Used Vertical Gear Hobbing Machine for sale (70,329)

Condition: used, Year of construction: 1985, max. wheel diameter 80 mm gear width 150 mm max. module 2,5 min. module total power requirement 10 kW weight of the machine ca. 2400 kg M I K R O N (Switzerland) Fully Automatic Gear Hobber for Worm Gears Model A 33 / 1 Year 1985 Ser.-No. 14.06/14.07/14.15 _____ Bcsdet Hw D Ropfx Af Eju max. gear- without feed magazine approx. 80 mm max. gear- with feed magazine approx. 50 mm Module max. 2, / 2,5 Axial milling length approx. 150 mm max. workpiece-mounting length approx. 200 mm Milling slide can be swivelled up to 90 degrees Milling cutter - 24 - 50/63 mm Max. radial distance of milling slide 0-14/18 mm Milling cutter adjustment max. 25 mm Milling cutter speed 212 - 2.000 rpm Axial feed range infinitely adjustable 0,05 - 4,0 mm/workpiece rotation radial infinitely adjustable 0,2 - 200 mm/min. Milling spindle drive 3 kW Total electrical load approx. 10 kW - 50 Hz - 380 Volt Weight approx. 2.400 kg Accessories/Special Features: " Fully automatic operation cycle and minimum idle times due to programmable SIEMENS Program Controls S 5 for all machining steps i.e. rapid gear, feed, milling cutter on/off for the loading device, tailstock, possibly shifting, etc. with unit counter, program numbering including 30 different numeric error displays Pneumatic workpiece-loading and unloading facility parallel to work piece axis upright for rod workpieces approx. 140 mm long x 8 mm , including pneumatic double gripper for loading and unloading of work pieces. Raw parts are inserted into change cassettes externally and then placed into the loading device. The double gripper places the parts between workpiece spindle and tailstock, the tailstock spindle sleeve pushes the parts in the main spindle collet and clamps them simultaneously. The finished parts are ejected from the main spindle, then placed back again into the finished parts cassette by the gripper. The whole process is electrically monitored and checked. The complete loading facility is encased by plexiglass. " Hydraulic work piece clamping device including collets and hydraulic ejector " separate cooling system with magnetic separator * separate hydraulic system * various change gears This machine is set up for worm gears/armature shafts that can be used for adjustable car seats, window lifters, etc.

Condition: used, Year of construction: 1992, max. wheel diameter 150 mm gear width 300 mm Bcjdpfjt Hwxbox Af Eou max. module 4,5 min. module total power requirement 20 kW weight of the machine ca. 6 t dimensions of the machine ca. m

Condition: good (used), Liebherr - Lorenz S800 Gear Hobbing Machine -Well-maintained machine with comprehensive accessories -1x pallet of change gears -1x pallet of hobbing cutters -1x pallet of arbors -DOCUMENTATION -Max. workpiece length with counter support: 600 mm -Max. workpiece length with counter support retracted: 800 mm -Max. travel of the milling slide: 360 mm -Largest pitch machinable with largest workpiece: 5 Pi / in standard range: 8 Pi -Spindle taper - milling spindle: MT 5 -Arbors: 22/27/32/40 mm Bcjdpow R Tykjfx Af Eou -Max. cutter diameter: 186 mm -Max. cutter length: 170 mm -Max. cutter shift: 80 mm -Cutter speeds: 40-220 rpm -Feed rates steplessly adjustable / horizontal -Feed rates steplessly adjustable / vertical -Feed rates steplessly adjustable / tangential -Clamping table without coolant rim: 550 mm -Clamping table bore: 100 mm -Clamping arbor taper: MT5 Dimensions: LxWxH 3.6 x 1.8 x 1.9 meters / Weight 5000 kg Subject to errors and input mistakes.

Year of construction: 1984, condition: ready for operation (used), A Pfauter vertical CNC gear hobbing machine is available. Modules min./max.: 1/3, max. workpiece diameter: 150mm, max. tooth width: 150mm, milling head tilt: +/-45°, milling cutter axis-table axis distance: 10mm-160mm, table diameter: 160mm, table bore: 63mm. Tool holder: SK40, max. cutter diameter: 130mm, max. cutter length: 220mm, speed: 600rpm, feed: 1500mm/min, tangential path: 170mm, rapid traverse: 3m/min. Machine dimensions X/Y/Z: approx. 4000mm/3000mm/2500mm, weight: approx. 6500kg. On-site inspection is possible. Bedpfswkih Eox Af Eocu

Condition: refurbished (used), functionality: fully functional, Universal Profile Hobbing and Thread Milling Machine ZFWVG 250x5000 / S7 • Thread milling • Gear hobbing • Longitudinal milling Max. workpiece diameter over saddle: 250 mm Max. workpiece diameter over bed guideway: 500 mm Spindle bore: 102 mm Tailstock quill travel: 100 mm Main motor: 4.0 kW Cross-feed motor (X-axis): 4.3 kW Longitudinal feed motor (Z-axis): 3.8 kW Electrical configuration Operating voltage: 400 V Control voltage: 24 V Frequency: 50 Hz Programmable logic control (PLC) for fixed machine functions Total connected load: 9.5 kW Milling length: 5,000 mm Space requirements: Length: 7,000 mm Width: 2,500 mm Height: 1,600 mm Net weight: 6,700 kg Standard accessories: • Standard thread milling attachment ApG Bsdpow Hquxjfx Af Ejcu • Max. milling diameter: 150 mm • Spindle taper: Morse 3 • Max. module for hobbing: Module 3 • Min./max. number of teeth for hobbing: 4–50 Options: • Hobbing attachment ApFW Hobbing of parallel and helical profiles up to module 7 Max. milling diameter: 150 mm Spindle taper: Morse 4 • Heavy-duty thread milling attachment ApGS Hobbing of parallel and helical profiles up to module 5 Max. milling diameter: 150 mm Spindle taper: Morse 4

Condition: used, Year of construction: 1961, functionality: fully functional, Horizontal Gear Hobbing Machine 5370 The machine is intended for milling slots on shafts, cylindrical spur and bevel gears, chevron wheels, external and internal threads, large-modulus worms, and worm wheels. Technical specifications of the machine: Bcodpfjya U Syox Af Esu Maximum workpiece diameter: 600 mm Maximum hobbable module: 16 Longitudinal caliper travel: 2700 mm Lateral caliper travel: 390 mm Workpiece spindle bore diameter: 200 mm Main electric motor power: 10 kW Machine dimensions: Length: 5960 mm Width: 2260 mm Height: 2400 mm Weight: 23 t

Condition: reconditioned (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 27604, feed length Y-axis: 170 mm, feed length Z-axis: 200 mm, table diameter: 160 mm, spindle speed (max.): 600 rpm, TECHNICAL DETAILS X-axis: 150 mm Y-axis: 170 mm Bcedsv Rdwijpfx Af Eou Z-axis: 200 mm Swivel angle: -150/30° Milling unit Max. hob diameter: 130 mm Max. hob length (shaft mill): 220 mm Max. module: 3 Cutter length: max. 220 mm Cutter speeds: continuously variable up to 600 rpm Milling arbor diameter: 32 mm Table Table diameter: 160 mm Table bore diameter: 63 mm Control & Retrofit Control: SINUMERIK 840 D SIEMENS Retrofit: Sinumerik 840 D / Windows XP Pro in 2010 MACHINE DETAILS Total power requirement: approx. 20 kW Machine weight: approx. 10,500 kg Space required: approx. 6.8 x 3.7 x 2.85 m

Condition: ready for operation (used), Specifications Manufacturer LIEBHERR Model LC 502 CNC Year 1984 Condition Used Serial Number 0501/5 Stock Number DCR1746 Max working diameter 500 mm Max module 10 Table Diameter 400 mm Min number of teeth 8 Hob head inclination angle ±50° Hob speed revolution 480 rpm Bedpfx Asxqmbtof Eocu Description Equipment Retrofitted in 2011 CNC Siemens 840D

Condition: used, functionality: fully functional, table diameter: 430 mm, The price is for both machines – only sold as a set. Make: STAEHELY SH 500 Bjdpjxfub Dofx Af Escu Accessories: change gears, arbors, and one machine with tangential milling head (see photos)!!!!! Table diameter = 430 mm Max. gear diameter = 500 mm Gear width = 240 mm Module = 6

Condition: excellent (used), Specifications Manufacturer LIEBHERR Model LC 282 CNC Condition Used Stock Number Factory Max working diameter 280 mm Module 7 Worktable diameter 250 mm Worktable revolutions 100/200 rpm Min-max distance btw workpiece and hob 30 - 300 mm Hob head inclination angle 45° Bcsdpfxsxgpqcj Af Esu Max hob diameter 160 mm Machine weight 12500 Kg

Condition: ready for operation (used), Year of construction: 1978, operating hours: 4,500 h, functionality: fully functional, workpiece weight (max.): 2,000 kg, wheel width: 600 mm, feed length X-axis: 600 mm, feed length Y-axis: 600 mm, feed length Z-axis: 600 mm, rotary table diameter: 1,020 mm, position of the milling head: +-45 degrees, table diameter: 1,020 mm, feed rate X-axis: 8 m/min, feed rate Y-axis: 4 m/min, feed rate Z-axis: 2 m/min, total length: 4,500 mm, wheel diameter: 1,550 mm, gear diameter: 1,550 mm, total height: 3,300 mm, total width: 2,100 mm, input current: 50 A, input frequency: 50 Hz, workpiece diameter (max.): 1,580 mm, milling spindle length: 380 mm, type of input current: three-phase, milling length: 600 mm, spindle speed (max.): 200 rpm, table bore: 235 mm, spindle speed (min.): 28 rpm, travel distance X-axis: 600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, grinding spindle motor power: 11,000 W, outer diameter: 1,580 mm, overall weight: 16,000 kg, rotational speed (max.): 200 rpm, rotational speed (min.): 28 rpm, table load: 2,000 kg, mount diameter: 235 mm, helix angle: 45 °, tool diameter: 235 mm, Equipment: documentation/manual, rotational speed infinitely variable, Gear Hobbing Machine — WMW MODUL ZFWZ 1250 The MODUL ZFWZ 1250 is a heavy-duty gear hobbing machine designed for accurate machining of large spur and helical gears. Manufactured in 1978 by WMW MODUL (Germany), the machine is known for its robust cast-iron construction, high rigidity, and long-term reliability in demanding industrial environments. The machine is capable of machining gears with a maximum gear diameter of 1,550 mm and a maximum workpiece diameter of 1,580 mm, handling workpieces weighing up to 2,000 kg. It offers a cutting (wheel) width of 600 mm and supports gear hobs with a diameter of up to 235 mm, making it suitable for medium to large gear production. The hobbing spindle features infinitely variable speed control from 28 to 200 rpm, allowing precise adjustment for different materials and cutting conditions. For helical gear machining, the machine is equipped with a tilting milling head (±45°), providing flexibility for various gear geometries. A large rotary table with a diameter of 1,020 mm ensures stable and secure clamping of heavy workpieces. The machine is driven by an inverter-controlled main motor with a power of 11 kW, delivering reliable cutting performance under continuous operation. Power supply is three-phase, 50 Hz. With an overall machine weight of approximately 16,000 kg, the ZFWZ 1250 offers excellent vibration damping and machining stability. The machine is fully functional, ready for operation, and suitable for both production and refurbishment of large industrial gears. Key Features: *Gear hobbing for spur and helical gears *Maximum gear diameter: 1,550 mm *Maximum workpiece weight: 2,000 kg *Cutting width: 600 mm Bodsx I Ntpopfx Af Eecu *Gear hob diameter: 235 mm *Infinitely variable spindle speed: 28–200 rpm *Tilting milling head: ±45° *Heavy-duty industrial cast-iron construction *Inverter-controlled main motor: 11 kW Typical Applications: *Heavy gear manufacturing *Large transmission components *Industrial gear production and refurbishment

Condition: ready for operation (used), Manufacturer LIEBHERR Model L 652 Year 1980 Bcodpfx Aewp Rttjf Eju Condition Used Serial number 0674/5 Max workable diameter 650 mm Max module 10 Hobber shifting 200 mm Hobber diameter 192 mm Hobber length 250 mm Machine weight 11200 Kg Equipment: spare gears instruction manual

Condition: ready for operation (used), Year of construction: 1966, operating hours: 10,000 h, functionality: fully functional, workpiece weight (max.): 3,000 kg, wheel width: 400 mm, feed length X-axis: 483 mm, feed length Y-axis: 381 mm, feed length Z-axis: 521 mm, rotary table diameter: 740 mm, table diameter: 740 mm, total length: 4,500 mm, wheel diameter: 1,000 mm, gear diameter: 1,000 mm, total height: 2,450 mm, total width: 2,450 mm, input frequency: 50 Hz, workpiece diameter (max.): 1,000 mm, type of input current: three-phase, spindle speed (max.): 200 rpm, table bore: 89 mm, spindle speed (min.): 50 rpm, grinding spindle motor power: 7,500 W, overall weight: 8,000 kg, rotational speed (max.): 200 rpm, rotational speed (min.): 50 rpm, table load: 3,000 kg, helix angle: 45 °, Equipment: documentation/manual, rotational speed infinitely variable, Machine Description — Churchill U 3615 Gear Hobbing Machine The Churchill U 3615 is a heavy-duty gear hobbing machine designed for accurate and reliable cutting of spur and helical gears in industrial production environments. Built with a rigid cast-iron structure, the machine ensures excellent stability, low vibration, and consistent machining quality during continuous operation. The machine is capable of cutting gears with a maximum diameter of 1,000 mm without tailstock and 863.6 mm with tailstock, and supports workpieces weighing up to 3,000 kg. A maximum gear face width of 400 mm and a maximum module of 10 allow machining of medium to large-sized gears. The rotary table has a diameter of 740 mm, is equipped with six T-slots, and features a table bore of 89 mm, providing secure and precise workpiece clamping. The machine supports helical gear cutting up to ±45°, expanding its application range. The hobbing spindle accepts tools up to 180 mm in diameter and 240 mm in length. Spindle speed is infinitely variable from 50 to 200 rpm, allowing optimal cutting conditions for different materials and gear geometries. Feed movements are controlled via P.I.V. variable drives, offering smooth and precise adjustment of vertical, horizontal, and tangential feeds, as well as intermittent and continuous hob shifting. The machine is powered by a 7.5 kW main motor and operates on three-phase power at 50 Hz. With overall dimensions of approximately 4,500 × 2,450 × 2,450 mm (L × W × H) and a total weight of around 8,000 kg, the Churchill U 3615 is a solid and dependable solution for heavy-duty gear manufacturing. Bcjdpfox Itfisx Af Eou Manufactured in 1966, this machine is fully functional, ready for operation, and supplied with a full set of change gears, technical passport, and operator’s manual, making it well suited for workshops seeking a proven and durable gear hobbing solution. Overall, the Churchill U/PH 3615 offers: -Heavy-duty, industrial-grade build quality -Large part capacity and flexible travel ranges -Adjustable spindle speeds and feed rates -Reliable operation for continuous gear production

Condition: ready for operation (used), MODUL Germany Gear Hobber ZFWZ 2000/3 Max gear diameter without tailstock: 2100 mm Max gear diameter with tailstock: 1450 mm Max gear face width: 1060 mm Max module with hobbing head: 22 Max/Min centre distance: 1240/150 mm Min number of teeth: 10 Max pressure angle: 45° Table diameter / number of slots: 1800 mm/12 Table bore / length: 600/800 mm Max hob diameter / length: 300/330 mm Max workpiece weight: 15,000 kg Weight approx.: 38 t Bodpfxex Ebwre Af Eocu

Condition: ready for operation (used), Year of construction: 1970, Gear hobber ZFWZ 6300x40 Manufacturer: WMW-MODUL Model: ZFWZ 6300x40/1 Year of manufacture: 1970 Max. workpiece diameter: 7100 mm Gear width: 1500 mm Max. module: 45 Table diameter: 5300 mm Cutter diameter x width: 400x500 mm Bcedoxln Iwepfx Af Eou Max. helical angle: 45 degrees Hob diameter: 500 mm Hob speeds: 9–63 rpm Total power requirement: 47 kW Machine weight: 160 tons Equipped with standard hobbing head, tangential hobbing head, internal milling head, change gears, supports. Video available.

Condition: ready for operation (used), Gear hobbing machine type FD320, FD500 and FD 800 Cugir Maximum module 6 to 10 mm Max. working diameter 320 to 800 mm Bodpfx Afocrd Nmo Ejcu

Condition: new, functionality: fully functional, Year of construction: 2025, The VSI (Vertical Shaft Impactor) sand making machine is a type of crusher designed to accelerate the crushing of aggregate and produce cubical-shaped sand. It is widely used in the field of construction, mining, and other similar industries. Here are key features and information about VSI sand making machines: 1. Working Principle: - The VSI sand making machine operates on the principle of stone impacting stone or stone impacting iron. Material is fed into the center of the rotor, which accelerates to high speed to throw the material outward against a wear-resistant lining. 2. Rotor and Crushing Chamber: - The rotor is a crucial part of the VSI machine and is often designed with multiple pockets to facilitate material throwing and crushing. Bcjdpfjq Nd U Hjx Af Esu - The crushing chamber is lined with wear-resistant materials to endure the impact and abrasion during the crushing process. 3. Feedstock Control: - The feedstock (material to be crushed) can be controlled using a variable speed control system, allowing for adjustments to achieve the desired particle size. 4. Material Types: - VSI machines are suitable for processing various materials, including hard and abrasive materials such as rocks, ores, and minerals. 5. Cubical Shaping: - One of the significant advantages of VSI machines is their ability to produce cubical-shaped end products, which is desirable for high-quality concrete and asphalt production. 6. Adjustable Discharge: - The machine usually has an adjustable discharge opening, allowing for customization of the final product size. 7. Sand Production: - VSI sand making machines are primarily used to produce manufactured sand (M-sand) and crushed sand, which are essential components in the construction industry. 8. Maintenance: - Regular maintenance is required to ensure optimal performance and extend the machine's lifespan. This includes checking wear parts, lubrication, and addressing any issues promptly. 9. Variations: - Different manufacturers may offer variations of VSI machines with unique features or specifications. Common variations include open rotor and closed rotor designs. 10. Environmental Considerations: - VSI sand making machines are generally considered environmentally friendly as they produce less dust and noise compared to traditional crushers. 11. Manufacturers: - Well-known manufacturers produce VSI sand making machines, and it's crucial to choose a reputable supplier with a track record of providing reliable equipment. When considering a VSI sand making machine, factors such as feed size, capacity, and the desired end product specifications should be taken into account. Additionally, check the reputation of the manufacturer, and consider customer reviews and feedback regarding the specific model you are interested in.

Condition: ready for operation (used), Year of construction: 2012, operating hours: 25,243 h, functionality: fully functional, machine/vehicle number: 12030320, travel distance X-axis: 810 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 500 mm, controller model: Heidenhain TNC 620, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel X-axis: 810 mm Travel Y-axis: 400 mm Travel Z-axis: 500 mm Table width: 900 mm Table length: 400 mm Spindle speed (max.): 10,000 rpm Number of spindles: 1 Number of tool magazine positions: 23 Tool holder: BT40 MACHINE DETAILS Control unit: Heidenhain TNC 620 Total weight: 3,500 kg Input voltage: 400 V Controller on-time: 25,243 h EQUIPMENT Documentation/manual Continuously adjustable speed Bcjdpfjyaq Siex Af Eju Chip conveyor Internal coolant supply: 20 bar Disc wiper in coolant tank Air blast cooling through spindle or external External coolant gun Spiral chip conveyor Centralized lubrication

Condition: not inspected (used), Year of construction: 2013, functionality: unexamined, machine/vehicle number: 131057, overall weight: 6,900 kg, number of axes: 3, Equipment: chip conveyor, cooling unit, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Bcedpoyaqliofx Af Esu Number of axes: 3 Tool changer: 30 positions Control: SIEMENS Sinumerik 828D MACHINE DETAILS Machine weight: 6,900 kg EQUIPMENT Chip conveyor Cooling units

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: AB0702, travel distance X-axis: 650 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 530 mm, controller model: FANUC 21 iMB, table load: 500 kg, TECHNICAL DETAILS Travel X-axis: 650 mm Travel Y-axis: 500 mm Travel Z-axis: 530 mm Table clamping surface: 800 x 500 mm Spindle speeds: 60 - 8,000 rpm Spindle taper: SK 40 Spindle taper standard: DIN 69871 A Maximum table load: 500 kg Rapid traverse X/Y/Z-axis: 30 m/min Tool changer: 30 positions Tool diameter with full magazine: 80 mm Tool diameter with 2 free positions: 120 mm Maximum tool length: 250 mm Bcedpfx Aoya E Thjf Eeu Maximum tool weight: 7 kg MACHINE DETAILS Control: FANUC 21 iMB Total power requirement: 30 kVA Dimensions & Weight Machine dimensions (L x W x H): 2.4 x 2.2 x 2.46 m Machine weight: 4.5 t EQUIPMENT NC rotary axis with tailstock, manufacturer MECA-DIVIMEK (Spain), DCH 160 C 2 machine vices Coolant system

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, travel distance X-axis: 1,500 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 650 mm, spindle speed (max.): 6,000 rpm, Equipment: chip conveyor, TECHNICAL DETAILS Travel X-axis: 1,500 mm Travel Y-axis: 650 mm Travel Z-axis: 650 mm Pallet size: 1,740 x 650 mm Spindle taper: SK 50 Spindle speeds: 25 - 6,000 rpm Spindle overhang: 665 mm Distance spindle nose to table: 200 / 850 mm Spindle motor power: 18.5 kW Max. spindle torque: 758 Nm Feed rate - longitudinal/cross/vertical max.: 8 mm/min Rapid traverse longitudinal and cross: 26 m/min Rapid traverse vertical: 20 m/min Drilling capacity (solid): 50 mm Tapping capacity: M 45 Tool changer positions: 60 Tool diameter: 125 mm Tool diameter with 2 empty stations: 260 mm Bsdjya E Ryspfx Af Eocu Max. tool length: 400 mm Max. tool weight: 20 kg EQUIPMENT Chip conveyor Coolant device

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 1,740 mm, travel distance Y-axis: 760 mm, travel distance Z-axis: 660 mm, controller model: Mazatrol 640M, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS X-axis: 1,740 mm Y-axis: 760 mm Z-axis: 660 mm Rapid traverse X-axis: 36 m/min Rapid traverse Y-axis: 36 m/min Rapid traverse Z-axis: 36 m/min Table size: 2,000 x 760 mm Table load capacity: 1,400 kg Distance from table surface to spindle nose: 160 mm - 840 mm Spindle speed: 12,000 rpm Main drive power (5 min): 18.5 kW Main drive power (30 min): 11 kW Tool Changer Number of tool stations: 30 Spindle taper: SK 40 Max. tool diameter: 80 mm Max. tool diameter with free adjacent stations: 110 mm Max. tool length: 350 mm Max. tool weight: 8 kg MACHINE DETAILS Control: Mazatrol 640M Interfaces: RS232, LAN, Floppy drive Dimensions & Weight Dimensions (L x W x H): 4,435 x 3,300 x 3,442 mm Machine weight: 11,500 kg Operating Hours as of 23.05.2025 Operating hours: 6,585 h Cutting hours: 8,300 h Auto cutting hours: 8,374 h EQUIPMENT Bcodpsya Dh Rofx Af Eou Documentation/manual Chip conveyor Relocation detector Automatic tool length measurement system Preparation for partition wall for pendulum machining 4th axis Electronic handwheel EIA / ISO programming Synchronous tapping Through-spindle coolant, 5 bar

Condition: defective spare-parts repository (used), Year of construction: 1991, functionality: not functional, travel distance X-axis: 700 mm, travel distance Y-axis: 350 mm, table width: 380 mm, table length: 925 mm, spindle speed (max.): 6,000 rpm, TECHNICAL DETAILS Travel X-axis: 700 mm Travel Y-axis: 350 mm Table size: 925 mm x 380 mm Spindle taper: SK 40 Spindle speed: up to 6,000 rpm Drive power: 11 kW Tool changer capacity: 20 MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,600 x 2,100 x 3,000 mm Machine weight: approx. 3,600 kg Note: The machine no longer starts. It is being sold for spare parts. Bcjdpfxoyf Ac De Af Eeu

Condition: ready for operation (used), Year of construction: 2016, operating hours: 400 h, functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, controller model: Siemens 828D, spindle speed (max.): 12,000 rpm, The machine spindle was replaced in 2022! TECHNICAL DETAILS Travel X-axis: 1,050 mm Travel Y-axis: 550 mm Travel Z-axis: 500 mm Milling spindle (BT40): 12,000 rpm MACHINE DETAILS Control unit: Siemens 828D Operating hours: Power-on hours: 26,247 h Spindle hours: approx. 400 h (total 4,727 h) EQUIPMENT - Active electrical cabinet air/air cooler - Network connection - USB interface - Spindle chiller - Side windows left and right for large components - Safety cabin with armoured glass - Coolant pump at spindle - Pump for chip flush device - Air at the spindle via M-code function - Operating status light - Oil separator Bcsdpoyf E Szjfx Af Eou - Electronic handwheel - ICS system (internal coolant supply) - Pump for ICS - 24-position tool changer - Hinge-type chip conveyor, rear discharge - Glass scales including purge air by Siemens - Wireless workpiece measuring system Renishaw OMP60 - Tool measuring system Renishaw NC4 - Automatic machine door Note: The Halter automation system as well as vices including zero-point clamping system are not included in the scope of delivery.

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, grinding wheel diameter: 200 mm, workpiece length (max.): 200 mm, TECHNICAL DETAILS Grinding wheel diameter: 100–200 mm Maximum workpiece length: 200 mm MACHINE DETAILS Control: Siemens 840D or equivalent CNC axes: 3–5 axes Drive power: 5–10 kW Coolant tank: 100–200 litres EQUIPMENT Coolant filtration system Universal applicability for different tool types and geometries High flexibility through CNC programming and adaptable clamping devices Process reliability thanks to integrated cooling and filtration system Bcedpeya Dy Hofx Af Esu Easy maintenance due to modular design and central supply units