Used Vertical Banding for sale (10,967)

Condition: new, Year of construction: 2024, New Grundfos Pump - Vertical, multistage centrifugal pump with integrated frequency converter. inlet and outlet ports on same the level (inline). The pump head and base are in cast iron – all other wetted parts are in stainless steel. A cartridge shaft seal ensures high reliability, safe handling, and easy access and service. Power transmission is via a rigid split coupling. Pipe connection is via DIN flanges. The pump is fitted with a 3-phase, fan-cooled asynchronous motor. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The operating panel has indicator lights for "Operation" and "Fault". Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box holds terminals for these connections: • pump start/stop input (potential-free contact) • remote setpoint setting via analog signal, 0-10 V, 0(4)-20 mA • 10 V voltage supply for setpoint potentiometer, Imax = 5 mA • three analog sensor inputs, 0-10 V, 0(4)-20 mA • 24 V voltage supply for sensor, Imax = 40 mA • one analog output Bedpeyug R Rofx Afmslp • three digital inputs • two Pt100 inputs • two potential-free fault signal relays with changeover contact, reporting "Fault", "Operation" or "Ready" • RS-485 GENIbus connection • interface for Grundfos CIM fieldbus module

Condition: new, Year of construction: 2027, Machine in LIKE-NEW condition! Geometry inspection according to DIN 8609 12-month warranty for all damages Control system: conventional / Siemens PLC with rotary table control 4-axis digital display from Fagor / ACU-RITE or Heidenhain Complete electrical equipment 230/400 V, 50 Hz, German manufacturer, CE standard Technical data: Max. workpiece dimensions: - Diameter mm 3200 - Height mm 1600 (up to 2600 possible*) Max. workpiece weight kg 16000 Rotary table diameter mm 2800 Blsdpfxjcht Tns Afmop Max. travel length - horizontal mm 1720 - vertical mm 1200 Number of steps for rotary table indexing 18 Rotary table speeds Siemens PLC or stepless (2 steps) Lenze control rpm 1.6-63 / 0-80 Support working feed: number of steps 18 Speed of cross slide adjustment mm/min 360 Max. support rapid traverse speed mm/min 2000 Max. rotary table torque kN/m 67 Power of main drive kW 55/75 Dimensions (L x W x H) mm 5490 x 7075 x 5100 Weight kg 43,000

Condition: new, Year of construction: 2027, NEW MACHINE TECHNICAL DATA: Working diameter 2500mm Max. workpiece height 1600mm Max. workpiece weight 16000kg Face plate diameter 2240mm Face plate rotation speed 0-100U/min Max. torque on face plate 50000Nm Performance of main drive 75kW SETTINGS: -1/2 supports -Capto quick change system / 3-ffold steelholder -Telescopic cover Bledpfxscxlyle Afmjp -Zentral lubrication SKF/VOGEL -12 month warranty -complete electrical installation 230/400V,50Hz, Made-in-Germany, CE-Norm OPTIONS: -machine housing -chip conveyor -cooling water preparation -Turret -driven tools -... CONTROL: FAGOR/SIEMENS OTHER: Geometrie-Abnahme nach DIN8609

Condition: new, Year of construction: 2026, Hebrock F 4 For the complete processing of your panels Bledpfshqadcex Afmjp For those who don’t want to compromise. With the F 4, we offer you a model that allows you to produce completely finished edges on a machine length of only 4 meters. The F 4 is not only space-saving but also extremely attractive in terms of price-performance ratio. Max. edge thickness: 3 mm Min/Max. workpiece thickness: 8 – 50 mm Min. workpiece length: approx. 160 mm Feed speed: approx. 7 m/min Ready for operation: approx. 3.5 min Max. power consumption: approx. 7.4 kW Electrical connection: 400 V – 3 phases – 50 Hz Work table height: approx. 900 mm Machine dimensions: approx. 4050 x 1300 x 1400 mm (L x W x H) Weight: approx. 820 kg Extraction nozzle: Ø 1 x 140 mm PLC control with 10″ touchscreen Top-mounted rapid heating glue tank (maintenance-free) Support plate for edge material Automatic central lubrication (miter saw, corner router) Optical display for workpiece sequence Outrigger (extendable to the front) Quick-change unit preparation, including glue change device for PUR processing Surface scraping blade with dual contact Pneumatic roller capping (scissors-type design, Hebrock system) Double roller pressure (ball-bearing mounted) Transport chain with permanently screwed-on special chain plates Edge router Routing unit Miter saw Corner router Accessories: F4/09 Radius scraping blade (incl. pneumatic lift) F4/09/4 Multi radius scraping blade (R1/R2) F4/30 Pneumatic 3-point adjustment Location: In stock, 54634 Bitburg - available on short notice -

Condition: new, Year of construction: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only affordable and space-saving, but it also boasts the features you need to process edges perfectly from the start: diamond-tipped joiner cutters guarantee excellently prepared workpieces for edgebanding. The equipment includes a joiner unit (up to 2 mm cutting depth), the top-mounted quick-heating glue container, a miter saw, and a combination router. Optionally, the F 2 can also be equipped with a surface scraping blade. Maximum edge thickness: 3 mm Bjdpfx Afei Am U Domelp Maximum workpiece thickness: 50 mm Ready for operation in 3.5 minutes Equipment: F2 - 10 m/min Edgebanding machine F2 next With PLC control (including touchscreen) and hot-melt glue application to the workpiece for edge material up to 3 mm; joiner cutter (including diamond tool) up to 2 mm cutting depth, maintenance-free glue tank with replaceable tank preparation including glue dispensing device, high-frequency miter saw station (approx. 12,000 rpm), high-frequency router station (approx. 12,000 rpm) with separate pneumatic router adjustment and interchangeable blade router (combination design), robust chain drive, ball-bearing double roller pressure, viewing window from the back of the machine, pull-out workpiece support, feed rate approx. 10 m/min. F2/10 chassis F2/30 pneumatic 3-point adjustment (radius, chamfer, flush trimming)

Condition: new, Year of construction: 2026, For sawing, e.g., stainless steel, tool steel, hollow profiles, and solid materials. Two-pole drive motor enables saw blade speeds of 30 and 65 m/min. Monitoring of the saw blade tension electromechanically via microswitches. When the saw arm is raised, the lowering cylinder locks in the upper position via the solenoid valve – additional locking on the cylinder is therefore not required. Saw arm inclined by 25°, resulting in a longer service life of the saw blade. Precise and robust blade guides with adjustable carbide plates. After the cutting process is completed, the saw blade stops automatically in the lower end position. Lowering of the saw arm by gravity or manually. With continuously adjustable, constant saw arm lowering speed via hydraulic cylinder. Dimensions and weights Length approx. 1200 mm Width/Depth approx. 650 mm Height approx. 1800 mm Weight approx. 270 kg Electrical data Connection voltage 400 V Mains frequency 50 Hz Machine data Saw blade speed(s) 30 / 65 m/min Speed stages 2 Saw blade length 2450 mm Saw blade width 27 mm Saw blade thickness 0.9 mm Material feed Table height, material feed 925 mm Cutting ranges 0° round (tube) 220 mm 0° round (solid material) 120 mm 0° rectangular (lying, hollow profile) 230 x 150 mm 0° bundle (tube) 230 x 120 mm -45° round (tube) 160 mm -45° round (solid material) 85 mm Bledpfsg U Uv Rex Afmop -45° rectangular (lying, hollow profile) 160 x 90 mm -60° round (tube) 90 mm -60° round (solid material) 55 mm -60° rectangular (lying, hollow profile) 90 x 90 mm Art. No.: 3680001 Location: In stock, 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, Holzkraft HBS precision wood band saws for the craftsman Top quality, workmanship and price-performance ratio Particularly quiet and precise running thanks to a torsion-free machine housing Large-dimensioned gray cast iron saw table made from one piece, with a precisely ground and polished surface. Quick saw band tensioning via eccentric lever on the back of the machine Standard with two speeds Precise 3 roller saw band guides, standard at the top and bottom from HBS 351 Quick cutting height adjustment via rotary knob and rack with millimeter scale Smooth-running aluminum parallel stop with eccentric quick clamp and magnifying glass Standard miter angle stop, adjustable by 60 degrees on both sides Aluminum parallel stop with eccentric quick clamp Technical data: Work table dimensions: 495*356 mm Cutting speed: 650/400 m/min Flywheel diameter: 356 mm Max. cutting height: 200 mm Max. cutting width with stop: 321 mm Saw band length: 2562 mm Precision guide 3 rollers: top/bottom Saw table inclination: -10 degrees, + 45 degrees Motor power: 550 watts/230 volts Weight: 80 kg Dimensions in mm: 610*445*1753 Extraction nozzle diameter: 100 mm Location: from stock 54634 Bitburg Blsdpfjvk Sdksx Afmep - immediately available -

Condition: used, Year of construction: 2008, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 300 mm, table width: 550 mm, table length: 700 mm, spindle speed (max.): 42,000 rpm, spindle nose: HSK 40, number of slots in tool magazine: 20, Vertical Machining Center Manufacturer: RÖDERS Model: RFM 600 DS Year of manufacture: 2008 Control system: Röders RFM 600 DS Technical data: - X-travel: 600 mm - Y-travel: 450 mm - Z-travel: 300 mm Bedpfjx Iwg Dox Afmjlp - Spindle speed: 42,000 rpm - Table size: 700 x 550 mm - Tool holder: HSK 40 - Number of tool positions: 20 Equipment: - Extraction system (Keller) - Pallet system (Röders RC 2) Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale.

Condition: excellent (used), The fully hydraulic production rapid bow saw is equipped with a universal hydraulic system allowing for exclusive or alternating cutting of thin- and thick-walled profiles as well as solid material, without the need to change the saw blade, utilizing a uniform tooth pitch of 3 or 4 teeth per inch. Features include preloaded bow guide, enclosed oil hydraulics, triple pivot bearing, separate coolant system, steplessly adjustable hydraulic cutting pressure, lift motion and accelerated return stroke, and is factory-equipped with an infinitely variable miter facility. The saw bow can be lifted in rapid traverse mode. The pendulum vise ensures optimum saw blade utilization. The longitudinal guide features ground and hardened guide rails for transmitting cutting forces to the saw bow. Automatic end-of-cut shut-off. Push-button controls for ON, OFF, and rapid traverse of the saw bow. Manufacturer: KASTO Machine type: Metal bow saw Model: PSB 253 U Drive power: 1.6 kW Stroke rates: 50 / 100 / 164 per min Cutting speed: 11 / 22 / 36 m/min Universal hydraulics: standard Saw feed: Hydraulic Bsdpsxiv Sfofx Afmolp Round cutting capacity: 255 mm Flat cutting capacity: 255 x 160 mm Miter range: 0-45° Workpiece support height: 500 mm Weight: 490 kg Length/width: 1200 x 750 mm Height: 850 mm Saw blade dimensions: 400 x 36 x 2.0 mm Year of manufacture: 1990 Accessories: Coolant device

Condition: reconditioned (used), Year of construction: 1978, turning diameter: 1,300 mm, rotary table diameter: 1,000 mm, spindle speed (max.): 250 rpm, Single-Column Vertical Turning Lathe Manufacturer: DOERRIES Type: CTE 100 Year of manufacture: 1978 / Retrofit 2013 Technical data: Blsdpfoxmk E Ujx Afmep - Max. turning diameter: 1,300 mm - Table diameter: 1,000 mm - Max. workpiece height: 1,500 mm - Machining length: 1,050 mm - Max. table speed: 280 rpm - T-slots: 48 x 28 - Speed range: 4.75 – 250 rpm - Rapid traverse: 6,000 mm/min Equipment & accessories: - Precision class: IT7 - 4-position swiveling head In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are included in the scope of delivery only if noted in the additional information. Subject to technical changes, errors, and prior sale.

Condition: used, Year of construction: 1998, x-travel 0500 mm y-travel 400 mm Bljdpfx Ajzhxi Djfmjp z-travel 400 mm table surface area 700 x 500 mm tool taper 40 SK/ISO spindle turning speed range 20- 4500 U/min feeds 5000 mm/min spindle motor 12 kW total power requirement 13 kW weight of the machine ca. 2,8 t dimensions of the machine ca. 3 x 2 x 2 m Table could be rotated and swiveled manually with digital readout in C- and B- axe over control panel. Control: Heidenhain TNC 124.

Condition: ready for operation (used), Year of construction: 2008, operating hours: 411 h, functionality: fully functional, chuck outer diameter: 1,200 mm, spindle speed (max.): 300 rpm, spindle speed (min.): 2 rpm, turning diameter: 1,600 mm, Massa Heavy Duty Precision CNC Vertical Borer Model: VL-1200 ATC + C Control: Fanuc 18i TB Year: 2008 Max Swing Dia:1600mm Max Turning Dia: 1350mm Max Turning Height: 1250mm 4 Jaw Scroll Chuck Dia: 1200mm Table Speeds: 2-300 RPM 16 Station Tool Changer ‘C’ Axis 360 Degrees ‘C’ Axis Milling Spindle BT 50 Bodpfezv T A Ijx Afmolp Dimensions: 6300 x 4500 x 5800mm Weight: 33,000 KGS

Condition: like new (used), Year of construction: 2019, operating hours: 2,557 h, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, feed rate X-axis: 25 m/min, feed rate Y-axis: 25 m/min, feed rate Z-axis: 25 m/min, controller manufacturer: HAAS, controller model: CNC Control, total height: 3,096 mm, total length: 3,832 mm, total width: 3,402 mm, table width: 473 mm, table length: 1,321 mm, table load: 1,500 kg, overall weight: 6,500 kg, spindle speed (max.): 8,000 rpm, operating hours of spindle: 2,557 h, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 20, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, The machine is in excellent condition and has only 2557 spindle hours, and it is very well-equipped! This HAAS VF-4 is equipped with: - Chip conveyor - Renishaw OTS tool probe - Renishaw (HAAS 40-2) 3D probe - Programmable coolant nozzle - Mechanical preparation for a 4th axis - Approx. 25 tool holders incl. tools - Machine vise - Coolant gun Bodpoz Nfirsfx Afmelp - 3 Renishaw probe styli - Coolant tank - Original documentation.

Condition: ready for operation (used), Year of construction: 2015, operating hours: 8,950 h, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, feed rate X-axis: 36 m/min, feed rate Y-axis: 36 m/min, feed rate Z-axis: 36 m/min, controller manufacturer: HAAS, controller model: CNC Control, workpiece weight (max.): 680 kg, total height: 2,570 mm, total length: 2,570 mm, total width: 2,510 mm, table width: 356 mm, table length: 914 mm, table load: 680 kg, overall weight: 3,600 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 8,950 h, spindle nose: CAT 40 / BT40, number of spindles: 1, number of slots in tool magazine: 24, Equipment: chip conveyor, documentation/manual, The Haas VF-2SS is a compact, high-speed 3-axis vertical CNC machining center. The “SS” stands for Super-Speed. This machine is installed and operational at our location and can be inspected while running! This HAAS VF-2 SS is equipped with: - SS (Super Speed) version. - 24-tool magazine. - Internal cooling (IKZ). - Chip conveyor. - Renishaw OTS tool probe. - Renishaw OMP40-2 3D probe. - Programmable coolant nozzle. - Air blow gun. - Coolant tank. - Original documentation. Bedoz Nhphspfx Afmolp

Condition: used, Year of construction: 2008, Edge banding machine Manufacturer: IMA Type: Advantage 60 Year of manufacture: 2008 Technical data - Feed speed: 16 m/min - Workpiece thickness: 8 - 60 mm - Workpiece length: min. 150 mm - Workpiece width: min. 65 mm - Edge thickness: 0.3 - 8 mm - Edge height: 12 - 65 mm - Edge length: 160 - 350 mm - Joint milling unit - Air blow nozzle for removing loose particles - Workpiece preheating - Glue application unit - Cross-cutting saw unit - Multi-function milling unit for milling and rounding corners - Profiling blades Bodpsz Tf E Ujfx Afmelp - Cleaning agent spray system (Riepe) - Surface finishing blades - Brush unit - Groove milling unit Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is non-binding.

Condition: good (used), Year of construction: 2001, functionality: fully functional, Technical data will follow... Blsdpfx Afez Rka Semjp

Condition: excellent (used), Year of construction: 2003, operating hours: 23,273 h, travel distance X-axis: 1,200 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 500 mm, workpiece length (max.): 1,400 mm, workpiece width (max.): 900 mm, workpiece height (max.): 240 mm, total length: 4,000 mm, total width: 3,000 mm, overall weight: 13,200 kg, spindle motor power: 32 W, CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 1.200 Y-axis travel mm: 900 Z-axis travel mm: 500 Rapid traverse m/min: 30 Worktable Table dimensions mm: 1.400 × 900 Max. workpiece weight kg: 1.800 Maximum workpiece size (W x L x H ) mm: 1.400 × 900 x 240 Spindle Spindle speed rpm: 10.000 - 16.000 - 24.000 Spindle drive power kW: 32 Spindle torque Nm: 200 Tool system Tool holder: HSK-A63 Tool magazine slots: 30 Max. Tool Diameter: 125 Max. Tool Length mm: 300 Max tool weight kg: 4 Chip-to-chip time s: 6,5 Equipment Electronic Handwheel Chip conveyor Workarea light Cooling Tank capacity: 300 L Bsdpfx Asz S Uddsfmolp Machine running times Under power: 103.179 Rated power kVA: 31 Operating Time: 23.273 Basic machine dimensions / weight Length mm: 4.000 Width mm: 3.000 Height mm: 2.800 Weight kg: 13.200

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 Equipment and technical data: · Wheel diameter: 600 mm · Belt speed: 1550 m/min · Cutting height: 400 mm · Cutting width: 580 mm · Maximum blade length: 4735 mm · Minimum/maximum saw blade width: 15 mm / 30 mm · Optional, with special coating: minimum/maximum saw blade width: 8 mm / 25 mm · Table size: 810 x 590 mm · Table height: 920 mm · Dust extraction port: 2 x Ø 100 mm · Motor power: 2.2 kW / 3 HP · Voltage: 400 V / 50 Hz · Color: RAL 7035 light gray and RAL 5000 violet blue · Net weight: approx. 275 kg TECHNICAL DESCRIPTION · Solid German engineering · Machine stand in aesthetically pleasing, modern, torsion-resistant double-chamber steel welded construction · Upper and lower doors secured via limit switches · Upper and lower precision band saw blade guide APA 2, size 2 · Finely planed gray cast iron table · Table top can be swiveled up to 45° · Dynamically balanced band saw wheels with vulcanized rubber tires · Fence rail on the left side of the saw blade can be used; fence profile can be folded down · Blade tension indicator · 1 saw blade 4735 x 25 x 0.6 mm, tooth spacing 9 mm, No. 3780.250D · Mechanical height adjustment of the saw blade guard via handwheel with locking ratchet · From 2.2 kW - rotary cam switch with direct start and emergency stop button · From 3.0 kW - rotary cam switch with star-delta start and emergency stop button · Mechanical motor brake with main switch and motor protection relay · CE compliant including transport pallet including preliminary freight to 65239 Hochheim Bledpfx As Aa Ea Defmsp Availability: short-term Location: Flörsheim

Condition: used, Year of construction: 2009, overall weight: 7,500 kg, spindle speed (max.): 8,000 rpm, number of slots in tool magazine: 24, Fanuc Travel: 1200 x 600 x 600 mm Bsdpfx Afo Aa N Tnjmelp Table: 1300 x 600 mm BT 40, 8000 rpm 24-tool changer Weight: 7500 kg

Condition: defective spare-parts repository (used), Year of construction: 2001, travel distance X-axis: 390 mm, travel distance Z-axis: 435 mm, spindle speed (max.): 4,500 rpm, turning diameter: 220 mm, Vertical Turning Machine - Parts Donor Manufacturer: EMAG Model: VL5 Year of manufacture: 2001 Control system: Fanuc 18i The machine has not been tested and is being sold as a source of spare parts. Technical data: - Turning diameter: 220 mm - X-axis travel: 390 mm - Z-axis travel: 435 mm - Tool holder: VDI 40 - Number of tool stations: 12 positions Bjdpfxjzz S R Ie Afmelp - Spindle speed: 4,500 rpm Accessories, tools, and workholding devices shown in the images are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale.

Condition: used, Year of construction: 2015, operating hours: 56,000 h, travel distance X-axis: 1,250 mm, travel distance Y-axis: 840 mm, travel distance Z-axis: 550 mm, torque: 140 Nm, controller manufacturer: Siemens, controller model: 840D, overall weight: 9,700 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 17,500 h, spindle motor power: 22,500 W, spindle nose: HSK 63, number of slots in tool magazine: 24, tool length: 320 mm, Equipment: chip conveyor, Vertical Machining Center Manufacturer: CHIRON Model: MILL 1250 Year of manufacture: 2015 Control system: Siemens 840D Technical specifications: - X-axis: 1250 mm - Y-axis: 840 mm - Z-axis: 550 mm - Speed range - main spindle: 12,000 rpm - Drive power - main spindle: 22.5 kW - Max. torque: 140 Nm - Number of tools: 24 - Max. tool length: 320 mm - Spindle taper: HSK 63 - Operating hours: 56,000 h - Spindle hours: 17,500 h - Machine weight (approx.): 9.7 t Equipment & Accessories: - Internal Coolant Supply (ICS) - Chip conveyor Bljdpfx Ajy Tbtlofmop - Glass scales on all axes - Automatic door - Swivel axis with counter-bearing (Fibro) 4 identical machines are available. The machines were used for light countersinking and drilling operations. In our assessment, the machine is in very good used condition and can be inspected under power by appointment. Subject to technical changes, errors, and prior sale.

Condition: reconditioned (used), Year of construction: 2013, Used machine Year of manufacture: 2013 Equipment and technical data: - machine has been completely overhauled: - new Glue Jet 301 glue system (top part 1 mm) - all units inspected - all cutters sharpened - all knives replaced - feed speed: 10 - 18 m/min - workpiece length: min. 160 mm - workpiece width: min. 60 mm - workpiece thickness: 8 - 60 mm - edge thickness: 0.4 - 8 mm - electrics for infinitely variable feed: 400 V / 50 Hz, 2.2 kW - motorised pressure beam adjustment - automatic chain lubrication - PPC 315 control with 15" touchscreen - ECO MODE energy-saving mode - infeed fence 1350 mm, motor-adjustable - jointing/trimming unit 1802: Bodpfjzlbpzsx Afmolp - 2 x 2.0 kW, 200 Hz, 12000 rpm with 2 milling units for jointing the panel edge - cutter, diamond Ø 70 x 64 x 30 mm, Z2, counter-clockwise for jointing unit - cutter, diamond Ø 70 x 64 x 30 mm, Z2, clockwise for jointing unit - edge feed 1901 fully automatic - adhesive application station Glu Jet GJ301 automatic: - 2.3 kW; 50 Hz - storage hopper for granulate - pressure unit 1913 MOT - end-trimming unit 1918 (60 mm) pneumatic - multifunction milling unit 1826 MOT4 (2 x 0.65 kW): - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm counter-clockwise - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm clockwise - profile milling unit 1833 MOT4: - cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 radius R = 2.5 mm, counter-clockwise with CM technology - cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 radius R = 2.5 mm, clockwise with CM technology - scraper unit 1929 MOT2: - carbide indexable inserts for scraper holder R = 2.5 mm (2 pcs. required) - flat scraper 1964 - buffing unit 1940 (2 x 0.12 kW, 50 Hz, 1400 rpm) Availability: at short notice Location: 63934 Röllbach

Condition: not inspected (used), Year of construction: 1994, travel distance X-axis: 630 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 426 mm, overall weight: 6,500 kg, number of slots in tool magazine: 20, FZ18W magnum rotary indexing table, Fanuc OM control BT40 spindle, maximum spindle speed 8,000 RPM 20-tool changer 2 tables Bsdszbal Iopfx Afmelp Nikken dividing head

Condition: used, Year of construction: 2004, overall weight: 1,700 kg, Automatic Band Saw - Horizontal Manufacturer: KASTO Model: KASTOtwin A2 Bledpozczhtofx Afmjp Year of manufacture: 2004 Technical data: - Cutting range: 260 x 260 mm - Cutting speed: 20 - 110 m/min - Weight: approx. 1,700 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale.

Condition: not inspected (used), Year of construction: 1999, cutting width (max.): 360 mm, overall weight: 2,500 kg, cutting capacity, maximum diameter 360 mm Bledpfx Afszbrnbjmsp roller tables chip conveyor weight 2500 kg