Used Vertical Gear Hobbing Machine for sale (71,371)

Condition: used, Year of construction: 1985, max. wheel diameter 80 mm gear width 150 mm max. module 2,5 min. module total power requirement 10 kW weight of the machine ca. 2400 kg M I K R O N (Switzerland) Fully Automatic Gear Hobber for Worm Gears Model A 33 / 1 Year 1985 Ser.-No. 14.06/14.07/14.15 _____ max. gear- without feed magazine approx. 80 mm max. gear- with feed magazine approx. 50 mm Module max. 2, / 2,5 Axial milling length approx. 150 mm max. workpiece-mounting length approx. 200 mm Bsdpfxot Hw D Rs Ap Ieww Milling slide can be swivelled up to 90 degrees Milling cutter - 24 - 50/63 mm Max. radial distance of milling slide 0-14/18 mm Milling cutter adjustment max. 25 mm Milling cutter speed 212 - 2.000 rpm Axial feed range infinitely adjustable 0,05 - 4,0 mm/workpiece rotation radial infinitely adjustable 0,2 - 200 mm/min. Milling spindle drive 3 kW Total electrical load approx. 10 kW - 50 Hz - 380 Volt Weight approx. 2.400 kg Accessories/Special Features: " Fully automatic operation cycle and minimum idle times due to programmable SIEMENS Program Controls S 5 for all machining steps i.e. rapid gear, feed, milling cutter on/off for the loading device, tailstock, possibly shifting, etc. with unit counter, program numbering including 30 different numeric error displays Pneumatic workpiece-loading and unloading facility parallel to work piece axis upright for rod workpieces approx. 140 mm long x 8 mm , including pneumatic double gripper for loading and unloading of work pieces. Raw parts are inserted into change cassettes externally and then placed into the loading device. The double gripper places the parts between workpiece spindle and tailstock, the tailstock spindle sleeve pushes the parts in the main spindle collet and clamps them simultaneously. The finished parts are ejected from the main spindle, then placed back again into the finished parts cassette by the gripper. The whole process is electrically monitored and checked. The complete loading facility is encased by plexiglass. " Hydraulic work piece clamping device including collets and hydraulic ejector " separate cooling system with magnetic separator * separate hydraulic system * various change gears This machine is set up for worm gears/armature shafts that can be used for adjustable car seats, window lifters, etc.

Condition: used, Year of construction: 2003, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, overall weight: 8,300 kg, spindle speed (max.): 36,000 rpm, number of slots in tool magazine: 30, Equipment: chip conveyor, Machining Center - Vertical Manufacturer: MIKRON Type: HSM 800 Year of manufacture: 2003 Control system: Heidenhain iTNC 530 Technical specifications: X-axis: 800 mm Y-axis: 600 mm Z-axis: 500 mm Spindle speed: 36,000 rpm Bwsds Ah Ic Iopfx Ap Isw Number of tool stations: 30 Machine weight: approx. 8,300 kg Condition: used Technical features & accessories: - Workpiece magazine - Chip conveyor - Oil mist/air filtration system - Water cooler Accessories, tools, and clamping devices shown are included in the scope of delivery only if explicitly stated in the additional information. Subject to modifications and errors in the technical data and specifications; prior sale reserved!

Condition: used, Year of construction: 1997, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Travel ranges X-axis: 710 mm Y-axis: 630 mm Z-axis: 500 mm Spindle and tool holder Spindle speed: 5–5,000 min⁻¹ Drive power of the working spindle: 11 kW Tool holder: SK 40 Tool changer Tool changer: 44 tools Feed rate Feed rate: 10 m/min Work table Clamping area: 1,200 × 600 mm Table load: 0.5 t Control system Control system: Heidenhain TNC 426 Performance data Total power requirement: 15 kVA Machine weight: approx. 4.24 t Machine design Guideways: Flat guideways on all axes Guideway protection: Scrapers and steel covers EQUIPMENT Tool changer with 44 tools Heidenhain TNC 426 control system Wired Heidenhain handwheel Flat guideways on all axes Scrapers on the guideways Steel covers for guideway protection Bsdpe Aa Aqtjfx Ap Ioww

Condition: used, Year of construction: 2000, travel distance X-axis: 4,000 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain TNC 430M, overall weight: 12,000 kg, No minimum price – guaranteed sale to the highest bidder! Bwsdpfj Ah Dryox Ap Isw TECHNICAL DETAILS Travel range X-axis: 4,000 mm Travel range Y-axis: 550 mm Travel range Z-axis: 600 mm MACHINE DETAILS CNC control: Heidenhain TNC 430M Tool holder: ISO 40 Tool magazine: 22 tool positions Note: The machine is sold without tools.

Condition: ready for operation (used), Year of construction: 2002, operating hours: 8,676 h, functionality: fully functional, HURCO VMX 30 – CNC Vertical Machining Center with LEHMANN Dividing Table Manufacturer: HURCO Model: VMX 30 Year of Manufacture: 03/2002 Control System: HURCO Ultimax Machine Type: CNC Vertical Machining Center Technical Data X-axis: 760 mm Y-axis: 510 mm Z-axis: 610 mm Rapid Traverse X/Y/Z: 30/30/20 m/min Table Dimensions: 1,020 × 510 mm T-slots: 5 × 18 mm T-slot spacing: 100 mm Maximum Table Load: approx. 1,000 kg Spindle Speed: up to 10,000 rpm Spindle Drive Power: approx. 11 kW Tool Holder: SK40 Automatic Tool Changer 24 tool positions Tool holder SK40 HURCO Ultimax Dual-screen control system Special equipment CNC-controlled dividing table from LEHMANN Fully integrated into the HURCO control system Bwedpfx Aj Agwx Nsp Iow Control directly via the CNC control system Fully functional Machine Dimensions and Weight Machine Weight: approx. 4,700 kg Machine Height: approx. 2,775 mm Footprint: approx. 3,870 × 4,170 mm including work area Condition and Scope of Delivery The machine is in used condition, commensurate with its year of manufacture, and shows visible signs of wear. Technically, the machine is fully functional. All existing machine functions, as well as the integrated LEHMANN dividing table, are functioning perfectly. The machine is sold including the LEHMANN dividing table. Not included in the scope of delivery: The clamping devices and clamping elements visible in the pictures Tools and tool holders The machine is suitable for single-part production as well as for small and medium-sized series. The machine can be viewed by appointment. The machine is expected to remain powered and available for demonstration until mid-calendar week 46/2026 (approx. November 11, 2026). An inspection and functional test while powered is possible within this period by arrangement. All technical specifications are without guarantee. Subject to prior sale.

Year of construction: 1940, condition: used, Automatic universal gear hobbing machine for manufacturing spur gears and helical gears. Largest milling diameter: 120 mm Smallest milling diameter: 5 mm Bwjdpfekw T Rmex Ap Iow Smallest tooth pitch: Module 0.30 Largest tooth pitch: 2 mm Largest milling length: 100 mm Complete with all accessories.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Vertical machining center Manufacturer: DMG Type: DMC 100U duoBLOCK Year of manufacture: 2006 Control system: Siemens 840D ShopMill Axes: 5-axis simultaneous Travel ranges: X: 1000 mm Y: 1000 mm Bwodpfxj Ahg Tmo Ap Ijw Z: 1000 mm - NC rotary table with pallet changer, 2 pallets 1000mm x 800mm, rotating pallet changer - Controlled B-axis with geared spindle SK50, 8000 rpm, milling head with gearbox, repaired by DMG in 03/2025 - Tool magazine, 60 positions - Coolant tank, 980L, 40 bar/80bar - Flushing gun - Electronic handwheel - Operating mode 4 Errors and prior sale excepted.

Year of construction: 2022, operating hours: 1,500 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 0070, We are selling a virtually new vertical universal brush tufting machine. The machine was manufactured by WOMAtec in 2022 and has seen very little use. Technical specifications: Type: DANY 1.0 Stroke: 70 mm Filament length: max. 150 mm Filaments: synthetic, bristles, and natural fibers, wire filaments and abrasive filaments Filament box: 1 color, needle dividing system Tufting tool: none Performance: approx. 100 cycles per minute Operating mode: intermittent operation and continuous operation Operation via foot switch Consisting of: ■ solid, welded steel frame ■ powerful main drive ■ wire spool and wire feed ■ filament box with pressure plate ■ durable tufting tool ■ loop tufting system with needle divider Bwjdpfszzwxwjx Ap Ijw ■ adjustable table for flat brushes Table for cup or roller brushes available upon request ■ painted in Prussian blue RAL 5010, light gray RAL 7035

Condition: used, Year of construction: 1995, max. wheel diameter 80 mm gear width 120 mm max. module 3 min. module 1 control SIEMENS 840 C total power requirement 30 kW weight of the machine ca. 7500 t dimensions of the machine ca. m L I E B H E R R CNC – Controlled Gear Hobbing Machine Type LC 82 Baujahr 1995 Ser.-Nr. 0836 _____ Gear-Diam. max. 80 mm Module Range 1 - 3 Helix Angle +/- 45 ° Distance Table Center to Tool Center 15 – 160 mm Hobbing Head Slide stroke vertical 250 mm Tangential Travel / Shift Travel of Tool slide 180 mm Minimum Number of Teeth 3 (!) Hob Size max. Ø x length approx. 90 - 200 mm Taper of Hob spindle HSK 50 A Workpiece Clamping length (table/Tailstock) 250 mm Infeed rates axial/radial/tangential/ 20/4/5/ mm/WP rev. Hob speed steplessly adjustable 0 – 800 rpm Hob Spindle Drive 8 kW - Bjdpfxjt Hw R Ds Ap Ijww Total Load approx. 30 kW - 400 V – 50 Hz Total weight of Machine approx. 7.500 kg Special attachments / accessories: • SIEMENS - CNC-Control Model 840 C for 6 axis (i.e. Hob drive/table drive/ swivel angle of hob head/ Radial axis/Axial Axis/ Tangential Axis ) with a surface especially designed for the gear manufacturing with error display function. • Automatic and contactless tooth meshing device to adjust the hob into workpiece. • Automatic Shifting of hob slide. • Automatic Workpiece handling system Model SSL for high speed loading and unloading of Workpieces, consisting of a steel chain3,, for workpiece carriers and 3-fold WP-Gripper for blanks, for the machining position and for unloading of finished parts onto the steel band. Actual Workpiece size to be machined: approx.. Ø 30 x 120 mm length, helix gear sprocket. Clamping of workpiece between centers by a mechanical, cam controlled quill in tailstock. • complete workarea protection with one sliding door, chip conveyor, small coolant device, oil dust Absorber, WP Carrier, etc. The Machine can be also used for dry cutting. Condition : Satisfactory to Good . Machine can be inspected under power here in stock. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: excellent (used), Year of construction: 2020, operating hours: 6,403 h, functionality: fully functional, travel distance X-axis: 3,048 mm, travel distance Y-axis: 813 mm, travel distance Z-axis: 762 mm, nominal power (apparent): 35 kVA, controller model: Haas NGC-Steuerung, total height: 3,300 mm, total length: 7,400 mm, total width: 2,600 mm, table load: 1,814 kg, overall weight: 13,500 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 22 W, number of spindles: 1, number of slots in tool magazine: 51, input voltage: 400 V, type of input current: AC, Equipment: chip conveyor, documentation/manual, HAAS VF-10/40 – CNC Vertical Machining Center – Year of Manufacture 2020 High-performance CNC vertical machining center with a large work area, a 15,000 RPM high-speed spindle, and a side-mounted tool changer with 50+1 magazine positions. The machine features a modern HAAS NGC control system with numerous activated functions, including high-speed machining, macro programming, rigid tapping, and rotation/scaling. Technical Data: • Manufacturer: HAAS • Model: VF-10/40 • Year of Manufacture: 2020 • Control System: HAAS NGC (Next Generation Control) • X-axis Travel: 3,048 mm • Y-axis Travel: 813 mm • Z-axis Travel: 762 mm • Table Size: 3,048 × 711 mm • Maximum Table Load: 1,814 kg • T-slots: 5 × 16 mm • Spindle Speed: 15,000 RPM • Spindle Power: 22.4 kW • Tool Holder: BT40 • Tool Magazine: 50+1 positions • Tool Changer: Side-mounted tool changer • Coolant Tank: 360 liters • Through-spindle coolant (TSC): Activated via control system • Power Supply: 400 V / 50 Hz / 3 phases • Machine Weight: approx. 13,654 kg • Shipping Dimensions (L × W × H): approx. 7,320 × 2,600 × 3,380 mm Control System and Equipment: • HAAS CNC control system with widescreen monitor • High-speed machining • Macro programming • VPS – Visual Programming System • Rotation and scaling • Rigid tapping • M19 spindle orientation Bwodpj Ahyvyjfx Ap Isw • Fourth axis activated via control system • Coolant supply through the spindle activated via control system • Extended program memory: 1 GB • Correction tables • Media display Operating Hours (as of October 30, 2026): • Power-on hours: 15,717 h • Cycle start hours: 6,403 h • Feed hours: 3,735 h • Tool changes: 127,433 • Spindle hours: Not listed separately Technical specifications based on available information and control system photos. Model designation and individual equipment features subject to confirmation. Errors, changes, and prior sale are subject to change.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 19991798, travel distance X-axis: 2,500 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 550 mm, controller manufacturer: Heidenhain, TECHNICAL DETAILS Travel range, X-axis: 2,500 mm Travel range, Y-axis: 800 mm Travel range, Z-axis: 550 mm Spindle mount: SK 50 MACHINE DETAILS CNC control: Heidenhain Voltage: 400 V Frequency: 50 Hz Total connected load: 40 kVA Weight: 2,000 kg EQUIPMENT Siemens motors and servo drives Preparation for 4th axis (4th axis not included) Bwsdpfx As Ahm Eysp Iew Note: Without tools and clamping devices for the machine table & without mist extraction.

Condition: used, Year of construction: 2000, travel distance X-axis: 1,250 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 750 mm, controller model: Fanuc 16i-M, spindle speed (max.): 4,000 rpm, TECHNICAL DETAILS X-axis travel: 1,250 mm Y-axis travel: 700 mm Z-axis travel: 750 mm Distance from spindle nose to table: 100–850 mm Rapid traverse rate X/Y/Z: 15 m/min Spindle speed: 4,000 rpm Spindle power: 26 kW Bjdpfx Ape Agfr Es Isww Spindle interface: ISO 50 / DIN Number of pallets: 2 Table size: 650 × 1,400 mm Table load: max. 1,500 kg Magazine type: Chain magazine Number of tool positions: 41 Tool diameter: max. 120 mm Tool diameter with free adjacent positions: max. 200 mm Tool length: max. 400 mm Tool weight: max. 20 kg MACHINE DETAILS High-pressure coolant pressure: 30 bar CNC control: Fanuc 16i-M Dimensions & Weight Machine weight: 16,750 kg Overall dimensions: 7,135 × 5,300 × 3,426 mm EQUIPMENT Gear change Chip conveyor

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, travel distance X-axis: 140 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 300 mm, workpiece length (max.): 400 mm, The design of the basic machine is characterized by the following features: - Horizontal arrangement of the workpiece spindle; vertical arrangement of the milling spindle or milling head - The workpiece is held between the workpiece spindle housing (left) and the tailstock (right) - The radial slide is mounted on the base (X-axis) - The axial slide moves on the radial slide (Z-axis) - The swivel milling head is equipped with an automatic angular adjustment (A-axis); the swivel slide (Y-axis) moves tangentially to the workpiece diameter TECHNICAL DETAILS Travel range, X-axis: 140 mm Travel range, Y-axis: 100 mm Travel range, Z-axis: 300 mm Tailstock travel, W-axis: 420 mm Swivel angle, end mill head, A-axis, left: 50° Swivel angle, end mill head, A-axis, right: 60° Largest module that can be milled with involute cutters according to DIN 8002: 4.5 mm Largest module that can be milled for high-performance milling: 3.0 mm Number of teeth: 2–999 Workpiece diameter with manual loading: max. 200 mm Workpiece diameter with automatic loading: max. 150 mm Workpiece length: max. 400 mm Bwedpfx Aezwmyiop Iow Milling spindle speed range, B-axis: 0–1,500 rpm Workpiece speed, C-axis: 0–350 rpm Milling tool data Milling tool diameter: 40–102 mm Milling tool length: max. 230 mm Radial front diameter (standard): 16–32 mm Milling coordinates Z-axis: 100–400 mm X-axis: 130–150 mm Y-axis (face of milling spindle): 50–230 mm W-axis (face of tailstock spindle): 165–585 mm Feed rate, X-axis: 3,500 mm/min Feed rate, Z-axis: 3,500 mm/min Feed rate, Y-axis: 4,000 mm/min Feed rate, W-axis: 5,500 mm/min Feed rate, V-axis (portal loader): 80,000 mm/min EQUIPMENT IBH control system Loading device A wide range of accessories

Condition: used, Empty weight: 8.700 kg Dimensions (LxBxH): 90 x 72 x 110 cm Serial number: 98077 Control system: Mazatrol M32B X-axis: 1050 mm Y-axis: 510 mm Z-axis: 560 mm Work table dimensions: 1300 × 550 mm Maximum load: 1,500 kg Spindle: Taper: BT50 / CAT50 Speed: 25 – 6,000 rpm Power: 15 kW / 18.5 kW (peak) Tool changer: 1 Capacity: 30 tools Weight: 8,700 kg Power supply: 380 volts Overall dimensions: 3,000 × 3,800 × 2,250 mm Includes: Matching tool cabinet with various tool holders Tool cabinet dimensions: 900 x 720 x 1100 mm Online auction of metalworking machines, woodworking machines, overhead cranes, workshop equipment, and lumber inventory, including an AMADA Arcade 210 CNC punch and nibbler, MAZAK VTC-41L and MT-V-515 vertical CNC machining centers, MAZAK Super Turbo-X 48 Mk II CO₂ laser cutting machine, BYSTRONIC Byjet 4022 CNC waterjet cutting machine, TECNOMA profiling and roll forming machines, ELUMATEC and EMMEGI aluminum sawing machines, HACO ERMS 200-metric-ton CNC press brake, ADIRA CNC press brake, LEFORT C 265T hydraulic scrap baler/shear combination, ESAB Pegasus CNC plasma cutting machine, GEMA powder coating machine with drying oven and exhaust system, EURO-MAC punching and nibbling machine, various KONE and DEMAG overhead cranes, VECOPLAN industrial shredder, NEDERMANN filter unit, METORA band saw, various metalworking and woodworking machines, panel saws, edge banders, milling machines, drills, compressors, workbenches, teak beams, sawn logs, and various accessories, etc. The online auction opens Wednesday 14 October and closes Tuesday 24 November. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Tuesday 17 November Bwodsz R S Tujpfx Ap Isw Pickup days are on: - Tuesday 1 December - Thursday 3 December Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: used, Year of construction: 2011, 2011 Kitamura Mycenter HX800iL Twin Pallet CNC Horizontal Machining Center With Fanuc Series 16i-MB Control Pallet Table Dimension 800 x 800mm (Sub Table 1,000 x 1,000mm (7 'T' Slots). Maximum Component Dimension 1,500 x 1,500mm. Maximum Table Load 1,500kg. Axis Travel 'X'=1,400mm, 'Y'=1,250mm, 'Z'=1,325mm, 'B'=360° (0.001° Increments). Rapid Traverse 'X=50m/min, 'Y'=50m/min, 'Z'=50m/min, 'B'=8°/min. Maximum Spindle Speed 8,000rpm (40kW Motor). 50 Position ATC. Spindle Taper BT50. Maximum Tool Ø125mm, Maximum Tool Weight 30kg. Power Requirement 70kVA. S/No. 48036 (2011). Sale includes2 x 1mtr. tables as pictured. Bwedpfxs Ahg Rrj Ap Isw With Through Spindle Coolant System, Dual Auger To Hakusan Chip Conveyor, Cleanmist CM 2300/3 Oil Mist Extraction Unit (With Spare Filter), Oil Chiller, Additional Sub Plate 1,000 x 1,000mm, Renishaw OMP60 Spindle Probe, Hand Wheel & Manuals.

Condition: reconditioned (used), Haas VF-4 CNC Vertical Machining Centre (2015) Haas CNC control X-axis travel: 1,270 mm Y-axis travel: 508 mm Z-axis travel: 635 mm Table size: 1,321 × 457 mm Bsdpfx Apo Agn Dvs Isww Maximum table load: 1,588 kg Standard spindle speed: 8,100 rpm Maximum spindle power: 22.4 kW / 30 hp Spindle taper: 40 taper Automatic tool changer: 20-station carousel Rapid traverse rates: 25.4 m/min Spindle nose to table: 102–737 mm Supplied With: Haas rotary 4th-axis unit with three-jaw chuck, Matching Haas tailstock, Swarf auger and discharge chute, Remote jog handwheel, Coolant system, External tool storage racks and assorted tooling. For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #79299 Machine Serial Number: 1124936 Cost: £29,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 2024, Bavelloni VE350-8 Straight-Line Vertical Edging Machine. Serial No. 110000297 (2024). Country of Origin: Italy Please Note: Highest bid is subject to vendor approval Bedpfx Aps Afxi As Ioww Location: This lot is located in Burton-on-Trent, UK. A charge of £450 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: used, XYZ 2-OP Compact Vertical machining Centre Year 2017 Pro-Track TMX Control Table Size: 457 x 381 mm X/Y/Z Travels: 355 x 305 x 455 mm Spindle Speeds: 50- 6,000 rpm Spindle BT 30 Spindle 3hp 8 Station Tool Changer Bsdpfx Ajzu Ni Usp Isww Machine Weight: 1,100 kg Footprint: 760 x 1,220 mm

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: w3-1200, CNC Vertical Machining Center VICTOR V-CENTER 85 – 2003 – High Pressure – Chip Conveyor For sale, a CNC vertical machining center, VICTOR V-CENTER 85, manufactured in 2003. A robust and versatile industrial machine designed for milling, drilling, tapping, and precision machining operations. Equipped with a high-pressure coolant pump and a chip conveyor, allowing for better chip removal and efficient cooling during machining. General Specifications Brand: VICTOR Model: V-CENTER 85 Year of Manufacture: 2003 Type: CNC Vertical Machining Center Number of Axes: 3 Axis Travels X-axis Travel: 850 mm Y-axis Travel: 520 mm Z-axis Travel: 560 mm Work Table Table Dimensions: 1,100 × 510 mm Maximum Permissible Load: 750 to 1,000 kg Spindle Spindle Taper: BT40 Maximum Speed: 8,000 rpm Motor Power: 5.5 / 7.5 kW Tool Magazine Capacity: Up to 24 tools Tool Change: Automatic Equipment and Options High-pressure coolant pump Chip conveyor Coolant system for cooling tools and workpieces Automatic tool changer Dimensions and Weight Length: Approximately 2,450 mm Width: Approximately 2,400 mm Height: Approximately 2,640 mm Weight: Approximately 5,950 kg Dimensions and weight are approximate and may vary depending on the version and installed equipment. The footprint of the chip conveyor should be verified separately. Bodpfx Aps Agvwls Ijww Additional Information Machine can be viewed by appointment in Sprimont, Belgium. Price indicated excludes VAT – VAT is recoverable according to applicable conditions. For further information or to arrange a visit:

Condition: like new (used), Year of construction: 2021, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 470 mm, controller manufacturer: Mazatrol, controller model: SmoothX, workpiece height (max.): 320 mm, workpiece diameter (max.): 500 mm, workpiece weight (max.): 200 kg, total height: 2,933 mm, total length: 3,650 mm, total width: 2,984 mm, overall weight: 6,800 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 1,114 h, coolant supply: 70 bar, spindle motor power: 15 W, number of spindles: 1, number of slots in tool magazine: 48, Equipment: chip conveyor, documentation/manual, We are pleased to offer this well-maintained CNC 5-axis vertical machining centre. It is a Mazak CV5-500 from fitted with the Mazatrol Smooth X control system. The machine is in a like new condition with 1114 spindlehours. Technical specifications: Table dimensions: Ø 500 mm Number of pallets: 1 Max. workpiece dimensions: 500 x 320 mm Max. workpiece weight: 200 kg Bwsdpoz Ndxksfx Ap Iew X-axis travel: 730 mm Y-axis travel: 450 mm Z-axis travel: 470 mm C-axis (work table rotation): 360° B-axis travel: ±110 (220) ° Spindle speed: 18,000 rpm Spindle mount: HSK A-63 Spindle motor: 15/11 kW Number of positions in tool magazine: 48 We realise that you may wish to receive further information or view the machine. In that case, please contact us, providing your company details so that we can get in touch with you. About Mamach Machinehandel: With over 40 years’ experience in the CNC machinery sector, we are now one of Europe’s leading suppliers of metalworking machinery. Our success is based on high quality, customer-focused service and a strong international network. Discover our wide range of used CNC lathes and machining centres – we’d be happy to advise you personally!

Condition: good (used), Year of construction: 2011, Haas VF-3YT/50 vertical machining center, manufactured in 2011. Bsdpfx Apj Ahxqyj Ioww

Condition: ready for operation (used), In very good condition. Bwjdpfx Aj Ah Emlsp Ijw

Condition: used, Year of construction: 2013, Doosan DNM650 Vertical Machining Centre (2013), Traverses X Y Z: 1300 x 650 x 510mm, Table 1200 x 540mm, Spindle Speed 12,000rpm, BT40 Spindle Taper, Spindle Motor 17kW, FANUC Oi Control, 30 Station ATC, Low Volt light, Through Spindle Coolant. S/No. MV0011-000877, Machine Weight: 8500kg. Country of Origin: Korea Bwsdpfx Aj Ah E S Hjp Isw Location: This lot is located in Leicester, UK. A charge of £250 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: ready for operation (used), Year of construction: 2002, operating hours: 35,220 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller model: Heidenhain TNC 530i, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 800 mm Travel range, Y-axis: 600 mm Travel range, Z-axis: 500 mm Table dimensions: 1,000 × 560 mm Spindle speed: 8,000 rpm Tool holder: SK 40 MACHINE DETAILS Bwedj Ah H Ipopfx Ap Iow CNC control: Heidenhain TNC 530i Operating hours Spindle hours: 35,220 h Machine operating hours: 141,964 h Control operating hours: 162,422 h EQUIPMENT Chip conveyor

Condition: not inspected (used), Year of construction: 2008, functionality: unexamined, machine/vehicle number: 15405034874, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, nominal power (apparent): 20 kVA, controller manufacturer: HEIDENHAIN, controller model: ITNC 530, total height: 2,400 mm, total length: 2,500 mm, total width: 2,100 mm, table width: 560 mm, table length: 790 mm, table load: 600 kg, overall weight: 7,000 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 11,164 h, number of slots in tool magazine: 20, mount diameter: 40 mm, tool length: 300 mm, tool diameter: 80 mm, input voltage: 400 V, input frequency: 50 Hz, input current: 35 A, feed force X-axis: 5,000 N, feed force Y-axis: 5,000 N, feed force Z-axis: 5,000 N, DECKEL MAHO DMC 635 V CNC Vertical Machining Center - Tool holder: SK 40 - Input resolution X/Y/Z: 0.01 mm - Path measuring system resolution X/Y/Z: 0.001 mm - Positioning tolerance in X/Y/Z with indirect measuring system: 0.020 mm, with direct measuring system: 0.008 mm - Max. tool diameter: 80 mm without free spaces, with free spaces: 130 mm - Max. tool length from spindle nose: 300 mm - Max. tool weight with automatic tool changer: 6 kg - Distance between T-slots: 100 mm Bwedpfx Apj Afulme Ijw - Number of clamping slots: 4 Note: without the machine vices shown in the photos! Includes the SK 40 tool holders located in the tool changer, as well as a 3D measuring probe. Note: Spindle needs to be inspected! FCA D-71679 Asperg - loaded onto a truck.