Used Drawing Machine for sale (64,918)

Condition: good (used), Year of construction: 2000, For wire diameters from 1 to 5.5 mm Drawing drum diameter: 400 mm Drawing speed max. 25 m/min For screw manufacturing/cold forming Lhjdpfxoy N Df Nj Ahbjg

Year of construction: 2004, condition: ready for operation (used), Ultrasonic die polishing machine / Wire drawing machine Esteves-DWD 107D16 Year of manufacture: 2004 230 V 20 kHz 4–6 bar Ledsyxxy Hopfx Ahbohg

Year of construction: 2010, condition: ready for operation (used), A large-format vacuum thermoforming machine Geiss with two window plates is available. Heating power: 360kW, connected load: 370kW, window plates: 2, min. window plate dimensions 1: 1360mm/860mm, max. window plate dimensions 1: 2460mm/1460mm, window plate adjustment 1 X/Y: 1100mm/600mm, min. window plate dimensions 2: 940mm/520mm, max. window plate dimensions 2: 2400mm/1400mm, window plate adjustment 2 X/Y: 1460mm/880mm, materials: PS/ABS/TPU/PMMA. Total system dimensions X/Y/Z: approx. 9150mm/2350mm/4000mm, total weight: approx. 15500kg, control: Siemens Simatic Panel PC, operating hours (April 2026): approx. 20100h. Documentation available. An on-site inspection is possible. Without vacuum pump, spare parts and temperature control unit. Expected to be available from October 2026. Ledpfx Ahjy Aafrjbehg

Condition: used, functionality: fully functional, machine/vehicle number: D20E/8022, Offer Number: D20E/8022 Lhsdjwi Tidjpfx Ahbeg Machinetype: multiple wire drawing machine - dry Info: straight through Make: VEB Type: 8 Block Constr. year: inlet wire diameter: 2,5 mm finished wire diamter: 0,8 mm number of drafts: 8 diameter of capstan: 400 mm speed -meters/sek: 15 m Location: Europe

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: M38L/9008, Offer Number: M38L/9008 Machinetype: pre-drawing machine Make: RMG Type: 910-2563-21 Constr. year: 2003 diameter range: 15,6 mm high-tensile: 14,1 mm capstan diameter: 900 mm drawing speed: 16 m/min output: 1500 kg Lhsdpjwxdk Djfx Ahbog Location: In our warehouse

Condition: used, functionality: fully functional, machine/vehicle number: D20E/7694, Offer Number: D20E/7694 Machinetype: multiple wire drawing machine - dry Make: SKET / MILL Type: 8 BLOCK Lhjdswi S Ixspfx Ahbog Constr. year: inlet wire diameter: 6,5 mm finished wire diamter: 1,6 mm number of drafts: 8 diameter of capstan: 550 mm and 650 mm speed -meters/sek: 8-12 Location: Europe

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: M38L/8943, Offer Number: M38L/8943 Machinetype: pre-drawing machine Info: only the draw drum Make: RMG Type: 67 Constr. year: 2020 Lodpfx Ahowi Tdzobjhg diameter range: 11 mm capstan diameter: 700 mm clear width: 150 (160) mm Location: In our warehouse

Condition: used, Year of construction: 1986, functionality: fully functional, machine/vehicle number: M38L/7658, Offer Number: M38L/7658 Machinetype: pre-drawing machine Make: RMG Type: 56-0776-85 Constr. year: 1986 diameter range: 8 mm drawing speed: 19 m/min Lsdpfjwi S R Tex Ahbohg mild steel: 9,5 mm high tensile: 8 mm capstan diameter: 600 mm drawing power: 1400 kg Location: In our warehouse

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: M38L/9009, Offer Number: M38L/9009 Machinetype: pre-drawing machine Make: FASTENER ENGINEERS Type: DTVA 2050-36 Constr. year: 1997 diameter range: max 18 mm feeding speed: max 15 m/m Lhjdpfx Aswxdkqohbeg capstan diameter: 900 mm output: 20 HP Location: In our warehouse

Condition: used, Year of construction: 1989, Model - 600/6 Year - 1989 Dies suitable for drawing low carbon steel wire rod entry diameter 5.5/6 mm max. They are two mirror dies and one has 5 steps and the other 6 steps. All with 600 mm shooting capstans. They both have a vertical skein for winding yarn onto loops. DC electrical equipment included. The dies will be sold in their "used, working, seen and liked" condition. Lsdpfx Aheyubh Robjhg

Condition: excellent (used), Year of construction: 1995, Combination Unit: Manufacturer: GSG Feeder: Type: 840.02-027 Crusher Descaler: Type: 663.02-017 Wire Range: Ø5.5-16mm For wire rod with approx. 40-60 daN/mm² strength Crushing and Bending Rollers: Carbide Inserts Adjustment with 0.37 kW - 1.15 A gear motor Brush Drive with 0.25 kW gear motor, n=293 rpm Connection Voltage: 380-420 V 50 Hz Dry Coating Unit: Type: BSG/T Filling: Calcium Stearate (e.g., Traxit Type: D S 51 E) Stearate Consumption: approx. 350 g per t of wire Drawing Speed: max. 15 m/s Electrical Power: 2x 0.55 kW gear motors Cassette: 2 slots (supplied with 1x roller block + 1x cassette) Type: PKG/T (TS) Cleaned rolled wire Wire strength approx. 40–60 daN/mm² Wire range max. inlet diameter 9.5mm, finished diameter 3.5–8.5mm Roll dimensions min. Ø115mm, max. Ø125mm, Bore diameter Ø82mm, width 15–25mm Cooling pin diameter 25mm Cooling water consumption approx. 600 l/h Drawing machine: Manufacturer: Koch Type: KHZ 5000 Year of manufacture: 1993 Serial number: 13.821 Number of draws: 1 draw per block Drawing drum: Ø700mm Tensile force: mechanical 5000 N Lodpfjr Nfvmex Ahbehg Wire material: mild steel wires Run-in strength: approx. 40 – 45 daN/mm² Maximum drawing range: Inlet diameter 5.0 – 8.5mm Cross-section reduction: 20 x 25% (mechanical gradation) Drawing speed: up to max. 7.0 m/s Brake: Twiflex, type: MRB Drive: AC motor/frequency converter, Siemens PN=110 kW, n=1485 rpm Spooler: Manufacturer: Koch Type: KHS 1250 Year of manufacture: 1993 Factory No.: 13741 Wire diameter: 5 – 8.5 mm Strength: approx. 55 – 70 daN/mm² Winding speed: V=7 m/s, adapted to the drawing machine Filling weight: approx. 3000 kg Spool drive motor: Three-phase motor with external fan Type: 1 PQ 6253 – 6 AA 70- Z A 15 + K 20 + C 14 + H 46 P=37 kW, n=1000-2000 rpm, IP54, design B3 Laying drive motor: 66-671U, 1.5 kW, 170 V, 9.8 A, 1680 rpm, IP 44, B5-200 With Attached tachometer generator TG 20, 20 V / 1000 rpm With attached spur gear SK 32, i=57.53, design B6 Hydraulics: Hydraulic excavator type: H13 AK Pneumatics: Twiflex disc brake type: MRB Pneumatic cylinder type: SPWG 28032-25mm stroke Dimensions: 3100 x 3000 x 1700 mm (L x W x H) without counterweight

Year of construction: 1968, condition: used, Renz DPS spiral drawing-in machine Machine number: 50223 Ledpjbq A D Refx Ahbjhg

Year of construction: 1994, condition: used, Technical details: plate thickness: 1,0 mm tube diameter: 60 / 80 / 90 / 100 / 110 / 120 / 130 mm wall strength: 0,6 / 0,7 / 1,0 mm tube pipe draw up length: 150 - 1000 mm control for program: SPS Simatic S 5 air pressure - required: 5 bar voltage: 380 V control voltage: 24 V total power requirement: 3,5 kW dimensions L x W x H: 1,2 x 1,0 x 1,6 m Pipe drawing-in machine, currently equipped for Ø 130mm. - e.g. for furnace pipes -insertion and removal of the workpieces manually Lhodpeu Icv Aefx Ahbsg -operation via control panel further features: Sheet thicknesses: 0.6 / 0.7 / 1.0mm workpiece length 150 - 1000mm div. Zubehör/Werkzeuge Ø 120 und Ø 130 und weiteres, wie im Foto *

Year of construction: 1987, condition: ready for operation (used), An old Schumag Aachen drawing machine without control is available. Drawing force: 100kN, drawing speed: 80m/min, material diameter range: 25mm-43mm. On-site inspection is possible. Lhsdov Tctuopfx Ahbjg

Condition: ready for operation (used), Year of construction: 1961, A Niehoff slide-free drawing machine is available. Processing diameter: 5mm-15mm, drawing speed range: 6m/min-24m/min, gearbox: manual gearbox, machine dimensions X/Y/Z: approx. 2600mm/2200mm/4000mm, weight: approx. 6500kg. The gearbox was completely overhauled in 2019 with new gears and new bearings. A new external lubricating oil pump was also installed in the same year. Documentation available. On-site inspection is possible. Lhedewq R N Ropfx Ahbeg

Year of construction: 2008, condition: ready for operation (used), A Geiss large-format vacuum thermoforming machine is available. Panel cutting min.: 1100mm/1300mm, max. panel cutting: 2100mm/1800mm, max. forming depth: 620mm. Additional panel format 1: min.: 850mm/750mm, max.: 1850mm/1250mm. Additional panel format 2: min.: 1050mm/800mm, max.: 2050mm/1300mm. Including a separate loading machine with pneumatic panel separating equipment, an automatic aligner for panel cuts in longitudinal and transverse direction, a pneumatic pusher for removing the molded parts from the loading unit, fully automatic central lubrication of the loading machine, several interchangeable pallets for window panel sets, a storage rack for window panels as well as a vacuum control with four independently adjustable flow stages and an air preparation system. Documentation available. On-site inspection is possible. Ljdpfxewih Are Ahbehg

Year of construction: 2021, condition: ready for operation (used), A semi-automatic vacuum skin packaging machine (tray sealer) Sealed Air for Darfresh skin packaging is available. Packaging capacity: 15/min, cycle performance: 1.5 cycles/min, film width: 562mm, max. product dimensions X/Y/Z: 670mm/470mm/50mm, tray length range: 135mm-700mm, tray width range: 120mm-520mm, tray height range: 5mm-50mm. Machine dimensions X/Y/Z: approx. 1050mm/1650mm/1250mm, weight: approx. 500kg. Documentation available. An on-site inspection is possible. Lhsdpfx Ahoxaphbjbeg

Year of construction: 2002, condition: ready for operation (used), Offered is a thermoform vacuum packaging machine / deep-drawing packaging machine from CFS. Air: 8bar / 500Nl/min, water: 2bar / 75l/min, weight approx. 2800kg. Inspection by arrangement possible. Lodpfx Ahjxx Ud Esbjhg

Condition: good (used), Manufacturer: unknown Year of manufacture: Type: Pipe straightening and drawing machine Pipe diameter: up to 10 mm Pipe length – stop for measurement: 6,300 mm Operation: hydraulic Application: for heating pipes Dimensions: 7,500 x 1,000 x 1,200 mm Lhjdpfx Ahoygv H Esbjg Weight: approx. 0.5 t

Condition: good (used), Single Head Capstan Block Wire Drawing Machine Maximum Inlet Wire's Diameter: 30 mm Lhodpjt Ixkzofx Ahbjg

Condition: ready for operation (used), Year of construction: 2022, operating hours: 2,751 h, functionality: fully functional, drawing speed: 20,000 mm/s, wire diameter (max.): 3 mm, Wire drawing machine with integrated steel fiber machine (Type: MBK-8/8 x 450 + ISFM) TECHNICAL DETAILS Number of coil uncoilers: 2 Wire drawing machines: 2 Steel fiber machines (integrated): 2 Cooling system (liquid): 1 unit General information Control system: Siemens PLC Operator panel: Siemens touch panel, Display: Waintek Total power including coiler: 150 kW Power supply: 3 × 380 V AC, 50 Hz Control voltage: 24 V DC Wire drawing system Input wire diameter: 2.2 – 3.0 mm Output wire diameter: 1.0 mm, 0.7 mm Drawing speed: 10 – 20 m/s Number of drawing blocks: 8 Jog speed: 1 m/s Diameter of all capstans: 450 mm Motor power per capstan: 18.5 kW Total cooling water consumption: approx. 17 m³/h at 2–3 bar Water temperature: 20–30 °C Compressed air requirement: 5 bar Cooling: Water (for matrix, capstans, blocks, and nozzle holders) Equipment: Drawing die holder Adjustability: Adjustable in all directions (up, down, left, right) Integration: Combined with soap box Die housing: 43 x 27 mm Sensors and measurement technology Sensor arm: Analog sensors Length measurement: Shaft encoder for length and speed measurement Cooling Cooling medium – matrix: Water Cooling medium – drawing blocks: Water Water consumption: approx. 17 m³/h Water pressure: 2–3 bar Water temperature: 20–30 °C Water inlet: Left side of the machine Water outlet: Right side Machine side Compressed air Compressed air requirement: 5 bar Drives Motor type: AC motors with IP55 protection Speed control: Frequency converter from Control Techniques Motor power per drawing block: 18.5 kW Motor for matrix holder: 0.3 kW Control system Control system: Siemens PLC Control unit: Industrial-grade touch panel (Siemens) Electrical cabinet Construction: Sheet metal housing with high protection rating Cooling: Air-cooled Protection rating: IP55 Electrical system Operating voltage: 3 × 380 V AC, 50 Hz Control voltage: 24 V DC Total power: 150 kW Color Machine body: Blue Moving parts: White Matrix holder: Black Control cabinet: White Integrated steel fiber machine (ISFM) Applicable wire diameters: 0.55 – 1.0 mm Production speed: 10 – 20 m/s (synchronized) with drawing line) Fiber types: Hooked, corrugated, flat (tool-dependent) Fiber motor power: 7.5 kW Fiber length: tool-dependent Packaging: Manually in bags or boxes on weighing pans Ljdpfx Aewmnhvjhbohg Fiber tool: Specified per dimension MACHINE DETAILS Program runtime: 2,751 h _____ EQUIPMENT - Two MBK-8/8x450 wire drawing machines - Two ISFM integrated steel fiber machines - Two coil unwinders - One liquid cooling system - Drawing blocks with water-cooled capstans and high-speed flow - High-quality components: Siemens PLC, SMC pneumatics, SKF bearings - Weighing system with automatic fiber filling switchover

Condition: like new (used), functionality: fully functional, Witech brushing machine (for wire) 4 pcs Year of production: 2015 The brush descaling/cleaning unit is designed for all wire qualities (low-high carbon) wire rod with diameter 5.5–8mm and wire speed up to max 4m/s Used for a very short time (1 year). Very good condition Price: 18,000 euro/piece Lhedpfxewu Da Rs Ahbsg

Condition: repair required (used), Year of construction: 2019, functionality: limited functionality, machine/vehicle number: 222971-1906-0457, travel distance X-axis: 300 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, overall weight: 90 kg, pressure: 6 bar, input voltage: 230 V, The Geiger (device with intermittent operation) MiniServo II 1.5 is a servo-motor-driven extraction device or sprue picker, specifically designed for use on injection molding machines. The device is used to precisely and quickly remove sprues or small molded parts from the mold and place them aside. Swivel axis (A): 0-105° Extraction stroke (X): 300 mm with linear guide and rack and pinion Vertical/lateral stroke (Y/Z): 800 mm linear guide and rack and pinion (part and gripper weight up to max. 1.5 kg) Servo-motor drive for the main axes Fail-safe mechanism (Y): electromechanical Lhodpfx Ahjy Tn Rdobsg Sliding console Gripper F Rotary module B (pneumatic) with stop 1 compressed air circuit for gripper 1 compressed air circuit for rotary module B 1 vacuum circuit with monitoring Programming assistant for programming standard extraction sequences with 1 compressed air circuit and 1 vacuum circuit Interface connection Euromap 67 (standard) Interface and power cable 5 m Placement area behind and in front of the machine RAL 9016 white Additional HT7 control, vacuum circuit, and consoles Sale only to commercial customers; warranty excluded.

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, machine/vehicle number: AM00222090802-01-03, - Function: Heat sealing of blister boxes - Main material of the machine: Stainless steel 304, aluminum alloy - Dimension: 1000mm x 715mm x 450mm - Weight: About 150 kg (excluding mould) Lodpfx Ajpfcy Eohbjhg - Power supply: 220 V 50 / 60 Hz single phase 3,5 KW - Compressed air supply: Pressure 5 bar - 8 bar, approx. 18 L / min - Seal size: 300mm x 400mm - Packing depth: Deepest 100mm - Production speed: Up to 12 cycles per minute depending on operator skill - Heat seal pressure: 300-1500kg adjustable Autovak is an international company with research, development and manufacturing facilities in Suzhou, China, and sales and service offices in the United States, Germany and Malaysia. The company has over 20 years of experience in the packaging of medical devices. From doing OEM for European packaging machine manufacturers to produce self-designed machinery and equipment with independent intellectual property rights and own brands, Autovak has accumulated a lot of know-how in the field of medical device packaging and online printing.

Condition: used, functionality: fully functional, OMEC 450 Manual Drawer Joint Milling Machine – after technical inspection, ready for operation Specification: • Condition: Used, after comprehensive technical inspection • Manufacturer: OMEC • Total power: 1.1 kW • Max milling width: approx. 35 cm • Manual head feed • Pneumatic clamps – 4 pcs. • Overall dimensions: 90 x 60 x 128 cm (W x L x H) Additional information: Lhedey R Ewpepfx Ahbsg • The machine is in good technical condition, ready for immediate use • Shown photos reflect the actual condition of the item for sale • Possibility to switch on and test the device on site • Free machine operation training (at the company headquarters) • The price stated in the listing does not include VAT and transport costs Financing and transport: • We arrange transport via MDD fleet, courier companies or external carriers • We offer financial support in the form of leasing or lease loan