Used Weiler Lz 220 for sale (181)

Condition: used, L + Z Lathe WEILER Type LZ PRIMUS GS Machine no. No. 2461 Year of construction approx. 1990 Center width 400 mm Turning diameter over bed 250 mm Center height above bed 125 mm Turning diameter over support 140 mm Center height above support 70 mm Spindle bore 24 mm Spindle speed 60 - 3000 rpm 18 steps Feed lengthwise and flat Chuck flange short taper DIN 55022 size 4 Inner tailstock taper MK 2 Drive power 1.1 kW and 1.5 kW pole-changing Mains connection 380 Volt, 50 Hz - 3-axis digital readout FAGOR, type 30i-T-B - Spindle speed via 2 motor speeds and 9 gear stages - 3-jaw lathe chuck RÖHM Ø 125 mm with stepped jaws - MULTIFIX quick-change tool holder with 1 interchangeable cassette - Set of collets Ø 1 / 3 / 4 / 5 / 7 / 8 / 10 / 14 / 15 / 16 / 17 / 19 / 20 / mm Rodpfx Abjrtd Uwodsn - 1 centering tip for collet chuck holder - Emergency stop - Hinged chuck guard - Splash guard - Machine light - electrical diagram - Machine mounted on a steel plate (steel plate L x W x H 1200 x 500 x 30 mm, 140 kg) Space requirement L x W x H 1200 x 900 x 1560 mm Weight 520 kg good condition

Condition: used, machine/vehicle number: 11756, second-hand WEILER LZ 280 sliding headstock and sliding headstock lathe center height 125mm center width: 800mm spindle speed approx. 26-2000 rpm 1 x three-jaw lathe chuck Ø 125mm with inner and outer jaws, brand new Multifix size A with 2 interchangeable holders Emergency stop/switch unit, rear chip guard, all change wheels present, drive disk, Redpevd Dbnefx Abdon storage tray, machine light, new socket, 15 collets from Ø 3.5 - 18.5 mm, collet clamping tube, fixed point and MK 2 sleeve for clamping tube, bed stop, chuck protection cover, various turning tools and operating instructions. The machine is located at our premises in 71334 Waiblingen-Beinstein and is available immediately. A viewing of the machine is possible by arrangement.

Condition: good (used), Centre distance: 450 mm Centre height: 120 mm Rjdpfx Aow I A Uxjbdjn Spindle bore: 23 mm Speed: 40 – 3000 rpm Infinitely variable drive with 3 gearbox stages and digital speed display Tailstock: MT 2 Drive power: 1.5 kW Weight: 350 kg Dimensions: 1200 x 650 x 1330 mm Paint: Reseda green RAL 6011 Digital display: Optional at extra cost Accessories: Further accessories available on request

Condition: good (used), Year of construction: 1972, turning diameter over bed 330 mm turning diameter over slide rest 200 mm turning length 800 mm total power requirement 3 kW weight of the machine ca. 800 kg Rodpjwwl Izjfx Abdon dimensions of the machine ca. 1,9x0,7x1,2 m turning speed range 24-2800 U/min

Condition: good (used), WEILER LZ 330 / From Educational Facility - Swing over bed: 330 mm - Swing over cross slide: 165 mm - Turning length: 800 mm - Speed range / gearbox: 25-2800 rpm - Automatic longitudinal / face feeds Redpsxf Uf Nsfx Abdsn - Spindle bore: 38 mm - 3-jaw chuck - Collet chuck system incl. 20 collets - Multifix incl. 3 tool holders - Copying device - Various accessories - Documentation Dimensions: LxWxH 1.8x0.7x1.6 meters / Weight: 750 kg Errors and omissions excepted

Condition: good (used), Weiler E70 Hollow Spindle CNC Lathe Year: 2003 Distance Between Centres: 2000mm Spindle Bore: 8" (200mm) Machine with: Front & Rear chucks Tailstock Rodpfswmqkysx Abdjn Fixed Steady

Condition: excellent (used), Year of construction: 2020, Travelling steady rest for Weiler E 50, year 2020. In very good condition. Clamping range: 12 - 125 mm. Rsdpfx Aeyfnwmebdon

Condition: repair required (used), Year of construction: 1990, LZ-Lathe Fabr.WEILER Type : COMMODOR Year 1990 with 3 axes digital readout Heidenhain, Multifix holder B, steady rest, machine documentation Machine is defective ( clutch ) Rjdpsq Hd Ipefx Abdjn Center height: 214 mm turning diameter over face support : 200 mm Center distance : 1000 mm spindle bore : 60 mm Spindle speeds : 45 - 2000 rpm Machine is sold at a fixed price.

Condition: excellent (used), Year of construction: 2020, Fixed steady rest for WEILER E 50 lathe Rodpfx Abetx Avksdjn in very good condition. Clamping range : 10 -150 mm.

Condition: used, Year of construction: 1997, - Year: 1997 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 270 - Drive system: Teach-in - Centre height [mm]: 210 - Swing over bed [mm]: 420 - Distance between centres [mm]: 900 - Spindle bore [mm]: 55 - Min. spindle speed [rpm]: 4 - Max. spindle speed [rpm]: 3000 - Options: Digital readout - Type of digital readout: Weiler - Control: CNC Rjdpfxownh I Sj Abdsn Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), functionality: fully functional, center height: 140 mm, spindle bore: 36 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 42 rpm, total height: 1,600 mm, total length: 1,800 mm, total width: 700 mm, 3 Phase 380V, 2 speed motor is running fine. Geared headstock, gears running in oil bath! 16 spindle speeds adjustable from 42 up to 2000 RPM. Power feed in both longitudinal and cross directions. Thread cutting possible. Heidenhain 2-axis DRO (digital readout). Tripo A quick change tool post. Röhm 160mm 3-jaw chuck. MT3 tailstock taper. Made in Germany. Distance between centers: 850mm Center height: 140mm Spindle bore: 36mm Overall dimensions: 180x70x160cm Includes all accessories as shown in pictures. Redjyditaspfx Abdsn Contact us for shipping options! € 4,250.00

Condition: like new (used), Year of construction: 2013, functionality: fully functional, Weiler Praktikant VCD Precision Lathe Rjdpjx I Rtkjfx Abdjn Manufacturer: Weiler Model: Praktikant VCD Precision Lathe Year of manufacture: 2013 Condition: used, very good, as-new condition, no signs of wear, incl. new servicing and measurement protocol prior to sale Centre distance: 650 mm Centre height: 160 mm Swing diameter over bed: 320 mm Swing diameter over cross slide: 190 mm Cross slide travel: 150 mm Top slide travel: 110 mm Top slide swivel range: +/-65° Bed slide guide length: 350 mm Bed width: 205 mm Turning tool cross-section (height x width): 20 x 20 mm Height from top slide to centre: 30 mm Spindle nose according to ISO DIN 702-3 (DIN55027) size 5 Spindle diameter at front bearing: 70 mm Spindle bore: 43 mm Main spindle taper metric 50 Drive power: 6 kW Speed range: 30 – 4000 rpm Number of gear stages: 1 Number of speed ranges: stepless Number of feeds: 24 Longitudinal feed: 0.02 – 0.63 mm/rev Facing feed: 0.006 – 0.2 mm/rev Quill diameter: 40 mm Quill travel: 85 mm Quill taper: 3 Morse taper Weight, without packing and accessories, approx. 1150 kg Length / Width / Height, net: 1720 x 890 x 1700 mm Headstock / rear wall / sliding safety cover: Light grey RAL 7035 Machine base / machine bed: Basalt grey RAL 7012 Screen display housing: Blue NCSS 4550-R80B

Condition: ready for operation (used), Year of construction: 2009, spindle speed (max.): 2,500 rpm, total height: 1,785 mm, overall weight: 3,850 kg, number of axes: 2, This Weiler E50 was manufactured in 2009. A robust horizontal turning machine featuring a swing diameter over bed of 570 mm and a spindle bore of 83 mm. It offers a bed width of 350 mm and a turning tool cross-section of 32 x 25 mm. Ideal for precise and efficient turning operations. Contact us for more information about this machine. Machine Benefits Qualitative Machine Benefits • Spindle diameter in the front bearing: 120 mm • Spindle bore: 83 mm • Inner taper of the main spindle: metric 90 • Feed range longitudinal and planar: 0-20 mm/rev • Feed force longitudinal: 10000 n • Feed force planar: 7000 n • Input speed longitudinal/planar: 10/7 m/min or 5/3. 5 m/min • Metric threads: 0. 1-400 mm • Inch threads: 1/4" - 56 g/1" • Module threads: Technical Machine Benefits • Drive power (60% / 100% ed): 20/17 kw • Max. Torque at the turning spindle: 1600 nm • Gear stage i: 1-625 min-¹ • Gear stage ii: 4-2500 min-¹ • Bed width: 350 mm • Quill diameter: 80 mm • Quill stroke: 200 mm • Inner taper of the quill: mk 5 • Turning tool cross-section (height/width): 32 x 25 mm Rjdpfxox D Ibbj Abdsn • Spindle head according to din 55027: size 8 Extra Information Machine still under power/ DP threads: 1 - 224/ Fixed steady rest clamping range: 12-150 mm / 120-270 mm/ Moving steady rest clamping range: 12- mm/ The machine has been working effectively in 1-shift operation since it was purchased/ The chuck incl. hard & several sets of soft jaws and the tailstock can be supplied as accessories/ Any associated tools could be discussed in the event of an order/ The footprint of the machine is 2.8m x 5.2m, the 2.8m already includes 600mm as a workstation/ All manuals are available. Dimensions Machine Depth 3250 mm

Condition: excellent (used), Weiler Primus VC Precision Centre Lathe Equipped with 3-axis HEIDENHAIN digital readout (latest generation) With VC drive for stepless speed adjustment and CE-compliant, in virtually as-new geometric condition Technical Data: Year of manufacture: 1999 Machine No. 208 Centre height: 140 mm Centre distance: 500 mm Swing over bed: 280 mm Swing over cross slide: 135 mm Spindle speeds: up to 4,000 rpm, stepless Rodpfx Asyglk Hebdon Main drive: approx. 4 kW Spindle bore: 40 mm Short taper spindle nose DIN 55027 size 5 with bayonet locking Tailstock: MT 3 Quill stroke: 40 mm Longitudinal feed: 0.02 to 0.63 mm/rev Cross feed: 0.005 to 0.2 mm/rev Metric thread pitches: 0.25 to 8 mm Module pitches: 0.2 – 4 mm (19 pitches) Weight: approx. 800 kg Machine dimensions (W x D x H): 1.4 m x 0.935 m x 1.55 m Accessories and Equipment: - 3-Axis HEIDENHAIN digital readout (latest generation) - Display for spindle speed - 140 mm 3-jaw chuck with reversible jaws - Multifix quick-change tool post, size “A” - Electrically interlocked safety chip guard - Covered leadscrew and feed shaft - Lockable tool compartment - Rear splash guard - Simple bed stop - Switchable spindle brake - Operating manual - Machine lamp The machine comes from a vocational school and is in exceptionally top condition. Thanks to its safety features and renowned WEILER precision, this lathe is ideal for training as well as tool and machine construction. Note to all private buyers: The price of the machine is well into the five-digit range.

Condition: excellent (used), Year of construction: 1997, Cycle lathe Weiler E 50/1, 1997 Technical data: Immediately available from university: Cycle lathe WEILER Model: E 50/1 Year of manufacture: 1997 Centre height: 280 mm Centre distance: 1000 mm Swing diameter: 500 mm Turning diameter over bed: 570 mm Rsdpfxeydlhms Abdjn Turning diameter over cross-slide: 340 mm Spindle speeds: 0 – 2500 rpm Chuck

Condition: used, turning diameter over bed 370 mm turning diameter over slide rest 200 mm turning length 1000 mm centre height 185 mm Rjdpfx Aexfwckobdon spindle bore 56 mm tailstock quill taper MT 4 turning speeds 50 - 2000 U/min power capacity 4,0 kW weight of the machine ca. 1,4 t dimensions of the machine ca. 2,3 x 1,1 x 1,3 m Center lathe 200mm three-jaw chuck Size B Multifix tool post 3 Multifix tool holders Emergency stop device

Condition: used, turning diameter over bed / mm Redswgi Tmjpfx Abden turning diameter over slide rest / mm turning length / mm

Condition: excellent (used), Year of construction: 2001, Length:1200mm Width:800mm Height:1200mm Weight:290kg Rsdpsx Tp Dxefx Abdjn

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Weiler Praktikant VC Plus Precision Lead and Feed Screw Lathe with 3-Axis Digital Readout, Infinitely Variable Speed, Excellent Condition Technical Data: >> Year of manufacture: 2014, Machine no. JD12 >> Centre height: 160 mm >> Swing over bed: 320 mm >> Swing over cross slide: 190 mm >> Distance between centres: 650 mm >> Spindle speeds: 30 – 4000 rpm (infinitely variable) >> Spindle bore: 43 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: MT 3 >> Infinitely variable feed adjustment during operation via potentiometer (override) >> Input of feed rates and thread pitches >> Longitudinal feeds from 0.1 to 6 mm/rev >> Cross feeds from 0.003 to 2 mm/rev >> Thread cutting possible: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.1 to 20 mm >> Weight approx. 1,400 kg >> Spindle brake >> Dimensions: approx. 1.72 m (L), 1.7 m (H), 0.89 m (D) Accessories and Features: >> Weiler digital readout >> Collet chuck (new), collet set NEW from 3 to 26 mm >> 160 mm 3-jaw chuck with 1 set of jaws >> 160 mm 4-jaw chuck with 2 sets of jaws >> Multifix size B quick change toolpost with 3 tool holders >> 1 bed stop >> Splash guard >> Coolant system >> Machine lamp >> Operating manual, spare parts diagram Safety Features: >> Lockable main switch Rodpsydczdefx Abdjn >> Emergency stop button >> Electrically monitored chuck guard >> Automatic disengagement of the respective handwheel when feed is engaged VCplus Digital Readout: >> 8 inch color display >> 3 axes for bed, cross, and compound slides >> 99-tool memory >> Spindle orientation stop >> Input of either constant speed or cutting speed >> Feed and threading settings are displayed >> Thread cutting with electronic stop About the machine: Offered here is a Weiler Praktikant VC Plus precision lead and feed screw lathe with 3-axis digital readout. Year of manufacture 2014, in very good condition with original paint. The machine is, of course, fully functional and equipped with new collets and chucks. Take the opportunity to inspect the machine under power at our premises and see its condition for yourself.

Condition: good (used), Please read the technical specifications thoroughly. If you are considering the machine as an investment, we kindly ask that you provide full identification with a valid telephone number and email address when requesting a quotation. WEILER Precision Lathe MADADOR with HEIDENHAIN 3-axis digital readout Year of manufacture: approx. 1980, retrofitted with emergency stop and electrically interlocked chuck guard. Centre height: 145 mm Centre distance: 500 mm Swing over cross slide: 160 mm Spindle nose: DIN 55022 Gr. 5 Spindle bore: 36 mm Speed range: 30 – 3,000 rpm Motor power: approx. 3.0 kW Rodpfsxx S Hdsx Abdsn Tailstock quill: MT 3 Quill stroke: 90 mm Weight: approx. 620 kg Dimensions (LxWxH): 1420 x 700 x 1200 mm Technical data subject to confirmation! Robust lead and feed screw lathe suitable for workshops and professional hobbyists. Condition: Good Equipment: - 3-axis precision digital readout HEIDENHAIN - Lever quick-action collet chuck - Electrically interlocked chuck guard - Multifix toolpost head size A - 3-jaw chuck - Coolant system - Machine feet - Chip guard at rear - Machine lamp - Bed stop - Emergency stop button - Lockable tool compartment - Automatic feeds for longitudinal and cross slide Safety features: - Electrically interlocked chuck guard - Emergency stop button - Brake motor Available from March 2026

Condition: excellent (used), turning diameter over bed 260 mm Redsycxk Sspfx Abdon spindle passage 28 mm turning length 300 mm centre height 130 mm turning speeds 125 - 2800 U/min total power requirement 3 kW weight of the machine ca. 0,8 t dimensions of the machine ca. 1,4 x 0,6 x 1,4 m

Condition: used, Year of construction: 2009, Technical details: turning diameter: 800 mm turning length: 4500 mm control: 840-3 Circulation diameter via slide valve: 510 mm Shift of the planing slide: 410 mm bed width: 480 mm spindle head: DIN 55027 Gr. 11 spindle bore: 106 mm speeds:: 1-1800 1/min diameter of quill: 115 mm Inner cone of the quill: MK 6 Redpsyb R Exofx Abdon quill stroke: 225 mm total power requirement: 37/30 kW dimensions of the machine ca.: 6500 x 2500 x 1950 mm weight of the machine ca.: 8000 kg Equipped as follows: - 3-jaw chuck - 700 mm steel faceplate - Drill stand - PARAT tool post - Chip conveyor - Dust extraction - Heavy-duty coolant pump - Spindle brake

Condition: used, Year of construction: 1999, Max. Turning length 6.020 mm Rodjydqqyjpfx Abdon centre height 550 mm centre distance 6.000 mm max. swing over bed 1.100 mm max. swing over facing slide 730 mm max. workpiece weight 6.000 kg Spindle diameter in forward position 178 mm faceplate diameter 1.000 mm spindle bore 128 mm tailstock quill taper MT 6 diameter of quill 140 mm max. chucking diameter 500 mm control WEILER Lathe - cycle-controlled | WEILER - E110 x 6.000 equipped with a PARAT tool system as well as a chip conveyor. A comprehensive tool package, including several steady rests and a heavy-duty boring bar holder, is included in the scope of delivery. The machine video from the production plant will be shared on request. The machine is in good condition and can be inspected under power at any time in the Swiss factory location. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: E-110 | E 110 | E110 x 6000 | E110x6000 | E 110 x 6.000

Condition: ready for operation (used), Year of construction: 1990, operating hours: 51,392 h, total height: 1,700 mm, overall weight: 1,300 kg, This Weiler E30 was manufactured in 1990. A robust horizontal turning machine featuring a spindle bore of 42mm and a swing diameter over bed of 330mm. It supports a wide range of thread cutting, from metric to DP thread, and includes a Multifix holder B. Ideal for detailed and versatile turning operations. Contact us for more information about this machine. Additional equipment • Multifix holder B mounted • Fixed steady rest (option) clamping range: 15-100 mm • Moving steady rest (option) clamping range: 10-85 mm • Collets ranging from 3- mm (increments of 0.5 mm) • Tailstock with an MK3 chuck Machine Benefits Technical Machine Benefits • Drive power 100% / 60% ed: 9/11 kw • Max. Torque on the turning spindle: 180 nm • Total speed range: 1-4500 min⁻¹ Rsdpfxjyaimfo Abdon • Feed drive: three-phase ac feed drives • Feed range longitudinal: 0-20 mm/rev • Ellganggeschwindghell longitudinal/plan: 10/7. 5/5/3. 5 m/min • Quill diameter: 50 mm • Quill stroke: 110 mm • Inner taper of quill: mk 3 Extra Information Swing diameter over facing slide: 160 mm Bed width: 240 mm Sliding movement of the facing slide: 180 mm Bed slide guide length: 395 mm Turning tool cross-section (height/width): 20 x 20 mm Spindle head according to DIN 55027 Gr. 5 Spindle diameter in the front bearing: 70 mm Inner taper of the main spindle: Mk 5 Workpiece Metric thread range: 0.1 - 400 mm Inch thread range: G/1" 1/4 - 56 Module thread range: mm DP thread range: 1-224 G/" Number of threads max.: 50 Dimensions Machine Depth 1800 mm

Condition: good (used), Year of construction: 1988, 1 used lead and feed screw lathe Make: Weiler Model: 160 B Year of manufacture: 1988 Redpsw Sdr Hjfx Abdsn Technical specifications Centre distance: 650 mm Swing over bed: 320 mm Swing over cross slide: 192 mm Centre height: 160 mm Spindle bore: 40 mm Rated power: 2.4 / 3 kW Spindle speeds: 48 – 2500 rpm Dimensions: approx. L 2.20 x W 1.10 x H 1.40 m Weight: approx. 1 t Equipment Heidenhain digital readout Multifix toolholder with various inserts 3-jaw chuck Emergency stop