Used Wet Wipes for sale (857)

Condition: excellent (used), Year of construction: 2026, machine/vehicle number: 62401, functionality: fully functional, total length: 7,050 mm, total width: 2,550 mm, total height: 2,500 mm, overall weight: 3,400 kg, Dry wood chips, firewood and other coarse, wet biomass in a container that goes straight onto your truck, with warm air blown through the perforated floor. This Lauber TroCo drying container was built in 03/2026 and has been used only three times by us. It is in very good condition and ready to dry. Only one unit available. This is a single used machine, not ongoing stock. Once sold, it is gone. Best for: drying coarse, wet biomass such as wood chips, firewood and other coarse plant material, then moving the container to where you need it with a hooklift truck. Not suitable for: finely ground bulk material unless you verify it with us first. A warm air source and the air hose are not included, you need to supply them. What the specifications mean in practice: - 34 m3 volume - one large batch per drying cycle instead of many small ones - Hooklift system (locking dimension 3,890 mm) - load, move and unload with a standard hooklift truck, no crane needed on site - Perforated ventilation floor with round air connection at the door end - warm air is pushed up through the whole load, so it dries evenly - Fitted tarp cover - keeps rain out during storage and transport - Rear rollers and ladder steps on the front - easier to roll off and to inspect the load - Gross weight rating 21,000 kg - heavy loads are no problem for the frame Technical data (from the nameplate): - Manufacturer: Lauber Trocknungstechnik, type TroCo, serial no. 62401 - Year built: 03/2026 - Volume: 34 m3 - Length: 7,050 mm, height: 2,500 mm - Empty weight: 3,400 kg, permissible gross weight: 21,000 kg - Locking dimension: 3,890 mm - Colour: yellow - Safety inspection label (DGUV Rule 114-010) from the container builder is fitted, see nameplate photo Condition: Built 03/2026, used only three times by us, very good condition. Fully functional. Location: Stanserstrasse 50, 6064 Kerns (self pick-up, transport by arrangement). A hooklift truck, a suitable forklift or a crane is needed for loading. The container weighs approx. 3,400 kg empty. Kdedoz I Dziopfx Akpsu Why you can buy with confidence: - Built 03/2026, used only three times - Used by us, not rented out - Nameplate photos available, in-person inspection in Kerns OW by appointment Inspect before you buy: you may verify identity, condition and completeness at inspection or pickup. We guarantee what we control: the machine is what this listing says it is. We do not promise performance in an application we cannot assess, which is why we ask about yours first. Why buy now: This is a single used unit. Once sold, it is gone. Inspection is available in Kerns OW by appointment. First-buyer bonus: buy within the next two weeks (until 20 October 2026) and we take CHF 500 off the price. Valid until 20 October 2026, or until the machine is sold. Action: Send us your intended material, batch size and destination. We will confirm suitability and give you a transport estimate.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, operating hours: 5,800 h, power: 60 kW (81.58 HP), travel distance X-axis: 1,400 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,400 mm, workpiece height (max.): 1,400 mm, workpiece weight (max.): 2,000 kg, number of axes: 4, controller manufacturer: Siemens, controller model: 840D SL, torque: 1,146 Nm, rotational speed (max.): 8,000 rpm, Equipment: CE marking, documentation/manual, Machine name / type: HELLER / H 8000 Operating hours: 5800 Year of construction: 2020 Control unit: Siemens 840D SL Spindle: EPC-Unit (8.000 1/min, 60 kW, 1146 Nm) Tool clamping system: HSK 100 Tool magazine / places: Chain / 100 Kdodou Urgbepfx Akpeu Rotary table: 360.000° X 0,001° Coolant unit: KNOLL, KF 600, IKZ 70 bar, (work area flushing) Positioning range XYZ (mm): 1250 / 1200 / 1100 Pallet size (mm): 800 X 800 Workpiece clamping: mechanical Additonal options / Specifics: multi-spindle-head support (MSK); receiver for measuring probe (RENISHAW); fast drill fracture sensing (SBBK); interface exhaust system; screen blow-off device for operator door; codechip; Chip conveyor function check; Integrated process monitoring (IPM) + Monitoring function to minimize machine damage in case of collision; 3 colour status lamp; increased tool weight 35kg; scraping conveyor for wet machining; Coolant temperature control; Feed force display; Tangential control;

Condition: used, Year of construction: 2012, operating hours: 15,468 h, Equipment: ABS, all wheel drive, INTERNAL VEHICLE NUMBER: M669----HAKO MULTICAR TREMO CARRIER 3X DUMP TRUCK DIFFERENTIAL LOCK (4X4) ALL-WHEEL DRIVE SPREADER/WINTER SERVICE SNOW PLOW----KM: 15,552, WELL-MAINTAINED WITH SERVICE BOOK LAST INSPECTION ON 10/2025----4X4 (ALL-WHEEL DRIVE)----DUMP TRUCK BODY DUMP TRUCK DIMENSIONS: LENGTH: APPROX. 1.80 METERS WIDTH: APPROX. 1.25 METERS----DIFFERENTIAL LOCK----M+S TIRES----2 SEATS----THREE-SIDED DUMP TRUCK----TOW HITCH PREPARATION TOWING CAPACITY UP TO MAX. 3500 KG----ALL-AROUND BEACON LIGHT----SUSPENSION SEAT----HEATING----FRONT WINDSHIELD HEATING----KIF (KOMMUNALTECHNIK-INSTANDSETZUNG FERTIGUNGS GMBH) SNOW PLOW * SPRING-MOUNTED FOR PROTECTION AGAINST WEAR * YEAR OF MANUFACTURE: 2012 * COMPACT ELECTRO-HYDRAULIC SYSTEM FOR RAISING, LOWERING AND SWIVELING * DIMENSIONS (WIDTH HEIGHT): 1700/500 MM * WEIGHT: APPROX. 175 KG * JOYSTICK CONTROL ----SPREADER WITH DRY SALT/BRINE/WET SALT SYSTEM FROM KÜPPER-WEISSER * DIMENSIONS: 2105 X 1250 X 1160 MM * CAPACITY, FILL VOLUME: 630 L * YEAR OF MANUFACTURE: 2012 * SPREADING WIDTH: 1-6 METERS * UNLADEN WEIGHT: APPROX. 370 KG * DRY SALT CONTAINER: 800 L * BRINE CONTAINER: APPROX. 525 L * SPREADING MATERIAL: SALT, SAND, GRAVEL * SPREADING WIDTH: DEPENDING ON THE SPREADING MATERIAL * ASYMMETRIC ADJUSTMENT, ELECTRIC/HYDRAULIC * HYDRAULIC DRIVE * SPEED-DEPENDENT SPREADING * SCREW CONVEYOR SYSTEM * FOLDABLE COVER * ELECTRIC CONTROL BOX ----+++ Exclusive offer at Autohaus Mat GmbH: Up to €1,000 trade-in bonus? Your advantage for changing vehicles! +++ Contact us directly via WhatsApp at: Why Autohaus Mat GmbH? 1. Attractive trade-in: We handle the process quickly and fairly. With our trade-in bonus, you maximize the value of your vehicle and benefit when purchasing a new model. 2. Individual financing solutions: Would you like to finance your new vehicle? We offer tailor-made financing, adapted to your needs: * With or without a down payment * Flexible terms * Top conditions 3. Personal customer service: Our experienced team will accompany you from the first consultation to vehicle handover. 4. Our additional services: In addition to the vehicle purchase, we offer exclusive services for a smooth process: * Worldwide vehicle sales: Support with the purchase and export, wherever you are. * Transfer license plates: Provision of export or short-term license plates for transport. * Customs clearance: We take care of all formalities for export abroad. * Delivery of your vehicle: Safe and punctual delivery directly to you. Kedoz S S Hvspfx Akpodu Important: All offers are subject to availability. The vehicle description serves as a guide; only the information in the purchase contract or order confirmation is legally binding. For vehicles with VAT, a net sale for export is generally possible if all required documents are available. Net sales within the EU are now only carried out with VAT deposit and proof of registration in the destination country (Confirmation of Arrival), provided that all necessary documents are present. For our export customers, we offer the following services: * Export license plates for up to 30 days * Short-term license plates (5 days) * Preparation of the export declaration Contact us directly via WhatsApp at: Staff on site during opening hours.

Condition: excellent (used), Catalog number 8033 TECHNICAL DATA max. width of the workpiece – upper shaft 510mm max. width of the workpiece – lower shaft 450mm max. thickness of the workpiece, processed on both sides 200mm – from above: pulling roller ratchets 1 metal toothed pulling shaft 2 metal sequential pulling shafts 1 metal toothed pulling shaft pressure roller planing shaft 510mm, 4 knives, with the possibility of installing profile knives approx. 7.5kW smooth metal pulling shaft upper pressure roller at the outlet with 2 pulling rollers – from below: adjustable infeed table with guide planing shaft 300mm, 3 knives 3kW slip shaft, metal planing shaft 450mm, 4 knives 5.5kW Kedpoztziwsfx Akpjdu 2 smooth metal pulling shafts – from the rear: 2 side spindles 1) vertical right 150mm 4kW 2) vertical left 150mm 4kW spindle diameter 40mm spindles adjustable up/down, right/left spindles lockable axes arranged in alternating pattern electric height adjustment 2 types of feed speed + stepless 5-13, 13-36m/min diameter of the dust extraction socket 2x120mm, 150mm dimensions (length/width/height) 3200x1500x1600mm + control panel weight 1980kg – manufactured in Portugal – electric table lifting – ideal for processing both wet and dry wood – 3 planing shafts + 2 spindles – very good condition – used planer Net price: 38900 PLN Net price: 9047 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant fluctuations)

Condition: new, The ideal addition to your grinding/deburring machine (we also have the suitable deburring machine in stock!): Ulmatec Wet Separator Extracted materials: steel / stainless steel / aluminium, dry dust Kodjx Diiaepfx Akpodu All water-contact parts made of stainless steel. Control via display. Motor: 7.5 kW, 400 V, 50 Hz, IE3 Max. airflow: approx. 11,000 m³/h Max. negative pressure: approx. 4,000 Pa Inlet diameter: Ø 355 mm Discharge: Drain valve Filling: Automatic via solenoid valve Included: HEPA post-filter (for stainless steel processing) ATEX version (e.g. for aluminium processing) Excluding piping Maximum distance between extraction unit and machine: 10 m Connection to the on-site supply network is to be carried out by the customer.

Condition: new, Year of construction: 2025, pressure: 6 bar, compressed air connection: 6 bar, operating pressure: 6 bar, warranty duration: 12 months, total width: 1,500 mm, total height: 1,000 mm, total length: 1,500 mm, type of input current: three-phase, suction capacity: 1,500 m³/h, turntable diameter: 1,200 mm, Equipment: cabin, Wet-blasting machines PP-UM are designed to manage an homogeneuos mixture of shot, air, water and as requested detergent. The final result is a soft blasting process on the surface (in comparison to a dry blasting process). The common media blasting shots are corundum, silicates and glass beads. A special pump (heavy duty design for aggressive liquids) allows to maintain homogeneously the solution and delivers the mixture to the blasting gun/guns. The compressed air guarantee the correct shot impact on the surface (6-8 bars). Kedjwdgi Hspfx Akpjdu The process can be manual or fully automated as machines model PP-UA, complete equipped with in-out motorized work table, 2 axis gantry robot…) allow to set a fully automatic process. The machines can be equipped with paper-filter in order to remove the light oil contaminants to the recirculating solution (avoiding the degreasing of the pieces before the treatment).

Condition: used, Year of construction: 2020, Overview Krones Ergomodul modular container labeller. Containers run anticlockwise after the infeed in a frontal arrangement with two discharge starwheels. Finish RAL 9018 papyrus white in the wet-line section. Two docking positions at the carrousel, both in operation, accept the four labelling stations without tools, so cold-glue and self-adhesive labelling run on the same carrousel; height adjustment of the top part and each station is motorised with container type preselection. Technical data - Manufacturer: Krones - Model: Ergomodul - Year of manufacture: 2020 - Table pitch diameter: 1,200 mm - Rotary plates: 30 - Machine pitch: 125.6 mm - Main drive: controlled servo motor; Danfoss servo motors, container table - Cold-glue stations (2x): ERGOMATIC-CL, 8-shaft glue pallet carrousel, 8-section gripper cylinder d = 350 mm, unwinding length 40-130 mm, steel glue roller, integrated glue pump, gluing height 5-215 mm, housing stainless steel, AISI 304-similar - Self-adhesive stations (2x): AUTOCOL-TS 120, web speed 120 m/min, supply tolerance +/- 0.5 mm, four-axis stand (application height, container diameter, conicity, sloping position), two-reel holder with automatic splicing and end-of-reel detection, driven carrier-film rewinder, ionisation unit, reels up to 390 mm outer diameter, carrier film up to 150 mm - Container infeed: worm with servo drive; detects damaged and fallen-over containers - Container orientation: prepared for camera orientation at the carrousel (360-degree monitoring, one camera); electrical interface prepared, mechanical adjustment unit not installed - Coding: prepared for a laser coder at the carrousel, with laser guarding, safety switch, clock pulse, oil-free air supply - Conveyors: flat-top chain, 83.8 mm wide, stainless steel (AISI 304-similar); servo-driven infeed, PM-motor discharge, centralised frequency inverter control - Machine guarding: lifting doors at the carrousel (polycarbonate), hinged doors at the front table (tempered safety glass) - Pneumatics: Festo; Bosch-Aventics, Norgren Herion, SMC, Bürkert components - Electrical: 400/230 V, AC 3/N/PE, 50 Hz, 28 A full load, 50 A back-up fuse; UPS 400/230 V, 17 A - Media: 92.4 m³/h oil-free compressed air, 0.009 m³/h process water - Weight: approx. 10,600 kg total (carrousel 3,200 kg, front table 3,000 kg, 1,100 kg per cold-glue station, control cabinet 1,000 kg) Equipment - 2x ERGOMATIC-CL cold-glue labelling stations, interchangeable - 2x AUTOCOL-TS self-adhesive labelling stations, interchangeable - Stand-alone control cabinet with Krones iPanel operator terminal - Central lubrication (Lincoln progressive distributor with motor pump) - Ecopush rejection module - Handling parts set on trolleys The inspection unit (Checkmat) and the container coding device used with this labeller are not part of this machine. Kdodpjzzz N Hsfx Akpju Condition Used, still installed and under power in an operating line; on-site inspection possible before purchase. Availability Available now. The machine is in Belgium and will be dismantled and moved to our location in Germany; dismantling, loading and transport quoted on request.

Condition: used, driver cabin: other, gearing type: other, Year of construction: 2019, * Snail spreader * Yeti 1800, steel, painted * Control panel * Stainless steel access ladder * Wet salt spreading system * Folding roof, stainless steel * Winter service markings * Outline markings * Electric spreader pattern adjustment * ESK+ electric spreader pattern control * Preparation for RKL (rear coupling) * Ball joint frame mount for U290-U300 and U318 Other: * Trade-in and purchase of vehicles and machinery possible. * Sale price excludes transportation and delivery. * No liability for printing and typographical errors. * Subject to errors, changes, and prior sale. Kdodps Aa Atnofx Akpeu * Offer is non-binding. * Photos may vary. Price applies to the current condition. * All information without guarantee.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 630056, total width: 1,500 mm, overall weight: 5,200 kg, input voltage: 400 V, input frequency: 50 Hz, input current: 5 A, Equipment: documentation/manual, The ERNST Neptun EBB 1500 is a deburring machine for sheet metal processing, used to clean and round the edges of parts cut, punched, or burned with a laser. This machine enables the alternating processing of various materials, such as steel, aluminum, galvanized sheets, or materials coated with protective film, thanks to its flexible deburring roller and brush set. Main features of the ERNST Neptun EBB 1500: • Versatility: Processes parts made of different materials without the need for constant replacement of abrasive elements. • Functionality: Uses a flexible roller for deburring and a set of brushes (steel or lamellar) for dulling or rounding edges. • Precision: Allows for achieving identical and uniform radii on the edges. • Ideal solution for: Companies that process various materials where edge finishing is required after cutting. Kdodpsz Spmtsfx Akpsu Important information: The machine has different options. It can hold parts pneumatically or magnetically. Modules: E – Module with a deburring roller B – Stainless steel brush module – for dulling edges and removing oxides up to 6 mm B – Scotch/Vlies brush module – for rounding edges 0.1 – 0.4 mm and applying texture to the material surface. With this type of machine, material processing is done in a wet environment, so there is no need to retool or clean the machine, and it can work with various types of materials, such as aluminum, stainless steel, structural steel, etc., in continuous operation. The entire process takes place in a closed water system with the addition of a special emulsion, which ensures that neither the machine components nor the processed parts rust. From time to time, water needs to be replenished as it evaporates in the parts drying system and during filtration in a special filter within the machine.

Condition: new, fuel type: electric, Year of construction: 2026, machine/vehicle number: 2700x4500, Equipment: low noise, Main Technical parameters of the ball mill Drum diameter: 2400mm Drum length: 4500mm Motor power: 320KW Max input size: 25mm Capacity:35-60 t/h Weight: 72Tons Ball loading: 30Tons Besides this model, we also have the other models like 2700x4500, 3200x4500, 1830x13000mm, and so on, and we can also offer customerization service, we can also provide complete grinding solution for various industries like cement, quartz, ore beneficiation plant, and so on, welcome to contact us for more info. A ball mill is a common grinding machine used to grind and blend materials for use in mineral processing, including ore mining and the production of silica (silicon dioxide). When it comes to ore mining and silica grinding, the characteristics of the ore and the final product requirements will play a crucial role in selecting the appropriate ball mill. Here are some considerations for using a ball mill in ore mining and silica grinding: 1. Ore Characteristics: - Hardness: The hardness of the ore determines the type of ball mill that is most suitable. Harder ores may require a more robust and wear-resistant ball mill. - Particle Size Distribution: The initial particle size of the ore affects the grinding process. Different ores may require different approaches to achieve the desired particle size. 2. Silica Grinding: - Silica Content: If the primary goal is to grind silica, it's important to consider the initial silica content and the desired final particle size. Silica grinding often requires special attention to prevent excessive wear on the milling equipment. 3. Ball Mill Type: - Overflow vs. Grate Discharge: The type of discharge from the ball mill can impact the final product and the grinding efficiency. Overflow mills are generally used for most grinding applications, while grate discharge mills are more suitable for certain types of ores. 4. Mill Size and Capacity: - Mill Diameter and Length: The size of the ball mill should be selected based on the amount of material to be ground and the desired throughput. - Capacity: Ensure that the chosen ball mill has the capacity to handle the required volume of material efficiently. 5. Grinding Media: - Material and Size: The choice of grinding media (balls or cylpebs) and their size depends on the hardness of the ore and the desired final particle size. Different grinding media materials can impact the purity of silica during grinding. 6. Liners and Lifting Aids: Kodpfx Ajq Igiiekpodu - Liners: Consider the type of liners used in the ball mill to protect the shell and optimize the grinding process. - Lifting Aids: Some mills use lifting aids to enhance the grinding action and promote better mixing of the material. 7. Control and Monitoring Systems: - Automation: Utilize control systems to automate the milling process and ensure optimal performance. - Monitoring: Regularly monitor the milling process to adjust parameters as needed for consistent and efficient operation. 8. Safety Measures: - Safety Systems: Implement safety features to protect personnel and equipment during operation. Always follow the manufacturer's recommendations and guidelines for operation and maintenance to ensure safe and efficient use of the ball mill in ore mining and silica grinding applications.

Condition: used, first registration: 07/2023, fuel type: diesel, fuel: diesel, Mercedes-Benz Sprinter Pro 317 CDI Chassis *formerly a refrigerated vehicle!* * Engine: OM 654 DE 20 LA * Power: 125 kW / 170 hp * Emission class: EURO 6e * HVO compatible * 9-speed Tronic automatic transmission * ABS / ASR / ESP * Generator 14V / 250 A * Battery 12 V 70 Ah * Battery main switch, single-pole * Jump start contact * Terminal block for electrical connection * Outside temperature display * Engine oil level display during cold start * Fuel tank 93 liters * Fuel filter with water separator * Exhaust gas cleaning SCR generation 4 * Crosswind assist * Traffic sign assistant * Active lane keeping assist * ATTENTION ASSIST * Communication module (LTE) for digital services * Mercedes-Benz emergency call system * Breakdown management * Heat-protection glazing with band filter on the windshield * Rain sensor * WET WIPER SYSTEM * Electrically adjustable, heated, and foldable exterior mirrors * Semi-automatic climate control system TEMPMATIC * Multi-function steering wheel * Steering wheel adjustable in height and inclination * Vibration damper * Airbag driver and front passenger * Driver's seat, sprung seat, comfort with lumbar support and armrest * Heated driver's seat * Low driver's seat * Front passenger seat, two-seater * Seatbelt warning system for driver and front passenger * Grab handles for driver and front passenger * Rear wall paneling * DAB radio * Navigation system * USB socket 5V * Charging package, instrument panel * Smartphone integration package * MBUX multimedia system * 1-DIN slot in front under the headliner * Cup holder in front * Combined instrument with color display * Speedometer in km/h * Central locking * Smoker's package * Acoustic package * Electrical system for external bodywork * LED High Performance headlights * Fog lights with cornering light * Automatic headlight control * Side marker lights * Outline lights * Rear lights in partial LED technology * Adaptive brake light * Extended rear light wiring harness * Electrical system for trailer socket * Pre-wiring for 3rd brake light * Pre-wiring, configurable special module * Pre-wiring for switch panel * Pre-wiring for Remote Service Plus * Pre-wiring for Live Traffic Information * Pre-wiring for blind spot assist system (body manufacturer) Kdjdpfeyut H Ejx Akpsu * Pre-wiring for electrical reversing aid * Front mud flaps * Longitudinal member reinforcement * Tow eye, rear * Minimum curb weight 2381 kg * Additional structural work * Additional structural work 2 * Gross vehicle weight: 3,500 kg * Axle ratio: i=3.923 * Front axle with increased load capacity * HOLD function * Hill start assist * Stabilization Level II * Tire pressure monitoring system on front and rear axle, wireless * Tires: 235/65 R16C * Tire tread depth: 5/5 / 7/9 mm * Rims: Steel 6.5 x 16 * Wheelbase: 3,660 mm * Frame length: 3,350 mm * 1st hand! * German vehicle! Errors and prior sale excepted! Year of construction: 2023 Please contact Joannis...

Condition: not inspected (used), Year of construction: 2005, Without battery Manufacturer: Fimap Kdedpshzrbnsfx Akpju

Condition: excellent (used), CATALOGUE NUMBER 7556 Technical data: - min / max width of the workpiece 20 / 240mm - min / max height of the workpiece 8 / 160mm - number of spindles 4 1) horizontal lower 240mm 5.5kW 2) vertical right 160mm 5.5kW 3) vertical left 160mm 5.5kW 4) horizontal upper 240mm 7.5kW - all heads adjustable up/down, left/right - spindle diameter 40mm – from above: - 6 infeed, toothed rollers, including 2 double rollers - 2 outfeed, smooth, rubber rollers – from below: - side pressure before and after the roller in the lower bed - toothed, infeed roller, swivel in the lower bed before the first spindle - 2 pneumatic side pressure rollers - outfeed, metal, smooth roller - all rollers with pneumatic pressure - length of the infeed bed 2180mm - bed adjustable up/down - central lubrication - electric adjustment of the cutting depth - lifting motor 0.75kW - stepless speed adjustment of the feed rate on a frequency inverter 6-30m/min - feed motor 3kW - feed on Cardan shafts - enclosed in a cabinet + - diameters of the dust extraction nozzle 4x150mm - dimensions L/W/H 3750x1750x1800mm - weight 3300kg ADVANTAGES – with 4 heads – ideal for wet and dry wood Kodpszu R R Hefx Akpsdu – used machine, in perfect condition Net price: 66900 PLN Net price: 15558 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to higher fluctuations)

Condition: used, Year of construction: 2013, Overview This KOSME FLEXA 15/720 P3 MM is a rotary labelling machine for pre-cut labels, built in 2013. It carries two wet-glue labelling stations, and a third station adds hot-melt labelling, so one machine covers several labelling tasks. It suits bottlers who work with pre-cut labels and need to switch between different labelling jobs. Bottles enter and leave the labelling carousel via infeed and outfeed starwheels, guided through the carousel by container plates and top centring bells. Brush units and side pressing belts in the outfeed area press the labels on. The machine is fully enclosed by transparent safety doors and panels and is operated from a KOSME touch panel that shows machine and production data. The machine is set up with 4 formats, covering containers from 400 to 450 g/ml, and reaches an output of up to 15,000 bottles per hour. Technical data - Manufacturer: KOSME - Model: FLEXA 15/720 P3 MM - Year of manufacture: 2013 - Machine type: rotary labeller, wet glue and hot melt - Labelling stations: 2 x wet glue, 1 x hot melt - Label feed: magazines for pre-cut labels - Formats set up: 4, covering 400-450 g/ml containers - Output: up to 15,000 bottles per hour - Dimensions (L x W): approx. 3,800 x 3,000 mm - Operating hours: 33,275 h (HMI counter) - Containers processed: approx. 302.5 million (HMI counter) Equipment - Infeed and outfeed starwheels - Container plates and top centring bells - Brush units and side pressing belts in the outfeed - Transparent safety doors and panels - KOSME touch panel with production statistics Kjdpfx Akez Et Uyspedu Condition Used, with normal signs of wear and glue residue from production. The machine is still installed at the operator's site in Germany and can be inspected by arrangement. Availability Available after decommissioning in week 43 of 2026 (late October 2026). Location: Germany.

Condition: used, mileage: 252,000 km, first registration: 07/2023, fuel type: diesel, fuel: diesel, Mercedes-Benz Sprinter Pro 317 CDI Chassis *formerly a refrigerated vehicle!* Ksdpfsyut H Sjx Akpedu • Engine: OM 654 DE 20 LA • Power: 125 kW / 170 hp • Emission class: EURO 6e • HVO compatible • 9-speed Tronic automatic transmission • ABS / ASR / ESP • Generator 14V / 250 A • Fleece battery 12 V 70 Ah • Single-pole battery main switch • Jump start contact • Terminal block for electrical connection • Outside temperature display • Engine oil level display on cold start • Fuel tank 93 liters • Fuel filter with water separator • Exhaust gas purification SCR Generation 4 • Crosswind assist • Traffic sign assist • Active lane keeping assist • ATTENTION ASSIST • Communication module (LTE) for digital services • Mercedes-Benz emergency call system • Breakdown management • Heat protection glazing with band filter on the windshield • Rain sensor • WET WIPER SYSTEM • Electrically adjustable and heated exterior mirrors, foldable • Semi-automatic TEMPMATIC air conditioning • Multifunction steering wheel • Steering wheel adjustable in height and inclination • Vibration damper • Airbag driver and front passenger • Driver's seat suspension seat, comfort with lumbar support and armrest • Seat heating driver • Driver's seat box low • Front passenger seat two-seater • Seatbelt warning system driver and front passenger • Grab handles for driver and front passenger entry • Rear wall cladding • DAB radio • Navigation system • USB socket 5V • Charging package instrument panel • Smartphone integration package • MBUX multimedia system • 1-DIN compartment at the front under the headliner • Cup holder at the front • Combination instrument with color display • Speedometer in km/h • Central locking • Smoker's package • Acoustics package • Electrical system for external bodywork • LED high-performance headlights • Fog lights with cornering lights • Driving light assistant • Side marker lights • Outline lights • Rear lights in partial LED technology • Adaptive brake light • Extended rear light wiring harness • Electrical system for trailer socket • Pre-wiring electrical system for 3rd brake light • Pre-wiring electrical system, programmable special module • Pre-wiring switch panel • Pre-wiring Remote Service Plus • Pre-wiring for Live Traffic Information • Pre-wiring blind spot assist for bodybuilder • Pre-wiring electrical system for reversing aid • Mud flaps at the front • Longitudinal member reinforcement • Towing eye at the rear • Reference mass at least 2381 kg • Additional structural measures • Additional structural measures 2 • Gross vehicle weight: 3,500 kg • Axle ratio: i=3.923 • Front axle with increased load capacity • HOLD function • Hill start assist • Stabilization Level II • Tire pressure monitoring on front and rear axles, wireless • Tires: 235/65 R16C • Tire tread: 5/5 / 7/9 mm • Rims: Steel 6.5 x 16 • Wheelbase: 3,660 mm • Frame length: 3,350 mm - 1st hand! - German vehicle! Errors and prior sale reserved! Year of construction: 2023

Condition: ready for operation (used), Year of construction: 2011, operating hours: 77,128 h, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: SIEMENS, controller model: 840D solution line, spindle speed (max.): 8,000 rpm, spindle motor power: 43,000 W, number of slots in tool magazine: 50, number of axes: 4, This 4-axis HELLER H6000 horizontal machining centre was manufactured in 2011. It features a generous X, Y, and Z-axis travel of 1,000 mm each, along with a B-axis NC rotary table. The machine is equipped with a SIEMENS 840D control unit and has a maximum permissible clamping mass of 1,000 kg. If you are looking to get high-quality machining capabilities, consider the HELLER H6000 machine we have for sale. Contact us for further details. - Operating Hours (Betriebsstunden): 77,128 h- Effective Operating Time (Nutzlaufzeit): 57,997 h- Control Unit: SIEMENS 840D solution line- X-Axis Travel: 1,000 mm- Y-Axis Travel: 1,000 mm- Z-Axis Travel: 1,000 mm- Rapid Traverse Speed: 50,000 mm/min- Feed Speed: 1 - 50,000 mm/min- Acceleration: 5 m/s²- Max. Permissible Clamping Mass: 1,000 kg- Pallet Changing Time: 13 s- Pallet Changer: 2 pallet slots- Pallet Size: 630 x 630 mm (2 units in basic machine + 1 additional pallet)- Workpiece Diameter: 900 mm (1,290 mm)- Workpiece Height: 1,200 mm- Work Unit: PC 100 PowerCutting- Speed Range: 8,000 rpm- Max. Drive Power (S6-40%): 43 kW- Max. Torque (S6-40%): 822 Nm- Workpiece Table: NC Rotary Table, indexing 360,000 x 0.001°- Workpiece Setup Station: Manually rotatable pallet 4 x 90°- Workpiece Clamping: Mechanical (includes 5-fold media interface, hydraulic pressure 60 bar)- Tool Taper: HSK 100 A (DIN 69 893)- Tool Magazine: Chain magazine with 50 slots- Max. Tool Diameter (all slots occupied): 112 mm- Max. Tool Diameter (adjacent free slots): 280 mm- Max. Tool Length: 600 mm- Min. Chip-to-Chip Time (t2,3 according to VDI 2852): 4.2 s- Coolant & Chip Management: KNOLL scraper belt chip conveyor for wet machining, KNOLL KF 400 paper band filter coolant cleaning system (70 bar internal coolant supply / IKZ), work area flushing, drip tray drawing, window blow-off device- Tool Monitoring & Accessories: Fast drill breakage control, chain magazine tool shank cleaning device, process-integrated tool monitoring + collision protection monitoring, portable handwheel unit (Bedienhandgerät) with interface- Electrical Parameters: 400 V, 50 Hz, Nominal Current 87 A Kdodsz Spt Topfx Akpsu Technical Specification Taper Size HSK 100

Condition: used, maximum load weight: 15,880 kg, overall weight: 21,000 kg, axle configuration: 2 axles, first registration: 07/2014, total width: 2,500 mm, total height: 3,100 mm, * Spezialanhänger - Winterdienst- Blenkle IMS 3- Wechselsystem * Wechselaufbau Küpper Weisser * Full Wet * Solestreuer * Thermomat * IMSSN S00100 HFV * Aufbau BJ. 2014 * Aufbau 2165 kg Gewicht * 7 x Einzelbehälter * Einzelbefüllung * Zentralbefüllung * Zentralentleerung * Rundumlicht * Warnleuchten * Wechselfahrgestell mit BDF Aufnahme * Hersteller Blenkle Fahrzeugbau * Typ IMS 3 * Luftfederung * Mercedes Achse Kjdoyvwpzjpfx Akpodu * 50 ziger Zugöse * Zugdeichsel höhenverstellbar * Zwillingsreifen * 265/70R198,5 ca. 70-80% * 21000 kg GG * Behördenfahrzeug * deutsches Fahrzeug * Netto-Verkauf innerhalb der EU wird nur noch mit MWST Kaution und dem Nachweis der Zulassung im Bestimmungsland (Gelangensbestätigung) durchgeführt, * Verkauf nur an Gewerbe, Transport zum Hafen möglich, * Dieses Angebot ist unverbindlich und freibleibend. * Irrtum und Zwischenverkauf vorbehalten. Keine Gewähr auf Eingabefehler. * Besichtigungen nur nach Vereinbarung, * WhatsApp

Condition: used, Year of construction: 2012, Overview This Gernep Labetta 4/3/8 480 2A is a rotary cold glue labeller for glass bottles, built in 2012 by Gernep (Barbing, Germany). It was in service at a craft brewery and applies body, neck-ring and back labels at up to 9,000 bottles per hour. The machine ran on one format, a 0.30 L BNR beer bottle, and is supplied complete with format parts, a large stock of spare parts and the glue pump units. Technical data Kdjdpfoz I Rt Esx Akpju - Manufacturer: Gernep (Barbing, Germany) - Model: Labetta 4/3/8 480 2A - Year of manufacture: 2012 - Machine type: rotary cold glue (wet glue) labeller for glass bottles - Output: up to 9,000 bottles/h - Labelling stations: 2 - station 1 body label and neck-ring label, station 2 back label - Bottle format: 0.30 L BNR beer bottle (glass) - Direction of operation: left - Control: Siemens S7 Equipment - Two wet glue labelling stations for body, neck-ring and back labels - Format parts for the 0.30 L BNR bottle - Large stock of spare parts - Glue pump units - Complete technical documentation: operating manuals, spare parts lists, component manuals, electrical and mechanical drawings Condition Taken out of service in working condition in May 2026 and stored since. Regularly maintained by Gernep; major Gernep service in March 2025 with new bearings and wear parts. Everything required to put the machine back into operation is included. The machine can be moved by forklift or pallet truck. Inspection is possible by arrangement, and the former operators are available for questions. Availability Immediately available. Location: Netherlands.

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, Year of manufacture: 2012 Control system: Siemens 840D SL Spindle: SC63, 16,000 rpm, 40 kW, 96 Nm Tool clamping system: HSK 63 Tool magazine / positions (options): Chain / 54 Rotary table: 360,000° x 0.001° Coolant system: KNOLL, VRF 250, IKZ 50 bar, (work area flushing) Working area XYZ (mm): 630 / 630 / 630 Pallet size (mm): 500 x 400 Kdedpfx Aezpyg Tjkpou Workpiece clamping: Hydraulic, 60 bar Additional options, special features: Infrared receiver for measuring probe (RENISHAW); SBBK; Pneumatic support control at the workpiece setup station; Status indicator light; Chip conveyor for wet machining;

Condition: used, mileage: 48,494 km, power: 90 kW (122.37 HP), first registration: 04/2013, fuel type: diesel, empty load weight: 3,000 kg, maximum load weight: 2,400 kg, overall weight: 5,400 kg, axle configuration: 4x4, wheelbase: 2,400 mm, brakes: other, color: orange, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel, number of seats: 2, loading space length: 2,100 mm, loading space width: 1,500 mm, loading space height: 400 mm, Year of construction: 2013, operating hours: 3,945 h, Equipment: ABS, additional headlights, all wheel drive, cabin, differential lock, immobilizer system, power assisted steering, soot filter, trailer coupling, * German vehicle * First owner * Condition: see photos * Only 3,945 operating hours * Three-sided tipper body with winter service equipment, including salt spreader and snowplow * Wet salt spreader, Schmidt Type STRATOS B11-15 * Robust belt spreader * Wet salt system (FS 30) with side brine tanks * Container volume: 1.2 m³ * Spreading width: 1 to 8 m (gravel) or 1 to 6 m (salt) * Snowplow, Schmidt, Type FLL 18 * Clearing width: 2,090 mm at 30° * 4x4, all-wheel drive * Tipper dimensions: Length 2,100 mm x Width 1,500 mm x Height 400 mm * Original 48,494 km * Municipal plate * Front hydraulics + electrical system * Trailer hitch * 6-speed manual transmission * 2x trailer load: 3,500 kg * Trailer hydraulics * Cab with 2 suspension seats * Electrically heated mirrors * Radio CD * Work lights * Rotating beacon * Various attachments available at an extra cost, such as: front boom with mulcher FIEDLER FFA 400M-K - hedge trimmer Fiedler FH1500 - counterweight Fiedler - front-mounted sweeper Schmidt LKS-H * Differential lock * Leaf spring suspension * Raised main headlights * Raised front panel * Front lift * Wheelbase: 2,400 mm * Steel floor * Gross vehicle weight (GVW): 5,400 kg * Unladen weight: 3,000 kg * Payload: 2,400 kg * If sold to businesses and for export (non-EU and EU), the German commercial law applies. If a new TÜV inspection is desired, we will gladly provide you with a quote from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection, without a new DGUV, without a new SP, without a new UVV. You can find more trucks on our homepage at: We speak the following languages: German, English, Polish, Turkish. Note: We strongly recommend and offer the possibility of inspecting and examining the goods so that no false impressions arise in the buyer regarding the condition and suitability. Inspection and examinations are possible at any time by appointment and are expressly desired. All information is without guarantee. We are not liable for errors and incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Changes, prior sale and errors excepted. Kdsdpfx Aszz R Irokpsu

Condition: used, The Braibanti/Pavan extruder is designed for the continuous production of short-cut pasta, breakfast cereals, and pet food. The prepared dough is conveyed through a temperature- and moisture-controlled screw extruder toward the die, which ultimately defines the shape of the product. Extrusion takes place under controlled pressure and temperature to ensure consistency and structural integrity. At the end of the extruder, a motorized, speed-controlled rotating knife cuts the extruded product to the desired length. Prior to extrusion, the dough undergoes a structured preparation process. It begins with a two-step mixing system that combines dry and wet ingredients into a homogeneous mass. This system uses a single mixing arm with directionally adjustable paddles to ensure proper pre-conditioning and hydration. The final stage of preparation takes place in a high-performance mixer/kneader unit, which further develops the dough structure to achieve optimal plasticity, consistency, and elasticity-critical parameters for stable and high-quality extrusion performance. Continuous mixer - preconditioner PR210 ± 120L / screw Single mixing shaft with adjustable paddles, dual execution Motor 2 x 15 Kw - 970 rpm Liquid and dry ingredient supply Inspection and cleaning hatch Mixer VM210 ± 300L Single mixing shaft execution with adjustable paddles Motor 3 Kw Extruder BR210 Dual execution, 2 extrusion heads Kdodpfx Aez Rl Ecjkpju Motor 2 x 37Kw - 1482 rpm Gearbox Sumitomo Cyclo Double-walled extruder housing, suitable for cooling Production capacity (Pet food) calculated at 30-40 kg/min (depending on the product) Operating pressure ± 30-40 bar depending on the die Powered cutting head/chopping knife (motor 1.1 Kw -920 rpm) Dimensions (L x W x H): 5.000 x 2.200 x 2.400 mm without electric cabinet and controls

Condition: excellent (used), CATALOG NUMBER: 7503 TECHNICAL DATA: - max planing width 610mm - max planing height (two-sided) 200mm - max planing height (four-sided) 100mm Top: - 2 rubber feed rollers - 2 toothed feed rollers - metal feed roller - geared feed roller - pawls - pressure roller - 2 geared feed rollers - pressure roller - planing shaft 610mm, 4-knife, 7.5kW - pressure roller - smooth, metal feed roller - pressure roller - profiling shaft 7.5kW - pressure roller - rubber feed roller Bottom: - planing shaft, axis 35mm, axis length 130mm, 2.2kW - 2 guide strips - feed table - smooth feed roller - planing shaft 610mm, 4-knife (2 knives installed), 7.5kW - 2 smooth feed rollers - split, metal slip roller - side pressure roller Rear: - side spindles + 2 pressure rollers - 1) vertical right 95mm, 4kW - 2) vertical left 95mm, 4kW - spindle diameter 35mm - spindles adjustable up/down, right/left - adjustable rollers in the lower table - electric thickness setting - 6 feed speeds 7/9/11.5/14/18/23 m/min - feed motor 3.1kW - dust extraction port diameters 3x120, 3x160mm - dimensions (L/W/H) 3150x1900x1600mm - weight approx. 3500kg ADVANTAGES: – best wide-belt planer for wet and dry wood – ideal for processing timber, flooring, etc. – additional profiling shaft and planing shaft (undercutter) – 4 horizontal planing shafts + 2 vertical spindles – manufactured by the German brand KUPFERMUHLE – used planer, very good condition Kdsdpfx Akozr Ixcepeu Net price: 66900 PLN Net price: 15558 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to fluctuations)

Condition: used, Year of construction: 2011, 2011 Fomaco FGM 48F brine injector for poultry and fish – used Kdodsz Hqy Nopfx Akpeu Fomaco needle injector with 48 needles for chicken, poultry and fish. The Fomaco FGM 48F is a brine injector from the Danish specialist Fomaco (Food Machinery Company). With 48 needles it injects brine or marinade evenly into chicken, poultry and fish: more flavour, a more tender product and a consistent weight per piece. The product passes under the needle head on a plastic modular belt; injection pressure and belt speed are set to suit your product. Built in 2011, stainless steel construction, 3 x 400 V / 11 kW and 6 bar compressed air. The machine is in Emmeloord and can be viewed and tested with your product. Key features - 48 needles for an even distribution of brine or marinade - Suitable for chicken, poultry and fish, including delicate products - Plastic modular conveyor belt, quick to remove for cleaning - Stainless steel construction, built for the wet environment of a meat or fish processor - Injection pressure and belt speed adjustable per product - Built in 2011, 3 x 400 V / 11 kW, 6 bar compressed air Refurbishment if you want it Take the machine as it stands here, or let us go through it first in our own workshop: inspection, replacing needles and wear parts, cleaning and testing with your product. Exactly what is done is agreed per customer. Located in Emmeloord, the Netherlands. Available immediately – price on request. More photos and full details on our website: [](/) Machine type: Brine injector (needle injector) Condition: Used Number of needles: 48 Application: Chicken, poultry and fish Conveyor: Plastic modular belt Construction: Stainless steel Connection: 3 x 400 V, 50 Hz; 11 kW; max. fuse 35 A Compressed air: 6 bar

Condition: used, This listing is for a QuattroFlow QF150 Diaphragm Pump. The unit is in full working condition and is ready for immediate release. The Quattroflow 150S is a 4-piston Diaphragm pump, which is mainly used to pump water-like fluids that are typically handled in research-, pilot plant- or production facilities of the pharmaceutical, biotech,food or cosmetic research centres or plants Examples: • Solutions containing proteins (albumin, IgG, Clotting factors, monoclonal antibodies, enzymes, vaccines.) • Solutions of polymers or suspensions (silicon, latex, chromatography media) • Cell suspensions (bacteria, yeast, algae, fungi, mammalian cells) • colloidal solutions • Suspensions of viruses or phage • Dairy products • Gelatine • Supplements and ingredients for cosmetic and food Flow rate max.: Eccentric shaft 3° l/h (lpm) 100 (1.67) 100 (1.67) Eccentric shaft 5° l/h (lpm) 180 (3) 180 (3) Flow rate min.: Eccentric shaft 3° l/h (lpm) 1 (0.017) 1 (0.017) Eccentric shaft 5° l/h (lpm) 1 (0.017) 1 (0.017) Pressure: Temperature of fluid < 40°C bar (psi) 6 (87) 6 (87) Temperature of fluid > 40°C bar (psi) 4 (58) 4 (58) Temperature max.: Fluid °C (°F) 80 (176) 80 (176) CIP °C (°F) 90 (194) 90 (194) SIP °C (°F) 130 (260) 130 (260) Autoclave °C (°F) 130 (260) 130 (260) Suction lift dry at: 3000 rpm 3000 rpm Eccentric shaft 3° m (ft) 1-1,5 (3.2-4.9) 1-1,5 (3.2-4.9) Eccentric shaft 5° m (ft) 2-3 (6.6-9.8) 2-3 (6.6-9.8) Volume specifications: Approximated volume per revolution at free output ml 0,72 (3°) 1,2 (5°) 0,72 (3°) 1,2 (5°) Filling volume without connectors ml 15 15 Residual volume (after idle with highspeed motor) ml 1-3 1-3 Product wetted surface (approx.) cm² (inch²) 112 (17) 112 (17) Speed range pump rpm 10-3000 10-3000 Connection specification inlet (standard) Connector " 1/4" TC 1/4" TC Flange diameter mm (inch) 25 25 Internal diameter mm (inch) 4,7 4,7 Connection specification outlet (standard) Connector " 1/4" TC 1/4" TC Flange diameter mm 25 25 Internal diameter mm (inch) 4,7 (0.19) 4,7 (0.19) Position of connectors Inline Inline Number of flow directions 4 4 Diameter drive shaft mm 7 7 Product wetted materials (standard): Pump housing SS316L SS316L Valve plate SS316L SS316L Diaphragms Santoprene Santoprene Kdjdpexx Avpofx Akpou Valves EPDM EPDM O-rings EPDM EPDM Non-product wetted materials (standard): Pump housing SS316L SS316L Bearing housing SS316L SS316L Base plate SS316 SS316 Hood SS316 SS316 Dimensions pump with motor and housing: Length mm (inch) 257 (10,2) 277 (10-91) Width mm (inch) 164 (6,5) 200 (7,87) Height mm (inch) 185 (7,2) 195 (7,67) Weight pump with motor and housing kg (lb) 9,8 (22) 11,2 (25) IP protection class pump IP 54 54 Operating temperature range °C (°F) 0…40 (32…104) 10…30 (50…86)

Condition: used, mileage: 27,050 km, power: 125 kW (169.95 HP), first registration: 09/2025, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: automatic, number of seats: 3, total length: 6,967 mm, total width: 1,993 mm, total height: 2,616 mm, loading space length: 4,350 mm, loading space width: 1,770 mm, loading space height: 1,950 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, soot filter, Internal vehicle number: 6848X ----Why autonext? Over 400 cars & commercial vehicles immediately available. One of the largest vehicle exhibitions in the region. Over 1,000 satisfied customers annually - top customer ratings. Attractive financing & trade-in options possible. Complete vehicle range available at autonext. Mobility made easy. WhatsApp Chat: ### Offer: Financing from 4.99% ### ----Get a clear impression now: View the vehicle completely from the outside and inside in 4K quality via the YouTube link: Top condition! 1st owner, German vehicle, non-smoking vehicle Complete service history, exclusively maintained at Mercedes-Benz Van Maxi Automatic transmission Number of seats: 3 Winter package Load space package 2 Headlights LED High Performance Multimedia system MBUX (touchscreen 10.25") Parking package with reversing camera Navigation system Air conditioning system (Tempmatik) Reinforced front axle On request, we offer retrofitting of a trailer coupling for only 599 euros, and if possible, an increase in the trailer load to up to 3.5 tons. ---- Special equipment: Kdsds Aa E U Uepfx Akpju * Load space package 2 * Entry handle on rear pillar, left side * Load space light LED * Lashing rails in the load space - side wall at the partition * Winter package * Windshield wiper system (Wet Wiper System) * Seats in the cab: driver's seat heated * Seats in the cab: passenger seat heated * Exterior mirrors without integrated turn signal * Turn signals in the front side * Ceiling light in the load space with motion sensor * Driver assistance system: traffic sign recognition * All-weather floor mats * Vehicle without vehicle lowering * Grab handles A-pillars * Rear door (opening angle 270 degrees) * Hold function * Wooden floor in the load space * Folding cover for storage compartment * Charging package dashboard (USB ports and 12V socket additionally) * Cable duct on rear portal * Cable duct on side wall * Navigation system for multimedia system MBUX * Parking package with reversing camera * Headlights LED High Performance * Rail system for cargo securing * Socket (12V connection) in the cab * Step on the rear door * Paneling in the load/cargo compartment: wood high (up to the roof) * Paneling in the load/cargo compartment: wheel arch covering loadable (wood) * Lashing rails in the load space - side wall at the roof frame * Reinforced front axle * Pre-wiring, Parametric special module Standard equipment: 3rd brake light, storage compartment above the windshield, storage compartment below the dashboard on the passenger side, adaptive brake light, airbag on the passenger side, airbag on the driver side, acoustic package, hill start assist, trailer coupling: electrical system for trailer socket, drive type: rear-wheel drive, exterior mirrors electrically folding, exterior mirrors electrically adjustable and heated, both, exterior mirrors with blind spot assistant, outside temperature display, DAB tuner (digital radio reception), automatic switch-on of headlights, entry handle on rear pillar, right side, entry handle for sliding door on load compartment partition, driver assistance system: active brake assist, driver assistance system: active lane keeping assist, driver assistance system: Attention Assist (fatigue detection sensor), driver assistance system: breakdown management, driver assistance system: side wind assist, suspension: stabilization level I, generator 250 A, noise reduction measures