Used Wet Wipes for sale (881)

Condition: excellent (used), Catalog number 7294 TECHNICAL DATA - Max. width of workpiece: 230mm - Min. width of workpiece: 15mm - Max. height of workpiece: 160mm - Min. height of workpiece: 10mm 7 spindles: 1) Horizontal, lower: 230mm, 7.5kW 2) Vertical, right: 160mm, 5.5kW 3) Vertical, left: 160mm, 5.5kW 4) Vertical, right: 160mm, 5.5kW 5) Horizontal, upper: 230mm, 7.5kW 6) Horizontal, upper: 230mm, 7.5kW 7) Horizontal, lower: 230mm, 5.5kW - All spindles adjustable up/down, left/right - Spindle diameter: 40mm - Spindles 3, 5, and 6 are electrically adjustable from the control panel to the desired dimension (ATS) - Motor: 2 x 0.37kW - Spindle diameter: 40mm - All spindles equipped with a brake From above: - 8 feed rollers, toothed, metal, including 2 double rollers - 3 discharge rollers, toothed, rubber, double rollers From below: - Feed roller, toothed, pulling, pivoting - 3 discharge rollers, pulling, metal, smooth - Rollers pneumatically pressed - Length of feed table: 2480mm - Central lubrication of the table Njdpez Nlc Ejfx Abyodc - Electric adjustment of planing thickness - Body lifting motor: 0.56kW - Smooth feed rate adjustment on a frequency inverter: 6-24m/min - Feed motor: 3.7kW - Feed on Cardan shafts - Diameter of dust extraction port: 7x125mm - Dimensions (L/W/H): 5520x1930x1900mm - Weight: approximately 4000kg ADVANTAGES – With 7 heads – Ideal for both wet and dry wood – With ATS – Original DTR documentation + CE – Unpainted – Used planer, in perfect condition Original photos Net price: 156900 PLN Net price: 36500 EUR, depending on the exchange rate of 4.3 EUR (Prices may change due to higher fluctuations)

Condition: excellent (used), Catalog number: 8059 TECHNICAL DATA - max width of the workpiece 200mm - max height of the workpiece 140mm - number of spindles 4 1) horizontal lower 200mm, 5.5kW 2) vertical right 140mm, 4kW 3) vertical left 140mm, 4kW 4) horizontal upper 200mm, 5.5kW - all heads adjustable up/down, left/right - spindle diameter 40mm - spindle speed 6000 rpm – top: - 6 infeed rollers, toothed, including 2 double rollers - outfeed roller, toothed, double, rubber – bottom: - side pressure roller - infeed roller, toothed, helical, in the lower table - side pressure roller Nedpozx Sn Ujfx Abyedc - outfeed roller, smooth, metal - all rollers pneumatically pressed - length of the infeed table 1600mm - table adjustable up/down - central lubrication - electric setting of the planing thickness - lifting motor 1.1kW - stepless feed rate adjustment - feed motor 3kW - feed on Cardan shafts - enclosed in a cabinet - diameter of the dust extraction nozzle 4x140mm - dimensions L/W/H 3200x1700x1750mm - weight 3000kg ADVANTAGES – for 4 heads – ideal for both wet and dry wood – used machine, very good condition Net price: 51900 PLN Net price: 12070 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to higher fluctuations)

Condition: good (used), functionality: fully functional, mileage: 13,187 km, power: 140 kW (190.35 HP), gearing type: automatic, fuel type: diesel, Year of construction: 2007, operating hours: 13,187 h, Wheel loader Liebherr L556-454, 2plus2 configuration, year of manufacture 2007. Equipped with Liebherr engine D934L A6 delivering 140 kW, automatic transmission, and self-locking differentials on both axles. The stepless 2plus2 drive system and wet multi-disc brakes on both axles ensure high traction and operational safety. The machine features single-lever control, air conditioning, adjustable steering column, and a driver's suspension seat with LFD damping system for enhanced operator comfort. The cab is fitted with a laminated safety glass windscreen, green/tinted version. Additionally, there are 4 working lights at the front and 2 reversing lights. Attachments and special equipment: - 2600 mm lift mast - Piston rod protection for 2600 mm lift mast Njdpfxsy Dt A Te Abyodc - 4 Michelin tyres 23.5 R25 XHA*L3 - Quick coupler - Single rail guide for Z-kinematics / 2600 mm lift mast - Single front hydraulic auxiliary circuit and additional hydraulic swing function - Automatic central lubrication system with electric pump and electronic control - Reversible fan drive - Electronic auxiliary module with keypad - Top-Air pre-cleaner - Control lever lift lock for add-on lever set - Operator seat with pneumatic suspension Grammer 24V - Radio installation kit 24V - Rear view monitoring with camera and monitor - German/Luxembourg version - Operating manual GT list A powerful and comprehensively equipped wheel loader, suitable for demanding tasks in construction, recycling, industrial applications, and material handling. Sale is made without warranty and liability.

Condition: used, mileage: 69,890 km, power: 120 kW (163.15 HP), first registration: 06/2021, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 4, total length: 5,932 mm, total width: 2,020 mm, total height: 2,496 mm, loading space volume: 10 m³, loading space length: 3,496 mm, loading space width: 1,773 mm, loading space height: 1,608 mm, Year of construction: 2021, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, - Internal No. 70.66 - Passenger/cargo space dimensions: Length to driver’s seat 3,479 mm x length to partition wall 2,186 mm x width 1,778 mm x height 1,608 mm - Windows can be installed in the cargo area or rear doors upon request for €300 each - Switchable all-wheel drive - 7G-TRONIC PLUS automatic transmission - Electronic climate control Tempmatic - Package: Parking package with reversing camera - Navigation with voice control - MBUX multimedia system with 7-inch touchscreen, featuring Apple CarPlay and Android Auto - Cruise control - Auxiliary heater - Thermal insulation driver’s cabin - Thermal insulation cargo area - Electric warm air additional heater - WET WIPER SYSTEM - Heated passenger seat - Heated driver’s seat - Comfort passenger seat - Comfort driver’s seat - Seat: Electric lumbar support for passenger seat - Seat: Electric lumbar support for driver’s seat Ndsdpfoy Rv Hzex Abyec - Cargo area cladding up to belt rail - Rear double doors, can be opened towards the side wall - Tires: M+S (Mud and Snow) - Rain sensor - Radio: Digital DAB radio - Package: Acoustic package - Navigation: Live traffic enabled - Multifunction steering wheel - Anti-theft alarm and intrusion warning system - Tinted privacy glass, rear compartment (black glass) - Roof rail tracks - Step for rear doors - Battery: 12V/92Ah AGM battery - Front-side indicator lamps - Digital operating manual - Main tank 93 liters - Passenger airbag - Exterior mirrors without integrated indicators - Window front left in sliding cargo door - Window front right in sliding cargo door - All-weather floor mats - Alternator 14V / 180A - Wooden floor in cargo area - Terminal strip for electrical connections - Comfort roof control unit - Side marker lights - Wheel arch cladding - Tires: Continental brand - Rear mud flaps - Front mud flaps - Armrest, driver and passenger doors - Pre-installation electrical system for special parameter module - No parking light - Heat-insulating windshield with band filter - KEYLESS-Start - Seats: Adjustable passenger seat - Central locking with remote control - Seats: Driver’s seat armrest - Retrofitting trailer hitch possible - Chassis number: W1V9076331P344089 1st owner, not an import (German vehicle), not a rental car, excellent condition, non-smoker vehicle, original Mercedes service book maintained, trade-in of old vehicle possible, workshop-inspected including warranty, DEKRA used vehicle condition report available upon request. We are happy to deliver the vehicle purchased on site to your home at a rate of €0.50/km. Minimum delivery fee is €150.00.

Condition: used, mileage: 199,111 km, power: 105 kW (142.76 HP), first registration: 08/2020, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 2, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Vehicle number (for enquiries): 91 Mercedes-Benz Sprinter 314 CDI Single owner. Full service history. Paint code: * 9147 Paint color Arctic White MB 9147 Interior trim: * VF7 Maturin fabric, black Equipment: * 219L Hamburg * 9147 Paint color Arctic White MB 9147 * BH1 Hill hold function * BH4 Control code hydro aggregate variant 3 * BK2 Control code wheel brake configuration 2 * C6L Multifunction steering wheel * C910 - * CB7 Stabilization level I * CL1 Steering wheel adjustable in tilt and height * D22 Fixed window in rear roof * D50 Full partition wall * E07 Hill start assist * E1D Digital radio (DAB) * E2I Additional battery for retrofit consumers, interior area * E36 Additional relay for extra battery * E3M MBUX multimedia system with 7-inch touchscreen * ED4 AGM battery 12V 92Ah * ES0 Jump-start contact * ES5 Charging package for instrument panel * EW6 Pre-installation for Remote Services Plus * EY5 Mercedes-Benz emergency call system * EY6 Breakdown management * F1K Coat hook in cab * F64 Exterior mirrors electrically folding * F68 Exterior mirrors heated and electrically adjustable * F910 - * FF5 Overhead storage shelf above windscreen * FG8 Front cupholders * FJ1 Folding lid for storage compartment * FJ4 Storage compartment under dashboard * FKA Panel van * FM3 Wet wiper system * FR8 Reversing camera * FY1 Anti-theft package * FY7 Multi-button remote control * Additional main key * GK8 9G-TRONIC * H12 Additional hot-water heater * H13 Additional rear heat exchanger * H16 Driver’s seat heating * H21 Thermal insulation glazing all round with filter strip on windscreen * HH9 Semi-automatic TEMPMATIC air conditioning * HI1 Climate zone 1 (cold/comfort) * IC1 Model series C907/C910 Sprinter * IF0 Model series C910 VS30 FWD * IG4 Standard * IG5 Basic * IH6 Head unit ECE/ROW * IK0 Complete vehicle * IL1 Domestic (Germany) * IL5 Left-hand drive * IS2 Wheelbase 3,259 mm (code forming BM) * IT4 3.5 tonner * J10 Speedometer km/h * J58 Seat belt warning for driver’s seat * J65 Outside temperature display * JA7 Blind spot assist * JA8 Crosswind assist * JF1 Rain sensor * JH3 Communication module (LTE) for digital services * JI6 Start running distance service interval 40,000 km * K12 Main tank 65 liters * K1D Exhaust generation WLTP * KP6 SCR emission control generation 3 * L Left-hand drive * L22 Rear lights with partial LED technology * L65 Ceiling light in load/passenger compartment with door contact * L94 Omission of parking light * LA2 Light assistant * LB5 3rd brake light * LC4 Comfort roof control unit * LE1 Adaptive brake light * LG7 LED high performance headlights * LX5 Europe * MI2 Engine OM651 DE 22 LA 105 kW (143 hp) * MJ8 ECO start-stop function * ML7 Efficient Power Control (EPC) * MS1 Cruise control * MT2 Emissions standard Euro 6D-TEMP N1 * OH3 Inspection fresh-up 3 * P2R Basic package * P47 Front mud flaps * Q11 Longitudinal frame reinforcement * R65 Spare wheel carrier under rear frame * R87 Spare wheel * RF1 Tire brand Continental (10) * RM0 All-season tires Nsdpfx Asx Dp Trjbyjdc * RN5 Tire size 225/65 R16 C * RS3 Steel wheels 6.5 J x 16 * RX5 Wheel brand Maxion Wheels * S04 Adjustable passenger seat * S22 Armrest for driver’s seat, ISO-fix (child seat mounting system) * S25 Armrest for passenger seat, center armrest

Condition: new, Year of construction: 2026, Hello, I have a new 800mm diameter vibrating screen for sale. The screen has two levels for classifying material. Mesh size is negotiable. Changing the screen size using screws is quick and easy. The motor mounted in the screen has a 0.7kW output and 1460rpm, and it vibrates and oscillates around the circumference. The screen is made of SUS304 stainless steel. The entire screen structure and welds are solidly constructed. The last photo shows the operation of the vibrating motor, showing how the material spreads across the screen. Ndjdpfozw Eqaox Abyjc The screen can screen both dry and wet material. It is possible to add a third filter layer. I provide access to all consumables after purchasing the screen, such as seals and clamps. I also have empty frames on which additional screens can be stretched.

Condition: used, Year of construction: 1995, Rebuilt in 2020 Printing Specifications: 5 wet-offset printing towers Variable print repeat: 14”–26” Printing width: 475 mm Web width: 485 mm Mechanical speed: 250 m/min 360° register control Manual ink duct 24” printing inserts Plate thickness: 0.30 mm Sticky-back blanket thickness: 0.95 mm 3-cylinder printing configuration Unwinding & Rewinding: • Unwinder for reels up to Ø1270 mm • Unwind shaft • Rewinder for reels up to Ø1270 mm • Rewind shaft Ø70 mm Web Handling: • BST web edge control Nsdpfxjzzaz Uj Abyodc • BST WebVideo inspection system • 2 turner bars with air blower (after printing units 1 and 2) Drying & Dampening: • GEW UV drying system, 5 lamps (2020) • Power cabinets for UV system • Technotrans dampening cooling system with alcohol dampening Die Cutting & Finishing: • Servo-driven die-cutting unit • Waste rewinder • Punching and perforation station including: o Common paper infeed with pull wheels o Length perforation o Space for two file-hole groups o IMR block with duplex sprocket punching (245–485 mm) o Pile marking device o Length slitting o 24” file-hole punch unit o Common anvil cylinder for two cross-perforation cylinders up to 28” o Variable zig-zag folder (5”–16”) o 2 × 24” cross-perforation cylinders Control & Equipment: • Main drive motor frame • Press control panel • Main electrical cabinet • Plate bender

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: NR810NEU, total length: 1,415 mm, sweeping width: 810 mm, empty load weight: 465 kg, fuel type: electric, construction height: 1,120 mm, drive type: Elektro, construction width: 890 mm, Scrubber Dryer Chassis Number: NR810NEU Condition: New unit Technical Condition: New Front Tyres Condition: New Rear Tyres Condition: New Battery Voltage: 24V Battery Capacity: 200Ah Battery Type: Waterless Battery Year of Manufacture: 2025 Battery Condition: New Description: - Delivers efficient cleaning performance of up to 4,860 m² per hour. - Compact design with a low center of gravity, tight turning radius, and flexible operation. - Integrated waterproof touch panel with LCD display for showing operating parameters and error codes; facilitates parameter adjustment and fault diagnosis. - Three speed settings and adjustable water flow. Nsdpfezydvasx Abyjdc - Proprietary controller featuring protection against motor overload and low battery, effectively extending the life of both motor and battery. - ECO mode to reduce suction motor power and noise level, ideal for noise-sensitive environments. - Electric one-touch lift function for brush and squeegee holders; squeegee holder is automatically lifted when reversing for safe and efficient operation. - Dual brush/pad design with innovative quick-connect system for brushes or pads, making them easy to load and unload. - 120-liter fresh and dirty water tank capacity reduces the frequency of filling and emptying. Automatic alarm when clean water tank is empty or dirty water tank is full. - Large opening reversible dirty water tank with tool-free disassembly for easy cleaning and maintenance. - Seat equipped with safety switch, causing the machine to stop automatically when the operator leaves the seat. - Non-slip, durable tyres for reliable traction and optimal grip, even on smooth or wet floors.

Condition: used, mileage: 153,000 km, power: 140 kW (190.35 HP), first registration: 07/2021, fuel type: diesel, overall weight: 3,500 kg, fuel: diesel, energy efficiency: G, CO₂ emissions: 235 g/km, fuel consumption (urban): 9.7 l/100km, fuel consumption (extra-urban): 8.5 l/100km, fuel consumption (combined): 8.9 l/100km, color: white, gearing type: automatic, suspension: steel, number of seats: 3, total width: 2,345 mm, total height: 2,616 mm, Equipment: air conditioning, airbag, cruise control, onboard computer, parking sensors, power assisted steering, sliding door, soot filter, E07 Hill-start assist, BA3 Active brake assist, BH8 Control code for hydraulic unit variant 7, BK2 Control code for wheel brake configuration 2, C6L Multifunction steering wheel, CB7 Stabilization level I, CL1 Steering wheel adjustable in tilt and height, CN2 Radiator grille frame in vehicle color, D03 High roof, D13 Mounting rails for roof rack, D50 Partition wall, continuous, E1D Digital radio (DAB), E1G Live Traffic capability, E2N Control for PRO features in NTG6, E43 Trailer socket 13-pin, E4M MBUX multimedia system with 10.25-inch touchscreen, ED4 Fleece battery 12 V 92 Ah, ES0 Jump start - contact, ES5 Charging package, instrument panel, EX9 Digital extra: 3 years of free map updates, EY5 Mercedes-Benz emergency call system, EY6 Breakdown management, F68 Exterior mirrors, heated and electrically adjustable, FF5 Storage compartment above windshield, FJ4 Storage compartment under cockpit, FM3 WET WIPER SYSTEM, H1B Tachograph operation at the front, under the headliner, H21 Heated glass with band filter on the windshield, HH9 Semi-automatic controlled TEMPMATIC air conditioning system, HI1 Climate zone 1 (cold/comfort), IG4 Standard, IG5 Basic, IH6 Head unit ECE/RoW, IR6 Wheelbase 4325 mm, short overhang, IT4 3.5-tonner, J10 Speedometer km/h, J55 Seat belt warning system for passenger seat, J58 Seat belt warning system for driver seat, J65 Outside temperature display, JB4 Active lane keeping assist, JB7 Parking package with reversing camera, JD6 Intelligent tachograph EU, JF1 Rain sensor, JH3 Communication module (LTE) for digital services, JI7 Start mileage, maintenance interval 60,000 km, JK5 Instrument cluster with color display, K13 Main tank 71 liters, KP6 Exhaust gas purification SCR generation 3, L65 Ceiling light(s) LD-/FG-compartment with door contact, LA2 Driving light assistant, LB1 Side marker lights. We are available by phone Monday to Friday until 8:00 PM and Saturday until 4:00 PM! More:!! Leasing/financing and trade-in possible! Nodpfxezyadgj Abyodc !! !! - Errors and prior sale are subject to change! - All information without guarantee... more on our website.

Condition: used, mileage: 25,000 km, power: 120 kW (163.15 HP), first registration: 07/2025, fuel type: diesel, color: grey, gearing type: automatic, number of seats: 8, total length: 4,895 mm, total width: 2,244 mm, total height: 1,910 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, * 2-way speakers front and rear * Comfort 3-seater bench, 1st row, outer seat foldable * Comfort 3-seater bench, 2nd row, outer seat foldable * 9G-TRONIC automatic transmission * Adaptive brake light * Aerodynamics package * Passenger airbag * Active Brake Assist * Active door retainer for sliding door * Active Lane Keeping Assist * Acoustic package * Trailer load capacity 2500 kg * Detachable ball-type trailer coupling * Armrests for passenger area seating * Exit lights * Electrically folding exterior mirrors * Heated and electrically adjustable exterior mirrors * Lighting in rear grab handle with reading spotlight * Illuminated vanity mirrors * Front footwell lighting * BlueEFFICIENCY package * Brake force booster failure compensation * CO2-optimized braking system * Chrome interior package * Privacy glazing in rear, tinted glass * DIGITAL RADIO (DAB) * Roof cladding * Double cup holder in center cockpit * ECO start/stop function * EMISSION CLASS EURO 6E UP TO M1 Ndedsy Nvg Eepfx Abysc * Automatic headlamp control * Misfuelling protection * Fixed rear window * Tailgate window with wiper and washer system * Front right window, fixed in side wall/sliding door * Front left window, fixed in side wall/sliding door * Electric parking brake * Speed limiter 210 km/h * Weight variant 3,100 kg * Belt warning for front passenger seat * HOLD function * Entry grab rails for driver and front passenger * Main tank 70 liters * Interior and ambient lighting for combi * Automatically dimming interior mirror * Premium interior trim * COMBI VEHICLE * Passive child detection in vehicle * Child safety locks for rear passenger doors * Semi-automatic climate control, TEMPMATIC in rear * Automatic climate control THERMOTRONIC * Instrument cluster with color display * Comfort front passenger seat * Comfort roof control unit * Comfort driver seat * Comfort suspension * Comfort closing * Communication module (LTE) for digital services * PAINT COLOR GRAPHITE GREY METALLIC DARK MB 7831 * Leather steering wheel * Live Traffic Information * Lumbar support driver and passenger seat * MBUX multimedia system * MULTIBEAM LED with High Beam Assist PLUS * Mercedes-Benz MobiloVan with DSB and GgD * Mercedes-Benz emergency call system * Metallic paint * Center console with storage compartment * Multi-button remote control * Multifunction steering wheel * Rear compartment night lighting * Navigation system * OM 654 DE 20 LA 120 kW (163 hp) 3800 rpm * Breakdown management * Parking package with reversing camera * Wheelbase 3200 mm, long rear overhang * Wireless tire pressure monitoring front and rear axle * Sliding door left * Tail/brake/blinker lights in LED technology * Face-to-face seat mounting 1st rear seat row, rails * Driver seat occupancy detection * Heated passenger seat * Heated driver seat * Seat cushion depth adjustment passenger seat * Seat cushion depth adjustment driver seat * Quick-release seat rail system * Smartphone integration package * Vito Mirror Package * 12V socket in boot/cargo area * 12V sockets for rear passenger rows right & left * Fabric Caluma black * CRUISE CONTROL * Thorax-pelvis sidebag passenger * Thorax-pelvis sidebag driver * Blind Spot Assist * Tourer SELECT * Ambient lighting for tailgate * Traffic Sign Assist * Front axle with increased load capacity * Preparation for Remote Services Plus * Warm air duct to passenger compartment * Heated Wet Wiper blades * Window airbags for driver and front passenger * All-round heat-insulating glass * Electric auxiliary heat

Condition: used, mileage: 78,009 km, power: 120 kW (163.15 HP), first registration: 11/2021, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 5, total length: 5,932 mm, total width: 2,020 mm, total height: 2,785 mm, loading space volume: 13 m³, loading space length: 3,509 mm, loading space width: 1,774 mm, loading space height: 1,978 mm, Year of construction: 2021, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, - Internal No. 98.65 - Dimensions of passenger/cargo compartment: Length to driver's seat 3,507 mm x length to partition 2,214 mm x width 1,772 mm x height 1,977 mm - Sortimo workshop vehicle shelving left and right, extra charge €1,000 - Switchable all-wheel drive - 7G-TRONIC PLUS automatic transmission - TEMPMATIC automatic climate control - MBUX multimedia system with 10.25" Apple CarPlay and Android Auto - Acoustic package - Park package with reversing camera including front and rear parking sensors - Digital radio DAB - Rain sensor - M+S tyres - 3-seater bench in the first row - Comfort passenger seat - Comfort driver seat Ndedpoy N Hf Sjfx Abyec - Electrically adjustable lumbar support, passenger seat - Electrically adjustable lumbar support, driver seat - Heated passenger seat - Heated driver seat - Cruise control - Full partition at C-pillar - WET WIPER SYSTEM - Electric auxiliary air heater - Programmable auxiliary heater (hot water) - Warm air duct to passenger compartment - Heat-insulating glass with band filter on windscreen - Thermal insulation, driver’s cab - Thermal insulation, cargo compartment - Tinted sliding window in passenger compartment - Tinted front right window in sliding load area door - Passenger side airbag - Step at rear door - Exterior mirrors without indicators - Main battery switch - AGM battery 12V / 92 Ah - Auxiliary battery for retrofit equipment - Tachograph controls front, under roof liner - Side indicator lights, front - Roof lining - Ceiling light in loading/passenger compartment - Red diesel filler cap - All-weather floor mats - Alternator 14V/180A - Wooden floor - Washable roof height - Hinged lid for storage compartment - Terminal strip for electrical connections - Combination instrument with color display - Comfort roof control unit - Lashing rails, sidewall (in partition wall area) - Lashing rails, sidewall (in partition) - Cable duct at rear portal - Cable duct at sidewall - Multifunction steering wheel - Side marker lights - Fog lights with cornering function - Load package, dashboard - Retrofitting of tow bar possible - Chassis number: W1V9076331P400340 First owner, not a re-import (German vehicle), not a rental, excellent condition, non-smoker vehicle, original Mercedes Benz service history, trade-in of used vehicle possible, workshop inspected incl. warranty, DEKRA used vehicle inspection report available on request. We can deliver the vehicle purchased on site to your home for €0.50 / km. Minimum charge €150.00.

Condition: used, mileage: 78,009 km, power: 120 kW (163.15 HP), first registration: 11/2021, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 5, total length: 5,932 mm, total width: 2,020 mm, total height: 2,785 mm, loading space volume: 13 m³, loading space length: 3,509 mm, loading space width: 1,774 mm, loading space height: 1,978 mm, Year of construction: 2021, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, - Internal No. 98.65 - Passenger/Cargo compartment dimensions: Length to driver’s seat 3,507 mm x Length to partition wall 2,214 mm x Width 1,772 mm x Height 1,977 mm - Sortimo workshop van racking left and right, surcharge €1,000 - Selectable all-wheel drive - 7G-TRONIC PLUS automatic transmission - TEMPMATIC automatic climate control Ndsdpfjy N Hgcsx Abyec - MBUX multimedia system with 10.25'' screen, Apple CarPlay and Android Auto - Acoustic package - Park Package with reversing camera incl. front and rear parking sensors - Digital radio (DAB) - Rain sensor - M+S tires - Seats: 3-passenger bench, 1st row - Comfort passenger seat - Comfort driver’s seat - Lumbar support, passenger seat electric - Lumbar support, driver’s seat electric - Heated seat, passenger - Heated seat, driver - Cruise control - Continuous partition at C-pillar - WET WIPER SYSTEM - Electric auxiliary hot-air heater - Programmable auxiliary heater (hot water) - Hot-air duct to passenger compartment - Heat-insulating glass with band filter on front windshield - Thermal insulation, driver’s cab - Thermal insulation, cargo area - Tinted sliding window in passenger compartment - Tinted front right window in side sliding door - Passenger airbag - Step at rear door - Exterior mirrors without indicators - Battery main switch - Battery: AGM, 12 V / 92 Ah - Battery: Auxiliary battery prepped for retrofit - Tachograph control front under roof liner - Side indicators, front - Roof lining - Interior lighting in cargo/passenger area - Red diesel filler cap - All-weather floor mats - Alternator 14 V/180 A - Wooden floor - Washable roof height - Flip lid for storage compartment - Terminal strip for electrical connections - Instrument cluster with color display - Comfort roof control unit - Lashing rails on side wall in partition area - Lashing rails on side wall in partition area - Cable duct at rear portal - Cable duct at side wall - Multifunction steering wheel - Side marker lights - Fog lights with cornering function - Load compartment package, dashboard - Tow bar retrofitting possible - Chassis number: W1V9076331P400340 1st owner, no reimport (German vehicle), not a rental car, excellent condition, non-smoker vehicle, original Mercedes-Benz service book maintained, trade-in of used vehicles possible, workshop-inspected including warranty, DEKRA used vehicle condition report available on request. We are happy to deliver the vehicle purchased on site to your home address for a price of €0.50 per km. Minimum delivery cost is €150.00.

Condition: good (used), functionality: fully functional, Year of construction: 2018, Duplex Inox KUGELMANN MOUNTED SPREADER DUPLEX 1.8 m³ STAINLESS STEEL made of V2A stainless steel Container volume 1.8 m³ - 2 screw conveyors - Spreader with spreading disc, 8 m spreading width (rustproof) - K-Tronic 2 control system with flying cable harness - Wet salt systems (technical data see below *) - For moistening in the impeller of the spreading disc - Automatic dry material reduction - 2 side salt tanks and 1 center tank - Tank capacity approx. 820 liters Ndodpfszf E Dvjx Abyec - Stainless steel spreading disc, 8 m spreading width - Screw couplings - Cable separation - Folding roof - All-round beacon, halogen - PVC skirt - Work light - Volumetric meter or weight meter of the control system as - Spreading control - Sign "Winter service" - Drive via vehicle hydraulics * Wet salt system mounted on the spreader Wet salt system suitable for the above-mentioned spreader, driven by a hydraulically operated gear pump in a separate closed control circuit (with feedback) for maximum dosing accuracy, even with low application rates, stepless and percentage- accurate dosing, capacity, as described above, 820 liters Standard equipment: - Salt tanks on both outer sides, as well as under the container between the spreader compartments - Level indicator or conveying control - Connection for filling - Hydraulically operated gear pump for dosing - Filter unit - Brine distributor - Control system k-tronic 2 - Paint finish RAL 2011 - municipal orange - Access ladder - Electrical spreading control - Electrical spreading pattern adjustment - Mounting kit according to agreement and vehicle Advantages of KUGELMANN mounted spreaders: - Kugelmann screws always have 3 pitches (patented) - The screws can be run in reverse with the push of a button, so that solid objects can be quickly and easily loosened (patented) - Daily application counter standard - Extremely low construction and extremely low center of gravity, resulting in significantly better vehicle handling and loading of spreading material as well as visibility to the rear - Control systems are always interchangeable (data is stored on the slave) - High level of in-house production - High-pressure resistant hydraulic motors, even with full pressure in the return line, no seals are damaged! (Can occur due to incorrect connection of the hydraulic lines.) Subject to change, printing errors, and prior sale. All information is provided without guarantee. The sale takes place with the exclusion of any warranty.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, DIOSNA V50 Pharma Universal Mixer / Granulator Year of manufacture 2007 | Double-jacketed for heating/cooling | ATEX | Siemens PLC Manufacturer: DIOSNA Dierks & Söhne GmbH Type: V50 Machine No.: 383-001 Year of manufacture: 2007 High-quality DIOSNA V50 Universal Mixer / Granulator in exceptionally good used condition. The product-contacting interior as well as the mixing and chopping tools are in very good condition and appear almost new. SPECIAL FEATURE – DOUBLE JACKET: The mixing container has a double-walled design and enables the heating or cooling of the mixing material. This allows the product to be temperature-controlled during the mixing or granulation process. Technical data: - Container volume: 52 l - Usable volume: 46 l - Machine weight: approx. 200 kg - Compressed air supply: 7–10 bar - Voltage supply: 3/PE 400 V / 50 Hz - Fuse rating: 25 A slow-blow Mixing tool: - One-piece 3-blade mixing tool - Runs close to the bottom - Frequency-controlled three-phase geared motor - Power: 4.0 kW - Max. synchronous speed: 495 rpm - Protection class drive: Ex II 2G / IP65 Chopper: - Located on the side in the container housing Ndsdpfx Abszxq U Heyjc - One-piece 2-blade tool - Two-stage drive - 1,500 / 3,000 rpm - Power: 1.1 / 1.9 kW - Protection class drive: Ex II 2G/3D / IP66 Equipment: - Double-walled mixing container for heating/cooling - Fully hinged, dust-tight lid - Inspection flap with wiping device - Filter - 1.5" Tri-Clamp connection - Side product outlet with manually operated shut-off piston - Safety monitoring of lid and outlet - Air gap seals for mixer and chopper - Mobile stainless steel frame Control: - Siemens SIMATIC S7-200 PLC - Siemens TP177B touch panel - Manual and automatic operation - Recipe management - Multi-phase process control - Display of mixer speed, power, product temperature and chopper speed - Trend and alarm message display Particularly suitable for intensive mixing and homogenizing of powders, as well as for granulation and agglomeration processes. Original DIOSNA operating manual and control documentation available. Inspection and functional test possible by appointment at CYCRON GmbH in 4226 Breitenbach, Switzerland. Subject to prior sale and errors.

Condition: ready for operation (used), functionality: fully functional, The complete BRETINOV line organizes three key stages in the spring roll production process. It includes a wrapper softening unit, a filling dispenser, and a folding and rolling table. This ensures that each part performs a specific operation before passing the product to the next station. This configuration is suitable for Asian caterers, food processing workshops, and ready-meal manufacturers. It allows for the use of rice paper wrappers and various filling recipes. Furthermore, it improves the consistency of the dispensing, folding, and final presentation. Rice Paper Wrapper Softening First, the softening unit prepares the wrappers before dispensing. It applies water and then steam to soften each sheet. As a result, the wrapper becomes easier to fold without breaking. BRETINOV positions the steam production close to the wrapper to minimize heat loss. In addition, the system precisely regulates the water supply. This step remains essential, as a wrapper that is too dry may tear. Conversely, a wrapper that is too wet becomes difficult to handle. Consistent Filling Dispensing Next, the BRETINOV P007 dispenser places the filling onto the softened wrapper. The attached plate clearly identifies this module as a P007 dispenser, version 2, manufactured in 2024. The dispensing head uses a screw to move the mixture towards the outlet. This makes it easier to control the amount dispensed. Furthermore, BRETINOV designs this system to preserve the texture of the ingredients and minimize their crushing. Interchangeable nozzles can also adjust the shape of the dispensed filling according to the recipe. Folding and Rolling of Spring Rolls Finally, the folding table receives the filled wrapper. It helps the operator or mechanical system to fold the sides and then roll the spring roll. This step improves the shape of the product and reduces variations between pieces. BRETINOV also uses air blowing systems on its automatic modules. These prevent the wet wrapper from sticking during folding. Consequently, the line facilitates the production of consistent spring rolls before cooking, freezing, or packaging. A Better-Organized Production Process The three parts work in a continuous sequence. First, the softening unit softens the wrapper. Next, the dispenser places the filling. Finally, the folding table shapes the product. This organization reduces movement and repetitive gestures. Furthermore, it helps teams to better control the recipe and presentation. BRETINOV develops its lines to reduce manual operations and improve operator comfort. Technical Specifications: Manufacturer: BRETINOV Line composition: P002 softening unit, P007 version 2 dispenser, and P003 folding/rolling table P002 Softening Unit: 380 V power supply, 8 kW power, 30 L/h water consumption, automatic belt cleaning, 250 kg weight P007 Dispenser: 220 V power supply, 0.8 kW power, pneumatic power supply, 60 kg capacity, 105 kg weight, serial number S594, year 2024, CE marking P003 Folding/Rolling Table: 220 V power supply, pneumatic power supply, 100 kg weight Nedpfx Ajzpw Etobyedc Dimensions (L, W, H) in mm: 6600 x 1000 x 1900 EKJZH9EL

Condition: new, Year of construction: 2025, Metal Detector for food and other (e.g. medical, chemical, textile) products, also suitable for wet products, stainless steel framework, touch screen, easy integration into existing production line. - Specifications: weight of the product: max. 5kg; detecting speed: 0.5m/sec; detecting accuracy: FE from Ø 1.5mm, SUS from Ø 2.0mm; tunnel size WxH: 125x250mm; max. passing size WxH: 100x215mm; power: 220V/0.3kW, 50Hz/60Hz; dimensions and weight: L1627xW528xH1420mm, 110/210kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Nsdpfx Aev Nm Hqobyodc

Year of construction: 2009, condition: used, Suitable for chamfering and surface grinding of hard metal rods. Accessories: Full cladding, Wet grinding device, Loading magazine for workpieces from 30 - 150 mm, Hydraulic feed of the grinding head, Hydraulic feed of the workpiece spindle head, Hydraulic workpiece clamping of the cylindrical grinding device, Preparation for connecting an extraction system, Automatic fire extinguishing device, Touch panel TP 177 A. workpiece diameter automatic mode: 3 - 20 mm workpiece diameter semi-automatically: 3-32mm workpiece length semi-automatic: 3-32mm workpiece length: 30-150 mm Drive power grinding spindle: 4.0 kW Spindle speed grinding spindle: 2000 rpm, speed of the cylindrical grinder: 1500 rpm. Ndodpsuxc Dhsfx Abyoc cutting wheel diameter: Max. 200 mm Electrical connection: approx. 7 kW (400 V / 50 Hz) Dimensions L x W x H: 2000 x 1500 x 1500 mm mass: approx. 1,600 kg colour: gray RAL 7035 Dimensions W x D x H =: 2000 x 1500 x 1500 mm

Condition: used, Year of construction: 2017, operating hours: 10,400 h, Equipment: Basic version DW 3060-F "Buffalo" Central axle trailer chassis with 3 axles, 80 km/h road approval Brake system incl. ABS and lighting according to EU directive Nedpfxjyu Srmo Abyjdc 50 mm EU towing eye incl. adaptor shoe Hydraulically adjustable support leg Splash protection (mudguards inside and on the sides) Permissible total weight 25,000 kg Tyres 385/65 R22.5 Mercedes-Benz/MTU diesel engine 6R1300, 320 kW at 2,000 rpm, complies with emission standard EUROMOT IV Auxiliary hydraulic connection 20 l/min Hydraulic preparation for drive Fuel tank 2 x 300 liters Roller length 3,000 mm, diameter 600 mm Trapezoidal teeth for roller (21 pcs) and tooth bar (22 pcs) - Size L (174 mm, armoured) Rear conveyor belt: length 5,500 mm, width 1,200 mm, hydraulically foldable, with anti-magnetic central section Longitudinal conveyor belt: length 3,300 mm, width 1,000 mm Centrally positioned wear strips 24 V electric control Roller reversing via electric motor when engine is off automatically reversible fan wheel Chassis with level control Acoustic start-up warning Doppstadt telematics system Paint finish: RAL2011 deep orange Additional equipment: Hydrostatic travel drive Radio remote control Attachment for comb extension Limiter Size “L” Comb extension Size "L" Limiter Wetting system Removable hopper extension plates on both sides Delivery date by arrangement

Condition: used, Year of construction: 2025, operating hours: 6 h, power: 82 kW (111.49 HP), Operating hours: 6, First registration: 06/30/2026. New tractor with dealer’s temporary registration before handover. Standard equipment / technical data. Engine: Rated power (ISO) 82 / 110 kW / hp at 2200 rpm, Max. power 86/115 kW/hp at 2000 rpm, Max. torque 460 Nm at 1600 rpm, Manufacturer / Type: Agco Power / AP 44MBTN-D5, Low-emission engine, 4 cylinders / 4.4 l, 4 valves, STAGE 5, Controlled turbocharger, SCR catalyst, DOC - diesel oxidation catalyst, SCR particulate catalyst, Hood - one-piece, foldable, Exhaust on the right side in front of the cab, Fuel tank capacity 198 liters / AdBlue 18 liters. Transmission / PTO: 16/16-speed Dyna-4, SpeedMatching, 40 km/h, PowerControl control on the left with load-shifting reversing gear, 4-stage load shifting, Continuously cooled wet clutches with independent lubrication system, Double PTO shaft: 540 / 540E / 1000, Switching electrically in the cab, PTO START / STOP button on the rear, left fender. Hydraulics / lifting system: Open system (OpenCenter) 58 l/min total flow rate, max. 200 bar, 2 control valves with hydraulic couplings: 1x single / double acting, mechanical remote control + 1x single / double acting, neutral, SST, Quick coupler Cat. 3 with balls and catch cups Cat. 3/2, Lower link control, 5,200 daN maximum lifting force, 2 external lifting cylinders, Adjustable lifting struts on both sides and 2 side stabilizers, EHR with external control on both fenders. Electrical equipment: Thermostart, 120 A alternator, Battery disconnect switch, electrical, Power supply (12 Volt) for external devices with connector. Axles / additional weights: Rear axle ND with flange hub, Oil-cooled disc brakes, Quick-adjusting automatic trailer hitch, Fender outer width rear 2.00 m, without extensions, Front weight carrier with integrated drawbar and drawbar pin. Cab: Vibration-damped standard cab with standard roof, ventilation and heating, air conditioning, Integrated safety frame with tinted glazing, Doors on both sides with safety steps, Steering column adjustable in height and inclination, Air-suspended driver’s seat with armrests, rotating adapter, seat belt, 2 large telescopic exterior & wide-angle mirrors, Interior mirror, Analog-digital instrument panel (SIS), Radio preparation with antenna and speakers, 4 work lights front and rear on the cab roof, 2 driving lights in the hood and on the handrails, 2 work lights on the rear fenders, Rear window wiper / washer system, All-wheel drive front axle with switchable differential lock. Special equipment: With fuel tank protection, PowerControl & Brake on Neutral (clutch effect), 100 l/min, Open Center hydraulic system, Oil flow coupling (58+42 l/min), Leakage oil collector on quick couplers, 3 control valves: 1x MR, double acting, EA, SST + 1x double acting, neutral, SST + 1x double acting, neutral, SST + free return, 2.5t front lift, 1 hydraulic line set, electrical socket, 480/70R38 ADJ Ø1.69m & 380/70R28 ADJ, Rear fender extensions - wide, Air conditioning, Cab with mechanical suspension, Telescopic exterior & wide-angle mirrors, Passenger / instructor seat with belt, Air-suspended driver’s seat, automatic adjustment with seat belt, rotating adapter and armrests, Rear window wiper / washer system, Battery. Nodpfx Aoyvmq Iebyodc

Condition: used, mileage: 3,000 km, power: 125 kW (169.95 HP), color: white, gearing type: mechanical, Year of construction: 2026, Equipment: ABS, air conditioning, - In order to provide you with the best possible advice, we kindly ask you to make an appointment. Mr. Kiel will gladly assist you. Tel: Ndedpfx Aboyy H Sgjysc A50 Front axle with increased load capacity, AR2 axle ratio i = 3.923, BA3 Active Brake Assist, C6L multifunction steering wheel, CB8 Stabilization Level II, CL1 steering wheel adjustable in tilt and height, CL2 leather steering wheel and leather gear shift lever, CW2 vehicle lowering omitted, D03 high roof, D93 partition omitted, E07 hill start assist, E1D digital radio (DAB), E1U USB socket 5 V, E3J switch panel pre-installation, E57 electrics for trailer socket, E7B navigation system pre-installation, E7M MBUX multimedia system, ED4 fleece battery 12 V 92 Ah, EE1 230 V socket, EK1 terminal strip for electrical connection, ES0 jump-start contact, ES5 instrument panel charging package, F61 interior rear-view mirror, F64 electrically folding exterior mirrors, F68 heated and electrically adjustable exterior mirrors, FF5 overhead storage above windscreen, FJ1 folding cover for storage compartment, FJ4 storage compartment under dashboard, FKA PANEL VAN, FM3 WET WIPER SYSTEM, GD8 6-speed manual transmission ECO Gear 360, H00 warm air duct to passenger compartment, H12 hot water auxiliary heater, H16 seat heating for driver, H21 heat-insulating glass with band filter on windscreen, HH2 electric auxiliary air heater, HH9 SEMI-AUTOMATICALLY CONTROLLED TEMPMATIC AIR CONDITIONING, IL5 left-hand drive, IR6 wheelbase 4325 mm, rear overhang 1615 mm, IT4 3.5-tonner, J10 speedometer km/h, J55 seat belt warning device for passenger seat, J58 seat belt warning device for driver's seat, J65 outside temperature display, JA7 Blind Spot Assist, JA8 Crosswind Assist, JB4 Active Lane Keeping Assist, JB7 Parking Package with reverse camera, JF1 rain sensor, JG0 shift point indicator, JH3 communication module (LTE) for digital services, JI7 initial maintenance interval 60,000 km, JK5 instrument cluster with color display, JS2 intelligent speed assist, JW8 ATTENTION ASSIST, KB7 main fuel tank 93 liters, KP7 SCR emission control generation 4, L LEFT-HAND DRIVE, L13 fog lamps with cornering light, L94 parking light omitted, LA2 headlight assist, LB1 side marker lights, LB5 third brake light, LE1 adaptive brake light, LX5 Europe, M60 alternator 14 V / 250 A, M6B EMISSION CLASS EURO 6E TO N1, M72 vehicle HVO capable, MJ8 ECO start-stop function, MK2 speed limiter 130 km/h, MS1 cruise control, MU5 OM 654 DE 20 LA 125 kW (170 HP) 3800 rpm, P4F country set rating Euro-NCAP, Q11 longitudinal member reinforcement, Q67 rear tow hook, R65 spare wheel carrier under frame end, R87 spare wheel, RY2 wireless tire pressure monitoring on front and rear axles, RZ2 wheel manufacturer Magnetto Wheels, S04 adjustable passenger seat, S22 driver's seat armrest, S25 passenger seat armrest, S87 low driver's seat box, SA5 driver airbag, SA6 passenger airbag, SB3 comfort suspension seat, driver's seat, SK0 comfort headrest driver, SK2 driver's seat occupancy detection, T16 right-hand sliding door, T74 entry grab handle, T86 entry grab handle at right rear corner post, U22 pre-installation seat configuration 3/-/-, U65 passenger compartment seating 3-seater bench 1st row, V36 roof lining, V40 Kombi floor assembly, V43 wood flooring, VA1 load compartment trim up to standard belt rail, VA7 storage compartment with net in rear doors, VF7 Maturin black fabric, W16 fixed window front left in side wall/sliding door, W17 fixed window front right in side wall/

Condition: ready for operation (used), functionality: fully functional, The FlexWall®Plus FW40/5 is a dosing device for poorly to severely free-flowing bulk materials. It consists of the following assemblies: a trapezoidal stainless steel housing, a flexible polyurethane trough with a large cross-section, massage paddles, a dosing screw, a screw tube, a three-phase drive and a trapezoidal extension hopper with a volume of 50 dm³ or 70 dm³, with a low installation height. The shape of the trough and the external massage paddles with adjustable amplitude ensure a consistent screw fill level and gentle mass flow of the bulk material. Changing the screw on the FW40/5 is only done from the front. The FlexWall®Plus enables easy disassembly for wet or dry cleaning, with the polyurethane trough simply being pulled off the housing rim. Furthermore, the compact trapezoidal design allows space-saving arrangement of up to six dosing units around a central feeding point. Nodpfx Abownr Trsyedc

Condition: good (used), Used stainless steel tank / transport container Njdpewfnq Uofx Abysdc Item number: 10863 Last intended use: Alcohol Volume: 650L Type: Upright in a galvanized stacking rack Material (wetted parts): 1.4301 / AISI 304 Design: Single-walled Operating pressure according to nameplate: ATM Tank dimensions: Overall width: 1030mm Overall length: 1230mm Overall height: 1360mm Materials: Interior: 1.4301 / AISI 304 Exterior parts: Galvanized steel Fittings: Domed cover on the top 400mm Nameplate: None Outlet diameter: DN50 Distance from outlet to floor: 210mm Outlet type: Disc valve Empty weight: 134kg

Condition: used, mileage: 20,250 km, power: 120 kW (163.15 HP), first registration: 02/2026, fuel type: diesel, overall weight: 3,200 kg, fuel: diesel, energy efficiency: G, color: blue, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 7, total width: 2,249 mm, total height: 1,901 mm, Equipment: air conditioning, airbag, all wheel drive, cruise control, navigation system, onboard computer, parking heater, parking sensors, power assisted steering, seat heater, sliding door, soot filter, E07 Hill-start assist, D34 Panoramic sliding sunroof, F2W Winter package, JA7 Blind spot assist, P2Y STYLE Plus package, Q50 Trailer coupling, ball head, removable, T55 Electric operation for right-hand sliding door, T56 Electric operation for left-hand sliding door, 02B OPERATING MANUAL AND SERVICE BOOKLET - GERMAN, 056 AEJ X5/2, 502 Digital extra: Updates for intelligent speed assistant, 553 Trailer maneuvering assist, 7B4 WIPPS countries WEU+COC, 806 AEJ X5/1, 875 Wet wiper wiper blades, heated, A1M Rear axle shaft without manufacturer specification, B25 Parking brake, electric, BA3 Active brake assist, BB6 Brake booster failure compensation, BB7 CO2-optimized braking system, BH1 HOLD function, BS1 Brake calipers with Mercedes-Benz lettering, C6L Multifunction steering wheel, C74 "Mercedes-Benz" lettering on door sills, illuminated, CA1 AGILITY CONTROL chassis, CA3 Active steering assist, CK8 Steering wheel heating, CL1 Steering wheel adjustable in inclination and height, CL3 Leather steering wheel, CM2 Bumpers and attachments painted in vehicle color, D14 Roof rails, anodized, E1D Digital radio (DAB), E1E Digital extra: Hard drive navigation, E1T Touchpad, E28 Additional battery for retrofitted consumers, E2Q MBUX Augmented Reality for navigation, E36 Separating relay with additional battery, E4S Digital extra: Smartphone integration, E7H MBUX multimedia system High, ED4 Fleece battery 12 V 92 Ah, EL9 2-way speakers front and rear, ES2 12 V socket in trunk / cargo area, ES3 12V sockets for rear seat rows on the right and left, ET4 Active distance assist DISTRONIC, EW6 Digital extra: Remote Services Plus, EY2 Digital extra: Live Traffic Information, EY5 Mercedes-Benz emergency call system, EY6 Breakdown management, F1O Center console with storage compartment + cupholder, middle version, F., We are available by phone Monday to Friday until 8:00 PM and Saturday until 4:00 PM! Further:!! Leasing/financing and trade-in possible!! !! !! -Errors and prior sale excepted!! -All information without guarantee ... more on our homepage Ndjdszz R A Ajpfx Abyjc

Condition: used, mileage: 53,550 km, power: 125 kW (169.95 HP), first registration: 06/2025, fuel type: diesel, overall weight: 3,500 kg, fuel: diesel, energy efficiency: G, color: white, gearing type: mechanical, suspension: steel, number of seats: 3, total width: 2,345 mm, total height: 2,280 mm, Equipment: air conditioning, airbag, cruise control, immobilizer system, navigation system, onboard computer, power assisted steering, seat heater, soot filter, E07 Hill-start assist, F2W Winter package, 055 AEJ X4/2, 502 Digital extra: Updates for intelligent speed assistant, 805 AEJ X4/1, A50 Front axle with increased load capacity, B25 Parking brake, electric, BA3 Active brake assist, BH8 Control code for hydraulic unit variant 7, BK3 Control code for wheel brake configuration 3, C6L Multifunction steering wheel, CB7 Stabilization level I, CL1 Steering wheel adjustable in height and tilt, CT1 Vibration damper, E1D Digital radio (DAB), E1E Digital extra: Hard disk navigation, E1U USB socket 5 V, E2A Connection for special signals in the cockpit, E2I Auxiliary battery for retrofitted consumers, interior, E30 Battery main switch, single-pole, E36 Separating relay for battery additionally, E46 Socket in the cab, E4S Digital extra: Smartphone integration, E57 Electrical system for trailer socket, E7M MBUX multimedia system, ED4 AGM battery 12 V 92 Ah, ED8 Pre-installation electrical system, parameterizable special module, ES0 Jump start - contact, ES5 Charging package, instrument panel, EW6 Digital extra: Remote Services Plus, EY2 Digital extra: Live Traffic Information, EY5 Mercedes-Benz emergency call system, EY6 Breakdown management, F68 Exterior mirrors, heated and electrically adjustable, FF5 Storage compartment above the windshield, FG8 Cupholder in front, FJ1 Folding cover for storage compartment, FJ4 Storage compartment under the cockpit, FM3 WET WIPER SYSTEM, FR7 Pre-installation electrical system for reversing assist, FU5 Exterior mirrors without indicator, FZ5 Anti-theft and burglary alarm system, GD8 6-speed manual gearbox ECO Gear, H15 Seat heating for front passenger, H16 Seat heating for driver, H21 Thermally insulated glass with band filter on the windshield, HH9 Semi-automatic controlled TEMPMATIC air conditioning, HI1 Climate zone 1 (cold/comfort), IF3 Chassis with cab, IG5 Basic, IH1 Head unit Euro., We are available by phone from Monday to Friday until 8:00 PM and on Saturdays until 4:00 PM!! More:!! Leasing/financing and trade-in possible!! !! !! -Errors and prior sale excepted!! Ndodpsz Eir Uofx Abyjc -All information without guarantee ... more on our homepage

Condition: used, Year of construction: 2015, functionality: fully functional, KNOLL Chip Removal Central System with Pump Technology Njdpfxez D Uz Ss Abyedc 25,000 Liters Systems with Pump Technology A conveying and filtering system with pump technology is suitable for the fully automatic transport of chips from several machining centers to a central filtration unit. The coolant serves as the carrier medium. This system is particularly advantageous in production areas with a large number of machines. It has a space-saving design and is flexible in terms of height. The user has all the options to freely arrange and rearrange their machine park. The maintenance and care effort is low. Areas of Application The closed-loop system is suitable for the fully automatic return of the chip/coolant mixture from several machining centers to a central separator/filter. This supplies the machines with cleaned coolant. The system is used in large production areas with a machine park of 30 or more machines and as an isolated solution (wet machining). Features • High flexibility in the installation or rearrangement of the machine park • Low space requirement due to above-ground pipelines • No system components within the floor of the hall • Low maintenance and care effort Main Components • Chip conveyor (optional) • Chip shredder (optional) • Return pump stations • Return line piping • Chip pre-separator (optional) • Dirty and/or clean tank • Coolant filter system (e.g., band filter or backwash filter) • Supply pump(s) • Supply line piping • Pressure boosting stations, central or decentralized (optional) • Control technology • Downstream chip processing system (optional)