Used Washing Chamber for sale (3,318)

Condition: used, mileage: 16,000 km, Year of construction: 2023, Serial number: YS2P6X2000569xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21031 Chassis: Scania P320 6x2*4 (steerable tag axle) Engine: 320 hp, 9,000 ccm, 6-cylinder, Euro 6 Cab type: CP14L Wheelbase: 3,550 mm Allison GA866 automatic transmission Air suspension front and rear Black leather seats Scania Infotainment Premium Gearbox and engine PTO Body: Terberg Viking Dual-Chamber Total volume: 17.2 m³ Left chamber: 11.2 m³ Right chamber: 6 m³ Fully automatic bin lifter Prepared for dynamic weighing and RFID on chamber Control panels on both sides (rear) Pick-up function for bins Compatible with: 140–1000 L bins on wide side 140–360 L bins on narrow side (can be equipped for 660 L or split bins) Can empty split bins 2 LED rotating warning lights (rear, with guards) LED tail lights Cycle time: 2-wheel bins: max 8 sec 4-wheel bins: 12–15 sec Hydraulically operated tailgate Auto lift of seal strip during reversing or speeds > 7 km/h Auto-retractable step with handhold (right side) Integrated underrun protection Separate hydraulic systems for each chamber Color: White Crsdjw Ia D Ropfx Afloh Includes broom and shovel Km: 16000 HK: 319 Technical approved: Yes EU-approved until: 20.12.2025 Own weight: 18100 Total Weight: 27000 Payload: 8825 Width: 253 Length: 948 Model: P320 Gearbox: Automatic

Year of construction: 2024, condition: like new (used), functionality: fully functional, For sale is a washing and sorting line for pumpkins from the manufacturer Burg Machinery with a capacity of 3-4 tons/hour. Includes dipping tank, polishing unit, roller dryer, and sorting. Codjw Trldjpfx Aflorh

Condition: excellent (used), Espec Type: PSL-4KPH Espec Temperature and Climate Test Chamber, Air-Cooled There is a small dent at the top edge of the door (see photo). The door closes perfectly, the seal is intact, and the climate chamber operates without any technical faults. The dent is purely cosmetic and does not affect function, sealing, or control accuracy in any way. Temperature range: -70°C to +150°C Humidity range: 20 to 98% relative humidity Temperature/Humidity fluctuations: ±0.3°C / ±2.5% r.H. Temperature/Humidity stability: ±0.5°C / ±3% r.H. Heating/Cooling rates and times: - Heating time: within 30 min from +20 → +100 °C - Cooling time: within 115 min from +20 → –40 °C Crjdpfx Afswz Er Uoleh - Heating rate: 3.0 °C/min - Cooling rate: 1.0 °C/min Test chamber dimensions: Width 1000 mm x Height 1000 mm x Depth 800 mm External dimensions: Width 1410 mm x Height 1983 mm x Depth 1593 mm Port with silicone plug: 100 mm equipped with RS232 interface Test chamber volume: 800 liters Refrigerants: R-404A, R-508A Stainless steel construction, AC 400 V 3φ, 50Hz 31 A Net weight approx. 720 kg For your safety as a buyer, the following measures are performed in advance on our offered chambers: 1. Functional testing and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. Upon successful inspection, the chambers undergo a test run monitored with calibrated devices. Condition: used Scope of delivery: (see photo) (Subject to change and error in technical data and specifications!) We are happy to answer further questions by phone.

Condition: like new (used), Year of construction: 2025, operating hours: 98 h, Binder Chamber KBF 130 with lockable doors. Ex-demonstration chamber with only 98 operating hours, like new. Model KBF 130 | Climate chambers for stability testing with a wide temperature and humidity range Advantages: - Safe for critical stability tests according to ICH standards thanks to maximum climate uniformity, even when the unit is fully loaded - Reliable: failure-free, long-term operation due to proven compressor technology and stainless steel interior - Intelligent: illuminated status indicator triangle and ergonomic control panel featuring a programmable touchscreen interface - Economical: up to 40% lower energy consumption compared to the previous model thanks to modern inverter cooling technology PRODUCT DESCRIPTION: A proven specialist for reliable ICH stability tests in the pharmaceutical industry: The KBF handles all long-term, accelerated, and stress condition tests. It meets all key ICH requirements, from high precision to advanced programming and documentation. Offers flexible water supply configurations for all installation sites. Additionally, the new KBF consumes up to 40% less energy than its predecessor. KEY FEATURES: - Temperature range: 0°C to 70°C - Humidity range: 10 to 80% RH - Proven APT.line™ preheating chamber technology - Up to 40% energy savings compared to previous model - Energy-efficient cooling through state-of-the-art inverter compressor - Cooled with environmentally friendly refrigerant R-600a - Door heating prevents condensation Credexfr Ubepfx Afloh - Adjustable fan speed - Humidity regulation via capacitive humidity sensor and fast-response steam humidification - Rugged housing with HIT sandwich technology - Stainless steel interior chamber - Inner doors made of safety glass coated with metal oxide - Two stainless steel wire shelves - 30 mm access port with silicone plug - Stackable design - Intuitive touchscreen controller with time-segment and real-time programming - Internal data logger, measurement values in open format readable via USB - Independent class 3.3 temperature safety device (DIN 12880) with optical and acoustic alarms - Device self-test for comprehensive status analysis Data interfaces: - Ethernet, USB - BINDER Multi Management Software APT-COM™ Basic Edition

Condition: refurbished (used), This refurbished utensil washer features an extra-high loading height, making it suitable for cleaning large trays as well. The machine has been fully overhauled and is ready for use. Connection and transport can be arranged via Delta Horeca. Article number: 25959 Brand: Winterhalter Model: GS660 Type: utensil washer Csdpfxow Ec Ars Aflsrh Dimensions (W x D x H): 1380x850x1800mm Basket interior dimensions: 612x672mm Loading height: 800mm Material: stainless steel Connection rating: 400V

Condition: used, functionality: fully functional, For sale: used chamber filter press – VICENTINI Technical specifications: Csdpfowrwt Eex Aflorh Includes diaphragm pump VICENTINI PM 800:  • output 800 l/h • max pressure 10 bar  • 1.1 kW motor • 1 piston • 64 strokes/min  • 1½″ inlet and outlet ports 22 cast iron round plates, Ø 660 mm Manual hydraulic closure (piston-driven) Approx. capacity: 350 kg per cycle Condition: working and ready to use

Condition: good (used), Year of construction: 2019, 1 x Pek-Mont single-trolley steam pasteurising chamber. Model - KP-1. Csdpovcyh Iofx Aflorh Serial number - 851. Date of manufacture - 2019. Electric supply - 400 V / 50 hz / 3 phase. Internal dimensions - 830mm wide x 830mm deep x 1800mm high. Overall dimensions - 950 mm wide x 1100mm long x 2000mm high.

Year of construction: 2002, condition: excellent (used), Severn Science Argon Vacuum Welding chamber, new in 2002, previously used in F1 motor racing facility. Crsdpfx Afjrwnrgoljh With Edwards E2M 80 vacuum pump. Excellent condition, very rarely used.

Condition: excellent (used), Vötsch Type: VT 7012 S2 Water-cooled Two-chamber design Hot chamber: The temperature range of the hot chamber is from +50°C to +220°C. Temperature deviation over time in the center of the chamber is ± 1 K. Temperature deviation over space is ± 2 K. Temperature change rate: Heating: 11 K/min. Cold chamber: The temperature range of the cold chamber is from -80°C to +70°C. Temperature deviation over time in the center of the chamber is ± 1 K. Temperature deviation over space is ± 2 K. Temperature change rate: Heating: 2 K/min. Cooling: 3 K/min. Test chamber volume: 125 liters. Hot chamber temperature range: +50°C to +220°C. Crodowzilrepfx Afleh Cold chamber temperature range: -80°C to +70°C. Test chamber dimensions: Width: 470 mm. Depth 650mm Height 410mm External dimensions: Width 930mm Depth 2115mm Height 1970+mm Plug-in diameter 67mm Voltage: 3/N/PE AC 400V ±10% 50Hz Rated power 10 kW Rated current 25 A Refrigerant R404A / R23 Weight: 1000 kg For your safety, the following information is provided as a buyer! The following steps are carried out in advance on our chambers: 1. Functional testing and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), functionality: fully functional, Machine for washing cutter trolleys. The machine is in excellent condition, barely used. We speak English, German, and ex-Yu languages. Contact also possible via WhatsApp. Credpfx Afsxfibxsleh

Year of construction: 1995, condition: excellent (used), functionality: fully functional, machine/vehicle number: SB11/300/40, For sale is a Weiss climate test chamber. Designation: SB11/300/40 Cooling-heating operation: -40...+180 °C Climate operation: +10...+95 °C Humidity range: 10...98 % RH Temperature stability The temporal temperature stability in climate mode is ±0.1...±0.5 K The temporal temperature stability in cooling-heating mode (without climate) is ±0.2...±0.5 K Humidity stability The temporal humidity stability across the entire operating range is ±2...±3 %RH Condenser: air-cooled Rate of temperature change: Cooling: approx. 3.1 K/min Heating: approx. 3 K/min Cedjw Dygfopfx Aflorh Test chamber volume: approx. 301 L Internal dimensions: Height 680 mm, Width 540 mm, Depth 820 mm External dimensions: Height 1700 mm, Width 800 mm, Depth 1780 mm Weight: approx. 420 kg / Power supply: 4.8 kVA Electrical connection: CEE plug 16 A Connection voltage: 400V/3Ph+N+PE/50 Hz (+6%/-10%) Refrigerant: R404A! Version: mobile Type: SB11/300/40

Year of construction: 2013, condition: good (used), BHT INNOVA E3 Professional Bronchoscope Washer INNOVA – Professional Endoscope Washer for Practices and Small Clinics The INNOVA™ E3s is the world's best-selling BHT endoscope washer. This endoscope washer is compact and offers a high capacity for endoscopes or bronchoscopes. Depending on the reprocessing, a total of 10 to 20 endoscope reprocessings are possible daily. This makes it the perfect solution for private medical practices and small clinics that value safe hygiene, efficiency, and reliability. Reliability and maximum cleanliness in every cycle: Compliant with DIN EN ISO 15883-1/-4 and the guidelines of the Robert Koch Institute (RKI), and with many additional functions, e.g., thermal self-disinfection at 90°C according to DIN EN ISO 15883-4, 4.8.1. - Flexible in combination with another INNOVA® E2 or E3 for 30 to 40 reprocessings daily. - Suitable for both glutaraldehyde and peracetic acid from a wide range of suppliers. - Suitable for commercially available endoscopes from Fuji, Olympus, Pentax, Storz, and Wolf. Crodein Edwopfx Afljh - Single-channel connection or patented pressure chamber available. - Thermal reprocessing option, e.g., for multiple biopsy forceps, polyp loops, etc. - Thermal disinfection of the final rinse water as recommended by the Robert Koch Institute (RKI) for the DH version. - Secure documentation and traceability through batch control. User and endoscope identification via barcode scanner. - Data output via printer, data logger, or computer interface. Easy integration into existing IT systems Number of endoscopes: For 2 endoscopes or 4 ENTs Hygienic design: Hygienic workflow, single-door Channel connection system: Single-channel connection or patented pressure chamber system possible Single-channel monitoring system (CMS): No Chemistry Glutaraldehyde / Peracetic Acid: Both possible: DH version (with boiler, for glutaraldehyde) or DC (filter solution, for glutaraldehyde or peracetic acid) Documentation and integration: Yes, interface for printer/data logger as standard. Printer as standard. Optional scanner/IT interface Thermal reprocessing of instruments at 90°C: Available with additional equipment Electrical installation: 3-phase 400 V / 50 Hz AC+N+PE. Connected load: 11 kW. Fuse rating: 3 x 20 A Year of manufacture: January 19, 2013 Item condition: used Find more items - new and used - in our shop! International shipping costs on request!

Condition: good (used), Heavy duty high pressure washer. Two motors - 90kW + 1,5kW Machine was used for few hours and then stored at the warehouse. Delivery is available. Codpfsh Rkiljx Aflorh

Condition: good (used), Year of construction: 2014, 156 USED Freezer, freezing chamber. Important: This appliance does not include any external units. TECHNICAL DATA: - Indoor temperature: -21 to +15°C - Year of manufacture: 2014 INTERNAL DIMENSIONS (in cm): - Width 426, - Length 786, Csdpoxgqfuofx Aflsrh - Height 253. EXTERNAL DIMENSIONS (in cm): - Width 480, - Length 825, - Height 270. The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: excellent (used), Vötsch Model: VT³ 4100 Water-Cooled Temperature Test Chamber S!MCON/32.NET (with Touch Panel) Control System Features: - Color touchscreen with intuitive menu navigation (typically 5.7" or larger) - Programming of temperature/humidity profiles with ramps and dwell times - Data acquisition & logging (e.g., temperature profile, alarms) - USB port for data export (CSV, optionally S!MPATI compatible) - Network interface (Ethernet) for remote monitoring and control - User management with password protection - Interfaces: Volt-free contacts, optionally Modbus or Profibus VT³ 4100 – Technical Specifications (Temperature Test Chamber) - Test volume: 990 liters - Temperature range: -40 °C to +180 °C - Temporal temperature deviation: ±0.1 to ±0.5 K - Spatial temperature deviation: ±0.5 to ±1.5 K - Temperature gradient: 1 to 3 K - Temperature change rate (per IEC 60068-3-5): • Heating: 4.0 K/min • Cooling: 3.0 K/min - Maximum heat compensation capacity: 4500 W - Calibration values: +23 °C and +80 °C - Internal dimensions (W×D×H): 1100 × 950 × 950 mm - External dimensions (W×D×H): 1390 × 1955 × 1995 mm Feed-Throughs: The chamber is equipped with feed-throughs on both the right and left sides, allowing insertion of measuring cables and test devices into the test space. • 1 × L1 nominal width 50 mm • 1 × R1 nominal width 125 mm • 3 × R1 nominal width 50 mm Electrical connection: 3/N/PE AC, 400V ±10%, 50Hz Power consumption: 11.5 kW Rated current: 22 A Noise level: approx. 62 dB(A) Crsdpowyu H Ejfx Afloh Refrigerant: R452A Weight: 920 kg Important information for buyers: For your security, the following measures are carried out on all our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant, if needed 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run Condition: used Scope of delivery: (see picture) (Subject to change and errors in technical data; information may be subject to alteration!) For any further questions, feel free to contact us by phone.

Condition: good (used), Year of construction: 2005, functionality: fully functional, (2x) Climate chamber for stability tests The system for storing stability samples consists of 2 climate chambers. 2 climate chambers are supplied by an electrical control cabinet and have separate circuit diagrams. The climate chambers are based on cooling cells from Viessmann. The climate chambers are dimensionally identical and equipped with stainless steel shelves. The climate chambers were connected to a measured value recording system. This is currently not available for the system. However, a connection to a building management system is basically possible and prepared. The entire system was taken out of service in 2024 and finally qualified. The qualification documents can be made available on request. The delivery and installation of the system as well as the technical service were carried out exclusively by ThermoTEC. The client offers the objects mentioned EXW Ex Works "ex works". This means that the dismantling and loading of the objects is the responsibility of the buyer. The system essentially consists of: 2 constant climate chambers made of 80mm PU elements, stainless steel floor and single-leaf revolving door with frame heating 2 chamber fittings for air conditioning consisting of: -Fans for circulating the chamber air -Direct evaporation register with refrigerant R404A, for cooling and dehumidification -Electric resistance heating 2*1.5kW Cold steam inlet hoses from the ultrasonic humidifier 2 air-cooled refrigeration condenser units for cooling and dehumidifying the climate chambers. 2 ultrasonic humidifiers with an output of 1kg/h Switch cabinet for controlling and regulating the climate chambers The circulating air of the constant climate chambers is sucked in via the air conditioning unit, processed and blown out via the front. Credpfxsvpu Tls Aflsh The temperature and humidity sensor mounted in the intake area transmits the actual values of the test room to the respective control circuit of the climate chambers. An independent process controller is installed in the control cabinet front for each control circuit (temperature/humidity). The controllers control the following functions as required: > HEATING with electric resistance heating > COOLING with refrigeration unit and direct evaporation > HUMIDIFICATION with ultrasonic humidifier > DEHUMIDIFICATION with refrigeration unit and direct evaporation The climate chamber temperature and humidity are controlled automatically. Cell type: Tecto cooling and deep-freezing cell Standard WL80 VIESSMANN Dimensions of the climate chambers (KK) 2 each: Outside (WxDxH): 2100 x 3000 x 2310 mm Door dimensions (WxH): 800 x 2000 mm Inside (WxDxH): 1940 x 2840 x 2140 mm Climate chamber 1 25°C/60%RH - A0429_00 - Year of construction: 2005 Climate chamber 2 25°C/60%RH - A0430_00 - Year of construction: 2005

Condition: like new (used), Year of construction: 2012, Parker Engineering & Design Vertical Light Stack Module For testing solar modules Photovoltaic modules Electrical and mechanical safety testing Support for product development, design and quality control Detection of potential problems during development Quality and safety control  Cedpfx Afsh Rvh Sjlerh Endurance test stand  Temperature control  Mobile on rollers Entry pockets for forklift trucks 400 VAC, 3.PH, 50 AMP IR. 10,000 amp Year 2012 Weight 1400 kg Further test equipment - new and used - you will find in our shop! International shipping costs on request!

Condition: good (used), Year of construction: 2014, 155 USED Freezer, walk-in freezer. Important: This appliance does not include any external units. TECHNICAL DATA: - Internal temperature: -18 to +20°C - Power: 13.5 kW - Year of manufacture: December 2018 INTERNAL DIMENSIONS (in cm): - Width 370, - Length 610, Crsdsxgp Iuepfx Aflsh - Height 250. EXTERNAL DIMENSIONS (in cm): - Width 390, - Length 653, - Height 280.

Condition: good (used), Vötsch Model: VCS 7130-10 Vötsch Climate Test Chamber, Water-cooled Specifications for Temperature Testing: - Temperature range: -70°C to +180°C - Temporal temperature deviation at the center of the usable test volume: ±0.3 to ±0.8 K - Spatial temperature deviation: ±0.5 to ±2 K - Temperature gradient: 1 to 4 K - Temperature change rate: - Heating: 11 K/min - Cooling: 10.5 K/min Specifications for Climatic Testing: - Temperature range: +10°C to +95°C - Humidity range: 10 to 98% RH - Temporal temperature deviation at the center of the usable test volume: ±0.2 to ±0.5 K - Spatial temperature deviation: ±0.5 to ±1 K - Temperature gradient: 1 to 2 K - Temporal humidity fluctuation at the center of the usable test volume: ±1 to ±3 % RH Technical Data: - External dimensions (with hinges and door lock): - Height: 1995 mm, Width: 1680 mm, Depth: 1855 mm - External dimensions (without hinges and door lock): - Height: 1995 mm, Width: 1300 mm, Depth: 1855 mm - Internal chamber dimensions: - Height: 950 mm, Width: 1100 mm, Depth: 950 mm - Test chamber volume: approx. 1300 liters Feedthroughs: - The chamber is equipped with feedthroughs on both the right and left sides, allowing measurement cables and test devices to be routed into the test space. - 1 x R1 NW 125 mm - 1 x L1 NW 50 mm Test Chamber Lighting: - Halogen bulb 24 V, 50 W Electrical specifications: - 3/N/PE AC 400V ±10% 50Hz - Rated power: 34.0 kW - Rated current: 50.0 A - Fuse (to be provided on site): 100 A slow-blow - Max. heat emission to environment: 2.2 kW Permissible Test Specimen Weight: - Total load on grate supports: 100 kg Codswynmxopfx Afljrh - Chamber floor: 150 kg; Inserted rack: 50 kg Refrigerants: - R 404A / R 23 Weight: 1600 kg For your safety as a buyer, please note the following information! The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, recharge with legally compliant refrigerant 3. Leak test with certificate 4. After a successful check, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Subject to changes and errors in technical data and information!) For further questions, please feel free to contact us by phone.

Condition: good (used), Year of construction: 2005, Andreas Schmid Climatic Test Chamber -40°C to +130°C Manufacturer: Andreas Schmid Codpfx Afeuuibkeljrh Type: VKT 3.000 /-40/+130 Temp. Range: -40°C to +130°C Program Controller: Stange SE - 502 Line Voltage: 400 V Rated Current: 32 A Refrigerant: R 404 A / R 23 Year of Manufacture: 2005 External Dimensions: W 1600 x D 800 x H 2430 mm TK-16 Find more items - new and used - in our shop! International shipping costs on request!

Condition: excellent (used), Year of construction: 2019, 885 USED shop washers. Manufacturers: Meiko, Winterhalter, Hobart. For more information, please contact me by phone or email. The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: renovation / transport / assembly / commissioning of the device. The price is a net price per 1 pcs. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. We have a lot of baking ovens in our warehouses: batch oven, shelf oven, rotary oven, trolley oven, gas, oil, electric, from various manufacturers. We also offer bakery machines, bakery equipment, roll lines, and bread lines. If you want to see our full current offer, visit our Bakeres profile. Cedpfsuavwbex Afljrh

Condition: excellent (used), Heraeus Vötsch Type: VT 7021 Air-cooled temperature test chamber 1 port, nominal width 80 mm, Test chamber volume: 210 liters Temperature range: -70°C to +180°C Temporal temperature deviation: ± 0.2 to ± 0.5 K Codjwylv Dopfx Aflerh Spatial temperature deviation: ± 0.5 to ± 1.5 K Temperature change rate (heating): 2.5 K/min Temperature change rate (cooling): 2.5 K/min Max. heat compensation: 800 W Test chamber dimensions: Width 560 mm, Depth 570 mm, Height 630 mm External dimensions: Width 850 mm, Depth 1250 mm, Height 1640 mm Electrical connection: 1/NPE AC 230 V ± 10% 50 Hz Rated power approx. 1.8 kW, rated current 12 A Refrigerant: R404A and R23 Weight: 355 kg For your safety as a buyer, please note the following information! The following procedures are performed on the chambers we offer, in advance: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant, if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see picture) (Subject to technical modifications and errors in the details!) For further questions, please feel free to contact us by phone.

Condition: excellent (used), Vötsch Type: VT 7060 Vötsch VT 7060 Temperature Chamber 600 Liter with Simcon 32-net Chamber is air-cooled Reliable climate chamber for demanding environmental simulations Ideal for laboratory, development, and quality assurance applications. Device Description: For sale is a professional temperature chamber from the manufacturer Vötsch Industrietechnik, model VT 7060 with SIMcon 32-net controller. This powerful unit is suitable for a wide range of demanding environmental simulations—from material testing and electronics tests to long-term climatic stress tests. Technical Data (Excerpt): Model: Vötsch VT 7060 Internal volume: approx. 600 liters Temperature range: –40°C to +180°C Temperature deviation in steady-state conditions: Temporal: ±0.1 K to ±0.5 K Spatial: ±0.5 K to ±2.0 K Temperature change rates (without test specimen): Heating: 4 K/min Cooling: 3 K/min Control system: SIMcon 32-net with touchscreen panel Interfaces: RS232, optional RS485/422 1 × port NW 50 mm left 1 × port NW 125 mm left 2 × ports, each NW 125 mm right External dimensions (approx.): Width 1090 × Height 1960 × Depth 1995 mm Internal dimensions (approx.): Width 800 × Height 800 × Depth 950 mm Rated voltage: 3/N/PE AC, 400 V ±10%, 50 Hz Rated power: 9.1 kW Rated current: 19.0 A Refrigerants: R 404A and R 23 Weight: approx. 675 kg For your safety as a buyer, please note the following information! The following points are carried out on the chambers we offer before sale: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant Cjdpfx Afewybb Njlsrh 3. Leak test with certificate 4. Upon successful inspection, the chambers undergo a documented trial run. Shipping / Collection: Collection preferred Shipping on pallet via freight forwarder Europe-wide possible. (Shipping costs depending on effort) Condition: used Scope of delivery: (See picture) (Specifications and possible errors subject to change!) For further questions, please feel free to contact us by phone.

Condition: excellent (used), CTS Type: C-70/600 Climate Test Chamber CTS C-70/600 incl. Programming/Evaluation Software CID-PRO – Year of manufacture: 2020 – Water-cooled – Fully equipped – Excellent condition For sale is a high-quality climate test chamber CTS C-70/600 from 2020, with the latest housing design, water cooling, and extensive special equipment. The unit is ideally suited for precise climate and temperature testing in research, development, and quality assurance. Full Equipment includes: - Volt-free contact for fault reporting - 2 digital outputs, volt-free – for controlling test samples externally - Software temperature limiter (min. and max. freely adjustable) - Ethernet interface - Programming and evaluation software CID-PRO included - Observation window in the door - Automatic water replenishment - Independent temperature limiter (PT100) - 1x pipe port NW 50 (right side) - 2x pipe ports NW 125 (right side) - 2x pipe ports NW 125 (left side) - Compressed air connection, switchable via digital channel – for dry compressed air to prevent condensation - Mobile/caster-mounted device design Temperature Testing: - Temperature range: -70 °C to +180 °C - Temperature deviation: 0.1 K to 0.3 K over time (in stabilized condition) - Mean temperature change rate, without test item and without radiant heat: Heating: 3.5 K/min Cooling: 3.0 K/min (in the range from +180 to -65°C) - Radiant heat max. 4000 W at +20°C Climate Testing: - Temperature range: +10°C to +90°C - Humidity range: 10% to 98% rel. humidity - Dew point range: +7°C to +94°C - Temperature deviation: 0.3 K over time Csdpfxowxxf Ao Aflorh - Humidity deviation: 1 – 2% r.h. over time up to 90% r.h. max. 1 – 3% r.h. over time above 90% r.h. Test chamber dimensions: Height: approx. 850 mm, Width: approx. 850 mm, Depth: approx. 830 mm External dimensions: Height: approx. 1900 mm, Width: approx. 1115 mm, Depth: approx. 1850 mm Test chamber volume: 600 liters Electrical connection: 400V 3/N 50Hz Power rating: 8.7 kW, Nominal current: 14.6 A Refrigerants: R452A / R23 Weight: 700 kg Important information for your security as a buyer! The following steps are performed on all chambers we offer prior to sale: 1. Function check and replacement of necessary components 2. Refilling with legally compliant refrigerant if necessary 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of supply: (See image) (Specifications and information subject to change and error!) We are happy to answer any further questions you may have by phone.

Condition: excellent (used), Vötsch Model: VT 7012 S2 Shock Test Chamber, Air-cooled Two-chamber design Hot Chamber: The temperature range of the hot chamber extends from +50°C to +220°C Temporal temperature deviation at the center of the usable space: ± 1 K Spatial temperature deviation: ± 2 K Temperature change rate Heating: 11 K/min Cold Chamber: The cold chamber temperature range is from -80°C to +70°C Temporal temperature deviation at the center of the usable space: ± 1 K Spatial temperature deviation: ± 2 K Temperature change rate Heating: 2 K/min Cjdpfx Afswxc I Uslorh Cooling: 3 K/min Test chamber volume: 125 liters Hot chamber temperature range: +50°C to +220°C Cold chamber temperature range: -80°C to +70°C Test chamber dimensions: Width 470 mm, Depth 650 mm, Height 410 mm External dimensions: Width 930 mm, Depth 2115 mm, Height 1970+ mm Port diameter: ∅ 67 mm Voltage: 3/N/PE AC 400V +10% 50 Hz Nominal power: 10 kW Nominal current: 25 A Refrigerants: R452-A / R23 Weight: 1,000 kg Important information for your safety as a buyer! The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Specifications and technical details are subject to change and correction!) For further questions, please feel free to contact us by phone.