Used Weima Eco 600 for sale (78)

Condition: used, Year of construction: 2018, rotor diameter: 368 mm, rotor width: 1,500 mm, No. 10027 Single-shaft shredder AMIS / WEIMA WT 15 Used, year of construction 2018, approx. 250 operating hours According to our customer, the machine is fully functional and can be viewed and tested on site Single-shaft shredder for cables, plastics & recycling Bdjdpfxjxwdiue Acvsa Feed opening 1500 x 1160 mm LW Rotor width 1500 mm Rotor diameter 368 mm Rotor speed approx. 90 rpm Motor output 90 kW Throughput capacity approx. 5 tons per hour (depending on material) System output 99 kW Power consumption 210 A Voltage 400 V / 50 Hz PLC control Siemens SIMATIC Built-in screen with 20 mm screen hole diameter Replacement screen with 50 mm screen hole diameter The high-performance shredder in the WT series is ideal for processing a wide variety of plastics - especially difficult, flexible materials such as films, filaments, big bags, tapes, carpets, textiles, foams and all loose and non-bulky waste materials. The WING-RAM swing arm ensures that even contaminated or moist material is fed safely. Incl. angled conveyor belt / discharge belt AMIS FB 7000 x 1500 x 580 / year of construction 2018 / 1.5 kW Incl. magnetic separator AMIS Installation dimensions approx. 9000 x 3500 x 3950 mm LWH Transport dimensions single-shaft shredder approx. 3000 x 2700 x 3200 mm LWH Weight approx. 12500 kg Sale on behalf of customer, ex location near 69123 Heidelberg, without dismantling, without transport and assembly Dismantling, transport and loading by us optionally possible Errors in description and price excepted To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: ready for operation (used), TECHNICAL SPECIFICATIONS: FOR SHREDDING WOOD WASTE SHAFT WIDTH: 800 MM SHAFT DIAMETER: 300 MM NUMBER OF KNIVES: 18 KNIFE DIMENSIONS: 30/30 MM HOPPER: 1000X800X900 MM SCREEN DIAMETER: 15 MM DISCHARGE DIAMETER: 200 MM EMERGENCY STOP SWITCH POWER SUPPLY: 400 V MOTOR POWER: 22 KW OVERALL DIMENSIONS: LENGTH: 2000 MM WIDTH: 1600 MM HEIGHT: 1800 MM Bodpfsyw I Ahjx Acvjda

Condition: excellent (used), operating hours: 820 h, Residual Wood Shredder Manufacturer: WEIMA Type: WL 4 Feed opening: 600 mm x 800 mm Hopper capacity: 0.6 m³ Throughput rate: depends on material and screen Rotor diameter: 252 mm Rotor speed: 60 - 100 rpm Motor power: 18.5 kW Tools: 14 knives Bedpjylaf Ajfx Acvjda Screen perforation: 20/25 mm Extraction nozzle diameter: 160 mm Air velocity: 28 m/sec Weight: approx. 1,200 kg Dimensions (L x W x H): 1600 x 1150 x 1655 mm Including all documentation Note on used machines: • Technical data and prior sale subject to change without notice. • Stated prices are ex location, loaded onto truck, ready for pickup. • Machines have been cleaned and function tested. • All machines are purchased as inspected, without any guarantee or warranty claims. Buyers are welcome to inspect the machines at our premises. • Special agreements are valid only in written form. (We only respond to inquiries that include your address and telephone number!)

Condition: as good as new (ex-display), Year of construction: 2026, Quiet and slow runner WL 4/18,5 kW Technical data: Hopper opening: 600 x 800 mm Hopper opening with logspacer:600 x 1050 mm hopper capacity: approx. 0,6 m³ Working width of the rotor: 600 mm Diameter of the rotor: 252 mm Number of knives: 28 pieces Knives: 40 x 40 mm concave Sieve perforation: 15/20 mm Included: Control cabinet Electrical control Star-delta start-up Rubber vibrating elements 2nd row of knives Logspacer (free cutting hopper) Bdodpfx Ajbtnftjcvja Top equipment Location: Ex stock Bitburg - immediately available - at a special price

Condition: as good as new (ex-display), Year of construction: 2026, Quiet and slow runner WL 4/18,5 kW Technical data: Hopper opening: 600 x 800 mm Hopper opening with logspacer: 600 x 1050 mm hopper capacity: approx. 0,6 m³ Working width of the rotor: 600 mm Diameter of the rotor: 252 mm Bsdpjbunq Hefx Acvsda Number of knives: 28 pieces Knives: 40 x 40 mm concave Sieve perforation: 15/20 mm Included: Control cabinet Electrical control Star-delta start-up Rubber vibrating elements 2nd row of knives Logspacer (free cutting hopper) Location: 54634 Bitburg Immediately available

Condition: new, Year of construction: 2026, Super special price, as it was on display at our in-house exhibition. Operating hours: 2 Available immediately - subject to prior sale If gone - then gone Compact design, high reliability and an excellent price-performance ratio excellent price-performance ratio: these are the advantages of this machine, which is perfect for briquetting materials such as wood such as wood, polystyrene, foam or paper. Special feature: the screw pre-compaction, which guarantees a guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. mounted on a stable base frame Overall dimensions: 1900 x 1410 mm Hopper opening: 1044 x 1044 mm Hopper height: 1010 mm Hopper capacity: 1.1 m³ Drive power: 4 kW Bdedpfxslht H Eo Acvea Briquette diameter (mm) 40 Throughput capacity (kg/h) 30-40 Hydraulic oil volume (l) 100 Weight (kg) 530 Equipment: Press Powerful pressing mechanism with low-wear, chrome-plated tongs Pre-compressor with end-sensitive cylinder and screwed cover Control box with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Container with agitator and gear motor Screw channel with discharge screw and gear motor gear motor Accessories: Briquette length monitoring Automatic on - off Location: 54634 Bitburg

Condition: new, Year of construction: 2026, Weima single shaft shredder type WL 6 Power 18,5 kW Our machine concept WL 6 The Weima high performance shredders with their flexible can process all kinds of wood materials (hardwood, softwood, chipboard, MDF materials softwood, chipboard, MDF materials, plywood, veneer residues etc. ) into and, in the case of bulky materials, achieve an enormous volume reduction of the material. enormous volume reduction of the material. Mode of operation: The machine is equipped with a large hopper and can be fed by a conveyor belt or by hand. fed by means of a conveyor belt or by hand. This hopper can be adapted to individual needs and guarantees a continuous and cost effective and cost effective material feed without the need for manual assistance. manual assistance. Vqwemi Technical specification WL 6 / 18,5 kW Bsdpfx Acsh Eiw Ievoda Hopper opening: 800 x 1.000 mm hopper capacity: 0,9 m³ working width of the rotor: 800 mm diameter of the rotor: 252 mm Driving power: 18,5 kW Rotor speed: 80 -120 rpm Number of knives: 42 pieces type and size of knives: concave / 40 x 40 mm, cutting reversible crowns Sieve perforation: 10-60 mm possible (standard 15-20 mm) Painting: WEIMA standard RAL 2002 / 7016 connected load: 400 V +/- 5% / 50 Hz weight: approx. 1.600 kg Included: - Switch cabinet ( Rittal ) incl. electrical control ( Moeller / Siemens ) and star-delta start-up - Rubber oscillating elements - V - rotor ( patented ) with knife pockets fixed in the profile - gear limit switch - On

Condition: new, Year of construction: 2026, Weima single shaft shredder type WL 6 Power 18,5 kW Our machine concept WL 6 The Weima high performance shredders with their flexible can process all kinds of wood materials (hardwood, softwood, chipboard, MDF materials softwood, chipboard, MDF materials, plywood, veneer residues etc. ) into and, in the case of bulky materials, achieve an enormous volume reduction of the material. enormous volume reduction of the material. Mode of operation: The machine is equipped with a large hopper and can be fed by a conveyor belt or by hand. fed by means of a conveyor belt or by hand. This hopper can be adapted to individual needs and guarantees a continuous and cost effective and cost effective material feed without the need for manual assistance. manual assistance. Technical specification WL 6 / 18.5 kW hopper opening: 800 x 1.000 mm hopper capacity: 0,9 m³ working width of the rotor: 800 mm diameter of the rotor: 252 mm Driving power: 18,5 kW Rotor speed: 80 -120 rpm Number of knives: 42 pieces Bjdpfx Aeh Hnp Docvjda type and size of knives: concave / 40 x 40 mm, cutting reversible crowns Sieve perforation: 10-60 mm possible (standard 15-20 mm) Painting: WEIMA standard RAL 2002 / 7016 connected load: 400 V +/- 5% / 50 Hz weight: approx. 1.600 kg Included: - Switch cabinet ( Rittal ) incl. electrical control ( Moeller / Siemens ) and star-delta start-up - Rubber oscillating elements - V - rotor ( patented ) with knife pockets fixed in the profile - gear limit switch - Contact pressure

Condition: like new (used), Year of construction: 2026, operating hours: 1 h, Super special price, as it was on display at our in-house exhibition. Operating hours: 1 Available immediately - subject to prior sale If gone - then gone Compact design, high reliability and an excellent price-performance ratio excellent price-performance ratio: these are the advantages of this machine, which is perfect for briquetting materials such as wood such as wood, polystyrene, foam or paper. Special feature: the screw pre-compaction, which guarantees a guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. mounted on a stable base frame Overall dimensions: 1900 x 1410 mm Hopper opening: 1044 x 1044 mm Hopper height: 1010 mm Hopper capacity: 1.1 m³ Bdedpjtnz Ttsfx Acvoa Drive power: 4 kW Briquette diameter (mm) 40 Throughput capacity (kg/h) 30-40 Hydraulic oil volume (l) 100 Weight (kg) 530 Equipment: Press Powerful pressing mechanism with low-wear, chrome-plated tongs Pre-compressor with end-sensitive cylinder and screwed cover Control box with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Container with agitator and gear motor Screw channel with discharge screw and gear motor gear motor Accessories: Briquette length monitoring Automatic on - off Location: 54634 Bitburg

Condition: new, Year of construction: 2026, Weima chipper / shredder WL 8 The WL 8 single-shaft shredder is a proven classic for shredding all types of wood waste. It is used, for example, thousands of times in wood-processing plants all over the world. The high quantity of these highly demanded shredders guarantees a proven and reliable technology at the best price-performance ratio. The machines are characterized by their very robust design, which ensures an extremely long service life (even outdoors). Intuitive operation thanks to Siemens PLC control with touch display. To ensure that the electronics are optimally matched to the machine, we design, build and wire our control cabinets ourselves. We only use high-quality components - for example from Siemens or Rittal. Intuitive touch interfaces guarantee quick adjustments. Functions such as setting the slider clock or stop ensure high throughput. The built-in overload protection also prevents defects in the machine. No material bridges due to free-cutting hopper design The hopper fulfills several tasks at once. First, the material to be shredded is fed through it - manually, mechanically, or by conveyor belt. The generous opening makes it easy to fill even very large parts. However, its special design, which is rounded at the front and thus effectively prevents material bridges, is decisive for shredding. Even with bulky parts, the shredder cuts itself free. If required, both hopper extensions and lids with gas pressure springs are available. Durable rotor bearings thanks to offset design A rotor bearing must be particularly robustly built due to the extreme stresses it is subjected to during shredding operation. To prevent dust or foreign matter from getting inside it, we have set it apart from the machine frame. This also makes it very maintenance-friendly and easy to access. Rotor diameter (mm): 260 Rotor length (mm): 1000 Rotor speed (rpm): 80 - 125 Bodpfxomhh Ids Acvoda Power (kW) 22 Number of knives: 54 Available knife sizes (mm): 40 x 40 Grain size (mm): Suction port (mm): 200 Feed opening (mm): 1000 x 1250 length (mm): 2045 width (mm): 1740 height (mm): 1840 Weight (approx. kg): 2200 Accessories: - 2nd row of knives - logspacer Location: Comes to stock 54634 Bitburg

Condition: new, Year of construction: 2026, Weima chipper / shredder WL 8 The WL 8 single-shaft shredder is a proven classic for shredding all types of wood waste. It is used, for example, thousands of times in wood-processing plants all over the world. The high quantity of these highly demanded shredders guarantees a proven and reliable technology at the best price-performance ratio. The machines are characterized by their very robust design, which ensures an extremely long service life (even outdoors). Intuitive operation thanks to Siemens PLC control with touch display. Bdedpfx Acepdqzxovea To ensure that the electronics are optimally matched to the machine, we design, build and wire our control cabinets ourselves. We only use high-quality components - for example from Siemens or Rittal. Intuitive touch interfaces guarantee quick adjustments. Functions such as setting the slider clock or stop ensure high throughput. The built-in overload protection also prevents defects in the machine. No material bridges due to free-cutting hopper design The hopper fulfills several tasks at once. First, the material to be shredded is fed through it - manually, mechanically, or by conveyor belt. The generous opening makes it easy to fill even very large parts. However, its special design, which is rounded at the front and thus effectively prevents material bridges, is decisive for shredding. Even with bulky parts, the shredder cuts itself free. If required, both hopper extensions and lids with gas pressure springs are available. Durable rotor bearings thanks to offset design A rotor bearing must be particularly robustly built due to the extreme stresses it is subjected to during shredding operation. To prevent dust or foreign matter from getting inside it, we have set it apart from the machine frame. This also makes it very maintenance-friendly and easy to access. Rotor diameter (mm): 260 Rotor length (mm): 1000 Rotor speed (rpm): 80 - 125 Power (kW) 22 Number of knives: 54 Available knife sizes (mm): 40 x 40 Grain size (mm): Suction port (mm): 200 Feed opening (mm): 1000 x 1250 length (mm): 2045 width (mm): 1740 height (mm): 1840 Weight (approx. kg): 2200 Accessories: - 2nd row of knives - logspacer Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, your benefits Sturdy press mechanism with low-wear, chrome-plated tongs Pressing chamber wear bush Pre-compressor with end-position-sensed cylinder and screwed cover Control box with SPS-control Screw channel with discharge screw Separate oil tank with pump motor and valve control Safety switch for oil temperature Mounting on stable base frame with rubber feet Briquette quantity monitoring Robust construction, low-maintenance technology, little space requirement: The machines of the C-series are particularly suitable for small and medium-size enterprises, whose required throughput does not exceed 50-80 kg/h or 200 to 400 kg/day. Practically any suitable material can be briquetted, e.g. wood, polystyrene, foam, paper or biomass. All machines are available as left- or right-hand version. The mounting on a stable base frame ensures a quick installation and makes mobile use possible. Briquette diameter (mm) 50 Throughput capacity up to (kg/h) 50 (depending on material) Hydraulic motor (kW) 5,5o Screw motor (kW) 0,55 Oil quantity (litres) 100 Weight (kg approx.) 800 Outstanding features at a glance Hydraulics with separate oil tank: temperature-controlled hydraulic unit, complete valve control, pump motor for long running times Briquette length monitoring: regulates the length of the briquette to a constant level Pressing area wear bush: Prevents wear in the pressing area Bsdpfxecnz U Ee Acvjda Location: Ex works - free loading

Condition: new, Year of construction: 2026, Weima Briquetting Press TH 714 The TH 714 machines are designed for plants with required throughput rates of up to 150 kg/h. The stable press housing enables the production of high-strength briquettes - from materials such as wood, polystyrene, foams, light metals, paper or biomass. Numerous additional options can be implemented, e.g. oil cooling for multi-shift operation. All machines are available as left- or right-hand version. Mounting on a stable base frame ensures fast installation and makes mobile use possible. User-friendly operation thanks to Siemens PLC control In order to live up to our performance promise, we design and produce all control cabinets ourselves at our Ilsfeld site and equip them with well-known international components. This guarantees highest quality with compact design. The used PLC-control from Siemens is perfectly adapted to the requirements of the briquetting process. Bdsdpfx Acsil Hggevsa Impurity-resistant screw conveyor due to cardanic suspension The screw conveyor, which transports the material into the pre-compressor of the briquetting press, is suspended on a cardan joint. This prevents interfering materials from causing damage to the screw conveyor. As is so often the case, however, it always depends on the specific application which suspension is chosen. For metal applications, for example, we often recommend rigidly mounted screws. Briquette diameter (mm): 70 Throughput capacity up to (kg/h): 150*1 Hydraulic motor (kW): 11 Oil quantity (liters): 250 Weight (approx. kg): 1100 Location: Ex stock 54634 Bitburg - immediately available - subject to prior sale

Condition: like new (used), Year of construction: 2026, operating hours: 1 h, Super special price, as it was on display at our in-house exhibition. Operating hours: 2 Available immediately - subject to prior sale If gone - then gone Compact design, high reliability and an excellent price-performance ratio excellent price-performance ratio: these are the advantages of this machine, which is perfect for briquetting materials such as wood such as wood, polystyrene, foam or paper. Special feature: the screw pre-compaction, which guarantees a guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. mounted on a stable base frame Overall dimensions: 1900 x 1410 mm Hopper opening: 1044 x 1044 mm Hopper height: 1010 mm Hopper capacity: 1.1 m³ Drive power: 4 kW Briquette diameter (mm) 40 Throughput capacity (kg/h) 30-40 Hydraulic oil volume (l) 100 Weight (kg) 530 Equipment: Press Powerful pressing mechanism with low-wear, chrome-plated tongs Pre-compressor with end-sensitive cylinder Bdsdpfetnz Hbox Acvsa and screwed cover Control box with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Container with agitator and gear motor Screw channel with discharge screw and gear motor gear motor Accessories: Briquette length monitoring Automatic on - off Location: 54634 Bitburg

Condition: new, Year of construction: 2026, Compact design, high reliability and an excellent price-performance price-performance ratio: these are the advantages of this machine machine, which is perfectly suitable for briquetting materials such as wood, polystyrene, foam or paper. Special feature: the screw pre-compaction, which guarantees a high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. mounted on a sturdy base frame Overall dimensions: 1900 x 1410 mm Hopper opening: 1044x1044 mm hopper height: 1010 mm hopper capacity: 1,1 m³ driving power: 4 kW Briquette diameter (mm) 40 Throughput capacity (kg/h) 30-40 Hydraulic oil capacity (l) 100 Weight (kg) 530 Equipment: Bdodpjbtnf Eofx Acvoa Press Powerful press mechanism with low-wear, chrome plated tongs Precompressor with end-position-suspended cylinder and screwed cover Control box with PLC control Hydraulics Separate oil tank with pump motor and valve control Safety switch for oil temperature Tank with agitator and gear motor Screw channel with discharge screw and gear motor gear motor Accessories: Briquette quantity monitoring Automatic On - Off Location: 54634 Bitburg

Condition: new, Year of construction: 2026, Weima single shaft shredder type WL 6 Power 18,5 kW Our machine concept WL 6 The Weima high performance shredders with their flexible can process all kinds of wood materials (hardwood, softwood, chipboard, MDF materials softwood, chipboard, MDF materials, plywood, veneer residues etc. ) into and, in the case of bulky materials, achieve an enormous volume reduction of the material. enormous volume reduction of the material. Mode of operation: The machine is equipped with a large hopper and can be fed by a conveyor belt or by hand. fed by means of a conveyor belt or by hand. This hopper can be adapted to individual needs and guarantees a continuous and cost effective and cost effective material feed without the need for manual assistance. manual assistance. Technical specification WL 6 / 18.5 kW hopper opening: 800 x 1.000 mm Bjdpfx Ascbtpkecvsda hopper capacity: 0,9 m³ working width of the rotor: 800 mm diameter of the rotor: 252 mm Driving power: 18,5 kW Rotor speed: 80 -120 rpm Number of knives: 42 pieces type and size of knives: concave / 40 x 40 mm, cutting reversible crowns Sieve perforation: 10-60 mm possible (standard 15-20 mm) Painting: WEIMA standard RAL 2002 / 7016 connected load: 400 V +/- 5% / 50 Hz weight: approx. 1.600 kg Included: - Switch cabinet ( Rittal ) incl. electrical control ( Moeller / Siemens ) and star-delta start-up - Rubber oscillating elements - V - rotor ( patented ) with knife pockets fixed in the profile - gear limit switch - Contact pressure

Condition: good (used), Year of construction: 1992, functionality: fully functional, WEIMA TH 400 briquetting machine - after technical overhaul - Made in Germany - very good condition - year of manufacture 1992 TECHNICAL PARAMETERS: power of main engine 7.5 kW machine output approx. 80 kg/h briquette diameter 50 mm feeding dimension 2000 x 1800 mm adder feeding the material to the piston stirrer machine overall dimensions (length / width / height) 240 / 190 / 200 cm weight ~ 850 kg TH hydraulic briquetting machines are compact equipment for briquette production. Briquetting machines can be filled manually or automatically directly into the hopper. The units of this series, by their small size and quiet operation, are ideal for setting up on the production floor. Characteristics: - reduction of production waste volume - low purchase costs - low energy consumption - compact design takes up little space - excellent processing quality - durable construction and long service life - trouble-free maintenance and low consumption - simple operation Bdsdot U Et Nepfx Acvea The main application scopes of briquetting presses are, for example: - in combination with a dust extraction or filtration and dedusting plant - for manual feeding of material - as a whole combined with a chipper (e.g. WEIMA WL4) - with a screw feeder or conveyor belt - with a mobile dust extraction system or combustion furnace

Condition: excellent (used), Briquette production machine with a diameter of 80 mm and a capacity of 150 to 180 kg per hour, depending on the material. Bdsdpfx Ajyi Utiecvsa The machine has undergone a complete overhaul by an authorized service provider. The hydraulic pump has been replaced with a reinforced cast-iron unit, a steel hydraulic block has been installed, new Rexroth valves, new hydraulic hoses, new hydraulic oil and hydraulic filter, as well as new sealing and wear strips have been fitted. The control cabinet has been serviced, and the screw feeder motor features two speeds. The price includes commissioning within Poland using the customer’s material. For genuinely interested parties, I can provide a video of the machine in operation.

Condition: used, Year of construction: 2002, Single shaft shredder with hydraulic pusher Weima WLK6S Main motor: 37 kW Rotor length: 800 mm Rotor diameter: around 380 mm Rotor knives size: 40x40x23 mm The machine is in very good technical condition, ready for further work. Bdedpfx Aoyi Uqzocvea

Condition: used, Year of construction: 2002, Single shaft shredder with hydraulic pusher Weima WLK6S Main motor: 37 kW Rotor length: 800 mm Rotor diameter: around 380 mm Rotor knives size: 40x40x23 mm The machine is in very good technical condition, ready for further work. Bdsdeyi Upwspfx Acvoa

Condition: used, Year of construction: 2002, Single shaft shredder with hydraulic pusher Bedjyi Ticspfx Acvoda Weima WLK6S Main motor: 37 kW Rotor length: 800 mm Rotor diameter: around 380 mm Rotor knives size: 40x40x23 mm The machine is in very good technical condition, ready for further work.

Condition: excellent (used), Rębak Weima WL6, silnik 18,5KW, długość rotora 800mm, Bdjdsw Aaumepfx Acvea szuflada hydrauliczna, autorewers.

Condition: used, Technical specifications: Bdedpfx Ajyrfigjcvja For shredding wood waste Shaft width: 800 mm Shaft diameter: 300 mm Number of knives: 18 Knife dimensions: 30/30 mm Hopper: 1000x800x900 mm Screen diameter: 15 mm Discharge diameter: 200 mm Emergency stop switch Power supply: 400 V Motor power: 22 kW Overall dimensions: Length: 2000 mm Width: 1600 mm Height: 1800 mm

Condition: used, Year of construction: 2007, SINGLE SHAFT SHREDDER WEIMA MODEL WLK15 Bjdpfx Acoyfwz Iovsda MAIN MOTOR 90KW ROTOR KNIVES SIZE 50X50 (NEW KNIVES) ROTOR LENGTH 1500MM ROTOR DIAMETER 370MM THE MACHINE IS 100% FUNCTIONAL READY TO WORK

Condition: used, Year of construction: 2007, SINGLE SHAFT SHREDDER WEIMA MODEL WLK15 MAIN MOTOR 90KW Bsdpfxoyfwxgs Acveda ROTOR KNIVES SIZE 50X50 (NEW KNIVES) ROTOR LENGTH 1500MM ROTOR DIAMETER 370MM THE MACHINE IS 100% FUNCTIONAL READY TO WORK