Used Wire Winder for sale (3,142)

Condition: new, Travel X / Y / Z 600 / 400 / 310 mm Djdpjzgwq Rofx Ahgokp Travel U / V 150 / 150 mm Taper angle / workpiece height 15 degrees / 260 mm; 30 degrees / 110 mm Maximum workpiece dimensions W x D x H 1050 x 820 x 305 mm Maximum workpiece weight 1500 kg Table dimensions W x D 840 x 640 mm Table design Hardened 3-side table Possible wire diameters 0.1-0.3 mm Wire spool capacity 10 kg Automatic wire threader / wire chopper Yes / Yes Overall dimensions W x D x H 2687 x 3030 x 2150 mm Machine weight 3500 kg Mains voltage 3-phase 400 V/AC +/- 10%, 50/60 Hz, 13 kVA Filter tank capacity 860 l Filter particle size / elements 3 um / 2 Temperature control Dielectric cooling unit Filter dry weight 350 kg Generator power supply unit Regenerative transistor pulse type Generator cooling method Fully sealed / indirect air cooling Maximum output current 50 A Generator dimensions W x D x H 600 x 650 x 1765 mm Generator weight 240 kg Input method Keyboard, USB flash drive, Ethernet, 19 inch touchscreen Control system CNC, closed-loop Minimum command step X / Y / Z / U / V 0.1 um Minimum axis resolution 0.05 um Key equipment Tubular shaft drives with linear scales; Control M800 with 19 inch full-touch monitor; Hand pilot with configurable LCD monitor; Automatic vertical front door; Digital AE II generator; Ethernet/DNC/FTP; 2D Cam Magic on-board; Sleep mode

Condition: excellent (used), Wire electrode, welding wire, stainless steel welding wire -Net weight: 15 kg -Number: 1x package available Dedpscbkkasfx Ahgokp -Weight complete: 15.6 kg

Condition: used, Year of construction: 2006, Overview This Octopus 1800 BFTS ring pallet wrapper, manufactured in 2006, is designed for the automatic wrapping of palletized goods with stretch film. The machine is built as a ring-style wrapping system, where the film carriage rotates around the palletized load while the pallet is transported through the machine on integrated roller conveyors. The system is suitable for high-capacity end-of-line pallet wrapping in beverage and packaging lines. It is installed in a fully enclosed safety area with steel mesh guarding, access gate, operator control box and emergency stop. The machine was observed in an industrial palletizing area connected to conveyor and pallet transport systems. Operation is managed via a Siemens SIMATIC Panel. Dkjdpfjzb Azfex Ahgsp Technical Data - Manufacturer: TW Mima Packaging Systems / Oy M. Haloila Ab - Model: Octopus 1800 BFTS - Machine Type: Automatic ring pallet wrapper - Year of Manufacture: 2006 - Application: Stretch wrapping of palletized goods - Wrapping System: Horizontal ring wrapping system - Product Transport: Integrated motorized roller conveyor - Electrical Supply: 3 x 400 V - Operating Current: 20 A - Control Interface: Siemens SIMATIC Panel - Conveyor System: Roller conveyor through wrapping area - Construction: Heavy-duty steel gantry frame with yellow ring wrapping assembly - Location in Line: Palletizing / end-of-line packaging area - Condition: Used, installed in industrial production environment

Condition: used, Year of construction: 2012, Automatic wire threading, Travel range: x 600 mm y 400 mm z 310 mm Dkedpfxezcdwwo Ahgsp Includes cooler Machine is in excellent condition.

Condition: used, Year of construction: 2013, functionality: fully functional, GF AgieCharmilles Progress VP3 Year of manufacture: 2013 Travel ranges: X = 500 mm, Y = 350 mm, Z = 426 mm Travel ranges U/V axis: +/- 70 mm Dkjdpfszcdtxox Ahgjp Maximum taper: 30° at a height of 100 mm Available wire diameters: 0.15 – 0.33 mm Wire EDM machine with automatic wire threading and

Condition: excellent (used), Double wire straightener, with two straightening units. 1x ER7-9.0 1x ER5-9.0 Dkodpfozgvkvex Ahgep Straightening range (wire range) 7.0 – 9.0 mm Overall length approx. 500 mm Weight 18 kg Condition: very good

Condition: good (used), 3:1 Wire punching and locking system Stamping tool 3:1, round hole 4 mm Working width up to 420 mm Max. stamping capacity per the manufacturer: 30 sheets/80 g/m² foot switch operation manual Dksdszd Hkzepfx Ahgsp A small palette with 3:1 wire-binding elements is included in the delivery.

Year of construction: 2004, condition: excellent (used), Known K&S 8020 Specifications Specification Value Bonding type Automatic thermosonic ball bonder Wire material Gold wire (Au) Bond head Voice-coil direct-drive bond head Ultrasonic transducer 120 kHz unibody transducer with adaptive USG Vision system 20/20 vision system Camera Sony XC-75 CCD Bond pitch capability Sub-70 µm pitch kit available Bond area 2.0 × 2.3 in (≈ 50.8 × 58.4 mm) Optics Universal optics with increased depth of field Illumination LED Workholder 250-series heated manual workholder Dkjdezdgm Depfx Ahgjp Power 208 V, 50/60 Hz Control Software-controlled automatic bonding programs Typical Process Capability The 8020 was developed to provide: Fine-pitch bonding Long, low wire loops Improved process control High throughput for leadframe and laminate packages Automated vision alignment and pattern recognition These capabilities were key selling points of the 8000 family. Applications Plastic IC packages SOIC, QFP, TSOP Memory devices ASICs Hybrid microelectronics Chip-on-board assemblies Physical Characteristics Unfortunately, a complete factory datasheet with dimensions, weight, XY-table resolution, bond-force range, and supported wire diameters is not readily available in public archives. Most of the available information comes from listings of used equipment and K&S annual reports. If you need details such as: Bond force range (grams) Wire diameter range (e.g., 0.7–2.0 mil) XY positioning resolution Air requirements Maintenance manual Error codes or calibration procedures

Condition: used, The K&S 8030 was a wire bonder, likely a specialized or less common variant. Dkjdezdgl Hopfx Ahgep Based on the architecture of the 8000-series bonders, the typical specifications were approximately: Parameter Typical 8000-Series Capability Bonding method Thermosonic wire bonding Wire types Gold (Au), Aluminum (Al) depending on configuration Bond type Ball bonding or wedge bonding (model-dependent) Positioning Vision-assisted X-Y motion control Bonding area Typically 50–100 mm class work envelope Applications IC packaging, hybrids, chip-on-board, microelectronics Automation Programmable automatic bonding sequences

Condition: used, Year of construction: 1993, functionality: fully functional, Intended use: For the automatic winding of wire onto spools. The twin spooler is suitable for use behind a drawing machine and inline annealing furnace. Technical details: Control system: Siemens S5 Materials processed so far: CU - AL, AL alloys for spools 630 mm Number of spooling stations: 2 Technical condition: HMI, main motor controller, lay-on motor, and transport motor renewed Wire diameter min: 1 mm Wire diameter max: 3.5 mm Spool flange diameter max: 762 mm Total spool width max: 472 mm Spool bore diameter max: 127 mm Spool axis: horizontal Spool change: automatic Spool speed: 2200 min⁻¹ Automatic shutdown in case of wire breakage and full spool: yes Lay-on system: available Arbor clamping: hydraulic Drive type: DC motor Controller manufacturer: Siemens Drive power: 2 x 35 kW Drive speed: 2370 min⁻¹ Operating voltage: 380 V Frequency: 50 Hz Electrical cabinet: available Dksdpfx Aezf Ak Hohgep Additional data: Spool change: Fully automatic Empty spool feeding via conveyor belt. Full spool unloading via spool table and conveyor belt. Consisting of: NIEHOFF VM 400 dancer Electrical cabinet

Condition: good (used), Technical data for the shelf panel: Shelving system: SSI Schäfer Type: R 3000 Dksdpfjyzpiqjx Ahgsp Included in the scope of delivery: 01x shelf panel, used Material finish: Sendzimir galvanized For upright depth: approx. 600 mm Overall width: approx. 1,600 mm Overall depth: approx. 590 mm Overall height: approx. 30 mm Frame profile: approx. 25 x 25 mm Mesh size: approx. 68 x 50 mm Weight per piece: approx. 6.90 kg Note: Water-permeable (up to 70%), suitable for sprinkler systems and thus optimized fire protection. Air-permeable – allows for good air circulation, e.g. in deep-freeze warehouses. Light-permeable – ensures a bright working environment in the warehouse. Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any transportation or dispatch beyond collection is subject to additional costs, which can be requested from us separately depending on the delivery location and scope.

Condition: new, Included in delivery: 01x Wire mesh, new Manufacturer: Garantell Material finish: sendzimir galvanized Design: placed on top Total depth: approx. 1,118 mm Dkjdpfx Ahsyz Ir Rogep Inner depth: approx. 1,105 mm Upright depth: approx. 1,100 mm Beam support width: approx. 53 mm Clear supporting width: approx. 998 mm Width: approx. 1,340 mm Mesh size: approx. 110 x 95 mm Wire gauge: approx. 4.00 mm Weight per piece: approx. 6.75 kg Number of support bars: 05 pcs Support bar dimensions: approx. 998|50|1.25 mm Maximum load capacity: 500 kg Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about this item: This item is only offered for collection. If transport or shipping is required, it will incur additional costs, which can be individually requested from us depending on the place of delivery or the scope of delivery.

Condition: good (used), The scope of delivery includes: 106x wire mesh grating, new Material color: Sendzimir galvanized Load capacity: 500 kg; with uniformly distributed load Dksdsi Hkpdepfx Ahgsp Design: resting Depth: approx. 1,100 mm (direction of support bars) Width: approx. 1,150 mm Mesh size: approx. 100 x 60 mm Number of crossbars: 3 pcs. Weight: 5.00 kg | per piece

Condition: excellent (used), For sale is a professional wire cutting machine, the AAT Microfil, from the renowned German manufacturer Aston Abisolier Technik GmbH, Nuremberg. This device is designed for precise cutting of wires and cables to a specified length. Thanks to its adjustable feed speed and piece counter, it is ideal for use in electrical workshops, production facilities, and for the manufacture of cable harnesses. The manufacturer has specialized in wire processing equipment for many years. Dkodpfx Ajzkb T Rshgop Technical data: Manufacturer: Aston Abisolier Technik GmbH (AAT) Model: Microfil Country of manufacture: Germany Power supply: 220 V / 50 Hz Motor power: 90 W Drive with stepless speed control (Minidrive) Speed range: approx. 15–135 rpm Cutting length adjustment Length adjustment range on the panel: approx. 40–7200 mm Cut counter Stable, metal construction Applications: cutting electrical wires, cutting single- and multi-strand cables, preparing wires for further processing, cable harness production, electrical and electronics workshops. Condition: Used device, in good visual condition. It has normal signs of wear resulting from use. When connected to the power supply, the indicator light illuminates, and the machine starts. Sold in the exact condition as shown in the photos. Included in the set: AAT Microfil machine, power cord.

Condition: excellent (used), Year of construction: 2026, Wire reel, pasture wire reel, barbed wire winder, wire winder, wire winding machine, pasture fence winder, winding device -Drum diameter: 800 mm -Drum width: 990 mm Dedpfx Ahexvh Huegjkp -Drive: hydraulic -The device could be used with a corresponding front loader or three-point hitch -without front loader mount and hydraulic connections -Dimensions: 1020/1450/H830 mm -Weight: 318 kg

Condition: used, Roll guiding device WITELS-ALBERT Berlin, type ER 7 Guiding roller width: 30 mm Guiding roller diameter: 30 mm Djdszczvdjpfx Ahgskp Belt cross-section: approx. 1.5 x 10 mm or 0.5 x 25 mm - Individual adjustment for the 3 upper guiding rollers via wing nut and lock nut - Quick-release mechanism via eccentric lever for the 4 lower guiding rollers - 2 pre-forming guiding rollers, Ø 32 x 13 mm, mounted with a 90° offset - For guiding strip steel, last used for a belt cross-section of approx. 1.5 x 10 mm Space required L x W x H: 250 x 100 x 150 mm Weight: 5 kg Good condition

Year of construction: 2018, condition: ready for operation (used), An automatic slitter-rewinder Jurmet is available. Total operating distance: approx. 8900km, max. working width: 1600mm, min. parent roll width: 300mm, max. parent roll diameter: 1000mm, parent roll core inside diameter: 76mm/152mm, finished roll core inside diameter: 25.4mm/76mm, max. mechanical speed: 500m/min, max. web tension: 153N, knife positioning accuracy: +/-0.3mm, pressure roller width: 1600mm, max. product weight: 150g/m², max. product thickness: 220µm, operating hours: approx. 9850h. Documentation available. An on-site inspection is possible. Djdpfx Aezhnupehgokp

Condition: excellent (used), Year of construction: 2002, The machine is in excellent condition and ready for immediate use. Dodpfx Aszivmpshgskp

Condition: like new (used), AC15 3A 400V AC. 250V AC 6A Application: Machinery / Equipment Manufacturing Width: 40 mm Dodpfx Ahszfh Rxogokp Depth: 45 mm Length: 160 mm Weight: 348 g Condition: Like new

Condition: used, Year of construction: 2007, table length 500 mm table width 350 mm ampere 65 A Control AGIEVISION 5 CNC total power requirement 20 kW weight of the machine ca. 4000 kg dimensions of the machine ca. m A G I E (Switzerland) CNC - Controlled Wire Cutting EDM Machine Model AGIECUT PROGRESS V 3, Year 2007 Working range, X Y Z (=height) 500 x 350 x 426 mm Wire head, U-V axis (helical/taper cuts) + / - 30 °/ +/- 70 mm Resolution of axes 0.0001 mm Speed for positioning the axes up to 3 m/Min. Tolerances (If machine is new) 4 µ Workpiece dimensions, L x W x H max. 1.050 x 650 x 420 mm Max.weight of workpiece with/w.o. Dieelektricum 400/800 kg Clamping System Universal Beams with fixing holes Cutting wire Ø 0.2 – 0.33 mm Size of wire roll up to 25 kg Cutting speed of wire 60 – 300 mm/s. Dodpfet Hxbksx Ahgokp Total electrical load, approx. 20 kW - 400 V - 50 Hz Weight, approx. 4,000 kg Dimensions of machine approx. 2.4 x 2.2 x 2.4 m Accessories / Special Features • AGIEVISION 5 CNC Path Control for 5 Axis with OS 2 Machining Version and With various subprogrammes for a easier and faster designing of machining programmes, Technology devices, PP 123 Agie Geometric helps, DNC-Connection,Graficheck in 2 D a. 3 D, Rethreading of wire when wire is cutted-off, Optimizing the programmed pathes, PURECUT for reduction of Oxidation on workpiece surface,10 various program-languages, and many more features. • Mobile electronic hand held control unit for manual adjustments and set-ups for new workpieces, and separate standing control panel with CD-recorder and large monitor. • “DA” PROGRESS integrated Dieelectricum Aggregate with chiller and Filtering System, large tank incorporated in machine’s basement, Koax flushing, • AGIE Generator with 65 A Capacity and cutting performance up to 300/450 mm² • AGIE Automatic Wire Threading System with wire shredder and container mounted in backside of machine. Condition : Very good. The machine comes from a first class tool and die shop. It has been kept in very good order and was regularly maintained. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: used, Year of construction: 2008, functionality: unexamined, travel distance X-axis: 750 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 410 mm, For sale: a Mitsubishi FA30S wire erosion machine. Travel ranges (X, Y, Z): 750 × 500 × 410 mm Dkodpfx Ajziw Sajhgep Max. workpiece dimensions: Up to 1300 × 1000 × 405 mm Max. workpiece weight: Up to 3000 kg The machine has a Z-axis extension, allowing cutting up to 600 mm. Original price in 2008: 238,259.00 Loading with a forklift is possible.

Condition: excellent (used), Year of construction: 2004, WIRE BELT BLAST MACHINE MANUFACTURER: RÖSLER WIRE BELT BLAST MACHINE BRAND: RÖSLER Manufacturer: Rösler Type: RDGE 800-4 Year of manufacture: 2004 Passage width: 800mm Passage height: 550mm Spinning wheel: 4 pieces with frequency converter, Filter system: wet filter system With several inlet and outlet belts. Incl., control cabinet, complete documentation, etc. TOP condition! System is dismantled! WIRE BELT BLAST MACHINE BRAND : RÖSLER Brand: Rösler Type: RDGE 800-4 Year: 2004 Belt Width : 800mm Inlethigh: 550mm Turbine: 4 Pieces with Drivers Filter: Wet Filter With many inlet- and outlet transport belt Incld. Main Panel, complete Doku Very good condition! Machine it s now desmantly Price: Loading on Truck Price: Loading on Truck Warranty: 6-month function and warranty guarantee when commissioned by DECK Sarl. Spare parts supply for the next 10 years Warranty: 6-month Functions- and warranty from DECK Sarl. When DECK Sarl. make the assembly OPTIONAL: Delivery to your factory: Assembly / commissioning / training Assembly by foreman We also offer spare parts for Rösler, Schlick, Wheelabrator, Gietart etc. blasting machines! Dedpfev Idf Iex Ahgjkp We can offert for spare parts for Rösler, Shot Blasting Machines!

Year of construction: 2026, condition: new, Our KVK 5 is a semi-automatic rotary arm wrapper, which has the advantage over our wrappers with turntable that your pallets can be placed at ground level for the wrapping process. Equally ideal for light, unstable and heavy packaged goods, as there are no centrifugal forces and no load-bearing capacity to consider. In addition, the KVK 5 model is equipped with a pre-stretch system for 250% elongation. This pre-stretching system allows you to produce up to 3.5 m of film on the pallet from 1 m of film on the roll and reduce your material consumption enormously. With the KVK 5, there is only minimal contact tension, so that even light packages are not pulled off the pallet. The only thing that still has to be done manually with this wrapper is applying and cutting the film. The machine weight of almost 1000 kg shows how solid and stable this wrapper is. Dodoy U U T Iepfx Ahgjkp With its rotating arm, it can wrap pallets up to a maximum dimension of 1.00 x 1.20 x 2.40 m. With adjustable speeds of the rotating arm and film carriage, as well as a pre-stretching unit adjustable via potentiometer, you can adapt the automated wrapping perfectly to your product. Automatic recognition of your pallets (via photocell) is just as much a matter of course as adjustable head and foot wrapping. Programs are available for "up only" wrapping, "up & down" (cross wrapping) and "rainproof" wrapping. In addition to an optional photocell for the detection of dark packing goods or black film, this wrapper can be supplied either for wall mounting or with the feet shown. We recommend this model if it is important to you not to have to overcome a ramp with your goods - for example because they are too heavy or unstable. The fact that the rotating arm in this design rotates around the pallet also avoids any centrifugal force. Together with the low contact tension of the pre-stretch system, this also makes the KVK 5 ideal for very light packaged goods. For further information we have attached the technical data sheet as PDF to this advertisement !

Condition: used, Year of construction: 2001, overall weight: 3,350 kg, total length: 2,100 mm, total width: 2,000 mm, total height: 2,300 mm, CHARMILLES TECHNOLOGIES ROBOFIL 510with Charmilles control system. Travel paths X/Y/Z: 500 x 350 x 400 mm. Equipped with Erowa chuck, Erowa ITS rotary changer (24-fold), ManoSet XL, and a comprehensive clamping package. Includes additional flushing, water/water heat exchanger, and water cooling unit. Documentation available. Used, functional.Connection 3~ / 400 V / 50 Hz, power 10 kVA, current 15 A.Automatic wire tensioning, precise wire guidance, stable construction.Control console (Siemens), protective devices, emergency stop. Travel X-axis: 500 - mm Weight approx.: 3,350 kg Control: CNC-Steuerung Dimensions (LxWxH) approx.: 2100 x 2000 x 2300 mm Travel Y-axis: 350 - mm Travel Z-axis: 400 - mm Year of construction: 2,001 Condition: in working order Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: Yes Dkodjy S Axtspfx Ahgsp

Condition: good (used), Year of construction: 1998, functionality: fully functional, Type BF17B3S, Taiwan, 3 dies, year of manufacture 1998 max. wire diameter 12 mm max. wire cross-section 115 mm max. ejector stroke 90 mm max. ejector on the punch side 20 mm Motor approx. 15 kW Power max. 160 pieces/min, depending on the part to be manufactured 3rd station: optional deburring or forming Press Biauli BF17B, year 1998, 13 tons Oil pans 424 kg Conveyor belt 199 kg Control cabinet 205 kg Platform 186 kg Machine parts/accessories 565 kg We sell the above items with exclusion of liability for defects in materials and workmanship and without any warranty on functions or their dimensional accuracy. Dkodpjzd Da Hofx Ahgep No major defects are known to us, and the machine has functioned perfectly up to the present.