Used Vertical Gear Hobbing Machine for sale (100,983)

Condition: good (used), Year of construction: 1990, operating hours: 90,000 h, functionality: fully functional, Reishauer RZ 801 Maximum module: 8 mm Minimum module: 0.5 mm Maximum gear diameter: 820 mm Maximum table load: 400 kg Maximum gear width for spur gears: 250 mm Minimum number of teeth: 10 Maximum number of teeth: 600 Maximum grinding angle: 30 degrees Total power requirement: 22 kW Machine length: 2,980 mm Machine width: 1,910 mm Machine weight: 7.6 t Cjdpfx Aexq R Ecjdxjhd Dressing device: Reishauer AM 10 included A few years ago, the machine was fitted with a compact, relatively new Reishauer AF filter filtration system (separator), and it also features a high-performance hydraulic system that is just a few years old. This is clearly visible in the photos. The machine operates flawlessly in two-shift operation and is only being replaced due to its age by a new machine. Measuring protocols dated October 5th are included as evidence. Video recordings of the grinding operation on the workpiece can be provided upon request via WhatsApp B2B. Flanges and grinding wheels may be included on a goodwill basis, but must generally be purchased separately.

Condition: used, Year of construction: 2008, max. wheel diameter 300 mm max. module 8 min. module 0,7 Control SINUMERIK 840 D min/max. pitch cone angle - 90 / + 90 ° workpiece spindle - bore 127 mm grinding wheel diameter 50 - 230 mm spindle speeds (infinitely variable) 7.500 U/min work piece spindle speed 700 U/min total power requirement 146 kW weight of the machine ca. 21 t dimensions of the machine ca. 9,5 x 3,6 x 3,1 m Measuring probefor tooth gap(integrated on the grinding head) External grinding spindle cooling system ELBARON oil mist extraction (integrated in the machine) Cjdpevxww Sofx Adxehd Hoffmann coolant filter system Was used for the serial production of spiral-toothed ring gears No clamping devices No grinding wheels / grinding wheel flanges No dressing wheels

Condition: used, Year of construction: 2012, turning diameter 140 mm turning length 630 mm control Siemens 840 SL max. swing diameter over bed 250 mm turning speed range - main spindle 0 - 5000 min/-1 max. torque 256 Nm spindle bearing diameter 110 mm spindle bore 52 mm spindle head Gr. 6 DIN 55026 chucking diameter max. 250 mm number of tool places 3 x 12 Pos. tool taper VDI 40 max. tool weight 20 kg max. tool diameter 40 mm max. tool length 95 mm max. workpiece weight 20 kg max. workpiece diameter 140 mm x-travel 300 mm Cedpoxqrgzofx Adxjhd z-travel 740 mm rapid traverse x 45 / z 30 m/min total power requirement 70 kW weight of the machine ca. 25,0 t dimensions of the machine ca. 6,5 x 3,5 x 4,4 m In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical features: - Siemens S120 drive systems - 3x turret, all places AGW, 2x of them with y - axis - 2x main spindle, 1x with tailstock - Spindles total 5 pcs. - Tool monitoring, Artis - Total electronic axes: 21 pcs. Accesories: - chip conveyor - Radio probe, Renishaw - Cooling unit - Infeed and outfeed conveyor - suction There are 2 identical machines available. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: excellent (used), max. wheel diameter 350 mm gear width 400 mm max. module 15 min. module 0,15 Control Klingelnberg workpiece weight 300 kg ical angle 0 - 90 ° centre distance 1000 mm Cedpfx Aexqrhxodxohd weight of the machine ca. 1,9 t dimensions of the machine ca. 2,3 x 1,8 x 2,4 m Fully automatic CNC-controlled gear measuring center for spur gears and other gears depending on the software. Equipment for internal gears. Software: - Spur gear, hob measuring, worm checking

Condition: used, 1 unit CNC vertical drilling machine YUANXING KT-200 Travel distances: X 850 mm, Y 600 mm, Z 240 mm, max. drilling diameter 40 mm, incl. machine vise, tool cabinet, workbench and various accessories, as per photos and inspection, self-dismantling required Color: grey Condition: used Payment method: advance payment by bank transfer Goods storage location: Hall 1/Enclosure Shipping: Collection only – no shipping offered for this item! Csdpsxrcdtefx Adxohd

Condition: used, Year of construction: 2001, max. wheel diameter 40 - 160 mm gear width 90 mm Control SIEMENS SINUMERIC 840D Gear shaving - / deburring machine +++++ Please note: Chsdpfx Adjl Sr Susxod The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 10111408, Jenoptik Opticline C314 – Optical Shaft Measuring Device Year of manufacture: 2008 Model: C314 Serial number: 10111408 Condition: Fully functional Category: Optical Shaft Measuring Device Availability: Immediately Location: Germany Calibration: 07/2025 according to DIN EN ISO 10360 and VDI/VDE 2617, certificate available Measuring range diameter: 140 mm Measuring range length: 600 mm Workpiece weight: 200 / 300 / 600 N Resolution diameter and length: 0.1 µm Resolution rotation: 0.0006° Diameter accuracy: 1.0 + D[mm]/200 µm Length accuracy: 2.6 + L[mm]/200 µm Repeatability diameter: 0.3 µm Repeatability length: 1.2 µm Software user interface: Turbo Optic 3 Software measuring module: BWMS4 Power supply: 230 V Measuring system dimensions: 700 x 840 x 1355 mm Dimensions with probe: 810 x 840 x 1355 mm Machine weight: approx. 155 kg Accessories weight: approx. 300 kg Accessories: Mobile table frame Manuals: available Technical documentation: available Loading options: Forklift compatible Maintenance status: Maintenance records for 2024 & 2025 available, inspection values without any findings, overall condition: very good Optical shaft measurement systems with multi-sensor technology and highest precision This measuring device is used for quality inspection of the following products: - Turned and precision-turned parts - Components for the automotive industry, e.g. electric motors, drivetrains, steering components, and turbochargers - Blanks and pressed components for the metalworking industry - High-precision parts for medical technology, e.g. implants, bone screws and surgical instruments - Components for injection and nozzle technology Chedpfjxqh Etex Adxjd - Components for the bearing industry - Parts for turbines and emergency power generators - Parts for the textile and printing machinery industry - Applications in the aerospace sector - Pneumatic and hydraulic components, e.g. pumps - Various electric motors, e.g. for fans, household appliances, positioning and drive systems

Condition: new, functionality: fully functional, Year of construction: 2025, Vertical Shaft Impact Crushers (VSI) stand out among rock crushing machines due to their high crushing efficiency and excellent particle shape production. Developed by CONSTMACH, these sand-making machines are used in the tertiary crushing stage to give cubic form to materials obtained from secondary crushers and to produce a high proportion of fine material. The system offers superior performance in processing all types of minerals and ores, as well as hard rocks such as basalt and granite. High-quality sand is produced from materials with a maximum feed size of 45 mm. Vertical shaft impact crushers allow you to easily obtain the desired product size for different material types thanks to their variable speed rotor system. It offers production capacity flexibility with a high reduction ratio, large feed hopper, and four different crushing chambers. In addition, high-chromium wheel shoes, anvils, and heavy-duty bearings ensure long life and low maintenance costs. The independent lubrication system and optional anvil replacement mechanism maximize uptime. Vertical Shaft Impact Crusher Technical Specifications Model: VSI-700-CR Maximum Feed Size: 35 mm Weight: 6,500 kg Motor Power: 110 kW Rotor Diameter: Ø700 mm Rotor Speed: 60–70 m/s Production Capacity: 60–100 t/h Model: VSI-800-CR Maximum Feed Size: 40 mm Weight: 12,000 kg Motor Power: 2 x 160 kW Rotor Diameter: Ø800 mm Rotor Speed: 45–60 m/s Production Capacity: 150–200 t/h Model: VSI-900-CR Maximum Feed Size: 45 mm Weight: 14,500 kg Motor Power: 2 x 185 kW Rotor Diameter: Ø900 mm Rotor Speed: 50–60 m/s Production Capacity: 200–250 t/h Model: VSI-1000-OR Maximum Feed Size: 90 mm Weight: 15,000 kg Motor Power: 2 x 200 kW Rotor Diameter: Ø975 mm Rotor Speed: 50–60 m/s Production Capacity: 250–300 t/h Why Choose CONSTMACH Vertical Shaft Impact Crushers? CONSTMACH is a globally preferred brand in the production of stone crushing machines and sand making machines with its engineering quality. Our vertical shaft impact crushers offer high performance, low operating costs, and long-lasting use. Our models, which can be customized to the production needs of each facility, provide the advantages of easy maintenance and high efficiency. CONSTMACH is always the right choice for businesses seeking quality, reliability, and sustainable production. What Do We Do at Constmach? Csdpexqgyvofx Adxshd Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: used, Year of construction: 2014, max. turning diameter 160 mm max. turning height 150 mm max. workpiece diameter 100 mm max. workpiece height 150 mm max. turning speeds 6.000 U/min travel -x axis 700 mm travel -z axis 375 mm c-axis 360 ° control FANUC Chedpfsqvd Iuex Adxsd Vertical Turning Machine | EMAG - VL2 equipped with a workpiece conveyor belt. The machine is in very good condition. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VL-2 | VL 2

Condition: used, Year of construction: 1988, machine/vehicle number: 14411, stroke length: 220 mm, table diameter: 730 mm, For sale is a Lorenz LS 630. A robust and precise machine, renowned for its high build quality. The machine requires technical refurbishment due to the control system, but is in very good mechanical condition. It can process components up to module 12. A stable and high-quality Lorenz LS 630 that can be made fully operational again with some effort. Chodpfxexrcmbs Adxsd

Condition: used, Year of construction: 2019, functionality: fully functional, total width: 800 mm, total height: 2,100 mm, total length: 1,130 mm, Vertical glass washing machine with a washing height of 1000 mm. This washing machine is designed for integration into the outfeed conveyor of glass edging machines with vertical transport. It is equipped with two washing brushes: the rear brush is fixed in position, while the front brush can be adjusted in width manually using a handwheel, allowing the cleaning of different glass thicknesses. The wash water is blown off the glass panes (front and back) using air nozzles and then collected in a reservoir. The machine can be operated either with fresh water or via a separate water tank. It is currently set up for operation with fresh water. Water tank and pump are not included in the price. Modifications to the outfeed conveyor of the glass edging machine may be required for installation. Assembly can be carried out by us upon request but is not included in the scope of delivery. The pictures show an identical washing machine already installed at other customers—such as in a Bottero 810 BCS or a Bodo Gerhard K300. The washing machine offered here is in used but good condition. It has been thoroughly inspected, cleaned, and fitted with new wear parts by us. Cedoxqmxxepfx Adxshd

Condition: good (used), Year of construction: 1980, Info: Machine was embedded in a pit! - Tractive force: max. 25,000 kg - Clearing stroke: max. 630 mm - Clearing speed: 1 - 10 m/min - Return speed: 7 - 25 m/min - Total connection requirement: 45 kW - Machine weight: 5,500 kg Chedoxr Aw Tepfx Adxod

Condition: good (used), Year of construction: 1979, functionality: fully functional, GLEASON 1979 Chsdpfxsxn Ul Io Adxod COMPLIANCE CHECK OK 2024 TOOLING PROVIDED POSSIBILITY TO LOAD MACHINE ONTO TRUCK LOADING NOVEMBER 2025

Condition: good (used), Year of construction: 1985, functionality: fully functional, Retrofit / overhauling in May 2005 (with geometric measurement): - New Heidenhain iTNC-530 control - New electronics - New Siemens servomotors - Heidenhain glass scales - Revision of drilling spindle unit (total costs 118,436.00 EUR) Technical details spindle diameter 135 mm x-travel 1000 mm y-travel 700 mm z-travel 300 mm cross rail adjustment - vertical 780 mm distance between table/spindle 1000 mm table surface area 1100 x 842 mm distance between columns 1100 mm table load 1500 kg tool taper SK 45 spindle turning speed range 2400 rpm spindle drive 5,9 kW feed range 1 - 6000 mm/min weight of the machine ca. 10,6 t Equipment: Infrared measuring probe m&h 38.10-MINI Electron. Handwheel Cjdpfx Adow Hxw Iexohd Various tool holders Transport dimensions: - Machine (LxWxH) 3500 x 2600 x 2750 mm - Control cabinet (LxWxH) 2300 x 600 x 2300 mm - Hydraulic (LxWxH) 800 x 600 x 1000 mm

Condition: used, Year of construction: 2014, max. turning diameter 160 mm max. turning height 150 mm max. workpiece diameter 100 mm max. workpiece height 150 mm max. turning speeds 6.000 U/min travel -x axis 700 mm travel -z axis 375 mm c-axis 360 ° control FANUC Vertical Turning Machine | EMAG - VL2 equipped with a workpiece conveyor belt. The machine is in very good condition. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Cedjqvd Iqopfx Adxshd #Tags: VL-2 | VL 2

Condition: good (used), Year of construction: 2005, functionality: unexamined, machine/vehicle number: 29406, Lot consists of: (1)CNC Gear Shaping Machine Position consists of: (1) CNC gear shaping machine Technical Details/Technical Details: English: Cjdpfx Adjv R Tmtsxohd max dia 130mm, max face width 25mm, min/max module 0.5-4, strokes 500 - 2,500 1/min, spindle dia 85mm, CNC Siemens Sinumerik 840D, 400V 50Hz 49kW, LxWxH 6.4x4.5x4.4m, weight 12to Parts Gantry System and/or Cranes are not included in the scope. German: max. diameter 130mm, max. face width 25mm, min./max. Module 0.5-4, strokes 500-2,500 rpm, spindle diameter 85 mm, CNC Siemens Sinumerik 840D, 400 V 50 Hz 49 kW, LxWxH 6.4 x 4.5 x 4.4 m, weight 12 tons Parts gantry system and/or cranes are not included in the scope of delivery.

Condition: new, The Servomill® FPK 600 is a state-of-the-art Conventional Vertical Milling Machine designed for precision and versatility, making it an indispensable tool in mechanical manufacturing, particularly for tools and molds. This machine features a compact design that enhances flexibility and ease of operation, blending modern technology with traditional milling techniques. Equipped with advanced electronics, including electronic stops and handwheels, the Servomill® FPK 600 allows users to experience the benefits of CNC technology without the need for programming. This ensures not only high precision but also efficiency in production and education settings. With robust ball screws in all axes and powerful servomotors, the machine delivers smooth, precise movements and rapid traversing. Operators will appreciate features like the easily accessible control panel, automatic feed with programmable limit stops, and comprehensive standard equipment, including a coolant system, LED work light, and an extensive tool package. Trust in KNUTH's commitment to quality and reliability, and elevate your machining capabilities with the Servomill® FPK 600. Explore the advantages of this Conventional Vertical Milling Machine by requesting a quote today! Codpsxb Dwgsfx Adxohd

Condition: good (used), Year of construction: 2004, - Tractive force: max. 160 kN - Clearing stroke: max. 1000 mm - Truck feed stroke: max. 630 mm - Table top width: 630 mm - Broaching speed: 10 m/min - Return speed: 23 m/min - Installed power: max. 88 kW - Machine weight: 12,410 kg Chedpfx Adexr Aw Hjxed

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, Gear grinding machine Gleason Pfauter G320 CNC + Promot Automation - Gear grinding machine Manufacturer: Gleason Pfauter G320 + with Promot Automation handling unit Type: G 320 Control unit: Siemens 840 Incl. control panel Year of construction: 10/2001 Module: 0.5-7.0 Min. workpiece diameter: 10 mm Max. workpiece diameter: 380 mm Number of teeth: 10-600 Vertical slide stroke “Z“: 200 mm Horizontal slide stroke “X“: 230 mm Tangential slide stroke (SHIFTING) “Y“: 135 mm Swivel angle of clamping head “A“: +-45° Stroke – tailstock center [ ]: 125mm Tangential slide stroke – dressing [ ]: “V“ 180mm Radial slide stroke – dressing [ ]: “U“ 110mm Rotation speed – grinding wheel in processing [ ]: 3000rpm max - infinitely variable Edge speed – linear axes [ ]: 10000 mm/min Max. table rotation speed [ ]: 240 RPM Table resolution [ ]: 0.001° Processing feeds [ ]: infinitely variable Working feeds [ ]: infinitely variable Grinding wheel dimensions Min/Max. diameter [ ]: 270/350mm Width [ ]: 104mm/max. Bore [ ]: 160mm System weight [weight]: 11,500kg Accessories [accessories]: as per photos +Promot-Automation +Conveyor belt +Cooling belt system +Hydraulic unit Space requirement for machine [needed space ]approx. (W x D x H): 3.7m x 2.4m x 2.75m Space requirement for Promot Automation [needed space ]approx. (W x D x H): 4.5m x 1.6m x 4.0m Complete documentation is available. Functionality and machine features: Cylinder grinding machine with 8 numerically controlled axes for machining gears with straight and helical gears that can be produced by rolling, including a dressable worm profile disk. Linear and rotary main axes are designed to be hydrostatic. High-performance machine for finishing cylindrical gears with straight or helical involute teeth. Inspection under power can be arranged at short notice. If you have any further questions, please do not hesitate to contact us. Price, ex warehouse here plus VAT Chjdpfju Sqgqjx Adxjd Condition: good - ready for demonstration Delivery: ex warehouse - as viewed Payment: net - after receipt of invoice Subject to prior sale, errors excepted. We ask for your order. Other machines and systems available from stock - please enquire. We look forward to hearing from you.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Technical details max. workpiece diameter 400 mm workpiece length - max. 300 mm Control SIEMENS 840Dsl swing diameter 520 mm chucking diameter 500 mm travel x / y / z 995/+,-30/580 mm Additional information Operating hours (total): 1848 hours Codew Hxuaopfx Adxehd 1.2.2 BASE TURRET UNIT AND Y-AXIS SLIDE UNIT The Y-axis slide unit is mounted on the side of the machine base. A fast-reacting, position-controlled, and maintenance-free servo motor is used for the axis drive. It drives the slide via a high-precision ball screw. A linear measuring system is built into the Y-axis. Positional accuracy: 2 µm. BASE TURRET UNIT Shortest swivel times thanks to direct swivel drive, cooled for consistent accuracy. MAIN SPINDLE 37.7 KW 1.2.3 HP TURRET DRIVE UNIT FOR DRIVED MACHINE TOOLS (C442) With internal coolant supply to the tool.* Max. speed 6,000 rpm Crosscut speed 3,200 rpm Torque at 100% duty cycle 54 Nm/18.1 kW Torque at 40% duty cycle 83.6 Nm/28.0 kW Torque at 10% duty cycle 100 Nm/33.5 kW 1.2.4 TOOL CARRIER UNIT FOR DRIVED TOOLS TOOLS, 12xBMT75 for BMT75 tool holders 1.2.6 ROTATING WORKPIECE TRANSPORT SYSTEM, O-TYPE Drag frame system for 10 workpieces Max. workpiece height (including workpiece pallet) 300 mm Max. workpiece weight 60 kg 1.2.7 SET (10 pieces) DRAG FRAME for O-type belt For workpiece diameters 150 - 400 mm 1.2.8 BLOW-OFF OF THE WORKPIECE AND THE CLAMPING DEVICE (PICK-UP) 1.2.10 COOLANT SUPPLY 15 bar Coolant pump flow rate approx. 80 l/min at 15 bar. COOLING UNIT (6.5 kW, water-air) A cooling unit (with dual-circuit technology) regulates the machine's thermal balance. The spindle drive, control cabinet, and turret are kept at ambient temperature (10°C - 40°C). Cooling capacity: 6.5 kW 1.2.11 COOLANT DOUBLE FILTER, MANUALLY SWITCHABLE Filter fineness 100 µm, with electrical and mechanical contamination indicator 1.2.12 CHIP CONVEYOR, HINGED BELT VERSION - REAR-FACING Chip discharge height 1100 mm. /With integrated coolant reservoir, capacity approx. 500 l. 1.2.13 EMULSION MIST EXTRACTION Extraction capacity approx. 800 m3/h 1.2.14 FLUSHING GUN 1.2.16 WORKPIECE MEASUREMENT with a measuring probe that is completely protected from chips and coolant outside the work area. 1.2.17 BLOW-OFF PROBE 1.2.19 ENGRAVING SOFTWARE PACKAGE 1.2.20 TOOL LIFE MONITORING - SISTER TOOL MANAGEMENT 1.2.21 TOOL BREAKAGE MONITORING TOOLINSPECT MCU - EUROPE (SIEMENS 840DSL, FANUC 31i/32i) 1.2.23 3-COLOR INDICATOR LIGHT 1.3.2 AXIAL DRILLING AND MILLING HEAD - BMT75 CC 1.3.3 ANGLE DRILLING AND MILLING HEAD 90° - BMT75 CC (i=1:1) 1.3.4 TOOL SET FOR OP10 + OP20 1.3.7 HYDRAULIC FULL-CLAMPING CYLINDER SIZE 150 - with 1 media feedthrough The coolant is supplied to the workpiece through the main spindle and the clamping device. 1.3.10 3-Jaw Power Chuck KNCS-N 500-155 Quick Change n max. = 2200 rpm (Recommended speed according to DIN 6386) - Set of hard base jaws - Set of soft top jaws 1.3.11 Attachments for KNCS-N 500-155 Consisting of: - Chuck flange DIN 55026 A11 - Drawbar adapter with through-hole and shut-off valve for central air or coolant supply - Mounting screws 1.3.12 Irrigation nozzle in chuck bore Additional tool holders with tools

Condition: used, Year of construction: 2021, Thimonier 250ml Bleach Sachet Vertical Form, Fill & Seal Machines (2x 2021) with Chillers comprising Thimonier THB9200 thermal sachet vertical form, fill and seal macines (2x 2021) Eurocold 20-CB-00253 fluid chillers (2x 2022) Chedpfx Aoxn Rufjdxsd Note, only two of the three Thimonier FFS pictured are available Note Images have been edited to remove branding.

Condition: ready for operation (used), Year of construction: 2010, Main Drive Number of axis 3 This 3-axis GEHRING L2-630 vertical honing machine was manufactured in 2010. It features a 6-station rotary table, two honing stations, two measuring stations, and a brushing station. Fully automated with a robot feeder, consider the opportunity to buy this GEHRING L2-630 vertical honing machine. Contact us for more information. Application Types Codpfx Adoxnr I Hsxshd Honing

Condition: new, The UWF 5 is a state-of-the-art universal milling machine that falls under the category of Conventional Vertical Milling Machines and is part of the Universal Milling Machines product group. This top model in the UWF series boasts a large work area of 1325 x 360 mm and supports a table load capacity of up to 500 kg, making it ideal for both repair shops and production departments. Constructed with a robust machine bed from high-strength HT-200 cast iron and precision-ground guideways, it ensures long-term accuracy and wear resistance. The universal cutter head can swivel on two planes, allowing for quick changes between horizontal and vertical machining, while the powerful servo axis motor enables finely stepped motorized feeds in all axes. Additionally, the 5.5 kW main drive guarantees high torque, significantly enhancing productivity and offering features like a 3-axis position indicator and a user-friendly control panel. With extensive standard equipment, including a coolant system and tool storage, the UWF 5 is built for ease of use and maintenance-free operation. For those interested in enhancing their machining capabilities, request a quote for this impressive milling machine today. Chedsp Aucwspfx Adxsd

Condition: ready for operation (used), Year of construction: 2013, Main Drive Number of axis 3 Main Drive Number of axis 3 This 3-axis GEHRING L2-630 was manufactured in 2013. It features a 6-station rotary table, including 2 honing stations, 2 measuring stations, and 1 brushing station, all automated. Ideal for precision honing applications. Contact us for more information. Cjdpfxsxnr Iye Adxjhd Application Types Honing

Condition: ready for operation (used), Year of construction: 2014, operating hours: 48,973 h, Control Unit Brand SIEMENS Model 840 D Main Drive Tool taper IMS 76 Number of axis 3 This 3-axis DMG MORI CTX Beta 800 4a was manufactured in 2014. It features a Siemens 840 D control system, a counter spindle, and a bar machine package for enhanced versatility. The machine includes a 980-liter coolant system and a hinge type conveyor for efficient operation. If you are looking to get high-quality turning and milling capabilities, consider the DMG MORI CTX Beta 800 4a machine we have for sale. Contact us for more information about this machine. Cjdpfxoxpytgs Adxshd Application Types Turning