Used Weima Wood Shredder for sale (80)

Condition: excellent (used), Year of construction: 1990, operating hours: 4,456 h, Wood shredder Manufacturer: Weima Type: WL 6 Year of manufacture: 1990 Hopper opening: 800 x 1,000 mm Power: 18.5 kW Screen diameter: 15 mm Rotor diameter: 368 mm Djdpfx Asz A Ed Ijcyewd Weight: approx. 1,500 kg

Condition: repair required (used), Year of construction: 2002, Hacker chipper requiring overhaul with a 1300 mm rotor width 45 kW motor approximately 50 knives, 40 x 40 mm, on the rotor Dwjdpfx Ao Ah T R Tecysd The chipper runs, but the gearbox wobbles on the rotor stub It is still possible to chip material, but it will need to be repaired at some point Large hopper on top, approximately 2.4 x 2.4 m

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Crusher manufactured by the German company WEIMA – after technical inspection – year of manufacture 1992 – documentation TECHNICAL SPECIFICATIONS: hopper dimensions 800 x 1000 mm rotor diameter 315 mm rotor length 800 mm rotor speed 90 rpm main motor 22 kW number of knives 19 pcs rotating cutting knives 30 mm x 30 mm screen size φ 20 mm and 15 mm AUTO-REVERSE Djdpfsuditwox Acyswd HYDRAULIC CHUTE height of the clamping chute 275 mm nozzle diameter φ 200 mm machine dimensions (length/width/height) 210 / 160 / 180 cm weight 1600 kg

Condition: refurbished (used), functionality: fully functional, overall weight: 1,300 kg, WEIMA WL 4 shredder, 18.5 kW Machine for shredding production waste from wood processing, furniture manufacturing, pallets, CLT, particleboard, rubber, and plastics. Mounted on vibration-damping legs. The machine is fully functional and has undergone the following repairs: 1. Bearings on the shaft have been replaced. Dedpfoz En Nrjx Acyswd 2. Complete gearbox service with replacement of 3 sets of bearings. 3. Slide rails of the hopper have been replaced. 4. New rotor knives and new stationary knives. 5. Hydraulic pump has been replaced. 6. New gearbox and hydraulic oils. 7. New hydraulic hoses. 8. New oil filter. 9. Sandblasting and painting of the entire machine. Technical data: POWER: 18.5 kW NUMBER OF SHAFTS: 1 SHAFT LENGTH (mm): 600 mm SHAFT DIAMETER (mm): 252 mm ROTATION SPEED: 90 rpm NUMBER OF KNIVES: 14 SCREEN SIZE: 15 mm MACHINE DIMENSIONS: 200 x 160 x 120 cm MATERIAL: Wood waste FEED OPENING DIMENSION (mm): 600 x 800 mm WEIGHT (kg): 1300 kg

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, overall weight: 1,400 kg, fuel type: electric, – year of manufacture: 1993 Dodpfx Asgxuvtecyowd – documentation TECHNICAL SPECIFICATIONS: – hopper dimensions: 800 x 1000 mm – rotor diameter: 175 mm – rotor length: 800 mm – rotor speed: 90 rpm – V-rotor – main motor: 18.5 kW – number of knives: 18 pcs – rotating cutting knives: 30 mm x 30 mm – screen: diameter 12 mm and 10 mm – AUTOREVERSE – HYDRAULIC DRAWER – height of the clamping drawer: 175 mm – nozzle diameter: diameter 200 mm – machine dimensions (length/width/height): 230 / 140 / 160 cm – weight: 1400 kg

Condition: excellent (used), Year of construction: 1995, I sell the vertical wood shredder Weima ZM30 Made in Germany Year 1995 Djdpfx Aoz Hqz Tocyswd Cylinder system with 4 sindles 2 Motors 11 + 11KW Only 1850 working hours Condition like new. Avialable immediately.

Condition: used, Year of construction: 1999, Used wood shredder Manufacturer: Weima Type: WL 4 Year of manufacture: 1999 Dwsdpfx Aezu Ap Ujcysd Technical data V - Rotor Motor 18.5 kW 400 V, 49 A, 90 rpm Feed opening 800x600 mm Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is non-binding.

Condition: used, Year of construction: 1994, functionality: fully functional, machine/vehicle number: 500/2089, Weima shredder, type: WL 6 Cutting shaft with round knives Motor power: 22 kW Including control cabinet Discharge screw up to the suction nozzle Machine is available immediately Handover in its current condition, as inspected, Dwjdpfe Ahykyex Acysd without warranty or guarantee.

Condition: used, functionality: fully functional, machine/vehicle number: 500-8866, overall weight: 15,000 kg, total length: 3,600 mm, total width: 3,020 mm, total height: 2,470 mm, input voltage: 400 V, number of blades: 63, rotational speed (max.): 68 rpm, rotor diameter: 600 mm, rotor length: 1,500 mm, rotor width: 1,500 mm, type of input current: three-phase, WEIMA single-shaft slow-speed shredder – industrial, 1500 mm rotor, 1500 × 1835 mm opening Djdpfoz D Sz Nex Acyswd For sale: used, single-shaft slow-speed shredder from the renowned WEIMA brand, designed for shredding a wide range of industrial waste – including hard plastics, film, big bags, wooden components, and furniture panels. This industrial-class machine, with its large rotor and wide inlet, guarantees high performance and the ability to process large-sized materials. 🔧 Technical specifications: Number of rotor knives: 63 Feed opening: 1500 × 1835 mm Rotor: length 1500 mm, diameter 600 mm, rotational speed 68 rpm Rotor type: reinforced V-rotor, screw-in knife holders Pressing system: pendulum type Hydraulic and electrical system: in working order 📦 Additional equipment: New, unused screens: 2 pieces (thickness 10 mm, size 708 × 1225 mm, mesh size Ø 40 mm) Set of mounting blocks + lower mounting strip for screens ⚠️ Condition: Used machine Rotor and knives need to be replaced or refurbished All other components are in working order

Condition: reconditioned (used), Year of construction: 1993, operating hours: 4,110 h, functionality: fully functional, power: 22 kW (29.91 HP), overall weight: 2,500 kg, Residual Wood Chipper / Wood Shredder / Slow-Speed Pusher Floor Grinder Refurbished WEIMA Model: WL10 Year of manufacture: 1993 Extraction diameter: 250 mm Motor power: 22 kW Rotor length: 98 cm Feed hopper approx. 120 x 100 cm Number of knives: 24 pcs. Knife dimensions: 30 x 30 mm Screen: 30 mm (includes second screen: 35 mm) Dimensions approx. 2.5 x 1.7 x 1.85 m Dwsdpey Ahr Hsfx Acyod Weight approx. 2,500 kg The machine has been refurbished: - Rotor shaft newly mounted - New paintwork - Pusher floor sliding rails replaced - Oil changed - Rotor shaft overhauled (partially new knives and holders, etc.) Condition as shown in images; please also refer to the item description. Collection by the buyer is possible. All dimensions are approximate. All information given to the best of our knowledge, but without guarantee. Subject to prior sale. Items can be collected by the buyer or shipped at the buyer's expense. Shipping costs are provided as a guideline; final costs may vary depending on distance and unloading options. The stated sales price is the net final amount, plus VAT. An invoice with VAT shown will be issued. Warranty basis: Due to wear and tear of used parts, the items are generally sold as defective – for spare parts only and to business buyers. By submitting a bid, the buyer accepts this as the basis of the sales contract. For used items, warranty period is 12 months if the buyer is a consumer within the meaning of §13 BGB. If the buyer is an entrepreneur within the meaning of §14 BGB, any warranty is excluded. For new items, warranty period is 24 months if the buyer is a consumer within the meaning of §13 BGB. If the buyer is an entrepreneur within the meaning of §14 BGB, the warranty period is 12 months.

Condition: excellent (used), functionality: fully functional, Good working condition washing line with Weima shredder WLK1500 and Rotajet dryer and 2 sink float tanks Dedpsz Azz Eefx Acyowd Output capacity 750kg p/h

Condition: ready for operation (used), Year of construction: 2007, Rotor: approx. 248 mm Feed opening: approx. 800 x 1000 mm Rotor length: approx. 800 mm Dwjdez Eqhkjpfx Acysd Motor: 18.5 kW Tools: 19 Technical data available upon request Space requirement: approx. 1300 x 2100 mm

Condition: new, Year of construction: 2026, Weima Hacker / Shredder WL 8 with Top Features - 2nd knife row, log spacer, 4-sided segment base, discharge auger with gear motor, Fast reverse hydraulics with shock valve The single-shaft shredder WL 8 is a proven classic for shredding wood waste of all kinds. It is used, for example, thousands of times in woodworking companies worldwide. The high number of these highly sought-after shredders guarantees proven and reliable technology at the best price-performance ratio. The machines are characterized by their very robust design, which ensures extremely high durability (even outdoors). Intuitive operation thanks to Siemens PLC control with touch display To ensure that the electronics are optimally adapted to the machine, we design, build and wire our control cabinets ourselves. We use only high-quality components – for example, from Siemens or Rittal. Intuitively operated touch surfaces guarantee quick adjustments. Functions such as adjusting the slide timing or stop ensure a high throughput. The built-in overload protection also prevents damage to the machine. No material bridging due to self-cutting hopper design The hopper performs several tasks at once. First, the material to be shredded is fed into it – manually, mechanically or via a conveyor belt. The generous opening also makes it easy to fill very large parts. However, its special design, which is rounded at the front and thus effectively prevents material bridging, is crucial for the shredding process. Even with bulky parts, the shredder cuts itself free. If required, both hopper extensions and lids with gas spring are available. Durable rotor bearings thanks to offset design A rotor bearing must be particularly robust due to its extreme stress during the shredding process. To prevent dust or foreign objects from entering it, we have separated it from the machine frame. This also makes it very easy to maintain and access. Rotor diameter (mm): 260 Rotor length (mm): 1000 Rotor speed (RPM): 80 - 125 Power (kW): 22 Number of knives: 54 Available knife sizes (mm): 40 x 40 Grain size (mm): 15/20 mm or according to customer requirements Suction nozzle (mm): 200 Feed opening (mm): 1000 x 1250 Length (mm): 2045 Width (mm): 1740 Dsdpfspdqzxsx Acyswd Height (mm): 1840 Weight (approx. kg): 2200 Accessories: - 2nd knife row - Log spacer - 4-sided segment base - Discharge auger with gear motor - Fast reverse hydraulics with shock valve - Screen size 15/20 mm List price: €52,320, sold at a special price Location: In stock at 54634 Bitburg - available immediately - The pictures show a machine without a discharge auger; one will be available in stock.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, total length: 4,500 mm, total width: 3,375 mm, WEIMA Crusher Series HWV 3000 (37 kW) and the Single-Shaft Shredder WL12 (30 kW) Ideal for pre-shredding wood waste such as pallets, followed by metal separation and secondary shredding. Advantages: Two-stage process: Pre- and post-shredding for maximum efficiency. Versatile use: Wood chips for heating systems or briquetting presses. Low-noise operation Technical details – HWV 3000: - Power: 37 kW - Dimensions (hopper): 3375 mm width x 1630 mm height - Cutting knives: 58 knives in two rows Technical details – WL12/30: - Power: 30 kW - Shaft diameter: 368 mm - Screen: 15/20 mm Applications - Wood waste processing and recycling - Energy generation through wood chips or briquetting Dwsdpfoy Ubvpsx Acyjd

Condition: used, Year of construction: 2025, New demonstration machine! List price €25,500 net. Machine concept WL 4 / 18.5 kW. The Weima high-performance shredders, with their flexible application options, can process all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer remnants, etc.) into wood chips, and achieve an enormous volume reduction of the material, especially with bulky materials. Operating principle: The machine is equipped with a large feed hopper and can be fed either via a conveyor belt or by hand. This hopper can be adapted to individual needs and guarantees a continuous and cost-effective material feed without the need for manual assistance. The hydraulically controlled slide feeds the wood waste to be shredded to the cutting area of the rotor and is automatically and load-dependent. The internal slide guides are made of highly abrasion-resistant plastic (polyamide) and can be adjusted. The hydraulic cylinders are suspended on universal joints to avoid transverse forces on the piston seals. The patented and profiled V-rotor made of solid steel has a diameter of 256 mm and operates with a rotor speed of 80 - 120 rpm. The concave, aggressive and 4-way rotatable knives/cutting inserts are located in milled knife pockets on special knife carriers. This patented system guarantees, through the resulting reduction of the cutting gap between the counter-knife and the rotor, a high throughput, low energy consumption and an optimal discharge of the shredded material. The screen attached under the rotor determines the chip size (10 - 100 mm). On request, a hydraulically opening screen basket is also available. The power transmission from the electric motors is via V-belts to a heavily dimensioned gearbox, which is attached to the rotor stub on one side. Equipment and technical data: Drive power 18.5 kWHopper opening with Logspacer: 600 x 1,050 mmHopper capacity: approx. 0.6 m³Working width of the rotor: 600 mmDiameter of the rotor: 252 mmRotor speed 60-100 rpmNumber of knives: 28Type and size of knives: concave / 40 x 40 mm, cutting insertsScreen size: 12/10 mmPainting: Weima Standard RAL 2002 / 7016Connection value: 400 V +/- 5% / 50 HzWeight approx. 1,300 kg including:Control cabinet with display and 5 m cableElectrical controlStar-delta startRubber vibration elementV-rotor (patented) with knife pockets milled into the profileGearbox limit switch2nd knife rowClamping bar on the slide Location: Dsdpszuf U Tjfx Acyewd

Condition: excellent (used), Year of construction: 2003, Wood chipper Manufacturer: Weima Type: WL 4 Year of manufacture: 2003 Operating hours: approx. 1,244 h Power: 18.5 kW Hopper: 600 x 800 mm Rotor diameter: 252 mm Dsdpfoz Ai N Rjx Acyjwd Screen diameter: 15 mm Number of knives: 14 Rotational speed: 90 rpm Weight: 1,300 kg

Condition: used, Year of construction: 1991, functionality: fully functional, overall weight: 1,400 kg, fuel type: electric, – year of manufacture: 1991 – made in Germany TECHNICAL SPECIFICATIONS: – hopper dimensions (length / width): 1800 x 1600 mm – rotor diameter: 200 mm – rotor length: 800 mm – main motor power: 15 kW – hydraulic pump motor power: 0.75 kW – number of knives: 18 pcs – rotating cutting knives with dimensions: 30 x 30 mm – screen: ø 12 and 17 mm – AUTO REVERSE – hydraulic drawer – height of hydraulic drawer: 175 mm – diameter of discharge outlet: 200 mm Dsdpe Afc Sbjfx Acyewd Machine dimensions: – length: 210 cm – width: 170 cm – height: 185 cm – weight: ~1400 kg

Condition: new, Year of construction: 2026, Weima Hacker/Shredder WL 8 with Top Equipment - Four-sided segment floor, discharge auger with geared motor, double blade row, log spacer, fast reverse hydraulics with shock valve The single-shaft shredder WL 8 is a proven classic for shredding wood waste of all kinds. It is used thousands of times in wood processing companies worldwide. The high number of these highly sought-after shredders guarantees a proven and reliable technology at the best price-performance ratio. The machines are characterized by their very robust design, which ensures extremely high durability (even outdoors). Intuitive operation thanks to Siemens PLC control with touch display To ensure that the electronics are optimally adapted to the machine, we design, build and wire our control cabinets ourselves. We use only high-quality components – for example, from Siemens or Rittal. Intuitively operated touch interfaces guarantee quick adjustments. Functions such as setting the slide timing or stop ensure a high throughput. The built-in overload protection also prevents damage to the machine. No material bridging thanks to self-cleaning hopper design Dsdpemhh Idjfx Acyswd The hopper performs several tasks. First, the material to be shredded is fed into it – manually, mechanically or via a conveyor belt. The generous opening also makes it easy to fill in very large parts. However, its special design, which is rounded at the front and thus effectively prevents material bridging, is decisive for the shredding process. Even with bulky parts, the shredder cuts itself free. If required, both hopper extensions and lids with gas springs are available. Durable rotor bearings thanks to offset design A rotor bearing must be particularly robust due to the extreme stress it is subjected to during the shredding process. To prevent dust or foreign matter from entering its interior, we have separated it from the machine frame. This also makes it very easy to maintain and access. Rotor diameter (mm): 260 Rotor length (mm): 1000 Rotor speed (RPM): 80 - 125 Power (kW): 22 Number of blades: 54 Available blade sizes (mm): 40 x 40 Particle size (mm): Suction nozzle (mm): 200 Feed opening (mm): 1000 x 1250 Length (mm): 2045 Width (mm): 1740 Height (mm): 1840 Weight (approx. kg): 2200 Screen size: 15/20 Accessories: - 2nd blade row - Log spacer - Four-sided segment floor - Discharge auger with geared motor - Fast reverse hydraulics with shock valve Location: Available in warehouse 54634 Bitburg

Condition: new, Year of construction: 2026, Weima Single-Rotor Shredder Type WL 6 Power: 18.5 kW Our WL 6 machine concept The Weima high-performance shredders, with their flexible application possibilities, can process all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer remnants, etc.) into fuel chips, and achieve an enormous volume reduction of the material, especially with bulky materials. Mode of operation: The machine is equipped with a large feed hopper and can be fed either by a conveyor belt or manually. This hopper can be adapted to individual needs and guarantees a continuous and cost-effective material feed without the need for manual assistance. Technical specifications WL 6 / 18.5 kW Hopper opening: 800 x 1,000 mm Hopper volume: 0.9 m³ Working width of the rotor: 800 mm Diameter of the rotor: 252 mm Drive power: 18.5 kW Rotor speed: 80 - 120 rpm Number of knives: 42 pieces Type and size of knives: concave / 40 x 40 mm, cutting reversible crowns Screen perforation: 10-60 mm possible (standard 15-20 mm) Paint: WEIMA standard RAL 2002 / 7016 Connection value: 400 V +/- 5% / 50 Hz Weight: approx. 1,600 kg Included: - Control cabinet (Rittal) including electrical control (Moeller / Siemens) and star-delta starter - Rubber vibration dampers - V-rotor (patented) with knife pockets milled into the profile Dwsdeh Eiw Iepfx Acyed - Gearbox limit switch - Pressure bar - Very robust Weima WAP gearbox - Logspacer (self-clearing hopper) - 2nd knife row Available from stock in 54634 Bitburg - immediately available - Request more information

Condition: new, Year of construction: 2026, Weima Single-Rotor Shredder Type WL 6 Power: 18.5 kW Our WL 6 Machine Concept The Weima high-performance shredders, with their flexible application options, can process all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer remnants, etc.) into fuel chips, achieving an enormous volume reduction of the material, especially with bulky materials. Operating principle: The machine is equipped with a large feed hopper and can be fed by means of a conveyor belt or manually. This hopper can be adapted to individual needs and guarantees a continuous and cost-effective material feed without the need for manual assistance. Technical Specifications WL 6 / 18.5 kW Hopper opening: 800 x 1,000 mm Hopper capacity: 0.9 m³ Working width of the rotor: 800 mm Diameter of the rotor: 252 mm Drive power: 18.5 kW Rotor speed: 80 - 120 rpm Number of knives: 42 pieces Type and size of knives: concave / 40 x 40 mm, cutting reversible edges Screen size: 10-60 mm possible (standard 15-20 mm) Paint: WEIMA standard RAL 2002 / 7016 Connection value: 400 V +/- 5% / 50 Hz Dwsdpfjh Hnp Djx Acyod Weight: approx. 1,600 kg Included: - Control cabinet (Rittal) incl. electrical control (Moeller / Siemens) and star-delta starter - Rubber vibration dampers - V-rotor (patented) with knife pockets milled into the profile - Gearbox end switch - Pressing bar - Very robust Weima WAP gearbox - Log spacer (self-cleaning hopper) - 2nd knife row Available from stock in 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2014, WEIMA WLK 800 – 30 kW – Single-Shaft Shredder – 2014 For sale: professional WEIMA WLK 800 single-shaft shredder, manufactured by the well-known German company WEIMA Maschinenbau GmbH. The machine is designed for shredding various types of materials and industrial waste. The WLK series features a robust, heavy-duty construction designed for continuous operation in recycling and manufacturing facilities. Technical specifications: • Manufacturer: WEIMA Maschinenbau GmbH, Germany • Model: WLK 800 • Year of manufacture: 09/2014 • Serial number: 510-1282 • Rotor width: 800 mm • Motor power: 30 kW • Voltage: 400 V • Frequency: 50 Hz • Rated current: 70 A • Rotor speed: 90 rpm • Machine weight: approx. 2.8 t Dwjdpfx Acozv Tq Esyjd • CE marked Applications The WEIMA WLK 800 can be used for shredding, among other materials: • plastics, • PE, PP, HDPE and LDPE materials, • plastic pipes and profiles, • production waste, • wood and wood-based materials, • packaging, • containers and crates, • other industrial waste suitable for single-shaft shredding.

Condition: good (used), Shredding machine Rotor approx. 250 mm Hydraulic slide Feed opening approx. 600 x 800 mm Dedpsz Ea Tpofx Acyowd Rotor length approx. 600 mm Motor 18.5 kW Functionality tested Technical data available upon request.

Condition: excellent (used), Weima WL6 wood chipper 18.5kW engine rotor length 800mm, Dwjdezkqnqepfx Acysd 21 knives on the rotor, hydraulic hopper, automatic reverse function 15mm screen at the bottom and 20mm screen at the top Machine has undergone inspection, in very good condition Weight approximately 1500kg

Condition: excellent (used), CATALOGUE NUMBER 6114 TECHNICAL DATA - Inlet of the loading hopper: 800x1000mm - Working width of the rotor: 800mm - Pump motor: 0.75kW - Main motor: 15kW - Number of knives: 21 pcs - Dimensions of knives: 30x30mm - Screen: 0.8x10mm - Pressing drawer - Electric auto-reverse - Discharge augers: 2 x 1.1kW - Dimensions (L/W/H): 2460x1800x2250mm - Weight: 1660kg - Made in Germany - Auto-reverse Dwodpeztaulefx Acyjd - Pressing drawer - Unpainted - Very good condition - Used shredder Net price: 59,900 PLN Net price: 13,930 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary with significant exchange rate fluctuations)

Condition: good (used), functionality: fully functional, Important note: The machine is currently still located at the customer's site – available at the beginning of 2027. Robust WEIMA ZM 30 twin-shaft shredder for shredding wood waste, offcuts, and similar materials. The machine features two slow-running shredding shafts and a generously sized feed hopper. Due to its low speed and robust design, the machine is well-suited for use in carpentry workshops, joineries, and wood processing companies. Technical data Manufacturer: WEIMA Maschinenbau GmbH Type: ZM 30 Year of manufacture: 10/2002 Machine no.: 900-789 Motor power: 2 × 11 kW Total motor power: 22 kW Djdpfx Ajzxrxgecyowd Voltage: 400 V Frequency: 50 Hz Current consumption: 55 A Speed: 25 rpm Cutting width: approx. 460 mm Screen hole size: Ø 20 mm Hopper opening: approx. 600 × 1,240 mm Dimensions: approx. 1,490 × 1,290 × 1,970 mm Weight: approx. 1,300 kg Operating hours: approx. 4,188 hours according to the operating hour meter Equipment Twin-shaft cutting system 2 separate drive motors, each with 11 kW Large feed hopper Screen with Ø 20 mm holes Emergency stop Control cabinet / electrical control The machine can be inspected and tested under power by appointment. Transport is possible for an extra charge! Note The machine will be inspected before sale. For used machines manufactured in 2009 or earlier, the warranty will be excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale, and changes are subject to change. All information is without guarantee.