Used Vertical Banding for sale (10,944)

Condition: used, Vertical Bandsaw WESPA Type AS 4 Serial No. 61520 Year of manufacture: approx. 1975 Wheel diameter: 400 mm Throat depth: 380 mm Table size: 610 x 610 mm Maximum cutting height: 245 mm Saw blade length: min. 2800 - max. 3000 mm Blade speed: 25-550 m/min, stepless Power supply: 400 Volt, 50 Hz - Infinitely variable blade speed via 2 gearbox stages and stepless belt drive Bodjydqfkjpfx Afmoww - Saw table with longitudinal adjustment via handwheel and leadscrew - Saw table tiltable - Adjustable fence for the saw table - IDEAL BS 0-16 blade butt welding machine - Blade shear - Grinding stone for grinding the weld seam - Air compressor with blow nozzle - Machine lamp Required space (L x W x H): 1100 x 800 x 1810 mm Weight: 530 kg Good condition

Condition: used, Year of construction: 2017, Behringer LPS 60-T – Vertical metal band saw - Servo feed with cutting pressure control - Robust cast iron band guide - Fast band change - Operating hours of the saw drive: 32441 h - Year of manufacture: 2017 Technical data - Working area L x W x H: 1260 x 720 x 600 mm - Minimum material height: 10 mm - Minimum section width: 5 mm - Inner table support area: approx. 1260 x 680 mm - Inner table max. load: 3000 kg - Outer table support area: approx. 1260 x 680 mm - Outer table max. load: 3000 kg - Material support height approx.: 1050 mm (incl. base pan) - Cutting speed: 10 - 110 m/min - Saw band dimensions: 5400 x 54 x 1.6 mm - System/band tension pressure: 85 bar - Coolant quantity: approx. 100 l - Motor power – Saw drive: 5.5 kW Bodpfoz H Ac Ajx Afmjww - Motor power – Hydraulic pump: 2.2 kW - Motor power – Coolant pump: 0.15 kW - Motor power – Chip conveyor: approx. 0.26 kW - Connection value: approx. 10.5 kW - Voltage: 400 V, 50 Hz - Control voltage / hydraulic valve voltage: 24 V = (DC) - Current consumption: approx. 31 A - Fuse rating: 35 A - Conductor cross-section: min. 10 mm2 - Machine dimensions W x H x D: 3150 x 2970 x 2500 mm - Weight (net): approx. 3200 kg

Condition: used, Vertical bandsaw MÖSSNER REKORD, type SM 420 Machine no. 17010, year of manufacture 1968 Roll diameter 420 mm Overhang in width 415 mm Overhang in height 265 mm Table size 605 x 600 mm Band speed 18 - 562 m/min, 8 steps Saw band length min/max 3150 / 3260 mm Drive power 1.1 / 1.7 kW Mains connection 380 V 50 Hz - Saw band speed adjustable via 4 gear stages and 2 motor speeds Bwodpodzqc Rsfx Afmjw - Butt-welding machine for saw blades IDEAL BS 0-16 with scissors and grinding wheel - Swiveling work table in 2 axes Space requirement L x W x H 950 x 750 x 1900 mm Weight 570 kg Good condition

Condition: used, Year of construction: 1975, roll diameter 440 mm throat 420 mm workpiece height 200 mm cutting speed 20 - 1550 m/min table surface area 560 x 560 mm band length 3250 mm total power requirement 1,5 kW weight of the machine ca. 0,8 t dimensions of the machine ca. 1,2 x 0,8 x 2,1 m Bandsaw with - Saw blade welding unit - Grinding stone - Saw bands Bwodpfsvu Hb Esx Afmsw - documentation

Condition: ready for operation (used), Year of construction: 1961, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS GENERAL DATA Manufacturer: PEHAKA Type: USF 4R Year of manufacture: 1961 Machine type: Metal band saw SAWING DATA Roller diameter: 380 mm Overhang: 380 mm Workpiece height: 260 mm Table dimensions: 600 × 600 mm Cutting speed: 0–2,000 mm/min MACHINE DETAILS ELECTRICAL DATA Total power consumption: 1.5 kW DIMENSIONS AND WEIGHT Length: 1,200 mm Bwedpfxs Ad Iwyj Afmew Width: 1,000 mm Height: 1,900 mm Weight: 1,300 kg

Condition: used, Year of construction: 1972, table-size 670 x 670 mm throat 1030 mm workpiece height max. 300 mm Bodpfxotqqrkj Afmjww saw band length min. 4700 mm saw band length max. 4800 mm sawing motor 2,2 kW total power requirement 3,2 kW weight of the machine ca. 1,0 t dimensions of machine L x W x H 2,31 x 1,05 x 2,03 m Accessories: saw band welding and grinding attachment - table swivelling left / right - hydr. feed in table

Condition: used, Year of construction: 1976, Description to follow! Bodpfjwqrw Aex Afmeww

Condition: good (used), Year of construction: 1983, dimensions of the machine ca. 1210 x 1000 x 2070 mmxmmxmm weight - pallet system 1000 kg table-size 800 x 820 mm MÖSSNER SSF/501 Vertical Band Saw Table size: 800 × 820 mm Table travel: approx. 350 mm Cutting height under guide: approx. 400 mm Bwjdpfoyxhg Ajx Afmew Cutting width / reach: approx. 500 mm

Condition: used, Year of construction: 1983, Technical details: throat: 315 mm throat in width: 310 mm throat in - height: 230 mm saw band length: 2530 - 2650 mm saw band width: 13 mm band speed: 12 - 750 m/min Table dimensions: 500 x 500 mm table height over floor: 950 mm total power requirement: 1,3 kW machine weight approx.: 450 kg dimension machine xH: 0,8 x 0,7 x 1,65 m Bsdpova E E Tsfx Afmsww Steel and metal band saw Filing band length 2550 mm Additional equipment: Saw band processing Ideal -> saw band cutting device-saw band welding device-saw band grinding device Cooling via spray feeder Foot control Accessories -div. saw bands -1x running wheel Ø 320 mm -Saw band by the meter RRR Roentgen *

Condition: used, Technical details: dimensions of saw-band: 3400 mm saw band length: min. 3200 mm saw band width: 20 mm band speed: 6 / 12 / 25 / 75 / 150 m/min cutting speed: 15 - 1500 / steples m/min Table dimensions: 665 x 665 mm table height over floor: 1050 mm table swivelling to both sides: 15° / 30° Grad table feed: Länge: 250 mm total power requirement: 4,0 kW dimension machine xH: 1,2 x 0,9 x 2,2 m Bwsdpjv T Th Nsfx Afmsw Steel and metal band saw with saw band cutting, welding and grinding device Saw band speed 2 steps, infinitely variable Infinitely variable table feed Tiltable table Machine lighting Stop bar *

Condition: excellent (used), Catalog number: 8105 Bedpfxezzxpqs Afmsww TECHNICAL DATA - Min. length of cut elements: 500mm - Max. length of cut elements: 5860mm - Min. diameter of processed raw material: 60mm - Max. diameter of processed raw material: 380mm - Min. width of cut log: 50mm - Max. width of cut log: 250mm - Power of head motors: 2 x 5.5kW - Feed motors: 2 x 0.75kW - Feeder feed – smoothly controlled by a frequency converter - Bandsaw: - Saw blade length: 4004mm - Saw blade width: up to 42mm - Saw blade pitch: 22mm - Saw blade thickness: 1.1mm - Wheel diameter: 600mm - Saw blade cooling - Emergency stop - Height of the machine feeder table: 840mm - Automatic retraction of side heads - With ŁPW-3 self-loading feeder - Feeder motors: 0.75kW - Feeder dimensions (L/W/H): 4330x1220x1420mm - Feeder weight: 450kg - Dimensions of additional feeder extension: 2570x1030mm - Machine dimensions (L/W/H): 4910x1620x2000mm - Machine weight: 950kg ADVANTAGES - Smooth feed controlled by a frequency converter - Original DTR documentation + CE certification - With self-loading feeder - Automatic retraction of side heads - ANP-05 controller - Unpainted - Used machine, very good condition Net price: 35900 PLN Net price: 8350 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to significant exchange rate fluctuations)

Condition: used, No. 3197 Vertical log band saw Bögli 1600 Used, the machine has been continuously maintained and modernized Sawing operation was discontinued in summer 2024 For logs up to 1500 mm in diameter Clamping carriage approx. 7650 mm long, 5 support arms Clamping carriage approx. 3000 mm wide The maximum length that was cut is 8000 mm Cutting capacity averaged 55 - 70 solid cubic meters per 8.5 hours 2 core cut-off saws Drive motor 55 kW, 1460 rpm Roller diameter 1600 mm Saw blade maximum width 205 mm, length 10560 mm, thickness 1.65 mm Hydraulic unit replaced in 2007 Chip carriage rollers and shafts replaced in 2011 The system was operated by 3 people Bwsdpovvm Iujfx Afmow Operator cabin with remote control and video surveillance Space requirement approx. 25000 x 10000 mm LW Sale on behalf of customer, ex location near 5020 Salzburg (Austria), without disassembly, transport and assembly Disassembly, loading and transport by us optionally possible Errors in the description and price reserved In order to avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical data, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as viewed” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: new, Year of construction: 2026, CORMAK HBS700 Band Saw The CORMAK HBS700 is a high-performance band saw designed for professional cutting of metal, wood, aluminium, and plastic materials. Thanks to its large guide wheel diameter, powerful 4 kW motor, and robust construction, the HBS700 band saw is an ideal solution for production plants, metalworking workshops, woodworking facilities, and industrial applications. Main Advantages of the Machine Large working capacity – maximum cutting height of 430 mm and cutting width of up to 700 mm allow machining of large and heavy workpieces. High-quality work table – a cast iron, ground, and polished table ensures stable material support and precise cutting. Quick blade tensioning lever – reduces setup time and simplifies blade replacement and maintenance. Wide table tilting range – adjustment from -5° to +45° enables precise angled cuts. Blade tension inspection window – allows continuous monitoring of blade tension without stopping the machine. Constant blade speed of 18 m/s – optimized for cutting materials with different hardness levels. Construction and Technology The CORMAK HBS700 is an industrial-class band saw based on a rigid steel structure and a heavy-duty machine frame, ensuring long service life and resistance to deformation. The large band wheels with a diameter of 680 mm provide smooth operation and stable blade guidance. The machine is powered by a three-phase motor with a power rating of 4.0 kW (S1) / 5.6 kW (S6), allowing efficient operation even when cutting thick and demanding materials. Integrated dust extraction outlets 2 × 100 mm enable effective connection to extraction systems for sawdust and chips, significantly improving workplace cleanliness and safety. Precision and Working Efficiency The large work table measuring 790 × 500 mm, combined with a wide cutting blade (up to 40 mm) and a rigid guide system, ensures high-quality and repeatable cuts even in demanding applications. The operator has full control over cutting direction, angle, and depth. The well-balanced construction minimizes vibration and reduces the risk of cutting errors, ensuring smooth and accurate operation. Applications The CORMAK HBS700 band saw is suitable for: Cutting non-ferrous metals and structural steel, Processing solid wood and laminated timber, Prototype and production work in industrial facilities, Cutting technical plastics and composite materials, Use in technical workshops, tool rooms, and metalworking facilities. Standard Equipment High-voltage release safety switch Precision rip fence Cutting blade 5020 × 25 mm, 10 TPI Optional Equipment Extraction hose Ø100 mm Clamps for dust extraction connection Transport trolley or mobile base Technical Specifications Parameter Specification Wheel diameter 680 mm Maximum cutting height 430 mm Maximum cutting width 700 mm Work table dimensions 790 × 500 mm Bwjdpfx Ajvugtnefmjw Table tilt range -5° to +45° Blade width range 19 – 40 mm Blade length 5020 mm Blade speed 18 m/s Overall dimensions 1090 × 700 × 2430 mm Weight 308 kg Motor power S1 / S6 4.0 / 5.6 kW Dust extraction outlets 2 × 100 mm Power supply 3-phase, 400 V Operating manual (DTR) Included CE declaration Yes

Condition: new, Year of construction: 2026, Vertical Bandsaw with Laser Guide A simple-to-use bandsaw with a durable construction. It allows for precise adjustment of work parameters, which directly impacts cutting efficiency. The quick tensioning lever is also used for quickly removing the blade. Precise cast iron machine table. Bwedjvugwaspfx Afmjw Adjustable table tilt from -10° to 45°. A window for easy reading of the blade tension. Two cutting speeds selected via a stepped pulley. Technical Data: Wheel diameter [mm]: 480 Maximum cutting height [mm]: 280 Maximum cutting width [mm]: 465 Blade width [mm]: 9.5 to 38.1 Blade length [mm]: 3605 Belt speed (2 speeds) [m/s]: 7/14 Worktable angle adjustment [°]: from -10 to +45 Worktable dimensions (L x W) [mm]: 630 x 480 Dimensions (L x W x H) [mm]: 830 x 550 x 2070 Weight [kg]: 162 Motor power [kW]: s1-2.2kW, s6-3.1kW Power supply: 3-phase, 400V Note: The price quoted is the net price. It does not include transportation costs.

Condition: used, Year of construction: 1979, Technical details: throat: 410 mm dimension machine xH: 1,15m x 0,8m x 2,0m m Vertical band saw with saw band welding device. The table is tiltable. Bsdpfx Afju Niu Uemsww *

Year of construction: 1984, condition: used, machine/vehicle number: 25 948, throat: 485 bzw. 1050 mm roller-Ø: 500 mm Bwodpob N Eh Hefx Afmjw passage height: 380 mm table size: Arbeitstisch 780 x 800 mm sawing band length: ueber 2 Laufraeder 3920 - 4050 mm sawing band width max.: 20 mm band speed: 15 - 940 m/min engine: 380 V, 4 kW space needed: 950 x 2130 x 2100 mm weight: 1740 kg

Condition: new, power: 90 kW (122.37 HP), cutting width (max.): 1,100 mm, total height: 4,700 mm, overall weight: 19,000 kg, saw blade length: 10,450 mm, The VTZ PLUS is MEBOR’s exceptionally FAST vertical band sawmill system, designed for high capacity as well as quality-oriented sawing. Its SMART design combines speed, energy efficiency and high recovery of wood. Bodpfxjrlm N Us Afmeww

Condition: used, Year of construction: 2020, Coalza RS400-DH Automatic Vertical Dry Ice Packaging Machine, 2020 Coalza RS400-DH automatic vertical form-fill-seal packaging machine, manufactured in 2020. Serial number 11431. This machine is equipped with volumetric dosing and was configured for packing dry ice. The original Coalza installation layout for this serial number shows a 10 kg dry ice bag application and a bag ejector. The take-away conveyor is indicated as customer-supplied in the original layout and is not included unless separately agreed upon. The machine forms, fills, and seals bags from roll-fed film. The model manual specifies PE and PP film. Controls include a PLC with a touchscreen and temperature-controlled sealing. Technical specifications: Manufacturer: Coalza Model: RS400-DH Serial number: 11431 Year: 2020 Application: Dry ice bagging, original layout for 10 kg bags Dosing system: Volumetric Film: PE and PP Electrical supply: 380 V, 3-phase + neutral + earth, 50 Hz Rated current: 10 A Installed power: 3.8 kW Compressed air: 6 bar; approx. 40 l/min for the basic machine, up to 90 l/min with accessories Bjdo Agq Sdjpfx Afmoww Approximate dimensions: 1,342 × 1,993 × 3,048 mm (W × D × H); installation dimensions may vary RS400 series reference: bag width up to 450 mm, recommended minimum 100 mm; film roll width up to 950 mm; bag length 50–600 mm Manufacturer’s stated RS400 mechanical maximum: up to 50 bags/min; actual output depends on the product, film, and machine configuration Coalza RS400-DH, Coalza packaging machine, dry ice packaging machine, dry ice bagging machine, carbonic ice packaging machine, ice bagging machine, automatic vertical packaging machine, vertical form-fill-seal machine, VFFS packaging machine, volumetric dosing machine, 10 kg dry ice bags, industrial packaging machinery, used packaging machine.

Condition: used, Vertical bandsaw HESKA, type ESA 4 Serial No. 681174, year of manufacture approx. 1985 Roll diameter 420 mm Overhang 400 mm Table size 500 x 500 mm Cutting height 285 mm Saw blade length min. 3200 – max. 3400 mm Saw blade speed, gear stage (1): 15-140 m/min Saw blade speed, gear stage (2): 150-1400 m/min Motor power 1.5 kW Power supply: 380 Volts, 50 Hz - Continuously variable saw blade speed via PIV gearbox with handwheel adjustment and 2 gear stages - Saw table can be swivelled in 2 axes - Machine light Space requirement L x W x H: 950 x 750 x 1820 mm Weight approx. 500 kg Bwodpfsdzqrvox Afmjw Good condition

Condition: ready for operation (used), Year of construction: 2002, machine/vehicle number: AY11051, functionality: fully functional, cutting height (max.): 330 mm, overall weight: 1,500 kg, saw band length: 5,385 mm, saw band width: 100 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS SAWING AREA Sawing direction: Vertical. No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Sawing direction: Vertical Cut to feed roller: max. 230 mm Cut to stop: max. 260 mm Cut width to column: max. 300 mm Total opening: max. 480 mm Cutting height: max. 330 mm Saw band width: max. 100 mm Saw band length: min. 5,385 mm Saw band length: max. 5,485 mm Saw band thickness: min. 0.8 mm Saw band thickness: max. 1 mm Wheel diameter: 915 mm Table width: 1,010 mm Table length: 740 mm Feed roller type: Manual Dust extraction port diameter: 150 mm MACHINE DETAILS Main motor power: 15 kW Connected power: 15 kW Voltage: 400 V Current consumption: 28 A Fuse rating: 32 A DIMENSIONS & WEIGHT Dimensions (L x W x H): 2,000 x 950 x 2,400 mm Weight: 1,500 kg EQUIPMENT CE marking Max. cut to feed roller: 230 mm Max. cut to stop: 260 mm Max. cut width to column: 300 mm Max. total opening: 480 mm Max. cutting height: 330 mm SAW BAND Max. saw band width: 100 mm Min. saw band length: 5,385 mm Max. saw band length: 5,485 mm Min. saw band thickness: 0.8 mm Max. saw band thickness: 1 mm TABLE AND WHEELS Wheel diameter: 915 mm Table width: 1,010 mm Table length: 740 mm FEEDING AND DUST EXTRACTION Feed roller type: Manual Dust extraction port diameter: 150 mm MACHINE DETAILS GENERAL Year of manufacture: 2002 Color: Blue Serial number: AY11051 CE marking: Yes ELECTRICS AND DRIVE Main motor power: 15 kW Connected power: 15 kW Voltage: 400 V Current consumption: 28 A Fuse rating: 32 A Bwodpfx Afo Af Hk Ujmew DIMENSIONS AND WEIGHT Overall length: 2,000 mm Overall width: 950 mm Overall height: 2,400 mm Weight: 1,500 kg

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. Bsdj Adtyyjpfx Afmoww TECHNICAL DETAILS GENERAL DATA Manufacturer: SAMUR Type: S-1000 Machine number: 186 Machine type: Metal bandsaw PERFORMANCE DATA Speed: 9–336 rpm WORK TABLE Table dimensions: 610 × 610 mm MACHINE DETAILS DIMENSIONS AND WEIGHT Length: 1,700 mm Width: 660 mm Height: 1,800 mm Weight: 500 kg EQUIPMENT Welded band device

Condition: good (used), Year of construction: 1981, machine/vehicle number: 24802, functionality: fully functional, Used band saw Manufacturer: MÖSSNER Bodpfxj Aay Ate Afmjww Model: REKORD SSF /501 Year of manufacture: 1981

Condition: new, Year of construction: 2024, NEW Grundfos - The pump is fitted with a 3-phase, fan-cooled, permanent-magnet, synchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously Bwodpfsyug Hxex Afmsw variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The Grundfos Eye indicator on the operating panel provides visual indication of pump status: "Power on": Motor is running (rotating green indicator lights) or not running (permanently green indicator lights) "Warning": Motor is still running (rotating yellow indicator lights) or has stopped (permanently yellow indicator lights) "Alarm": Motor has stopped (flashing red indicator lights). Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box has a number of inputs and outputs enabling the motor to be used in advanced applications where many inputs and outputs are required: • two dedicated digital inputs • three analog inputs, 0(4)-20 mA, 0-5 V, 0-10 V, 0.5 – 3.5 V • 5 V voltage supply to potentiometer and sensor • one analog output, 0-10 V, 0(4)-20 mA • two configurable digital inputs or open-collector outputs • two Pt100/Pt1000 inputs • LiqTec, dry-running protection sensor input • Grundfos Digital Sensor input and output • 24 V voltage supply for sensors • two signal-relay outputs (potential-free contacts) • GENIbus connection • interface for Grundfos CIM fieldbus module.

Condition: good (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 1,016 mm, travel distance Y-axis: 559 mm, travel distance Z-axis: 660 mm, controller manufacturer: Milltronics, controller model: Centurion 7, total height: 2,740 mm, total length: 3,050 mm, total width: 2,440 mm, table width: 610 mm, table length: 1,016 mm, overall weight: 7,250 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 18,000 W, spindle nose: CAT 40, number of spindles: 1, number of slots in tool magazine: 24, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, 2007 Milltronics VM22 CNC Vertical Machining Centre Used 2007 Milltronics VM22 vertical machining centre for sale. Centurion 7 control, 1016 x 559 x 660mm travels, 8,000 rpm spindle, 24-tool ATC and tooling included. Manufacturer: Milltronics Model: VM22 Machine Type: 3 Axis Vertical Machining Centre Year: 2007 Control: Centurion 7 Includes: Large Selection of Tool Holders Machine Description Used 2007 Milltronics VM22 CNC Vertical Machining Centre available for sale. A substantial American-built 3-axis vertical machining centre offering a generous working envelope, 24-station automatic tool changer, 8,000 rpm spindle and the well-established Milltronics Centurion 7 CNC control. This particular machine is a VM22 Series B and is supplied with a large selection of tooling, making it an attractive package for general precision engineering, subcontract machining, toolroom work, mould work and batch production. The VM22 provides approximately 1,016mm X-axis travel, 559mm Y-axis travel and 660mm Z-axis travel, combined with a large 1,143 x 610mm table. Technical Specifications Manufacturer: Milltronics Manufacturing Company Model: VM22 Series: B Year: 2007 Machine Type: CNC Vertical Machining Centre / Vertical CNC Milling Machine Control: Milltronics Centurion 7 Number of Axes: 3 Serial Number: 9868 Axis Travels Bwodpfjz Rqcysx Afmjw X-Axis Travel: Approx. 1,016mm / 40" Y-Axis Travel: Approx. 559mm / 22" Z-Axis Travel: Approx. 660mm / 26" The 40" x 22" x 26" working envelope is one of the defining specifications of the VM22. Worktable Table Size: Approx. 1,143 x 610mm / 45" x 24" The large table and 22" Y-axis travel provide useful capacity for larger components, multiple vices and production fixtures. Spindle Maximum Spindle Speed: Approx. 8,000 rpm Spindle Power: Approx. 24 HP / 18kW peak rating Spindle Taper: 40 Taper / CAT40-type specification The combination of a 40-taper spindle and substantial machine construction makes the VM22 suitable for both general milling and heavier material-removal work. Automatic Tool Changer Tool Capacity: 24 Tools The machine is equipped with a 24-position automatic tool changer, providing sufficient tooling capacity for multi-operation machining without frequent manual tool changes. Milltronics Centurion 7 CNC Control The machine is equipped with the Milltronics Centurion 7 CNC control. The Centurion series became particularly popular in toolrooms and general engineering companies because of its conversational programming capability while still supporting conventional CNC/G-code programming. This makes the machine particularly suitable for: One-off components Small-batch machining Toolroom work Subcontract machining Prototype manufacture Production milling Operators transitioning from manual to CNC machining Tooling Included A large selection of tooling is included with the machine. Electrical Specification Input Voltage: 400V Phase: 3 Phase Frequency: 50/60Hz Full Load Current: Approx. 50A Largest Load: Approx. 40A Approximate Machine Size & Weight Machine Length: 3,050mm Machine Width: 2,440mm Machine Height: 2,740mm Approximate Machine Weight: 7,250kg

Condition: excellent (used), Year of construction: 2010, operating hours: 32,300 h, functionality: fully functional, travel distance X-axis: 660 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, nominal power (apparent): 11 kVA, controller manufacturer: Hurco, controller model: WINMAX, workpiece weight (max.): 340 kg, table width: 356 mm, table length: 762 mm, table load: 340 kg, overall weight: 2,900 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 32,300 h, spindle motor power: 11,000 W, spindle nose: CAT 40, number of spindles: 1, number of slots in tool magazine: 20, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, 2010 Hurco VM10 CNC Milling Machine with CAT 40 Spindle, WINMAX Control 2010 Hurco VM10 Vertical Machining Centre with WINMAX CNC Control, CAT 40 spindle, 20-tool ATC and premium software package. Good condition. Delivery throughout Ireland, UK & Europe. Manufacturer: Hurco Model: VM10 Machine Type: 3 Axis Vertical Machining Centre Year: 2010 Hours: 32,300hrs Control: WINMAX Condition: Excellent For sale is a 2010 Hurco VM10 Vertical Machining Centre in good working condition, equipped with the renowned Hurco WINMAX CNC Control (Version V08.01.04.33) and a CAT 40 10,000rpm spindle. The Hurco VM10 is recognised worldwide as one of the most reliable and user-friendly vertical machining centres for precision CNC milling, toolroom machining, prototype manufacture, small batch production, mould making, and general engineering. With 32,300 machine hours, this machine remains an excellent opportunity for engineering companies looking for an affordable, high-quality used CNC machining centre from one of the industry's most respected manufacturers. Please note: No tooling is included with the machine. Technical Specifications Manufacturer: Hurco Model: VM10 Year: 2010 Machine Type: Vertical Machining Centre CNC Control: Hurco WINMAX Mill V08.01.04.33 Machine Hours: 32,300 Hours X Axis Travel: 660 mm Y Axis Travel: 406 mm Z Axis Travel: 508 mm Table Size: 762 × 356 mm Maximum Table Load: 340 kg Spindle Taper: CAT 40 Spindle Speed: 10,000 RPM Bedpsziu Hzjfx Afmeww Spindle Motor: 11 kW (15 HP Peak) Automatic Tool Changer: 20 Station ATC Rapid Traverse (X/Y/Z): 24 m/min Machine Weight Approx.: 2,900 kg Condition: Excellent Working Condition Tooling: No Tooling Included Installed WINMAX Software Options This machine is equipped with an excellent range of factory software options including: Advanced Verification Graphics DXF File Import NC Productivity Package Industry Standard NC Programming UltiPockets Rigid Tapping Helical Ramp Milling 3D Mold Package NC Conversational Merge Swept Surface Machining Select Surface Finish Quality These options significantly enhance programming flexibility, machining accuracy and production efficiency, making the VM10 suitable for both conversational programming and full ISO/G-Code machining. Notes: *Specifications are given in good faith but not guaranteed* Key Features Hurco WINMAX Conversational CNC One of the easiest CNC controls to learn and operate, allowing operators to quickly produce components without extensive G-Code programming. CAT 40 High-Speed Spindle The industry-standard CAT 40 spindle provides excellent tooling availability and rigidity for machining steel, aluminium, plastics, composites and engineering materials. 20 Station Automatic Tool Changer Fast automatic tool changes reduce machining time and improve production efficiency. Compact High-Performance Design Large machining travels combined with a compact footprint make the VM10 ideal for workshops where floor space is at a premium. High-Speed Precision Machining The 10,000 RPM spindle combined with rapid traverse rates enables efficient production while maintaining excellent surface finishes. Proven Hurco Reliability Hurco machining centres are recognised worldwide for their durability, ease of maintenance and excellent resale value. Machine Condition: Excellent Condition Fully operational Ready for immediate production No tooling included in sale Inspection welcome