Used Vertical Injection Molding for sale (9,733)

Year of construction: 2010, condition: ready for operation (used), A vertical injection molding machine Arburg with a horizontal injection unit is available. Clamping force: 800kN, opening stroke: 500mm, min. mold installation height: 250mm, platen distance: 750mm, platen dimensions X/Y: 570mm/570mm, max. mold weight: 600kg. Machine dimensions X/Y/Z: approx. 4300mm/1700mm/2100mm, weight: approx. 3500kg, operating hours: 44117h. Documentation available. On-site inspection is possible. Prjdpfx Aeyddy Usc Aob

Condition: excellent (used), Year of construction: 2007, clamping force: 1,000 kN, screw diameter: 40 mm, clearance between the columns: 420 mm, injection pressure: 1,865 bar, injection weight: 192 g, mold height (min.): 200 mm, ejector stroke: 100 mm, Year of manufacture: 2007 Injection shot weight: 192g Injection unit 410 Screw diameter: 40 mm Specific injection pressure: 1865 bar Injection volume: 217 ccm Injection shot weight: 192 g Screw L/D ratio: 20 Mold closing unit 100 Mold plate dimensions: 600x600 mm Distance between columns: 420x420 mm Ejector force: 35 kN Mold height: 200 mm Ejector stroke: 100 mm Weight: 5000 kg Control system: NC4 Tooling: - 2 x hydraulic core - pneumatic valve Psdezt I Rnspfx Ac Ajrb - Euromap 67 connector

Condition: excellent (used), Year of construction: 2008, Arburg OK-C S350-60 / Vertical injection molding machine with sliding table / Very good technical condition Year of manufacture: 2008 injection unit: screw diameter: 18 mm Pjdpfx Acozy Ibts Asrb injection weight: 18 g injection pressure: 2500 bar Dosing volume: 20 ccm Clamping unit: Clamping force: 35 t tie bar distance: 0x0 mm size of clamping platens: 295x395 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA - touch screen Additional equipment: Vertical injection molding machine with sliding table 3 stations on the sliding table Air valve x 4 Hydraulic core pull x 1 Control system with hot runners Injection unit hardened - bimetal Parallel movements Infrared protection curtains It is possible to change the screw diameter Dimensions: Weight: 2500 kg Length/width/height: 2.55x1.85x3.52 m All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: reconditioned (used), Year of construction: 2004, machine/vehicle number: 63237, clamping force: 350 kN, total length: 2,759 mm, total width: 886 mm, total height: 1,900 mm, overall weight: 1,310 kg, warranty duration: 6 months, Awaiting refurbishment at our headquarters in Northamptonshire is this Boy 35M injection moulding machine. Prjdpez Armfjfx Ac Ajb Any machines awaiting refurbishment (or undergoing refurbishment) with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest.

Condition: excellent (used), Year of construction: 2014, Arburg 370S 700-290 U-Version! Year of manufacture: 2014 Screw diameter: 40 mm Pedpfx Acjz E Hids Aorb Core pull: 1 Hot runner control valves: 6 Blow-out system: 1 Interface for coloring device

Condition: excellent (used), Year of construction: 2016, operating hours: 47,000 h, functionality: fully functional, machine/vehicle number: 141-100, clamping force: 3,700 kN, screw diameter: 70 mm, clearance between the columns: 710 mm, displacement volume: 1,175 cm³, injection pressure: 1,400 bar, injection weight: 1,060 g, mold height (min.): 300 mm, opening stroke: 710 mm, plate width: 1,070 mm, plate height: 990 mm, total length: 8,135 mm, total width: 1,890 mm, total height: 2,275 mm, overall weight: 16,000 kg, pump power: 107,000 W, Fully electric Negri Bossi injection moulding machine. Was operational in production until the end. Prsdpjyxpd Ajfx Ac Asb

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, clamping force: 500 kN, mold height (min.): 225 mm, ejector force: 300 N, overall weight: 2,450 kg, input voltage: 380 V, Equipment: documentation/manual, ARBURG 320 S in excellent condition, low operating hours, and with a Piovan dryer. Year of manufacture: 1998. Piovan dryer, model TDM604. Year of manufacture: 2005. Prjdpozxg Amjfx Ac Aeb Includes documentation. The machine is powered on for inspection.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, clamping force: 6,500 kN, screw diameter: 80 mm, clearance between the columns: 1,000 mm, displacement volume: 1,779 cm³, injection pressure: 1,855 bar, injection weight: 1,600 g, mold height (min.): 450 mm, ejector force: 96,000 N, ejector stroke: 300 mm, plate length: 1,450 mm, plate width: 1,350 mm, Clamping force: 650t Year of manufacture: 2005 Injection weight: 1600g Injection unit 3300 Psdpfx Acjz E Iq As Aerb Screw diameter: 80 mm Screw L/D ratio: 20 Specific injection pressure: 1855 bar Injection volume: 1779 ccm Injection weight: 1600 g Mold closing system Clamping force: 650 t Mold plate dimensions: 1450 x 1350 mm Distance between columns: 1000 x 900 mm Mold height: 450 - 950 mm Opening stroke: 930 mm Maximum plate distance: 1880 mm Ejector force: 96 kN Ejector stroke: 300 mm Control system: NC4 Equipment: - Hydraulic core pulls: 4 - Hydraulic cascades: 8 - Hot runner adjustment points (zones): 16 - Wittmann W 843 Pro robot, year 2021 (Z 3000 / Y 2000 / X 1200 mm, C-axis servo 180°, B-axis servo 270°) included

Condition: reconditioned (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 180398, clamping force: 1,200 kN, screw diameter: 35 mm, injection weight: 186 g, Now fully refurbished by our team at STV Machinery in Wellingborough, Northamptonshire is this high precision Engel Victory VC 500/120 injection moulding machine. This tie bar-less machine is fitted with the Engel Microprocessor controller and 35mm diameter screw, which gives a shot weight of 186 (PS)g. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prsdpezx Uc Ijfx Ac Asb Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest.

Condition: excellent (used), Year of construction: 1998, Ferromatik Milacron K110D-S/2F / 2K injection molding machine Year of construction: 1998 Injection unit: Screw diameter: 30 mm Injection weight: approx. 85 g Injection pressure: 2298 bar Dosing volume: 99 ccm Clamping unit: Clamping force: 110 t Distance between tie bars: 470x470 mm Size of the clamping platens: 740x740 mm Ejector: hydraulic Clamping unit: hydraulic Podpfx Aezy Iikoc Asrb Control system: Ferromatik Milacron Additional equipment: 2-component injection molding machine Euromap 67 Robot interface Hydraulic core pull x 4 Control system with hot runners Injection unit is wear-resistant and resistant to corrosion Screw diameter in the vertical injection unit: ⌀25 mm - approx. 43 g/hp The machine has been regularly serviced The service center recently replaced the machine's cylinder with screw and the hydraulic valves with new ones Dimensions: Weight: 6300 kg Length/width/height: 5.00x1.60x3.60 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 1998, clamping force: 80 kN, screw diameter: 38 mm, The Boy 80T In Very Condition The Machine Done Low Hours One Owner Used In Training Centre Prjdpfx Acoyhrqie Ajb

Condition: not inspected (used), Year of construction: 2012, functionality: unexamined, machine/vehicle number: 17659, total length: 11,000 mm, total width: 3,000 mm, total height: 2,600 mm, overall weight: 40,000 kg, Includes handling equipment, peripherals, and conveyor belt. A used machine is being sold as part of a site closure. Sale is made excluding any warranty for defects. Prsdpfx Acozrd Slj Aeb The machine has not been inspected but was in working order until the end.

Condition: used, Year of construction: 2024, MACHINE PROFILE: 3,800 kN (420 US tons) IMM ===== Machine ID: • Injection Unit: 265 • Clamping Unit: 380 • Weight: 21,300 kg Clamping Unit Specifications: • Force: 3800 kN (388 tons / 420 US tons) • Tie-bar Spacing: 830x830 mm • Platen Size: 1190x1190 mm • Stroke (Open/Eject): 700 / 210 mm Podjzzv Tgspfx Ac Ajrb • Ejector Force: 90 kN • Mold Height (Min/Max): 300 / 750 mm (+800 option) • Max Mold Weight: 3.8 tons • Dry Cycle: 2.3s / 500mm Injection Unit Specifications (By Screw: 25 / 30 / 35 mm): • L/D Ratio: 24 / 24 / 20 • Capacity: 74 / 106 / 144 cm³ • Rate: 98 / 141 / 192 cm³/s • Recovery Rate: 10 / 15 / 22 g/s • Pressure: 2700 / 2700 / 2000 bar • Stroke / Speed: 150 mm / 420 rpm • Nozzle (Stroke/Force): 305 mm / 40 kN • Heating Capacity: 9.2 kW

Condition: not inspected (used), Year of construction: 2002, functionality: unexamined, machine/vehicle number: 45719, total length: 9,000 mm, total width: 2,300 mm, total height: 2,500 mm, overall weight: 33,500 kg, Handling including linear robot. Automation is not included but can be purchased separately upon request. Automation is integrated; programming work may be required. For sale is a used machine from a site closure. Podpfjzrd Ugex Ac Asrb Sale is made excluding any warranty for defects. The machine has not been tested but was operational until the end.

Condition: ready for operation (used), Year of construction: 1997, functionality: unexamined, machine/vehicle number: 39951, overall weight: 13,400 kg, Includes linear robot and peripherals. A used machine from a site closure is being sold. Sale is made excluding any warranty for defects. The machine has not been tested but was operational until the end. Podpfx Acezrd Rue Ajrb

Condition: used, Year of construction: 1998, functionality: fully functional, machine/vehicle number: 173340, clamping force: 2,000 kN, screw diameter: 50 mm, clearance between the columns: 520 mm, plate length: 715 mm, plate height: 715 mm, total length: 5,360 mm, total width: 1,800 mm, total height: 2,200 mm, overall weight: 6,900 kg, Equipment: documentation/manual, ARBURG ALLROUNDER 520 C 2000-675, hydraulic injection molding machine for plastics, year of manufacture 1998. The machine has a clamping force of 2,000 kN (200 tons) and an injection unit with a 50 mm diameter screw. Technical data: Manufacturer: ARBURG Model: ALLROUNDER 520 C 2000-675 Year of manufacture: 1998 Clamping force: 2,000 kN / 200 tons Injection unit: 675 Screw diameter: 50 mm Distance between columns: 520 × 520 mm Platen size: approximately 715 × 715 mm Opening stroke: approximately 650 mm Control: SELOGICA Condition: The machine was dismantled in perfect working order and is sold in its current condition. Operating hours are not available. The machine is available for viewing/inspection by appointment. Sale includes the injection molding machine only. Prjdpozw Hnyefx Ac Aeb The Cartesian robot and other components of the cell can be purchased separately.

Condition: used, functionality: fully functional, Used KraussMaffei injection molding machine KM 65-160 C2, manufactured in 2002, with extensive temperature control and a separate Frigel Microgel process chiller. Manufacturer: KraussMaffei Type: KM 65-160 C2 Machine type: Injection molding machine Year of manufacture: 2002 Machine number: 641741 Order number: 646746/1 Clamping force: 650 kN / 65 t Machine weight: 3,200 kg Operating hours: 91,836:45 h Operating voltage: 400 V Phases: 3 Frequency: 50 Hz Total current: 153 A Motor current: 30 A Main fuse: 160 A Temperature control: Multiple temperature control circuits Part removal: Conveyor belt Process chiller manufacturer: Frigel Firenze S.p.A. Process chiller model: Microgel RCD80/12HP Prodpfx Acez Aln Aj Asb Year of manufacture of process chiller: 2012 Serial number of process chiller: 1205114 Voltage: 400 V Auxiliary voltage: 110 V Frequency: 50 Hz Max. current draw: 29 A Refrigerant: R407C Refrigerant charge: 2.4 kg Max. high pressure: 27 bar Max. low pressure: 19 bar Medium: Water Temperature range: -5 to +90 °C Max. pressure water circuit: 8 bar Weight: 240 kg Available from APRIL 2027

Condition: good (used), Year of construction: 2002, Selling this machine, immediately available. For further details, see the pictures. Prjdpszx D Hcsfx Ac Asb

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, clamping force: 150 kN, screw diameter: 18 mm, clearance between the columns: 220 mm, total length: 2,100 mm, total width: 800 mm, overall weight: 1,550 kg, Clamping force: 15t Year of manufacture: 2001 Predoz Egkuopfx Ac Aob Injection unit 30 Screw diameter: 18 mm Pump motor power: 5.5 kW Cylinder heating band power: 3.9 kW Tool clamping unit 150 Clamping force: 15 t Distance between columns: 220 x 220 mm Weight: 1550 kg Footprint: approx. 2100 x 800 mm Control system: Selogica ARBURG Allrounder 220 S 150-30, year of manufacture 2001 Equipment / condition: - Selogica control system with CF card reader - Clamping force 150 kN, injection unit 30, 18 mm screw (screw/cylinder inspected) - Very compact machine, footprint approx. 2.1 x 0.8 m – ideal for small parts - From a tool shop (trial molds and pre-production runs), little used in recent years - No peripherals (dryer and hopper available upon request)

Condition: good (used), Year of construction: 2002, functionality: fully functional, Clamping force: 500 kN Platen size: 540 x 540 mm Tool opening stroke: 350 mm Minimum tool mounting height: 200 mm Screw diameter: 30 mm Injection pressure: 2025 bar Displacement volume: 74 cm³ Opening width: 500 mm Ejector stroke: 100 mm Prsdpfx Aezg T I Ssc Ajb Total weight: approx. 2,300 kg

Condition: excellent (used), Year of construction: 2013, operating hours: 30,533 h, functionality: fully functional, clamping force: 900 kN, screw diameter: 30 mm, displacement volume: 106 cm³, plate length: 630 mm, plate height: 580 mm, total length: 4,000 mm, total width: 1,500 mm, total height: 2,200 mm, overall weight: 4,100 kg, Equipment: documentation/manual, BATTENFELD HM 90-210 Stock No.: 503672 Manufacturer: Wittmann Battenfeld Type: HM 90-210 Prjdpfxsz A A Hyo Ac Ajb Control System: UNILOG B6 Year of Manufacture: 2013 Operating Hours: 30533 h Technical Data - Clamping Unit Clamping Force: 900 kN Tie Bar Distance h x v: 420 x 370 mm Platen Size h x v: 580 x 630 mm Minimum Mold Height: 450 mm Maximum Mold Height: 925 mm Opening Stroke: 475 mm Ejector Stroke: 150 mm Ejector Force: 41 kN Centering of Moving Platen D: 125 mm Centering of Fixed Platen D: 125 mm Mold Weight: 800 kg Technical Data - Injection Unit Screw Diameter: 30 mm Injection Volume: 106 ccm Injection Pressure: 2042 bar Screw Length: 22 l/d Screw Stroke: 150 mm Screw Speed: 372 rpm Screw Torque: 490 N Free Injection Rate: 103 g/s PS Number of Heating Zones: 4 Nozzle Distance: 250 mm Dimensions & Weight Machine Dimensions L x W x H: 4m x 1.5m x 2.2m Total Weight: 4100KG Equipment Screen text in German CEE socket 16A CEE socket 32A Hydraulic core pull, 2x Air valve, 1x Leveling elements Plasticizing unit, highly wear-resistant and corrosion-resistant Screw drive with three-phase servomotor Ethernet interface EUROMAP 13 interface EUROMAP 67 Handling interface Interface for color dosing unit Interface for temperature control unit Schuko socket 10A Mold heating, 8x

Condition: good (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: X66931, clamping force: 6,600 kN, screw diameter: 98 mm, clearance between the columns: 900 mm, displacement volume: 3,885 cm³, injection pressure: 2,100 bar, This machine underwent a complete overhaul and was retrofitted in 2023. Pjdpfx Aszlrc Sec Ajrb

Condition: excellent (used), Year of construction: 2009, Arburg 420C 1000-350/150 / Production line with the Arburg Multilift H side robot / 2K machine Year of manufacture: 10.2009 Injection unit: Screw diameter: 45 mm Shot weight: 210 g Injection pressure: 1670 bar Dosing volume: 230 ccm Clamping unit: Clamping force: 100 t Tie bar distance: 420x420 mm Mold size: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional equipment: Production line with the Arburg Multilift H side robot 2K machine with rotary table Control system with air valve Hydraulic core pull x 2 Control system with hot runner Reinforced injection units – bimetal Proportional valves on injection units – precise injection The vertical injection unit – screw diameter: ⌀30 mm – 71 g/shot Rotary table available at an extra charge Side robot Arburg Multilift H Year of manufacture: 2009 5-axis robot: Z-axis with servo motor (electric); X, Y, B and C axes pneumatic Safety package for robots Robot with adapter, conveyor belt, protective housing Purchase of the robot and conveyor belt available at an extra charge Dimensions: Weight: 5210 kg All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request. Psdpfxszy Iz He Ac Asrb

Condition: used, Year of construction: 2005, operating hours: 124,424 h, functionality: fully functional, machine/vehicle number: 155134, clamping force: 1,500 kN, total length: 5,196 mm, total width: 1,704 mm, total height: 2,189 mm, overall weight: 9,500 kg, Equipment: documentation/manual, Technical condition: operational, used until the end of its production run. Regularly serviced and maintained. This machine is ideally suited for the production of plastic components. It features a robust design from a reputable manufacturer, ensuring reliable and precise operation. Predpfx Asz Eiafec Asb Additional information: The machine can be viewed by prior appointment. Technical documentation is available. Assistance with arranging loading is provided. Price: 35,000 PLN net / the price includes an ENGEL ERC 13/1-F robot, serial no. 155243, manufactured in 2005, installed on the machine.

Condition: good (used), Year of construction: 1992, Clamping force: 500 kN Screw diameter: 30 mm Prodpsvygh Nofx Ac Aeb Weight: 3,200 kg Available immediately from stock