Used Curing Chamber for sale (2,219)

Condition: used, Year of construction: 1909, 3D Systems ProCure 750 Used to cure 3D-printed parts in an automotive manufacturer's development department. Kljdpjv Upuuofx Ab Tjt All the lights are lit and the turntable is rotating.

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, temperature: 250 °C, power: 30 kW (40.79 HP), Curing oven with two chambers (one programmable heat cycle per chamber)! Equipped with conveyor belt and cleanroom classification! TECHNICAL DETAILS Process area (minimum): 1,700 x 1,400 mm (2.40 m²) MACHINE DETAILS Electrical Data Klodpfjyk Sd Uex Ab Tot Main power supply: 3x400 V ±5%, 50 Hz ±5% Control voltage: 230 Vac 50 Hz and 24 Vdc Main fuse: 140 A Motor Output Circulating fan motor: 2.2 kW (2 units) Drive motor for vertical transport: 0.39 kW Drive motor for horizontal transport: 0.09 kW Heating Heating type: Electric with sealed tubular elements Output: 30 kW per chamber Temperature range: 50 °C to 250 °C EQUIPMENT Conveyor system Cleanroom classification

Condition: excellent (used), Handle UVALOC 400 Loctite 97039 Curing Chamber The UVALOC 400 curing chamber (LOCTITE 97039) is a surface jet curing system, developed for curing light-curing adhesives with UVA rays and visible light. It is suitable for manual curing of individual parts during the production process as well as for laboratories. The following is integrated in the device a control unit with integrated mains switch and operating hours counter a lamp housing with the burner reflector ignitor. In with UV protection box Features: Contains 400 W metal halide lamps Optimized for light emission in the UVA range Typical curing area 10 x 19 cm Expected service life of the UV lamp up to 1000 h The power supply unit can be detached from the lamp module and operated separately Adjustable lamp height for optimum irradiation With glass filter to avoid short-wave UVB/UVC emission Technical data: Mains connection 230 V AC ± 4%, 50 Hz Power consumption approx. 460 W Mains fuse 2 x 5 A, slow-blow Klsdpjtv H A Tsfx Ab Tot Glass tube miniature fuse 5 x 20 mm Warm-up time of the UV lamp 3 minutes Lamp type 400 W high-pressure metal vapor lamp with base on both sides Lamp life approx. 1000 hours Intensity See section 5.1 Dimensions (width x height x depth): 220 mm 472 mm 300mm Ambient and operating temperature + 10 °C ... + 30 °C Storage temperature - 10 °C ... + 60 °C Weight ~ 11.5 kg Condition: gebraucht / used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and specifications!) We will be happy to answer any further questions you may have on the phone.

Year of construction: 2011, condition: used, Intervac GmbH Mobile Double Chamber Vacuum Machine Type: INV 11/11 Year of construction: 2011 230/400 V, 50 Hz, 2.5 kW Weight: 355 kg Seal length: (2x) 620 mm Dimensions chamber: (2x) 600 mm x 670 mm Total dimensions: 1550 mm x 970 mm x 1220 mm. Klodsym U Syjpfx Ab Tjt

Condition: used, Webomatic Mobile Double Chamber Vacuum Packer Type: CD 120-PR Serial number: 5710JL525 400 V, 3 Ph, 50 Hz, 5.0 A, 2.2 kW Seal length: (2x) 640 mm Kljdpfoym U Inex Ab Tst Dimensions chamber: (2x) 650 mm x 570 mm Busch vacuum pump Total dimensions: 1420 mm x 840 mm x 1060 mm.

Condition: excellent (used), For sale: timber drying kiln with 3 plus 3 chambers. In very good condition. Kledpfx Asy R Tdwsb Tot

Condition: excellent (used), Two-chamber stainless steel tank 66m3 (40 + 26 m3) DIMENSIONS: - Diameter: 3,245 mm - Height: 13,053 mm Year of manufacture 2006 Weight: 4,680 kg Upper part: 40° slope - Lower part: 2% slope. DN 600 hatch with hinged cover at the top. stainless steel pressure-vacuum valve At the bottom, a DN400 hatch with a hinged cover a stainless steel pressure-vacuum valve Upper tank heating: 6 coils, exchange surface 6.95 m2, PS 2 bar Above 2 coils, exchange surface 2.33 m2, PS 2 bar A device for moving grounds, test valve Lower tank heating: 4 coils, exchange surface 4.64 m2, PS 2 bar. Above: 2 coils, exchange surface 2.33 m2, PS 2 bar. Liquid level gauge 555x432 rectangular hatch DN70 ball valve The tanks were used in the wine industry. Klsdpovlpctjfx Ab Tet The tanks have a technical drawing. The tanks are dismantled and ready for delivery.

Condition: excellent (used), Type: UF 450plus Airflow: forced recirculation Temperature Temperature range: +20 °C to +300 °C Operating range: at least +10 °C above ambient temperature Setting accuracy: – up to 99.9 °C: 0.1 °C – from 100 °C: 0.5 °C Temperature sensors: 2× Pt100 (DIN Class A, 4-wire) Interior and capacity Volume: 449 liters Internal dimensions (W × H × D): 1040 × 720 × 600 mm Maximum number of inserts: 8 Load per insert: 30 kg Maximum total load: 300 kg Interior: stainless steel, all-round heating External dimensions and weight External dimensions (W × H × D): approx. 1224 × 1247 × 784 mm Net weight: approx. 160 kg Gross weight: approx. 185 kg Electrical data Voltage: 400 V, 3-phase Power: approx. 5800 W Control and regulation Control: ControlCOCKPIT TwinDISPLAY Controller: digital PID microprocessor Timer: 1 minute to 99 days Functions: SetpointWAIT, HeatBALANCE, calibration at 3 temperature points Adjustable parameters: temperature, fan speed, exhaust flap, time programs Ventilation Recirculation: adjustable in 10% increments Fresh air: electronically adjustable Exhaust: with throttle valve Communication Interfaces: Ethernet, USB Software: AtmoCONTROL Safety Temperature limiter (TB), protection class 1 Temperature monitor/limiter (TWW/TWB) selectable ASF system for over- and under-temperature monitoring Equipment Stainless steel door with 2-point locking Stainless steel housing Low-noise air turbine Rear has 2 openings each with an approx. 12 cm diameter. Klsdpfx Asy T Ictjb Tet Condition: used Scope of supply: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: good (used), UNHOLTZ-DICKIE / HS-Simulators Vibration Testing System Type: TA117SA-560 + HS 520 K 60 V Kedsy S S Eijpfx Ab Telt Manufacturer: UNHOLTZ-DICKIE Corporation / HS-Simulators Horstmann GmbH For sale is a complete electrodynamic vibration testing system consisting of an UNHOLTZ-DICKIE shaker system, SALL50F power amplifier, VWIN II control system, and an HS-Simulators climate chamber. Ideal for combined vibration and climate testing in industrial, automotive, aerospace, electronics testing, as well as research and development applications. The hall crane / other hall equipment visible in the pictures is not included in the scope of supply. Shaker / Vibrator Manufacturer: UNHOLTZ-DICKIE Corporation Type: 560 System: TA117SA-560 Serial Number: 259 Air-cooled electrodynamic shaker Sine force: 6000 lbf peak / 26.7 kN peak Random force: 5200 lbf RMS / 23.1 kN RMS Max. acceleration of free table: 100 g / 981 m/s² Shaker stroke: 1 inch / 25.4 mm Axial resonance frequency: approx. 2200 Hz / approx. 2.2 kHz Armature effective weight: 45 lb / approx. 20.4 kg Driver Coil: 200 A Sine 140 A Random Air-cooled and vibration-isolated system. Power Amplifier Manufacturer: UNHOLTZ-DICKIE Corporation Type: SALL50F Power Amplifier Serial Number: 4414 Power Module: PML-50-S Master Controller: MCLL50 Supply voltage: 400 V / 3 Phase / 50 Hz Power consumption: 41 kVA / 60 A Blower: 15 kVA / 22 A Maximum Driver Currents: 440 A RMS OUT SINE 300 A RMS OUT RANDOM Forced air cooling. Control System UNHOLTZ-DICKIE VWIN II DSP Vibration Control System including industrial PC / monitor as shown in the pictures Control Console: MA117SA-560 Serial Number: 1838 Charge Amplifier: Type 122P Serial Number: 8963 Supported test types: Random Vibration Sine Vibration Resonance Dwell Classical Shock Pulse SRS Shock & Analysis Sine-on-Random Random-on-Random Gunfire Interfaces: TCP/IP RS232 Ethernet USB HS-Simulators Climate Chamber Manufacturer: HS-Simulators Horstmann GmbH Type: HS 520 K 60 V Temperature range: -60 °C to +180 °C Electrical data: 380 V 17 A 10 kW Refrigerant: R13 R502 Features: Combined climate and vibration testing Complete electrodynamic testing system DSP-based real-time control Forced air cooling system Completely wired testing system Original documentation available: Operating Manual Maintenance Manual System Specifications System Diagrams Performance Curves Dimensions / Weight Amplifier: approx. 1000 x 537 x 825 mm Climate chamber: approx. 1200 x 1800 x 2000 mm Total weight estimated: approx. 2500 – 4000 kg Transportation only by a suitable heavy-duty transport company. Technical data partially estimated. Specifications may vary. Condition Used system from industrial application. Optical condition see pictures. Functionality not fully tested. Inspection possible and desired upon agreement. Scope of delivery UNHOLTZ-DICKIE shaker model 560 SALL50F power amplifier Control console / control system VWIN II controller system Charge amplifier HS-Simulators climate chamber HS 520 K 60 V Industrial PC / monitor as shown in the pictures Documentation and accessories as shown in the pictures Loading possible upon agreement. Commercial sale without warranty. Errors and prior sales excepted.

Condition: excellent (used), Weiss Temperature Shock Test Chamber Here we offer you a temperature shock test chamber. Weiss Temperature Shock Test Chamber, Air-Cooled (Compressor has been replaced!) Specifications: Temperature range, hot chamber: +60°C … +220°C Temperature range, cold chamber: -10°C … -80°C Hot/cold chamber switching time: 10 s Temperature stability: ±1 K Dimensions and other data: External dimensions: Height 1990 mm Width (without and with swivel arm): without... approx. 1820 mm, with... approx. 1915 mm Depth (without and with test chamber door): without... approx. 900 mm, with... approx. 1155 mm Dimensions of the lifting platform (test chamber): Height 450 mm, Width 500 mm, Depth 600 mm Volume: 130 liters Test chamber load: max. 20 kg Load on the test chamber floor: max. 20 kg Cooling water pressure: min. 2 ... max. 6 bar Max. fuse rating: 35 A (plug 32 A CEE) Sound pressure level, 1 m in front of the device: approx. 65 dB(A) Connection values: 3/N/PE/AC 400V ±10% 50Hz / 14.0 kW Rated current: 26.0 A Refrigerant: R 404A / R23 Weight: approx. 950 kg Type: TS 130 Kodpfxjk E Htyj Ab Telt Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: good (used), Year of construction: 1994, Clamping Unit: Clamping force: 7,000 kN Operating pressure: 250 bar Specific pressing pressure: 610 N/cm² Number of levels: 2 Installation height with 75 mm heating plate & 20 mm insulating plate: approx. 2x 190 mm Piston stroke: approx. 400 mm Piston 1 diameter: 543 mm Clamping force, rapid traverse: approx. 2 x 85 kN Retraction force: approx. 2 x 47 kN Kodpfx Abey T I Ene Tolt Operating pressure: 300 bar Piston 2 diameter: 60/40 mm Stroke: 400 mm Estimated weight: approx. 16 tonnes Hydraulic System: Pressure adjustment: 40 - 300 bar Flow rate regulation: 0 - 99 % Flow rate l/min (HD): 45 against 300 bar Drive power: 22 kW Tank dimensions (LxWxH): 1000 x 770 x 535 mm Closing Speed: Rapid traverse: approx. 40 - 50 mm/s Slow closing: approx. 0 - 20 mm/s Pressing speed: approx. 0 - 3 mm/s Slow opening: approx. 0 - 20 mm/s Opening, rapid traverse: approx. 0 - 60 mm/s

Condition: used, This listing is for the Binder Fed 400 Drying Heating Chamber. The unit is in full working condition and ready for immediate use. Designed for consistent temperature control, it is ideal for drying, heating, and thermal testing applications in laboratory environments. Transparency Report and Technical Audit: Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. Klodpfx Abjy H I Ngo Tot Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Integrity: 100% Original Parts (Non-Refurbished)

Condition: good (used), Year of construction: 2018, Beelonia Trockenschrank TF5 Drying Cabinet Type - 11522 2018, stainless drying cabinet, generates an even air flow ensuring good drying, with stainless trolley and mesh trays 900mm x 760mm trays, adjustable temperature and timer settings, with ramp, 3Ph Klsdpfx Absyzikno Tjt

Condition: good (used), KÖHLER Corrosion Test System HK-400 Manufacturer: KÖHLER Type: presumed HK-400 Control System: ADWEST KÖHLER PC102 Marking: SSK_Köhler_0400-01 PN: 1356 For sale is a KÖHLER corrosion test system suitable for salt spray, condensation, and corrosion tests in industry, research, development, and quality assurance. The unit is designed for testing components, coatings, metal parts, and technical assemblies under corrosive environmental conditions. Visually, the system corresponds to a KÖHLER HK-400 model for salt spray and condensation testing. Technical specifications: Test chamber volume: approx. 400 liters Internal dimensions: approx. 1020 × 750 × 500 mm External dimensions: approx. 1970 × 1050 × 600 mm Temperature range: ambient +10 °C to approx. +55 °C Voltage: 220 V / 50 Hz Equipment/features: ADWEST KÖHLER PC102 control system Digital display unit Stainless steel test chamber Viewing window in the door Multiple test grids / shelves Integrated pressure gauges Connections for test media supply Industrial-grade construction Possible test procedures: Salt spray testing Kodsy N R Taspfx Ab Tjlt Condensation water testing Kesternich corrosion testing Corrosion testing on coatings and metal parts Automotive and industrial test applications Condition: Used equipment with signs of age and use. Visual condition as shown in the pictures. Important note: The original manufacturer's nameplate was not present on the unit. The technical data was compiled based on existing markings, pictures, and comparable KÖHLER HK-400 manufacturer information. Scope of delivery: System as shown All included items according to the pictures. Other notes: Inspection by appointment is possible. Loading can be arranged. Commercial sale – Sale without warranty. (Specifications subject to change and errors excepted.)

Condition: good (used), ESPEC Climate Test Chamber PL-3KPH Manufacturer: ESPEC Corp. Model: PL-3KPH Design: Air-cooled temperature and climate test chamber For sale is a used ESPEC climate test chamber for temperature and climate testing in research, development, quality assurance, and industrial applications. Technical Data: Test chamber volume: approx. 400 liters Temperature range: approx. -40 °C to +180 °C Humidity range: approx. 20% to 98% RH Internal dimensions (W x H x D): approx. 600 × 850 × 800 mm External dimensions (W x H x D): approx. 1010 × 1690 × 1195 mm Electrical connection: AC 400 V / 3~ / 50 Hz Max. current draw: approx. 11 A Weight: approx. 350 kg Cooling: Air-cooled No external water connection required Refrigerant as per label: R452A – approx. 1.2 kg Features: Touchscreen control Programmable and constant operation modes Temperature and humidity control Observation window in the door Stainless steel test chamber Interior lighting / chamber lamp Side cable/pipe port, approx. Ø 100 mm Overheat protection Integrated hour meter RS-232C interface Water tank system Specimen power supply control Time signal connection Kledjy N Awqopfx Ab Tjt Condition: Used machine with signs of age and use. Partial rust and corrosion present in the lower housing area. Interior with usage marks. See images for visual condition. Scope of Delivery: ESPEC Climate Test Chamber PL-3KPH One shelf included Delivery as shown Service: Function check and replacement of necessary components Refilling with legally compliant refrigerant if required Leak test with certificate Documented test run Notes: Inspection possible by arrangement. Loading can be organized. Commercial sale – Sold as-is without warranty. Subject to change and error.

Condition: excellent (used), CTS Temperature Shock Test Chamber Type: TSS-70/32 Manufacturer: CTS Klima Temperatur Systeme Version: air-cooled For sale is a CTS temperature shock test chamber designed for thermal cycling and shock testing in industrial, research, and development settings. Technical Specifications: Test chamber volume: approx. 32 liters Max. test specimen weight: approx. 10 kg Temperature ranges: Hot chamber: +50 °C to +200 °C Cold chamber: -80 °C to +100 °C Performance data: Heating rate: approx. 6 K/min Cooling rate: approx. 6 K/min Temperature change rate: up to approx. 100 K/min Transfer time: < 10 seconds Temperature deviation: ±1 K / ±2 K Electrical data: Connection: 400 V / 3/N / 50 Hz Rated power: approx. 9.7 kW Rated current: approx. 15.4 A Fuse: 16 A slow-blow Protection rating: IP 22 Refrigerants: R404A: 2.3 kg R23: 0.90 kg Pressure data: Operating overpressure: 25 bar Test pressure: 27.5 bar Dimensions: approx. 1325 x 2012 x 1820–2020 mm (W x D x H) Weight: approx. 650 kg Additional data: Sound pressure level: < 58 dB(A) Compressed air connection: 1/4" external thread Equipment: Two-chamber system (hot/cold chamber) Digital CTS controller Display / control panel Program mode Operating hours counter Observation window Interior lighting Temperature limiter Specimen protection RS232 interface Documentation: Declaration of conformity available Test certificates available Klsdpfx Ajy I Ntceb Tst Operating manual available Wiring diagram available Piping diagram available Quick guide available Safety data sheets available Note: The table shown in the photos is not included in the sale. Condition: Used Visual condition as seen in the pictures Scope of delivery as pictured Inspection by appointment possible. Loading can be arranged. Commercial sale. Sold without warranty. (Subject to change and error)

Condition: used, Year of construction: 2006, functionality: fully functional, power: 6 kW (8.16 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, inner dimension length: 9,150 mm, inner dimension width: 1,900 mm, inner dimension height: 3,000 mm, number of chambers: 2, Drying chamber with trolleys on rails 2 trolleys dimensions: 2x 1900*3000*9150 2x 3kW fans Kodpfoy Sbutsx Ab Tolt Automatically controlled with adjustable drying programs

Condition: excellent (used), Vötsch Temperature Shock Test Chamber Model: VT 7012 S2 Manufacturer: Vötsch Industrietechnik GmbH Design: Water-cooled For sale is a Vötsch temperature shock test chamber in a two-chamber configuration, designed for rapid temperature cycling tests. Suitable for use in industry, automotive, aerospace, as well as research and development. Kledpsy Iyuwofx Ab Tot Temperature Ranges: Hot Chamber: +50°C to +220°C Cold Chamber: -80°C to +70°C Temperature Data: Temporal temperature deviation: ±1 K Spatial temperature deviation: ±2 K Heating rate (hot chamber): approx. 11 K/min Heating rate (cold chamber): approx. 2 K/min Cooling rate: approx. 3 K/min Test Area: Volume: approx. 125 liters Internal dimensions: approx. 470 x 650 x 410 mm Cable port: Ø 67 mm Electrical Data: Connection: 3/N/PE AC 400 V ±10% / 50 Hz Rated power: approx. 10 kW Rated current: approx. 25 A Refrigerants: R404A: 2.9 kg R23: 1.27 kg Pressure Data: Low pressure max.: 22.5 bar High pressure max.: 25 bar Dimensions: Approx. 930 x 2115 x 1970 mm Weight: Approx. 1000 kg Equipment/features: Two-chamber shock test system Digital control Programmable operation Observation window Cable port Condition: Used Control system overhauled and newly rewired Control panel replaced Spindle and spindle motor replaced Plate heat exchanger insulated Scope of delivery: Vötsch VT 7012 S2 temperature shock test chamber Accessories as shown in the pictures Inspection by appointment possible. Loading can be arranged. Sold as-is, without warranty. (Subject to prior sale and technical modifications)

Condition: used, Year of construction: 2015, Dimensions (L/W/H) ca. 4020 x 2460 x 2600 mm Kedpoy Sbmiefx Ab Telt total power requirement 78 kW filling amount 1200 l carrying capacity max. 0,5 bath temperature 65 °C heating capacity 54 kW In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: used, Year of construction: 2015, 1 unit hardening furnace, RHODE ME65/13 Maximum operating temperature: 1300°C, power: 20kW, current: 29A Kljdpfjy Tkciox Ab Tet Color: as shown in the pictures, in accordance with the images and inspection Year of manufacture: 2015 Condition: used

Condition: excellent (used), RS-Simulatoren Temperature Shock Chamber ST2K 1000 / 55 The system was regularly serviced and maintained by the manufacturer until it was decommissioned. Equipment Data Manufacturer: RS-Simulatoren Model: ST2K 1000 / 55 Design: Temperature shock chamber Cooling: Water-cooled Description Used temperature shock chamber for standard-compliant thermal shock testing. Suitable for material, component, and reliability testing. Used in industry, automotive, research, and quality assurance. Kjdpoy H Igfofx Ab Tjlt System Description • 2 separate temperature chambers (hot/cold) • Automatic horizontal transfer of test basket • Rapid switch operation for temperature shock testing Temperature Ranges Hot chamber: +40 °C to +180 °C Cold chamber: -70 °C to +100 °C Time deviation: ±0.8 K Test Chamber Volume: approx. 580 liters Internal dimensions (W x H x D): approx. 1070 x 680 x 800 mm Max. load: approx. 150 kg Power Supply 400 V / 3~ / N / PE / 50 Hz Power: max. 33 kVA Current draw: max. 65 A Media Connections Cooling water: G 1", approx. 3 bar (max. 10 bar) Cooling water consumption: max. 3.2 m³/h Cooling water return: zero pressure Compressed air: NW 7.2, 4–10.5 bar Dimensions External (W x H x D): approx. 2800 x 2400 x 2200 mm Weight approx. 2800 kg Equipment Features • Horizontal basket movement • C-rails in test chamber • Large test basket (>1000 mm) • Observation window • Interior lighting • SE-604 controller • Program operation and data logging • RS232 interface Refrigeration System Refrigerants: R449A / R23 R449A: approx. 8.0 kg R23: approx. 2.5 kg Operating Data Operating hours: approx. 4,500 hrs Sound level: approx. 67 dB(A) Ambient Conditions Temperature: +12 °C to +30 °C Humidity: 25 % to 75 % rH Scope of Delivery RS-Simulatoren Temperature Shock Chamber ST2K 1000 / 55 Scope of delivery as shown Optional service before delivery: • Function test • Refrigerant service • Leak test • Trial run with protocol Condition Used. Condition as shown in the pictures. Note Used equipment, sold without warranty. Inspection possible by appointment. Loading and transport can be organized upon request. Subject to change and prior sale. If you have any questions, please feel free to contact us.

Condition: excellent (used), RS-Simulatoren Climate Chamber KSS 600/75-10K Device Data Manufacturer: RS-Simulatoren Prüf- und Messtechnik GmbH Model: KSS 600/75-10K Design: Climate Test Chamber / Environmental Simulation Chamber Cooling: Water-cooled Description Used climate test chamber from RS-Simulatoren. Suitable for temperature tests, climate tests, material, and aging tests. For use in industrial testing and measurement applications. Technical Data Temperature range: -75 °C to +180 °C Temperature change rate: heating/cooling approx. 10 K/min Test chamber volume: approx. 600 liters Dimensions Internal (W x D x H): 840 x 840 x 840 mm External (W x D x H): 1200 x 1600 x 1995 mm Electrical Data 400 V / 3~ / N / PE Current consumption: approx. 55 A Refrigeration System Refrigerants: R404A / R23 R404A: 6.0 kg R23: 3.0 kg Weight approx. 1,400 kg Equipment Ksdpjy H Ib Asfx Ab Tolt - RS-Simulatoren control / operating panel - Programmable operation - Observation window - Temperature monitoring in the test chamber - Operating hours counter - Side feedthrough - Robust industrial design Scope of Delivery - RS-Simulatoren climate chamber KSS 600/75-10K - Delivery as shown Service before delivery (optional) - Functional test - Refrigerant service - Leak test - Test run with protocol Condition Used. Condition as per images. Note Used device, sold without warranty. Inspection possible by arrangement. Loading and transport can be organized upon request. Subject to prior sale and changes. If you have any questions, please feel free to contact us.

Condition: excellent (used), Binder Climate Test Chamber MKFT 720 E3.2 Device Information Manufacturer: Binder Model: MKFT 720 E3.2 Year of Manufacture: 2017 Item Number: 9020-0288 Design: Climate Test Chamber (Change-over type) Cooling: Air-cooled Description Used Binder climate test chamber. Suitable for temperature, climate, material, and aging tests, as well as stress tests. Intended for applications in industry, research, development, and quality assurance. Technical Specifications Temperature Range: -70 °C to +180 °C Humidity Range: 10% to 98% RH Internal Volume: approx. 734 liters Max. Total Load: 160 kg Max. Load per Shelf: 40 kg Dimensions External (W x H x D): 1615 x 2005 x 1230 mm Internal (W x H x D): 1200 x 1020 x 600 mm Electrical Data 400 V / 3N~ / 50 Hz Power: 13.0 kW Current: 22.5 A Protection Class: IP 20 Refrigeration System Refrigerant: R404A / R23 Stage 1: 4.00 kg Stage 2: 0.87 kg Two-stage refrigeration system Max. Operating Pressure: 29 bar Performance Data - Temperature Temporal temperature deviation: 0.1 to 0.5 K Spatial temperature deviation: 0.3 to 2.0 K Heating rate: approx. 4.8 K/min Cooling rate: approx. 4.0 K/min Heat compensation: approx. 5000 W Performance Data - Climate Climatic range: +10 °C to +95 °C Humidity range: 10% to 98% RH Temperature deviation: 0.1 to 1.0 K Heat compensation: approx. 800 W Ksdsy H H Smspfx Ab Tslt Features Touch control panel Programmable and constant operation modes Observation window Stainless steel test chamber Interior lighting Cable port Mobile on castors Robust industrial design Weight Approx. 635 kg Scope of Delivery Binder climate test chamber MKFT 720 E3.2 Scope of delivery as shown Service prior to delivery (optional) Functional test Refrigeration service Leak test Test run with protocol Condition Used. Condition as per images. Note Used equipment, sold without warranty. Inspection by appointment possible. Loading and transport can be arranged on request. Subject to prior sale and changes. If you have any questions, feel free to contact us.

Condition: excellent (used), ESPEC Climate Test Chamber PL-3KPH Device Data Manufacturer: ESPEC Model: PL-3KPH Design: Climate Test Chamber Cooling: Air-cooled Description Used climate test chamber from ESPEC. Suitable for temperature and humidity testing. For use in research, development, and quality assurance. Operating Condition Display: STOP / ready for operation. Technical Data Temperature range: -40°C to +180°C Humidity range: 20% to 98% RH Test chamber volume: approx. 400 liters Dimensions Internal (W x H x D): 600 x 850 x 800 mm External (W x H x D): 1010 x 1690 x 1195 mm Electrical Data 400 V / 3~ / 50 Hz Refrigeration System Refrigerant: R404A / R23 Two-stage cooling system Air-cooled (no external water connection required) Weight Approx. 350 kg Equipment Touchscreen control panel Programmable and constant mode operation BTHC temperature and humidity control Observation window Kedpfjy H H Iusx Ab Tjlt Stainless steel test chamber Internal lighting Cable port Overheating protection Hour counter Industrial design Scope of Delivery ESPEC Climate Test Chamber PL-3KPH Scope of delivery as shown Service before delivery (optional) Function test Refrigerant service Leak test Test run with protocol Condition Used. Condition as shown in photos. Note Used device, sale without warranty. Inspection possible by arrangement. Loading and transport can be organized upon request. Subject to prior sale and changes. If you have any questions, feel free to contact us.

Condition: excellent (used), Binder Temperature Cycling Chamber MK 115 E3.1 Device Data Manufacturer: Binder Model: MK 115 E3.1 Article number: 9020-0175 Design: Temperature Cycling Chamber Refrigerant: R404A (1.20 kg) Description Used temperature cycling chamber from Binder. Kedpfx Aboy H Hvlj Tolt Suitable for dynamic temperature tests and rapid temperature changes. Ideal for use in material testing, research, and quality assurance. Technology APT.line™ preheating chamber technology Natural simulation of temperature gradients High precision and reproducibility Features MCS controller with program memory Adjustable ramp functions Class 2 temperature limiter (DIN 12880) Heated viewing window with interior lighting Ethernet interface 50 mm pass-through (left) Stainless steel interior with shelf 4 castors (2 lockable) Technical Data Temperature range: -40 °C to +180 °C Fast temperature cycling (climate change operation) Chamber volume: 115 liters Dimensions External (W x H x D): approx. 980 x 1725 x 865 mm Internal (W x H x D): approx. 600 x 480 x 400 mm Electrical Data 400 V / 50 Hz Power: 3.5 kW Current: 11.0 A Pressure Data Max. operating pressure: 29 bar Weight Approx. 260 kg Condition Used. For visual and technical condition, refer to the pictures. Scope of Delivery Binder MK 115 temperature cycling chamber Shelf / chamber fittings Note Used equipment, sold without warranty. Inspection by appointment possible. Loading and transport can be organized upon request. Subject to prior sale and technical changes. If you have any questions, please do not hesitate to contact us.