control. X, Y, Z LINEAR SCALES. AUTOMATIC DOOR. FANUC ROTARY TABLE. CHILLER UNIT. Travel: X 400, Y 300, Z 255, U +60, V +60 mm. Maximum taper 30°/80 mm. Maximum dimensions of the part to be machined: 730 x 585 x 250 mm. Maximum weight of the part to be machined: 500 kg. Wire spools up to 16 kg. Wire diameters: 0.10-0.30 mm. FANUC CRX-10iA ROBOT. VISION SYSTEM. 6 controlled axes. R-30iB Plus controller. Maximum load: 10 kg. Bdodpfxjz Hw Hcj Aa Ijh Maximum arm length: 1,249 mm.

Condition: reconditioned (used), Year of construction: 1984, functionality: fully functional, machine/vehicle number: 808, The machine is designed for straightening and cutting wire with a diameter of 4-10 mm and a tensile strength of 400-700 N/mm2, using appropriate straightening and cutting tools. The maximum length of the cut wire is 3000 mm. Wire coil: maximum coil weight 1500 kg, maximum coil height 1000 mm, internal coil diameter 450 mm. The total length of the machine, including the wire unwinder, is approximately 10 m. Machine weight: 8 tons. Location: In our workshop. Bjdpfx Aaezy Et Te Isdh

Condition: used, functionality: unexamined, Hydraulic double-column deep-drawing press with a draw cushion. Modified in 2002 by neff Pressen, Karlsruhe, according to VBG 7n5.2. Modification No. 55377, modification date 10/2002. Ram and table with T-slots, table with ejector bores for the draw cushion. Bjdsz A Uncepfx Aa Isdh Roller conveyor in front of the press area, light curtain on the operator side, pendant control unit with emergency stop for the ram and draw cushion. Hydraulic unit with control panel: pressure setting and manometer for the ram and draw cushion, pressure stage valves; separate control cabinet with operating panel. After-travel distance 12 mm, after-travel time 147 ms, minimum distance of the light curtain to the tool hazard area 294 mm. Location: Homburg (Saar), Germany. Inspection by appointment only. Price on request, net plus VAT, ex location; disassembly and loading upon agreement. All information without guarantee.