Used Weiler Ud 24 for sale (199)

Condition: used, Year of construction: 1995, operating hours: 40,000 h, machine/vehicle number: IntNr231497, For sale is a well-maintained and operational CNC precision lathe, model Weiler UD 24, manufactured in 1995. Technical data: Control system: Siemens Sinumerik 810T Swing over bed: 240 mm Maximum turning diameter: 120 mm Spindle bore: 42 mm Speed range: up to 6,000 rpm Tool turret: 12-station VDI 20 Bar feed: IRCO single bar feeder Pjdpfx Akez E N U Nsierc Equipment & accessories: C-axis: For drilling and milling operations (radial/axial). Loading system: IRCO short bar loader for efficient material supply. Cooling system: Complete coolant system. Full protective guard with safety interlock. Operating and maintenance manuals available. The machine can be inspected under power by appointment. Subject to changes, errors in technical data and specifications, and prior sale!

Condition: good (used), Year of construction: 1995, CNC turning machine WEILER UD 24 CNC, CNC Bosch CC300, bar feeder. Prjdpfx Aksz R R D Eoijc

Condition: good (used), Year of construction: 1997, operating hours: 33,000 h, functionality: fully functional, machine/vehicle number: 323, turning diameter over cross slide: 200 mm, turning length: 950 mm, turning diameter: 410 mm, spindle bore: 54 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 1 rpm, travel distance X-axis: 230 mm, travel distance Z-axis: 950 mm, spindle motor power: 7,500 W, rotational speed (min.): 1 rpm, rotational speed (max.): 3,000 rpm, total height: 1,700 mm, total length: 2,300 mm, total width: 1,400 mm, quill travel distance: 120 mm, quill diameter: 65 mm, quill stroke: 120 mm, swing diameter over cross slide: 200 mm, feed rate Z-axis: 10 m/min, turning diameter over bed slide: 410 mm, turning diameter over top slide: 200 mm, type of input current: three-phase, torque: 700 Nm, overall weight: 2,100 kg, swing diameter over bed slide: 410 mm, bar passage: 54 mm, swing diameter over top slide: 200 mm, spindle nose: DIN 55027 Size 6 type, center height: 200 mm, bar diameter (max.): 54 mm, travel distance cross slide: 230 mm, Equipment: rotational speed infinitely variable, 1997 Weiler E35 Cycle-Controlled CNC Lathe Used 1997 Weiler E35 CNC / Cycle-Controlled Lathe for Sale – Weiler D1 Control – 410mm Swing – 54mm Spindle Bore – 3,000rpm – 10 Tool Holders Manufacturer: Weiler Model: E 35 Machine Type: CnC Lathe Year: 1997 Condition: Working Well Machine Description The Weiler E35 is a high-quality German-built precision lathe combining the flexibility of a conventional centre lathe with the productivity of CNC/cycle-controlled machining. This machine is equipped with the Weiler digital conversational cycle control, allowing straightforward manual machining as well as programmed turning cycles for repeat work, tapers, radii and other common turning operations. With approximately 410mm swing over the bed, 54mm spindle bore and spindle speeds up to 3,000rpm, the E35 is particularly well suited to precision engineering, toolroom work, maintenance departments, repair work and small-to-medium batch production. The machine has approximately 33,000 power-on hours and is supplied with 10 quick-change toolpost holders. Podpfxo Agu A So Akijrc Main Specifications Manufacturer: Weiler Werkzeugmaschinen Model: E35 Year: 1997 Serial Number: 323 Machine Type: Cycle-Controlled / CNC Centre Lathe Control: Weiler Digital Cycle Control / D1-type control Power-On Hours: Approx. 33,000 hours Turning Capacity Swing Over Bed: 410mm Swing Over Cross Slide: 200mm Centre Height: 200mm Spindle Bore: 54mm Maximum Chuck Diameter: 250mm Faceplate Diameter: 355mm Distance Between Centres: 950mm Spindle Spindle Speed Range: 1–3,000rpm Spindle Power: 7.5kW Maximum Spindle Torque: 700Nm Spindle Bore: 54mm Spindle Internal Taper: MT6 Spindle Nose: DIN 55027 Size 6 type The combination of a 54mm spindle bore and substantial torque makes the E35 suitable for both precision finishing and heavier general turning work. Weiler Cycle Control The machine is fitted with the Weiler conversational cycle control, designed to make CNC turning accessible without requiring full conventional G-code programming for every job. The control provides functions for operations such as: Straight turning Facing Taper turning Radius turning Threading Positioning Feed control Spindle speed control Repetitive machining cycles Manual machine operation Conversational cycle programming This type of control makes the E35 particularly attractive to toolrooms and general engineering workshops where both one-off components and repeat batches are produced. Feed & Axis Performance Longitudinal Feed Range: 0.001–20mm/rev Cross Feed Range: 0.001–20mm/rev Longitudinal Rapid Traverse: 10m/min Cross Rapid Traverse: 5m/min Cross Travel: 230mm Tailstock Tailstock Taper: MT4 Tailstock Quill Diameter: 65mm Tailstock Quill Stroke: 120mm The tailstock allows the machine to support longer workpieces and carry out drilling, reaming and centre-working operations. Tooling Included The machine is supplied with: 10 quick-change toolpost holders Electrical Specification Operating Voltage: 400V Frequency: 50Hz Connected Load: 10kW Nominal Current: 18A Control Voltage: 24 / 230V Approximate Machine Dimensions Overall Length: 2,300mm Overall Width: 1,400mm Overall Height: 1,700mm Machine Weight: 2,100kg Please Note: All specifications, dimensions, capacities, speeds and machine details quoted above are approximate and are provided for guidance only.

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, Weiler Praktikant 140 B, lead and draw spindle lathe with toolmaker precision, manufactured in 1988, with a new 3-axis digital display from K&C!!!!! Technical data: >> Year of manufacture 1987, machine no. 87-140-751 >> Center height 140 mm >> Distance between centers 650 mm >> Spindle speeds: from 24 to 2500 rpm >> Spindle bore 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock MK 3 >> Feeds from 0.02 to 0.63 mm/rev >> Possible threads: metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight approx. 680 kg >> Spindle brake can be activated >> Length 1.6 m, height 1.25 m, depth 0.7 m Accessories and equipment: >> New 3-axis digital display from K&C, 12 months manufacturer's warranty with operating manual Functions: Switching mm/inch, coordinate selection ABS/INC, halving the display value, reference mark, tool programming 200 items, taper calculation, radius/diameter, quick zeros, switching the counting direction. >> Quick-change tool holder, collets from 2 to 28 mm in 1 mm increments >> 3-jaw chuck 160 mm Weiler with 2 sets of jaws >> Mulifix size A with 2 steel holders >> Coolant system >> Machine feet >> Bed stop Podpfx Akj Afx R Hjierc >> Splash guard >> Operating manual, parts list About the machine: Offered is a Weiler Praktikant 140 B lead and draw spindle lathe in good condition. This very nice lathe is fully functional, of course. The machine comes from a research center. All slides run smoothly and evenly. Even at high speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and allows surfaces to be produced that appear to be ground. Take advantage of the opportunity to inspect this machine on-site while it is powered up and to convince yourself of its condition.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Weiler Praktikant 160 B, lathe with guide and draw spindle, year of manufacture 2000, with 3-axis digital display K&C, NEW, CE marking!! Technical data: >> Year of manufacture 2000, machine no. 4651 >> Center height 160 mm >> Distance between centers 650 mm >> Spindle speeds: from 24 to 2500 rpm >> Spindle bore 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock MK 3 >> Feeds from 0.02 to 0.63 mm/rev >> Possible threads: metric, inch, module and diametral pitch Prods Afxq Sspfx Akijc >> Metric thread pitches from 0.25 to 8 mm >> Weight approx. 680 kg >> Spindle brake can be switched on >> Length 1.6 m, height 1.25 m, depth 0.7 m Accessories and equipment: >> 3-axis digital display from K&C, new, 12 months manufacturer's warranty, with operating manual Functions: switching mm/inch, coordinate selection ABS/INC, halving the display value, reference mark, tool programming 200 pieces, taper calculation, radius/diameter, quick zeroing, switching the counting direction >> Quick-change tool holder, collets from 2 to 28 mm, increasing in 1 mm steps >> 3-jaw chuck 160 mm Röhm with 2 sets of jaws >> Mulifix size A with 2 steel holders >> Electric chuck guard >> Bed stop, drill chuck >> Back wall >> Machine feet >> Coolant system >> Operating manual, parts list (PDF) About the machine: Offered is a Weiler Praktikant 160 B lathe with guide and draw spindle, year of manufacture 2000, in very good condition. The machine is fully functional and has CE marking. All slides run very smoothly and evenly. The Weiler comes from a training workshop. Even at high speeds, the Weiler runs smoothly. This newer generation of Weiler lathes is very user-friendly and allows for the production of surfaces that appear to be ground. Take the opportunity to inspect this machine on site and under power to convince yourself of its condition.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Weiler Praktikant 160 B guide and pull spindle lathe with 3-axis digital display from K&C, from a vocational school. Technical data: >> Year of manufacture 1992, machine no. 92 160 3220 >> Center height 160 mm >> Center distance 650 mm >> Spindle speeds: from 24 to 2500 rpm >> Spindle bore 40 mm >> Short taper spindle head DIN 55027, size 5 with bayonet lock >> Tailstock MK 3 >> Feeds from 0.02 to 0.63 mm/rev >> Possible threads: metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight approx. 680 kg >> Spindle brake can be activated >> Length 1.6 m, height 1.25 m, depth 0.7 m Accessories and equipment: >> 3-axis digital display from K&C with operating manual Functions: Switching mm/inch, ABS/INC coordinate selection, halving the display value, reference mark, tool programming 200 items, taper calculation, radius/diameter, quick zeroing, switching the counting direction, >> 3-jaw chuck 160 mm with 2 sets of jaws >> 4-jaw chuck with 2 sets of jaws >> 3-jaw chuck with individually adjustable jaws Psdpfx As Afyg Nokierc >> Multifix A with 2 steel holders >> Bed stop, drill chuck >> Electronic spindle protection >> Rear panel >> Coolant system >> Operating manual, parts list About the machine: Offered is a Weiler Praktikant 160 B guide and pull spindle lathe, manufactured in 1992 with toolmaker precision, in very good condition. The machine is, of course, fully functional. All slides move very smoothly and evenly. Even at high speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and allows surfaces to be produced that are as smooth as ground. Take advantage of the opportunity to inspect this machine on-site while it is powered and convince yourself of its condition.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Weiler Praktikant VCD Precision Lathe (2021) Manufacturer: Weiler Model: Praktikant VCD Precision Lathe Year of manufacture: 2021 Condition: Used, excellent, like new, incl. new maintenance and measurement protocol prior to sale Centre distance: 650 mm Centre height: 160 mm Swing over bed: 320 mm Swing over cross slide: 190 mm Cross slide travel: 150 mm Top slide travel: 110 mm Top slide swivel range: +/-65° Bed saddle guideway length: 350 mm Bed width: 205 mm Tool shank cross-section (H x W): 20 x 20 mm Height from top slide to turning centre: 30 mm Spindle head according to ISO DIN 702-3 (DIN55027) size 5 Spindle diameter in front bearing: 70 mm Spindle bore: 43 mm Main spindle taper metric 50 Drive power: 6 kW Speed range: 30 – 4,000 rpm Number of gear stages: 1 Number of speeds: stepless Number of feeds: 24 Longitudinal feed: 0.02 – 0.63 mm/rev Facing feed: 0.006 – 0.2 mm/rev Quill diameter: 40 mm Pjdpfxjztyrqo Akierc Quill stroke: 85 mm Quill taper: 3 Morse taper Weight, without packaging and accessories: approx. 1,150 kg Dimensions (L x W x H), net: 1,720 x 890 x 1,700 mm Headstock / Rear cover / Sliding guard: Light grey RAL 7035 Machine base / Machine bed: Basalt grey RAL 7012 Display housing: Blue NCSS 4550-R80B

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, Weiler Commodor lathe with lead screw and tailstock, equipped with a 3-axis digital display Heidenhain ND780. In very good condition!!! Technical data: >> Year of manufacture 1991, Machine No. 3120 >> Center height 180 mm >> Distance between centers 1000 mm >> Spindle speeds: from 13 to 2000 rpm >> Spindle bore 56 mm >> Short taper spindle head DIN 55027 size 6 with bayonet lock >> Tailstock MK 4 >> Feeds from 0.026 to 0.888 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.35 to 12 mm >> Weight approx. 1500 kg >> Spindle brake can be switched on >> Drive power 2.0/4.0 kW >> Length 2.2 m, height 1.5 m, depth 1 m Prsdpfxs Agnrgo Akisc Accessories and equipment: >> 3-axis digital display from Heidenhain ND780 >> 3-jaw chuck 200 mm, 1 set of jaws >> Mulifix size B with 2 steel holders >> Drill chuck >> Bed stop >> Machine feet About the machine: Offered is a Weiler Commodor lathe in very good, fully functional condition. The machine comes from a state-owned company where it was used very little. The Commodor is one of the largest manual lathes manufactured by Weiler. A very robust and powerful machine. The 3-axis digital display from Heidenhain makes working with it even easier and more precise. The machine has been electrically and mechanically inspected by us. A complete oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to inspect and test this machine on-site while it is powered up.

Condition: good (used), Weiler lathe Psdpfxjl Ayd Re Akierc Turning diameter bed: 280 mm Turning diameter support: 180 mm Turning length: 800 mm Spindle bore: 24 mm Speed max: 1600 RPM Diameter faceplate: 140 mm Included tools and coolant pumpe Dimensions: 156x70x133 cm LxWxH

Condition: ready for operation (used), Year of construction: 2018, spindle speed (max.): 4,000 rpm, travel distance X-axis: 150 mm, travel distance Z-axis: 500 mm, spindle motor power: 4,000 W, total height: 1,700 mm, total width: 890 mm, overall weight: 1,050 kg, bar diameter (max.): 43 mm, product length (max.): 1,570 mm, workpiece diameter (max.): 280 mm, number of slots in tool magazine: 4, number of axes: 2, Horizontal turning machine manufactured in 2018. This Weiler PRIMUS VCD features a connected load of 7.5 kVA and operates at a nominal current of 15.5 A. With a machine weight of 1050 kg, it is designed for robust performance. If you are looking to get high-quality turning capabilities, consider the Weiler PRIMUS VCD machine we have for sale. Contact us for further details. • Machine Type: Centre Lathe • Turning Length / Distance Between Centres: 500 mm • Swing Over Bed: 280 mm • Swing Over Cross Slide: 150 mm • Spindle Nose (DIN 55027): Size 5 • Front Bearing Diameter: 70 mm Podozpwh Uepfx Akijrc • Spindle Bore: 43 mm • Main Spindle Internal Taper: ME 50 • Drive Power (100% Duty Cycle): 4 kW • Spindle Speed Range: 30 – 4,000 rpm • Number of Feed Rates: 24 • Longitudinal Feed Range: 0.02 – 0.63 mm/rev • Cross Feed Range: 0.006 – 0.20 mm/rev • Metric Thread Range: 0.25 – 8 mm • Inch Thread Range: 80 – 2 TPI • Module Thread Range: 0.25 – 4 Module • Diametral Pitch (DP) Thread Range: 200 – 5 DP • Tailstock Quill Diameter: 40 mm • Tailstock Quill Travel: 85 mm • Tailstock Taper: MT3 • Operating Voltage: 400 V • Control Voltage: DC 24 V • Connected Load: 7.5 kVA • Nominal Current: 15.5 A • Frequency: 50 Hz • Main Fuses: 25 A • Machine Weight: 1,050 kg • Machine Dimensions (L × W × H): 1,570 × 890 × 1,700 mm Additional Equipment • 4-Position Quick-Change Tool Post PARAT Size 1, incl. 1 × WD 1/12 Tool Holder • 2 × WD 1/12 Tool Holders • Lever-Operated Collet Chuck for 173 E Collets • 13 × 173 E Collets, Clamping Range: 3–15 mm (1 mm Increments) • Fixed Steady Rest with Roller Jaws, Capacity: 15–100 mm • Movable Chip Splash Guard with Viewing Window • 8 × Levelling Elements Technical Specification Counter Spindle No Driven Tools No

Condition: used, Year of construction: 1992, functionality: fully functional, Weiler Praktikant 160 B Lead and Draw Spindle Lathe, built in 1992, with a new 3-axis digital display from K&C, from a vocational training workshop! Technical data: >> Year of manufacture 1992, Machine No. 92-160-2994 >> Center height 160 mm >> Distance between centers 650 mm >> Spindle speeds: from 24 to 2500 rpm >> Spindle bore 40 mm >> Short taper spindle head, DIN 55027, size 5, with bayonet lock >> Tailstock, MK 3 >> Feeds from 0.02 to 0.63 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight approx. 680 kg >> Spindle brake, switchable Prodpjzd Tycefx Akisc >> Length 1.6 m, height 1.25 m, depth 0.7 m Accessories and equipment: >> 3-axis digital display from K&C with operating manual Functions: Switching mm/inch, coordinate selection ABS/INC, halving of the display value, reference mark, tool programming 200 pieces, taper calculation, radius/diameter, quick zeros, switching of the counting direction >> 3-jaw chuck 160 mm with 1 set of jaws >> Tool clamping system with 2 steel holders >> Bed stop >> Centering point >> Coolant system >> Rear panel >> Machine feet >> Electronic spindle protection >> Operating manual Additional accessories such as collets, 4-jaw chucks, steady rests, and more are available at an extra charge. For safety: Electronic spindle protection, cover for the lead and draw spindle, 2 emergency stop buttons, spindle brake, electronic door protection for the change gears. About the machine: Offered is a Weiler Praktikant 160 B lead and draw spindle lathe in very good condition. All slides run smoothly and evenly. Even at high speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and allows surfaces to be produced that are as smooth as if they had been ground. Take advantage of the opportunity to inspect this machine on-site while it is powered up and see its condition for yourself.

Condition: excellent (used), Year of construction: 1993, 1 used lathe with guide and draw spindle Manufacturer: Weiler Type: Praktikant 160 B Year of manufacture: 1993, with 3-axis digital display, very good condition, CE compliant Technical data: Center height: 160 mm Center distance: 650 mm Spindle speeds: from 24 to 2500 rpm Spindle bore: 40 mm Short taper spindle head, DIN 55027, size 5, with bayonet lock Tailstock: MK 3 Feeds: from 0.02 to 0.63 mm/rev Possible threads: metric, inch, module, and diametral pitch Metric thread pitches: from 0.25 to 8 mm Weight: approx. 680 kg Spindle brake can be engaged Length: 1.6 m, height: 1.25 m, depth: 0.7 m Accessories and equipment: Pedpfozq R Ecox Akiorc 3-axis digital display The machine comes from a vocational training center and is in very good condition.

Condition: good (used), Year of construction: 2008, functionality: fully functional, Weiler DZ 40, Year of manufacture: 2008, Siemens 840 D control, Travel X/Z: 200/350 mm, Turning diameter: 180 mm, Max. swing diameter: 560 mm, Y-axis: +/-25 mm, Q-axis / programmable tailstock, Q-axis travel: 360 mm, Q-axis measuring system: rotary, Tailstock: MK 4, Main spindle max. bar capacity: 42 mm, Spindle bore: 52 mm, Rapid traverse X/Z/Q: 30/30/20 m/min, Turret: 16 stations – all driven, VDI 25, Podpfx Ajz Sml Iokijrc Shank diameter: 25 mm, Driven tools up to 4,500 rpm, Parts catcher, Accessories, Driven tool holders, Fixed holders,

Condition: used, L + Z lathe WEILER, type LZ PRIMUS GS Machine no. 1984, year of manufacture 1981 Distance between centers 400 mm Predez N H Dqopfx Akisc Turning diameter over bed 250 mm Height of centers over bed 125 mm Turning diameter over carriage 140 mm Height of centers over carriage 70 mm Spindle bore 24 mm Spindle speed 60 - 3000 rpm, 18 steps Feed in longitudinal and facing directions Chuck flange, short taper DIN 55022, size 4 Tailstock internal taper MK 2 Drive power 1.1 kW and 1.5 kW, pole-reversing Power supply 380 volts, 50 Hz - Spindle speed controlled via 2 motor speeds and 9 gear stages - 3-jaw chuck WEILER, Ø 125 mm, with soft jaws - Quick-change tool holder MULTIFIX with 2 interchangeable cassettes - Coolant system - Collet set Ø 3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 / 12 / 14 / 15 / 16 / 18 / 20 mm - 1 centering point for collet chuck - Turning center flange - Emergency stop - Folding chuck guard with electrical monitoring - Splash guard Space requirement L x W x H 1200 x 650 x 1380 mm Weight 325 kg Good condition

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, Weiler high-precision lathe, model Condor 81, with lead and pull spindle, featuring a 3-axis digital display, Heidenhain ND780, from a training workshop. Technical data: >> Year of manufacture: 1988, Machine No. 88-955 >> Center height: 165 mm >> Distance between centers: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle head, DIN 55027, size 5, with bayonet lock >> Tailstock: MK 3 Prodpfx Ako Afxx Hjioc >> Feeds: from 0.015 to 0.46 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches: from 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake can be activated >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Accessories and equipment: >> 3-axis digital display, Heidenhain ND780 >> 1 three-jaw chuck, new, with 2 sets of jaws >> Collet chuck system, collets from 3 to 30 mm, 40 collets, some in duplicate >> Mulifix size B with 3 steel holders >> Bed stop >> Machine feet >> Drill chuck >> Follower rest For safety: >> Guard for the lead and pull spindle >> 2 emergency stop buttons >> Spindle brake About the machine: For sale is a used Weiler Condor 81 lathe, manufactured in 1988, in very good condition. The machine is fully functional. The lead and pull spindle are equipped with a guard for safety. This Weiler lathe comes from a training workshop. It is a very robust and powerful machine. The 3-axis digital display from Heidenhain makes operation even easier and more precise. The machine has been electrically and mechanically inspected by us. A complete oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to inspect and test this machine on-site while it is powered up.

Condition: like new (used), Year of construction: 2015, functionality: fully functional, turning diameter over cross slide: 160 mm, spindle bore: 43 mm, turning diameter: 330 mm, center height: 165 mm, center width: 750 mm, turning length: 750 mm, quill stroke: 110 mm, total length: 1,800 mm, total width: 1,200 mm, total height: 1,650 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 1 rpm, overall weight: 1,250 kg, Conventional precision lathe, control WEILER C3/Sinumerik 840D, center high 165 mm, between centers 750 mm, bore Ø 43 mm, speed 1 - 4500 rpm stepless, motor 9 kw, equipement: collet device, coolant device, 3-jaws chuck SCHUNK, drill chuck, tool post MULTIFIX with 6 toolholders, lamp, dimensions 180x120x165 cm, weight ca. 1250 kgs; only a few working hours Pedpfsz Rpmqox Akijrc

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, Weiler Praktikant 140 B Lead and Feed Screw Lathe with Toolroom Accuracy featuring NEW K&C 3-Axis Digital Readout! Technical Data: - Year of construction: 1989 Machine No.: 89-140-1471 - Centre height: 140 mm - Centre distance: 650 mm - Spindle speeds: from 24 to 2500 rpm - Spindle bore: 40 mm - Short taper spindle nose DIN 55027 size 5 with bayonet lock - Tailstock MK 3 - Feeds: from 0.02 to 0.63 mm/rev - Thread cutting: Metric, Imperial (inch), Module and Diametral Pitch threads possible - Metric thread pitches: from 0.25 to 8 mm - Weight: approx. 680 kg - Spindle brake, selectable - Dimensions: Length 1.6 m, Height 1.25 m, Depth 0.7 m Accessories and Equipment: - NEW K&C 3-axis digital readout, 12 months manufacturer warranty and operating manual Functions: switch mm/inch, coordinate selection ABS/INC, display value halving, reference point, tool library for 200 tools, taper calculation, radius/diameter indication, quick zeroing, count direction switching Podpfx Aoymdymokisrc - NEW collet system with collets from 3 to 25 mm, 1 mm increments - Three-jaw chuck, 160 mm, with 1 set of jaws - Multifix size A with 2 tool holders - Face plate - Bed stop - Rear cover - Machine feet - Electronic spindle guard - Operating manual Safety features: Electronic spindle protection, lead and feed screw cover, 2 emergency stops, spindle brake, electronic change gear guard About the machine: For sale is a Weiler Praktikant 140 B lead and feed screw lathe in very good condition. This well-maintained lathe comes from a training workshop. All slides operate smoothly and evenly. Even at high spindle speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and allows the production of ground-like surface finishes. Take the opportunity to view and test this machine under power on site to verify its condition for yourself.

Condition: excellent (used), Year of construction: 1997, operating hours: 48,889 h, functionality: fully functional, center width: 1,000 mm, center height: 280 mm, spindle speed (max.): 2,500 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum height: 280 mm Distance between centers: 1000 mm Swinging diameter: 500 mm Diameter of rotation over bed: 570 mm Diameter of rotation over support: 340 mm Spindle speed max.: 2500 RPM Prjdpfxj Afxxbo Akijc MACHINE DETAILS Operating hours: 48,889 h EQUIPMENT Chuck

Condition: used, Year of construction: 2000, Weiler DA 180 / 1000 - Universal lathes - ACU-RITE position display - 3-jaw chuck, Ø 200 mm - Quick-change tool holder - Coolant system - Work area lighting - Chuck guard - Chip guard - Various tool holders and tools - Operating manual - Year of manufacture: 2000 Technical data Main spindle: - Spindle head according to DIN 55027: Size 6 - Spindle bore: 52 mm - Ø in front bearing: 83 mm - Internal taper: metric 57 - Number of speeds: 12 - Speed range: 33–1500 rpm Tailstock: - Diameter of tailstock spindle: 65 mm - Morse taper: Mk 4 - Lead of leadscrew: 6 mm - Turning tool cross-section: 20 × 20 mm Working ranges: Prodpfe Agnynjx Akiec - Swing over bed: 380 mm - Swing over cross slide: 185 mm - Travel of cross slide: 330 mm - Travel of top slide: 120 mm - Travel of tailstock spindle: 120 mm Feeds: - Longitudinal feeds: 0.072 – 4.038 mm/rev - Cross feeds: 0.036 – 2.019 mm/rev Threads: - Metric threads: 0.5 – 28 mm - Inch threads: 56 – 1 TPI - Module threads: 0.25 – 14 - D.P. threads: 112 – 2 Electrical connection: - Drive power: 5.5 kW - Motor rated speed: 1500 rpm Dimensions: - Center height above flat guideway: 180 mm - Center height above floor: 1060 mm - Bed width: 330 mm - Machine dimensions WxHxD: approx. 2400 x 1700 x 1200 mm - Machine weight: approx. 1800 kg

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, L & Z lathe / WEILER CONDOR AC / Stepless speed control / FROM AN EDUCATIONAL INSTITUTION - CE marking - Year of manufacture: 2000 - Swing over cross slide: 180 mm - Distance between centers: 165 mm - Max. swing: 330 mm - Turning length: approx. 800 mm - Speed (stepless): max. 2800 rpm - Automatic longitudinal / cross feeds - Threading / Metric / Inch etc. Pjdpsz Izi Dsfx Akierc - 3-jaw chuck - Tailstock - Chip guard - Machine light - Multifix base and 6 inserts - Various change gears - Coolant system - Various operating tools - Documentation Dimensions: L x W x H: 1.8 x 1 x 1.8 meters / Weight: 1300 kg Errors and omissions excepted.

Condition: ready for operation (used), functionality: fully functional, WEILER COMMODOR from vocational school / technical college - identification -Guides in good condition -Technical college identification -Good working condition -Maximum turning height 180mm -Maximum turning diameter 1000mm -Bar capacity 56mm -Speed range (gearbox) 56 - 2000 rpm -Automatic longitudinal / facing feeds -Threading / Metric / Inch, etc. -Tailstock MK4 -Three-jaw chuck approx. 200mm -ELECTRIC CHUCK GUARD -SPINDLE COVERS -2 x Emergency stop Prsdpfx Asz R Dn Ajkisc -Multifix base and inserts -Coolant system -Chip guard -Work light -Documentation Dimensions: L x W x H 2.5 x 1.3 x 1.7 meters / Weight 1500kg Errors and omissions excepted.

Condition: ready for operation (used), functionality: fully functional, L&Z Lathe WEILER LZ 330 incl. new 3-axis digital display (from an educational institution) -3-axis digital display "NEW" -Center height 165mm -Swinging diameter over bed 330mm -Turning length 800mm -Spindle speed range (geared) 25 - 2800 rpm -Automatic longitudinal / cross feeds -New Multifix base and inserts -Collet chuck and various collets -3-jaw chuck -Original copying attachment -Various accessories -Documentation Dimensions: L x W x H 1.8 x 0.7 x 1.6 meters / Weight 800kg Pedpfx Akez Ihvkoiorc Errors and omissions excepted.

Condition: like new (used), Year of construction: 2021, operating hours: 4,504 h, functionality: fully functional, turning length: 525 mm, turning diameter: 240 mm, spindle bore: 42 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 5 rpm, travel distance X-axis: 207 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 525 mm, spindle motor power: 22,000 W, total height: 2,200 mm, total length: 3,200 mm, total width: 2,200 mm, type of input current: three-phase, overall weight: 6,500 kg, Equipment: documentation/manual, type plate available, Weiler DZ45 CNC lathe with Siemens control For sale is a high-precision, universal CNC machining center from the quality brand Weiler, model DZ45, manufactured in 2021. The machine is in excellent, barely used condition, with only 4504 operating hours displayed. Equipped with a powerful Siemens Sinumerik 840D sl control and a total of 6 axes, this system offers maximum flexibility and efficiency for demanding metalworking operations. Additional images and videos will be provided upon request. Technical data at a glance: • Manufacturer: Weiler Prjdpovphv Tsfx Akioc • Model / Type: DZ45 CNC • Year of manufacture: 2021 • Operating hours: Only 4504 h • CNC control: Siemens Sinumerik 840D sl • Number of axes: 6 • Motor power: 22 kW • Spindle speed: 5 to 6,000 rpm • Main spindle mount: DIN ISO 702-1 size 5 (DIN 55026) • Condition: like new, fully functional • Location: Graz, Austria Travel distances & dimensions: • X-axis: 207 mm • Y-axis: 80 mm • Z-axis: 525 mm • Overall dimensions (L x W x H): 3,180 mm x 2,050 mm x 2,200 mm • Electrical connection: 400 V • Integrated coolant pump • Complete, original operating manual / documentation available Are you interested? An inspection can be arranged.

Condition: like new (used), functionality: fully functional, Weiler Praktikum 160B precision center lathe 3-axis digital display K&C NEW. Reconditioned with acceptance certificate for tolerances of new machines Technical data: Prodpevrdlcsfx Akijc >> Machine no. 87 160 760 >> Center height 160 mm >> Center width 650 mm >> Spindle speeds: from 24 to 2500 rpm >> Spindle passage 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock MK 3 >> Feed rates from 0.02 to 0.63 mm / rev >> Possible threads metric, inch, module and diametric pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight approx. 680 kg >> Spindle brake can be switched on >> Length 1.6 m, height 1.25 m, depth 0.7 m Accessories and equipment: >> 3-axis digital display from K&C New, 12-month manufacturer's guarantee with operating instructions Functions: Switching mm/inch, coordinate selection ABS/INC, halving the display value, reference mark, tool programming 200 pcs., cone calculation, radius / diameter, quick zeroing, switching the counting direction, >> Collet device New, collets NEW from 3 to 25 mm, 1 mm increasing >> Three-jaw chuck 160 mm New with 2 sets of jaws >> Mulifix size A with 3 steel holders >> Electronic spindle protection >> Machine lamp LED New >> Machine feet NEW >> Splash guard >> Operating instructions, spare parts plan (PDF) About the machine: Offered is a Weiler Praktikum 160 B guide and feed spindle lathe with toolmaker precision in a completely geometrically overhauled condition. Reconditioned with acceptance certificate for tolerances of a new machine. For safety: Electronic spindle protection of the work spindle, cover of the lead and feed spindle, 2 emergency stops and a brake motor. This new generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to view this machine on site under power and see for yourself its condition.

Condition: good (used), Year of construction: 1997, operating hours: 10,216 h, functionality: fully functional, turning diameter over cross slide: 200 mm, turning length: 300 mm, spindle bore: 32 mm, spindle speed (max.): 8,000 rpm, spindle speed (min.): 50 rpm, travel distance X-axis: 200 mm, travel distance Z-axis: 345 mm, spindle motor power: 11 W, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, rotational speed (min.): 50 rpm, rotational speed (max.): 8,000 rpm, feed length X-axis: 200 mm, feed length Z-axis: 300 mm, feed rate X-axis: 12 m/min, feed rate Z-axis: 12 m/min, type of input current: AC, torque: 73 Nm, swing diameter over bed slide: 445 mm, chuck outer diameter: 140 mm, spindle nose: DIN55026 Gr. 5, Equipment: documentation/manual, Due to restructuring measures, we are selling our Weiler DZ32 CNC lathe. - Year of manufacture: 1997 - Second owner (previously used in a training workshop) - Very good condition for its age - Very few operating hours - total running hours: 10,216 h - Siemens Sinumerik 820 (GA3) T control with C-axis - Max. turning diameter: 230 mm / max. turning length: 300 mm - Main spindle: 8,000 rpm Pjdozzcfpepfx Akisrc - Counter spindle: 5,000 rpm - 3-jaw hydraulic chuck Röhm 140 mm for main spindle - Additional collet chuck for main spindle - Collet chuck for counter spindle - Drive power: 11.5 kW - Sauter tool holder with 16 driven tools (max. 4,000 rpm) - Tool holder size: VDI 20 - Chip collection tray (hydraulic) - With substructure for height adjustment - Fully functional - Many tool holders available, also with drive; these can be purchased depending on the price. - Complete operating and programming documents (German) - Spare parts and service available from Weiler - Machine can be inspected in our workshop while powered on This offer is non-binding. Subject to prior sale. No online sales. The sale is only to commercial customers after an on-site inspection and acceptance. Due to the age of the machine, the sale is made without any warranty. Pick-up only (EXW) - no shipping.