Used Wet Grinders for sale (2,017)

Year of construction: 2017, condition: like new (used), Mobile fluid bed dryer on a trailer skit. included clothfilter. dryer survice is 5M2 Hedpfxshflwgs Afnonh

Condition: new, Year of construction: 2025, -Smart Safety Clean Air Enhanced Efficiency. -Elevate your workplace safety with the TFON Airwet Series — a state-of-the-art wet-type air suction system engineered to eliminate sparks and dust produced during deburring processes. The Airwet Series significantly reduces the risk of fire and explosion, protecting both your workforce and your facility. -Fire & Explosion Prevention: Effectively minimizes hazardous particles and ignition sources right at the source -Enhanced Air Quality: Captures and removes airborne contaminants, creating a cleaner and healthier work environment Hnodpfxovg U Dxe Afneh Seamless Integration: Compact, space-saving design allows for easy installation into existing machinery and workflows. Increased Safety & Regulatory Compliance: Supports compliance with occupational health and safety standards, boosting overall operational safety

Year of construction: 1987, condition: ready for operation (used), Knife grinders for 800 kofama lignum strips Sharpening bar 800 used 1987 Rating: Table Model: Hnjdpfx Ajh S Upiefneh 800 Description: 800 grinders with a slat knife

Condition: new, functionality: fully functional, Year of construction: 2025, There are several types of ball mill grinding plants designed for different applications and industries. The choice of the specific type depends on factors such as the material being processed, the desired final product characteristics, and the production capacity required. Here are some common types of ball mill grinding plants: 1. Open Circuit Ball Mill: - In an open circuit ball mill, the material passes through the mill only once, and the finished product is obtained directly. This type is suitable for dry grinding and often used for cement grinding. 2. Closed Circuit Ball Mill: - Closed circuit ball mills have a separator, which separates the fine particles from the coarse ones. The coarse material is returned to the mill for further grinding, while the fine product is collected and sent to storage. This type is commonly used in mineral processing circuits. 3. Overflow Ball Mill: - Overflow ball mills discharge the slurry over a trunnion at the discharge end. This type is suitable for wet grinding or when the slurry has a high moisture content. 4. Grate Discharge Ball Mill: - Grate discharge ball mills discharge the slurry through the grate at the discharge end. This type is suitable for dry or wet grinding and is often used for grinding materials with high moisture content. 5. Peripheral Discharge Ball Mill: Hnsdpfx Afoq Nx Aljnoh - In a peripheral discharge ball mill, the grinding chamber is larger at the feed end, allowing the material to be discharged peripherally. This type is suitable for coarse grinding and often used for rod mills. 6. Planetary Ball Mill: - Planetary ball mills are designed for high-energy milling and are suitable for both dry and wet grinding. They have one or more grinding jars that rotate around a central axis, creating a planetary motion. This type is often used for laboratory applications. 7. Ball Mill with Ceramic Lining: - Some ball mills are lined with ceramics to reduce wear on the inner surface of the mill. This is particularly common in the production of ceramic materials, pigments, and refractories. 8. High-Energy Ball Mill: - High-energy ball mills use mechanical alloying processes to create new materials. These mills operate at high rotational speeds, causing the balls and the material being ground to impact with high energy. They are suitable for milling hard and brittle materials. 9. Air-Swept Ball Mill: - In an air-swept ball mill, the material is fed into the mill with ambient air, and the finished product is collected in a dust collector. This type is commonly used for coal grinding in the cement industry. 10. Tube Mill: - Tube mills are long cylinders with a charge of steel balls used for grinding raw materials, coal, and clinker. They can be open or closed circuit and are widely used in cement and mineral processing industries. 11. Continuous Ball Mill: - Continuous ball mills operate continuously, and the material to be ground is fed at one end and discharged at the other. These mills are suitable for grinding materials in a continuous process.

Condition: new, fuel type: electric, Year of construction: 2025, machine/vehicle number: 2700x4500, Equipment: low noise, Main Technical parameters of the ball mill Drum diameter: 2400mm Drum length: 4500mm Motor power: 320KW Hjdpfxjq Igiij Afnjnh Max input size: 25mm Capacity:35-60 t/h Weight: 72Tons Ball loading: 30Tons Besides this model, we also have the other models like 2700x4500, 3200x4500, 1830x13000mm, and so on, and we can also offer customerization service, we can also provide complete grinding solution for various industries like cement, quartz, ore beneficiation plant, and so on, welcome to contact us for more info. A ball mill is a common grinding machine used to grind and blend materials for use in mineral processing, including ore mining and the production of silica (silicon dioxide). When it comes to ore mining and silica grinding, the characteristics of the ore and the final product requirements will play a crucial role in selecting the appropriate ball mill. Here are some considerations for using a ball mill in ore mining and silica grinding: 1. Ore Characteristics: - Hardness: The hardness of the ore determines the type of ball mill that is most suitable. Harder ores may require a more robust and wear-resistant ball mill. - Particle Size Distribution: The initial particle size of the ore affects the grinding process. Different ores may require different approaches to achieve the desired particle size. 2. Silica Grinding: - Silica Content: If the primary goal is to grind silica, it's important to consider the initial silica content and the desired final particle size. Silica grinding often requires special attention to prevent excessive wear on the milling equipment. 3. Ball Mill Type: - Overflow vs. Grate Discharge: The type of discharge from the ball mill can impact the final product and the grinding efficiency. Overflow mills are generally used for most grinding applications, while grate discharge mills are more suitable for certain types of ores. 4. Mill Size and Capacity: - Mill Diameter and Length: The size of the ball mill should be selected based on the amount of material to be ground and the desired throughput. - Capacity: Ensure that the chosen ball mill has the capacity to handle the required volume of material efficiently. 5. Grinding Media: - Material and Size: The choice of grinding media (balls or cylpebs) and their size depends on the hardness of the ore and the desired final particle size. Different grinding media materials can impact the purity of silica during grinding. 6. Liners and Lifting Aids: - Liners: Consider the type of liners used in the ball mill to protect the shell and optimize the grinding process. - Lifting Aids: Some mills use lifting aids to enhance the grinding action and promote better mixing of the material. 7. Control and Monitoring Systems: - Automation: Utilize control systems to automate the milling process and ensure optimal performance. - Monitoring: Regularly monitor the milling process to adjust parameters as needed for consistent and efficient operation. 8. Safety Measures: - Safety Systems: Implement safety features to protect personnel and equipment during operation. Always follow the manufacturer's recommendations and guidelines for operation and maintenance to ensure safe and efficient use of the ball mill in ore mining and silica grinding applications.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, spindle speed (max.): 12,000 rpm, feed length X-axis: 400 mm, feed length Y-axis: 400 mm, feed length Z-axis: 250 mm, type of input current: three-phase, rotational speed (max.): 12,000 rpm, grinding spindle speed: 12,000 rpm, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 250 mm, grinding spindle motor power: 10,500 W, power: 10.3 kW (14.00 HP), input current: 30 A, input frequency: 50 Hz, input voltage: 400 V, year of last overhaul: 2024, Equipment: rotational speed infinitely variable, For Sale: 2008 Schütte 305 Linear 5-Axis CNC Tool & Cutter Grinder | Siemens 840D | New Spindle | Medical-Grade Machine Now available at Used Machine Tools Ireland Ltd, this high-precision Schütte 305 Linear 5-Axis CNC Tool and Cutter Grinder (2008) is an exceptional solution for tool regrinding, complex geometry grinding, and high-volume production. Previously in operation at a leading medical device company, this machine has been meticulously maintained, with a brand-new spindle installed in 2024. This grinder is fully equipped with modern tooling support systems including fire suppression, Absolent mist extraction, Ebbco coolant filtration, and in-line chiller, making it production-ready for demanding grinding applications. 🔹 Manufacturer: Alfred H. Schütte 📅 Year of Manufacture: 2008 📍 Location: Ireland ⚙️ Condition: Very Good – Ex-medical device use 🚀 Availability: Immediate 🔧 Spindle: Replaced in 2024 🛠️ Technical Specifications: Machine: Schütte 305 Linear CNC Tool & Cutter Grinder Machine Type: 5 Axis CNC Grinder Model: 305 Linear Year: 2008 Control: Siemens 840D with Windows XP Axes: 5-Axis CNC X-Axis Travel: 400 mm X-Axis with Tailstock: 400 mm Y-Axis Travel: 400 mm Z-Axis Travel: 250 mm Spindle Motor Power: 14 HP Spindle Speed: Up to 12,000 RPM Software: SIGS – Schütte Integrated Grinding Software Condition: Very good – Ex-medical device industry Spindle Replaced: 2024 (new) ⚙️ Equipped With: 🔥 Fire Suppression Unit Hnodpjw Nyc Asfx Afnoh 🌫️ Absolent Mist Extraction System 💧 Ebbco Coolant Filtration Unit ❄️ Ebbco In-line Chiller 🧠 Advanced SIGS Grinding Software 🛡️ New Spindle (2024) 💡 Ideal Applications: Tool & cutter regrinding Custom tooling production Precision carbide & HSS grinding Medical, aerospace, and high-specification manufacturing Schütte 305 Linear for sale Used 5-axis CNC tool grinder Tool and cutter grinder Siemens 840D Schütte SIGS software grinder CNC tool regrinding machine Ireland Schütte tool grinder with mist extraction Medical-grade grinding equipment High-performance cutter grinder 5-axis

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, spindle speed (max.): 12,000 rpm, feed length X-axis: 400 mm, feed length Y-axis: 400 mm, feed length Z-axis: 250 mm, type of input current: three-phase, rotational speed (max.): 12,000 rpm, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 250 mm, grinding spindle motor power: 10,500 W, power: 10.3 kW (14.00 HP), input current: 30 A, input frequency: 50 Hz, input voltage: 400 V, grinding wheel speed: 12,000 rpm, year of last overhaul: 2024, Equipment: rotational speed infinitely variable, For Sale: 2008 Schütte 305 Linear 5-Axis CNC Tool & Cutter Grinder | Siemens 840D | New Spindle | Medical-Grade Machine Now available at Used Machine Tools Ireland Ltd, this high-precision Schütte 305 Linear 5-Axis CNC Tool and Cutter Grinder (2008) is an exceptional solution for tool regrinding, complex geometry grinding, and high-volume production. Previously in operation at a leading medical device company, this machine has been meticulously maintained, with a brand-new spindle installed in 2024. This grinder is fully equipped with modern tooling support systems including fire suppression, Absolent mist extraction, Ebbco coolant filtration, and in-line chiller, making it production-ready for demanding grinding applications. 🔹 Manufacturer: Alfred H. Schütte 📅 Year of Manufacture: 2008 📍 Location: Ireland ⚙️ Condition: Very Good – Ex-medical device use 🚀 Availability: Immediate 🔧 Spindle: Replaced in 2024 🛠️ Technical Specifications: Machine: Schütte 305 Linear CNC Tool & Cutter Grinder Machine Type: 5 Axis CNC Grinder Model: 305 Linear Year: 2008 Control: Siemens 840D with Windows XP Axes: 5-Axis CNC X-Axis Travel: 400 mm X-Axis with Tailstock: 400 mm Y-Axis Travel: 400 mm Z-Axis Travel: 250 mm Spindle Motor Power: 14 HP Spindle Speed: Up to 12,000 RPM Software: SIGS – Schütte Integrated Grinding Software Condition: Very good – Ex-medical device industry Spindle Replaced: 2024 (new) ⚙️ Equipped With: 🔥 Fire Suppression Unit 🌫️ Absolent Mist Extraction System 💧 Ebbco Coolant Filtration Unit ❄️ Ebbco In-line Chiller 🧠 Advanced SIGS Grinding Software 🛡️ New Spindle (2024) 💡 Ideal Applications: Tool & cutter regrinding Custom tooling production Precision carbide & HSS grinding Hnjdpfx Asw Nyciefnjh Medical, aerospace, and high-specification manufacturing Schütte 305 Linear for sale Used 5-axis CNC tool grinder Tool and cutter grinder Siemens 840D Schütte SIGS software grinder CNC tool regrinding machine Ireland Schütte tool grinder with mist extraction Medical-grade grinding equipment High-performance cutter grinder 5-axis

Condition: ready for operation (used), Vermogen slijpsteen: 15 kWt Besturing: Siemens Sinumerik 840 C Siemens drive: 6SN1145-1BA00-OCAO Worklength with magnetic table: 1270 mm Grindingwidth: 610 mm Longitudinal travel X-axis (autom.): 1310 mm Cross-travel Y-axis (autom.): 565 mm Travel Z-axis (autom.): 470 mm Dimensions of the table: 1215 x 500 mm Hsdpfx Asxl Hxhefnonh Distance between table -- spindlecentre: 680 mm Max dia grindingstone: 400 x 100 x 127 mm Spindlespeeds: rpm Motorpower: 30 / 47 kWt Tension needed: 380V - 50Hz Cooling system: yes

Condition: new, drill diameter 2.0 - 20.0 mm lip angle 90 - 135 ° turning speeds 4800 U/min voltage 230 Volt engine output 0.12 kW Hnedpoxablxofx Afnjh weight 8.6 kg range L-W-H 285 x 130 x 170 mm The handy DG 20 M drill grinding machine is ideal for grinding twist drills made of HSS, cobalt and hard metal. Thanks to the adjustable tip angle of 90° to 135°, this model can be used universally for 2-edged twist drills. Properties: - For grinding HSS and hard metal twist drills from 2 - 20 mm - ER 20 and ER 25 collets also enable clamping of intermediate sizes - Optimum grinding result thanks to the specially guided collet - Includes device for sharpening the drill tip - Universally adjustable tip angle from 90° - 135° - Fast and easy grinding process Scope of delivery: - CBN grinding wheel - ER 20 collets, 3 - 12 mm * 11 pieces (3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 /12 / 13 mm) - ER 25 collets, 14 - 20 mm * 7 pieces (14 / 15 / 16 / 17 / 18 / 19 / 20 mm) - Collet holder ER 20 or ER 25

Condition: good (used), Year of construction: 2012, Used Wilson Xsharp punch tool grinding machine Hjdoyi E Uqopfx Afnonh Type: Xsharp Year of manufacture: 2012 Including cooling system

Condition: like new (used), Year of construction: 2012, 12 station, Siemens Sinumerik 840D control, load / unload, VAS air cleaning unit, (2012) Technical Data - Grinding Spindles (With Two spindle ends) Interface - Cone ø 31.75mm Performance 100% / 40 % ED - 11.5 / 14.5kW Standard rotation speed - 8,000rpm Option: One spindle end Interface - HSK 50E Performance - 100% / 40% ED - 11.5/ 14.5 kW Standard rotation speed - 8,000rpm Option: One spindle end Interface - HSK 50E Performance 100% / 40% ED - 11 / 12 kW Standard rotation speed - 18,000rpm Option: One spindle end Interface - HSK 80E Performance 100% / 40% ED - 30/30 kW Standard rotation speed - 8,000 rpm Option: High Frequency spindle - On request Machine Table Clamping surface - 1000 x 500mm Number, distance and width of the T slots - 9 / 50 / 12H7mm Work Range X- Axis - 700mm (optional) 1000mm (optional) 1200mm Y Axis - 410mm Z Axis - 500mm C Axis angle of rotation - 320° Option: X3 - auxilliary axis Work range - 400mm Probing system and feed Resolution of linear axes - 0.0005mm Rapid feed of linear axes - 30,000mm/min Resolution of rotary axes - 0.001° Rotation speed of C Axis - 400rpm Rotary axis ( A axis) Standard tip height - 175mm Rotation speed as spindle - 2600rpm Standard interface - ISO SK 50 / centering 70H5 Optional - HSK 100 / 80 / 63 / 50 Tool Changer option HSK50E Number of tools / Diameter of tools Inner wheel - 5 / 300mm to 9 / 100mm Outer wheel - 7 / 300mm to 16 / 100mm HSK80E Number of tools / Diameter of tools Inner wheel - 5 / 300mm to 8 / 100mm Outer wheel - 7 / 300mm to 14 / 100mm Workpiece size Diameter 340mm Length 550mm Length between tips 500mm Electrical supply Operating voltage 400V / 50Hz fused to 80 A Controller Siemens contouring control - Sinumerik 840 DSL Pneumatics Operating pressure - 6 - 10bar Weight Total weight depending on equipment 10,000kg or more Hnodpfx Afsv Igghensh Floor space requirement Length x width (standard) 3227 x 2700mm Height during operation 3550mm Height with option of coolant nozzles 3810mm (min hall height 4100mm)

Condition: like new (used), Year of construction: 2010, Haas Multigrind CB multi axis CNC grinder, 12 station, Siemens Sinumerik 840D control, load / unload, LTA industrial air cleaning unit, (2010) Technical Data - Grinding Spindles (With Two spindle ends) Interface - Cone ø 31.75mm Performance 100% / 40 % ED - 11.5 / 14.5kW Standard rotation speed - 8,000rpm Option: One spindle end Interface - HSK 50E Performance - 100% / 40% ED - 11.5/ 14.5 kW Standard rotation speed - 8,000rpm Option: One spindle end Interface - HSK 50E Performance 100% / 40% ED - 11 / 12 kW Standard rotation speed - 18,000rpm Option: One spindle end Interface - HSK 80E Performance 100% / 40% ED - 30/30 kW Standard rotation speed - 8,000 rpm Option: High Frequency spindle - On request Machine Table Clamping surface - 1000 x 500mm Number, distance and width of the T slots - 9 / 50 / 12H7mm Work Range X- Axis - 700mm (optional) 1000mm (optional) 1200mm Y Axis - 410mm Hedpfx Afov Igg Ionsnh Z Axis - 500mm C Axis angle of rotation - 320° Option: X3 - auxilliary axis Work range - 400mm Probing system and feed Resolution of linear axes - 0.0005mm Rapid feed of linear axes - 30,000mm/min Resolution of rotary axes - 0.001° Rotation speed of C Axis - 400rpm Rotary axis ( A axis) Standard tip height - 175mm Rotation speed as spindle - 2600rpm Standard interface - ISO SK 50 / centering 70H5 Optional - HSK 100 / 80 / 63 / 50 Tool Changer option HSK50E Number of tools / Diameter of tools Inner wheel - 5 / 300mm to 9 / 100mm Outer wheel - 7 / 300mm to 16 / 100mm HSK80E Number of tools / Diameter of tools Inner wheel - 5 / 300mm to 8 / 100mm Outer wheel - 7 / 300mm to 14 / 100mm Workpiece size Diameter 340mm Length 550mm Length between tips 500mm Electrical supply Operating voltage 400V / 50Hz fused to 80 A Controller Siemens contouring control - Sinumerik 840 DSL Pneumatics Operating pressure - 6 - 10bar Weight Total weight depending on equipment 10,000kg or more Floor space requirement Length x width (standard) 3227 x 2700mm Height during operation 3550mm Height with option of coolant nozzles 3810mm (min hall height 4100mm)

Condition: ready for operation (used), additional equipment features: yes, Besturing: Siemens Sinumerik 840 C Siemens-aandrijving: 6SN1145-1BA00-OCAO Worklength with magnetic table: 1230 mm Worklenth without magnetic table: 1260 mm Grindingwidth: 600 mm Longitudinal travel X-axis (autom.): 1260 mm Hnjdpfxsxuwxws Afneh Cross-travel Y-axis (autom.): 630 mm Travel Z-axis (autom.): 477 mm Dimensions of the table: 1215 x 500 mm Distance between table -- spindlecentre: 680 mm Max dia grindingstone: 406 x 50 x 127 mm Spindlespeeds: rpm Motorpower: 22 kW Cooling system: yes

Condition: used, total height: 2,000 mm, total length: 2,600 mm, total width: 1,800 mm, Empty weight: 3.500 kg - Documentation available: Yes - CE certificate present: No - Drive system: Conventional - Power [kW]: 4.5 - X-axis travel [mm]: 600 - Y-axis travel [mm]: 350 - Z-axis travel [mm]: 510 - Table width [mm]: 800 - Table depth [mm]: 350 - Magnet width [mm]: 600 - Magnet depth [mm]: 350 - Max. grinding wheel diameter [mm]: 350 - Control: Conventional - Motor power: 4.5kW - Transport dimensions: 2600mm x 1800mm x 2000mm (l x w x h) - Transport weight [kg]: 3500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Hodpoxpgwrofx Afnenh Lukas van Rossum

Condition: used, total height: 2,650 mm, total length: 4,700 mm, total width: 2,100 mm, Empty weight: 5.500 kg Price: On request - Documentation available: No - CE certificate present: No - Drive system: Conventional - X-axis travel [mm]: 1500 - Y-axis travel [mm]: 800 - Z-axis travel [mm]: 700 - Table width [mm]: 1200 - Table depth [mm]: 400 - Magnet width [mm]: 1200 - Magnet depth [mm]: 300 - Options: Digital readout - └ Type of digital readout: Heidenhain - Control: Conventional - Transport dimensions: 4700mm x 2100mm x 2650mm (l x w x h) - Transport weight [kg]: 5500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT Hnodpfsx Dkggox Afnjh VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total height: 2,150 mm, total length: 3,200 mm, total width: 1,900 mm, Empty weight: 3.500 kg - Documentation available: No - CE certificate present: No - Serial number: 179997 - Drive system: Conventional - Power [kW]: 4.0 - X-axis travel [mm]: 1000 - Y-axis travel [mm]: 350 - Z-axis travel [mm]: 500 - Table width [mm]: 1100 - Table depth [mm]: 350 - Magnet width [mm]: 1000 - Magnet depth [mm]: 300 - Max. grinding wheel diameter [mm]: 300 - Control: Conventional - Motor power: 4.0kW - Transport dimensions: 3200mm x 1900mm x 2150mm (l x w x h) - Transport weight [kg]: 3500kg - Transport packages [pcs.]: 1 Hnodpfx Asx A Tudefnjh Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total height: 2,100 mm, total length: 1,850 mm, total width: 1,550 mm, Empty weight: 2.300 kg - Documentation available: Yes - CE certificate present: No - Serial number: 116710373 - Power [kW]: 2.5 - X-axis travel [mm]: 450 - Y-axis travel [mm]: 250 - Z-axis travel [mm]: 280 - Table width [mm]: 750 - Table depth [mm]: 250 - Magnet width [mm]: 450 - Magnet depth [mm]: 250 - Max. grinding wheel diameter [mm]: 240 - Max. spindle speed [rpm]: 2900 - Motor power: 2.5kW - Transport dimensions: 1850mm x 1550mm x 2100mm (l x w x h) Hodpfxjwya Nrs Afnenh - Transport weight [kg]: 2300kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 2008, Type: PG161 Serial number: 08357-1 Year of construction: 2008 Hjdpoxwx N Njfx Afnsnh Hole plate diameter: 160 mm Mixer: 1300 litres, max 700 kg Compressed air: 6 - 10 Bar Power: 3 x 400V, 50Hz, 45kW Dimensions: 2400 x 3000 x 3150 mm Weight: 2250 kg With inspection platform and lifter for 200L tote bins

Condition: excellent (used), Year of construction: 1997, Type: MWE32 Hnsdpfx Afsxuf Rusnoh Serial number: 125537 Year of construction: 1997 Hole plate diameter: Enterprise 32, 100 mm Hopper: 120 litres Infeed height: 1500 mm Outfeed height: 750 mm Power: 3 x 400V, 50Hz, 6.6kW Dimensions: 1200 x 800 x 1800 mm Weight: 500 kg

Condition: excellent (used), Year of construction: 2006, Type: AV250 Serial number: 06089-1 Year of construction: 2006 Hole plate diameter: 250 mm Hopper: 800 litres Power: 3 x 400V, 50Hz, 78kW Hodpoyazi Ssfx Afnonh Dimensions: 1650 x 1700 x 2400 mm Weight: 1750 kg 3 speeds on feed screw, 2 speeds on working worm

Condition: excellent (used), Year of construction: 2006, Type: AV250 Serial number: 06090-1 Year of construction: 2006 Hole plate diameter: 250 mm Hopper: 800 litres Hedpfxjttzdqs Afnsnh Power: 3 x 400V, 50Hz, 78kW Dimensions: 1650 x 1700 x 2400 mm Weight: 1750 kg 3 speeds on feed screw, 2 speeds on working worm

Condition: ready for operation (used), Elb SWE 6 VA II Worklenth without magnetic table: 600 mm Grindingwidth: 400 mm Longitudinal travel X-axis (autom.): 600 mm Cross-travel Y-axis (autom.): 400 mm Travel Z-axis (autom.): 450 mm Dimensions of the table: 1100 x 450 mm Dimensions magnetic table: 700 x 200 mm Max dia grindingstone: 300x50x76 mm Hnedpfox Dd Idjx Afnjh Spindlespeeds: 1400 x 1800 rpm Motorpower: 5.5 kW, total 13 kW Tension needed: 400V

Condition: used, twin shaft paddle mixer mixer capacity 1.250 L. 200 mm – head with tool trolley all stainless steel dimensions mixer (l x w x h) : ± 2.350 x 2.000 x 2.600 mm Hnodpfxoygtu Hj Afnjh loading height : 2.200mm pneumatic lid

Condition: used, total height: 2,700 mm, total width: 2,000 mm, total length: 4,500 mm, Empty weight: 12.000 kg - Documentation available: No - CE certificate present: No - Drive system: Conventional - Table width [mm]: 1000 - Magnet width [mm]: 1000 - Options: Digital readout - └ Type of digital readout: Newall 2-A Hjdpfx Asw A Nglefnonh - Control: Conventional - Transport dimensions: 4500mm x 2000mm x 2700mm (l x w x h) - Transport weight [kg]: 12000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Condition: used, total height: 1,780 mm, total length: 2,720 mm, total width: 1,910 mm, Empty weight: 2.500 kg Price: On request - Documentation available: No - CE certificate present: No - X-axis travel [mm]: 750 - Z-axis travel [mm]: 340 - Table width [mm]: 600 - Table depth [mm]: 300 - Max. grinding wheel diameter [mm]: 355 - Max. spindle speed [rpm]: 1500 - Options: Digital readout - Transport dimensions: 2725mm x 1910mm x 1780mm (l x w x h) - Transport weight [kg]: 2500kg Hsdpfewniacex Afnenh Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren