Used Vertical Balancing Machine for sale (66,078)

Condition: used, Year of construction: 2006, functionality: fully functional, travel distance X-axis: 1,016 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, rapid traverse X-axis: 25 m/min, rapid traverse Y-axis: 25 m/min, rapid traverse Z-axis: 25 m/min, controller manufacturer: HAAS, controller model: HAAS, table width: 1,219 mm, table length: 547 mm, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 21, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The machine is set up in our warehouse and can be inspected under power! The machine is equipped with: chip conveyor, internal cooling, programmable coolant nozzle, 21-position tool changer, coolant tank, and original documentation. Gijdpfsyybimox Abkju

Condition: like new (used), Year of construction: 2022, functionality: fully functional, HOLZ-HER Evolution 7405 Connect Manufacturer: HOLZ-HER Model: Evolution 7405 Connect Machine type: CNC woodworking / vertical CNC machining center Year of manufacture: 2022 Serial number: XXXX Control system: HOLZ-HER Software: Campus V7-EVO Operating voltage: 400 V / 50–60 Hz Power consumption: 10.3 kW Enclosure: enclosed cabin Color: gray Number of previous owners: 1 Spindle / Milling unit Spindle speed: 1,000 – 24,000 rpm Tool interface: HSK-F 63 Tool magazine: 6 positions Milling unit: Type 7830 Max. tool diameter: 110 mm XL drilling unit: 1.7 kW Drilling unit: 19 spindles Angle gearbox: 7869 Working area / Workpiece data Max. processing dimensions: 3,200 x 1,190 x 70 mm Min. processing dimensions: 200 x 70 x 8 mm X-axis max.: 3,200 mm Y-axis max.: 920 mm Max. workpiece weight: 75 kg Machine data Machine weight: approx. 2,000 kg Overall dimensions L x W x H: 3,800 x 1,800 x 2,500 mm Equipment Campus V7-EVO software Campus Standard macro package Handheld device for remote control of the machine 21.5" flat screen Keyboard with cable 2D barcode scanner Laser workpiece length measurement Milling unit 7830 with 6-position magazine XL drilling unit 1.7 kW with 19 spindles Angle gearbox 7869 Workpiece support with infeed table Vacuum system ECO Gjdpfozcm Ufsx Abksiu Automatic central lubrication Air conditioning unit for switch cabinet cooling Enclosed safety cabin Comments on condition: Machine was not connected during inspection in May Test run therefore not currently carried out Spindle test run not currently carried out Operating hours could not be read due to power outage Machine is dirty, cleaning recommended Maintenance / safety inspection without proof, performance recommended Equipment, tools and accessories are in the processing area, the processing area could not be opened due to power outage Functional test and test run recommended before commissioning Check software for updates and currency Machine documents / purchase invoice were available in copy The machine can be connected and tested by Montrasio Werkzeugmaschinen GmbH.

Condition: used, Year of construction: 2005, Mazak Variaxis 730-5X CNC Vertical Machining Centre. S/No. 567181684 (2005). Country of Origin: Japan Gijdpfx Absy Sha Askju Location: These lots are located in Dundee, Scotland, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described.

Condition: good (used), Year of construction: 2002, Ref. -No.: 10633 Manufacturer: ANAYAK Type: VH Plus 2000-MG Year of construction: 2002 Type of control: CNC-Steuerung Control: Heidenhain Storage location: Halberstadt Country of origin: Germany serial number: M200XXX X-Travel: 2000 mm Y-Travel: 1500 mm Z-Travel: 1500 mm Gjdpszc D Ensfx Abksiu No. Of Working Stations: 90 Control: 106.253 H machine: 93.170 H Program run: 41.859 H Head and turntable: 1600 x 1450 mm

Condition: ready for operation (used), Year of construction: 1999, Chiron FZ 12 W High Speed Year: 1999 Control: Siemens Sinumerik Type: Vertical machining center with pallet changer Axes travel X axis: approx. 550 mm Y axis: approx. 300 mm Z axis: approx. 425 mm Spindle Spindle taper: SK40 Spindle speed: approx. 10,000 to 10,500 rpm Spindle motor power: approx. 9 to 15 kW Tool system Tool changer capacity: approx. 12 to 20 positions Max tool weight: approx. 4 kg Tool holder: SK40 Table Table size: approx. 660 x 350 mm Max workpiece weight: approx. 150 kg Table type: pallet changer system Electrical data Voltage: 400 V or 230 V Frequency: 50 to 60 Hz Power consumption: approx. 11 kVA Current: approx. 15 A Machine dimensions and weight Weight: approx. 4000 kg Length: approx. 3000 to 3500 mm Gisdpfxoy E Ihgo Abkeu Width: approx. 2500 to 3000 mm Height: approx. 2500 to 3000 mm Coolant system Manufacturer: Knoll Type: 340 K 1 600 Year: 1999

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 15744, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain iTNC 530, table load: 1,500 kg, TECHNICAL DETAILS Travel range, X-axis: 800 mm Travel range, Y-axis: 600 mm Travel range, Z-axis: 600 mm Table length: 1,000 mm Table width: 560 mm Table load: max. 1,500 kg Spindle connection: HSK63 Tool changer: 30 positions Rapid traverse rate: 35 m/min Acceleration: 5 m/s² MACHINE DETAILS Control system: Heidenhain iTNC 530 Gisdpfx Aszcymzjbksu Dimensions & Weight Dimensions (L x W x H): 4,200 x 2,500 x 2,800 mm Weight: 7,200 kg Total connected load (including cooling unit): 42 kVA

Condition: not inspected (used), Year of construction: 1994, travel distance X-axis: 550 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 426 mm, overall weight: 6,500 kg, number of slots in tool magazine: 20, Fanuc OM control unit BT40 spindle, maximum spindle speed 8,000 RPM 20-tool changer Gisdpfozbal Isx Abkou 2 tables Nikken rotary table

Year of construction: 1986, condition: excellent (used), functionality: fully functional, Technical details spindle diameter 135 mm x-travel 1000 mm y-travel 700 mm z-travel 300 mm cross rail adjustment - vertical 780 mm distance between table/spindle 1000 mm table surface area 1100 x 842 mm distance between columns 1100 mm table load 1500 kg tool taper SK 45 spindle turning speed range 2400 U/min spindle drive 5,9 kW feed range 1 - 6000 mm/min weight of the machine ca. 10,6 t Additional information Retrofit / overhauling in May 2005 (with geometric measurement): - New Heidenhain iTNC-530 control - New electronics - New Siemens servomotors - Heidenhain glass scales - Revision of drilling spindle unit Giodjzabqvopfx Abksu (total costs 118,436.00 EUR) Equipment: Infrared measuring probe m&h 38.10-MINI Electron. Handwheel Various tool holders Transport dimensions: - Machine (LxWxH) 3500 x 2600 x 2750 mm - Control cabinet (LxWxH) 2300 x 600 x 2300 mm - Hydraulic (LxWxH) 800 x 600 x 1000 mm

Condition: good (used), Year of construction: 2012, travel distance X-axis: 1,800 mm, travel distance Y-axis: 700 mm, Vertical Machining Center Machine type: DMG DMF 180|7 Control system: Siemens 840 D solutionline Year of manufacture: 2012 Godpfx Abey Rk Nweksiu TECHNICAL DATA: Travel distances: X-axis: 1,800 mm Y-axis: 700 mm Z-axis: 700 mm Feed rate (X/Y/Z): 40 m/min Rapid traverse (X/Y/Z): 40 m/min Spindle speed range: 20 - 14,000 rpm Spindle motor: 18.9 / 14 kW Tool holder: SK 40 Tool positions: 30 Table size: 2,100 x 700 mm Max. workpiece weight: 1,500 kg Workpiece height: 550 mm Connected load: 19 kW Space requirement (LxWxH): 5.533 x 4.231 x 2.693 m Machine weight: 13,000 kg Features: Chip conveyor

Condition: good (used), Year of construction: 2016, Vertical Machining Center Machine type: MTCut MVY150H Control: Heidenhain iTNC 530 SmarT.NC Year of manufacture: 2016 Spindle operating hours: 7,140 h Power-on hours: 21,774 h New spindle TECHNICAL DATA: Travel distances: X-axis: 1,500 mm Y-axis: 700 mm Z-axis: 810 mm Rapid traverse (X/Y/Z): 68 m/min. Godpfxsx Uqrgs Abkoiu Max. spindle speed: 18,000 rpm Torque: 162 Nm Drive power: 34 kW Tool holder: HSK 63 Tool stations: 40 Table size: 1,500 x 800 mm Features: Chip conveyor Through-spindle air Electronic handwheel Chip flushing gun Internal coolant supply (IKZ): 40 bar Paper band filter Measuring probe: TS460

Condition: used, Pallet with 18H7 T-slots, suitable for DMG DMC 100 H and DMG DMC 100 U as well as DMC 125H/U Duoblock. Giodpfx Ajqx Uh Nebksu More than 10 pallets available.

Condition: good (used), Year of construction: 2001, functionality: fully functional, Technical details grinding length 4200 mm grinding width 1300 mm workpiece height 550 mm Control SIEMENS 840 D magnetic clamping plate 4200 x 1300 mm segment head diameter 1400 mm grinding motor turning speeds up to 320 U/min. grinding motor 306 kW weight of the machine ca. 50,0 t Additional information Segment dimensions: 120/106 x 41 x 250 mm Number of segments: 1 set = 26 pieces Grinding motor feed: 0.5 - 35 m/min, infinitely variable Grinding motor feed: - in steps: 0.002 - 1 mm continuous: up to 5 mm/min. infinitely variable Equipment: * CNC-control SIEMENS Sinumerik 840 D Giedpfx Aoy U Uqgobkju * Automatic hydr. swivelling of the grinding motor from hollow to cross grinding * NC-controlled adjustment of the Marposs measuring head by means of precision support. - new grinding dimensions can be entered into the control, whereby the the grinding head automatically adjusts to the corresponding height. * Dresser with adjustment axis in the machine bed * Coolant system * Electro-magnetic table * Switch cabinet * Oil mist extraction * Documentation Dimensions (length x width x height) Bed: 11800x2200x1400 mm, weight 27500 kg Grinding head: 3000 x 2500 x 3100 mm, estimated weight 14 t 2 x Oil mist extraction: 1200 x 800 x 2000 mm each Control panel: 1200 x 800 x 400 mm Small control cabinet: 1400 x 1400 x 800 mm 2 x gears each 1200 x 800 x 500 mm Control cabinet: 1600 x 800 x 2000 mm Control cabinet: 3400 x 600 x 2400 mm

Condition: excellent (used), Year of construction: 2002, HAAS VF10 X AXIS 3048 MM Y AXIS 813 MM Z AXIS 760 MM TABLE WEIGHT MAX 1800 KGS 3 AXIS HAAS CONTROL THIS IS ALL THE DETAILS I HAVE AT THE MOMENT MORE WILL FOLLOW CHEAP MACHINE - MUST BE LOADED FROM SITE AND STRAIGHT ON TO NEW DESTINATION . MORE PHOTOS AND A VIDEO IS AVAILABLE Gijdpey Epkmjfx Abkeu

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, We are selling a beautiful and well-maintained machining center from Fehlmann, a Picomax 60-M HSC. Machine data: Manufacturer: FEHLMANN Machine type: PICOMAX® 60-M Machine number: 14508674 Year of manufacture: 2008 Control system: Heidenhain iTNC 530 Operating hours: 12,799 Spindle hours: 5,303 Technical details: Travel in X-axis: 505 mm Travel in Y-axis: 355 mm Travel in Z-axis: 610 mm Spindle speed: 50 - 20,000 rpm Number of tool positions in the tool magazine: 24 Tool holder: SK30 Dimensions and weight: 2.0 m × 1.7 m × 3.0 m // 3350 kg Accessories for the machine: - Renishaw touch probe system OMP 40-2 with spindle adapter - Cold air nozzle for M-function, switchable - Direct path measurement system with compressed air supply - Thermal compensation - Compensation of spindle and thermal expansion - Ethernet interface - Laser system NT incl. blow-off nozzles for tool measurement and breakage check - 4th/5th axis FEHLMANN ATS 160 CNC automatic indexing table with double clamping in both axes and EROWA quick-change chuck ITS - Machine light - Spindle cooler - Handwheel - Coolant system with chip drawer and fine chip insert - Tools in the lower cabinet - Transport securing - Operating and programming manual (also for optional equipment) Software options: - HSC-SETUP cycle (axis optimization) - Potential equalization milling spindle - Alignment cycle for automatic alignment of the ATS - Engraving of uppercase and lowercase letters and special characters - Rotary table machining (in mm/min) - Fast 3D machining, 5-axis interpolation, spline interpolation Godpfx Aezcqtrebkoiu - Extended energy-saving function and warm-up spindle + axes

Condition: good (used), Year of construction: 2016, Traverses X Y Z: 610 x 508 x 610mm, Table 762 x 508mm, Gedpfsy Ex Hajx Abksiu Spindle speed 40 – 8000 rpm, Spindle taper CAT40, 24 ATC, Rapid feedrate 24/30m/min, Spindle motor power 12/9kW, Low volt light, Hurco control, coolant.

Condition: used, Year of construction: 2005, Hedelius C60-2500 CNC machining center with 4th axis - spindle running time: 9,546 h Manufacturer: Hedelius Type: C60-2500 Year of manufacture: 2005 Control system: Heidenhain Location: Bremen Technical data: Travel in X-axis: 2,500 mm Travel in Y-axis: 620 mm Travel in Z-axis: 500 mm Table clamping area: 3,000 x 600 mm Spindle speed: 8,000 rpm Rapid traverse / feed rate: up to 30,000 mm/min Machine weight: approx. 12,000 kg Operating hours: Control system ON: 40,045 h Machine ON: 44,393 h Program running time: 10,019 h Spindle running time: 9,546 h Equipment: Heidenhain CNC control system CNC axis Godpfjzc Rlhsx Abkjiu Full enclosure Electronic handwheel Coolant system Work area lighting Chip conveyor Description: For sale is a Hedelius C60-2500 CNC machining center with Heidenhain control system and 4th axis. The machine is in operation and can be inspected while powered on, by prior arrangement. With an X-axis travel of 2,500 mm and a table clamping area of 3,000 x 600 mm, the machine is particularly suitable for machining long workpieces in mechanical, tool, fixture, and steel construction. The comparatively low spindle running hours of only 9,546 hours are particularly noteworthy. The machine has a 4th axis, providing extended machining capabilities while reducing setup times. The Hedelius C60 stands for robust German engineering quality, high precision, and a long-lasting design. Inspection is possible at any time in Bremen by appointment. _____ Our general terms and conditions apply. In addition, the seller is not liable for typographical or data transmission errors. The information and images have been provided by the owner and released for publication. The appearance of the offered items corresponds to their age and the images shown. The technology and wear of the offered items are consistent with their age. Used machines are sold exclusively to commercial enterprises and without warranty.

Condition: used, Year of construction: 2013, HEDLIUS C50 C50/40/530/1800/8 Machining Center ==> Spindle operating hours: 8,997 h Manufacturer: HEDLIUS Model: C50 Year of manufacture: 2013 Control system: Heidenhain Machine weight: approx. 5,500 kg Technical data Travel X: 1,800 mm Travel Y: 510 mm Travel Z: 480 mm Table size: approx. 2100 x 510 mm Feed rate: up to 30,000 rpm Spindle speed: up to 8,000 mm/min Spindle operating hours: 8,997 h Program running time: 10,446 h Giedpjzc Rctofx Abkeu Equipment Heidenhain CNC control system Fully enclosed machining center Central lubrication Coolant system Electronic handwheel Tool magazine Documentation available Description For sale is a well-maintained HEDLIUS C50 CNC machining center from 2013. The machine is in very good condition and can be inspected while powered on after prior arrangement. With an X-axis of 1800 mm, the machine is ideally suited for machining long workpieces in tool, machine, and fixture construction. The relatively low spindle operating hours of only 8,997 hours are particularly noteworthy. The machine has a Heidenhain control system and reaches spindle speeds of up to 8,000 rpm. The HEDLIUS C50 stands for high precision, stability, and reliability "Made in Germany" and is ideally suited for both single-part and series production. Inspection: Possible by appointment in Bremen. _____ Our general terms and conditions apply; furthermore, the seller is not liable for typographical or data transmission errors. The information and images were provided to us by the owner and released for publication. The appearance of the offered items corresponds to their age and the images shown. The technology and wear of the offered items are in accordance with their age. Used machines are sold exclusively to commercial enterprises and without warranty.

Condition: used, Year of construction: 2012, turning diameter 320 mm turning height 750 mm Control Siemens max. turning speeds 4500 min/-1 drive capacity - main spindle 26,8 / 20,9 kW max. torque 256 / 200 Nm spindle bore 52 mm spindle head KK A6 (DIN 55026) chucking diameter max. 315 mm number of tool places 8 Pos. tool taper Capto C5 max. workpiece diameter 50 mm max. workpiece weight 0,5 kg x-axis 450 mm z-axis 300 mm rapid traverse x 45 / z 40 m/min total power requirement 68,3 kW Giedjzbmzpjpfx Abkeu weight of the machine ca. 11,0 t dimensions of the machine ca. L 3,7/4,2 x B 1,6 x H 3,0 m In our opinion, the machine is in very good condition condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: refurbished (used), Overhauled Mazak main spindle for VTC 200 or VTC 300 for sale. The spindle has been fully overhauled, spindle bearings and intermediate sleeves have been replaced. The taper has been reground. Subsequently, it has been balanced. The maximum speed is 12,000 rpm. We have additional overhauled Mazak spindles in stock; feel free to send us your inquiry. This is an exchange spindle, meaning a core return is required. If you have any further questions, we are at your disposal. Gijdpovdkdijfx Abkju

Condition: used, Year of construction: 2010, x-travel 500 mm y-travel 450 mm z-travel 400 mm control iTNC 530 Heidenhain turning speed range - main spindle 20 - 10.000 min/-1 power capacity - main spindel 13 / 9 kW max. Torque 83 / 57 Nm tool taper SK 40 DIN 69871 table surface area 700 x 500 mm max. table load 500 kg T-slots 7x 14 x 63 mm number of toolpositions 60 pos. max. tool weight 6 kg max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 300 mm change-time tool to tool 1,6 sec change-time chip to chip 8,0 sec rapid traverse 24 m/min Feed force ( X / Y / Z ) 4,5 kN feed speeds 1 - 24.000 mm/min total power requirement 26 kVA weight of the machine ca. 4,5 t dimensions of the machine ca. 4,5 x 3,5 x 2,3 m CNC - Milling Machine Vertical DECKEL MAHO - DMU 50 - 3 Axis Gijdpfx Aey E Tv Asbkou - only ca. 8.097h Spindle-Hrs. - Backup package for power outages - DXF import - incl. workbench - incl. tool cabinet - incl. cabinet for SK 40 tool holders - incl. approx. 63 SK 40 tool holders

Condition: like new (used), Year of construction: 2020, functionality: fully functional, travel distance X-axis: 610 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 406 mm, rapid traverse X-axis: 31 m/min, rapid traverse Y-axis: 31 m/min, rapid traverse Z-axis: 31 m/min, controller manufacturer: HAAS, controller model: CNC Control, total height: 2,616 mm, total length: 2,965 mm, total width: 2,912 mm, table width: 400 mm, table length: 400 mm, table load: 227 kg, rotary table diameter: 400 mm, overall weight: 5,400 kg, spindle speed (max.): 15,000 rpm, operating hours of spindle: 4,615 h, coolant supply: 30 bar, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 50, tool length: 305 mm, tool diameter: 64 mm, tool weight: 5 g, Equipment: documentation/manual, rotational speed infinitely variable, Well-equipped and in excellent condition! That’s what this HAAS UMC-500SS offers. The machine comes from a one-man business and has always been exceptionally well maintained. Additional options & accessories: - 15,000 RPM, BT40 spindle - 50-tool magazine - Internal cooling - 30 bar - Air connection through the table for pneumatic clamps. - Chip conveyor - Electronic handwheel - Air through the spindle - Expansion of the control memory to 32 GB. - Filter for emulsion. Godpfx Abey Tmp Eskoiu - Programmable coolant nozzle - Option for high-speed machining in the control system. - Extra M-codes - Dynamic work offset and TCPC.

Condition: ready for operation (used), Year of construction: 2011, Feeler QMP-23A 5 Axis Vertical Machining Centre Model: QMP-23A Fanuc Series Oi-MD Control Remote Electronic Hand Wheels 5 Axis Trunnion Table Travels: X: 580mm (48m/min) Y: 420mm (48m/min) Z: 510mm (48m/min) Spindle Nose to Table Surface: 80 – 590mm Spindle Centre to Column Surface: 510mm Table Surface to Floor 820mm Table Centre to Column Surface: 245 – 665mm GANRO TR-150S (TRS Range) Y Axis Tilting Rotary Table Gijdpfx Absygct Eokou 150mm Capacity YOM: 2015 *For sale with Jet Machinery Ltd* Stock No: 79020 Serial No: VKC064 Price: £24,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Working travels 860 x 560 x 600 mm Table size 910 x 500 mm Gisdpfx Absq Dlcijkeu Spindle taper SK40 Spindle speeds -10000 rpm Tool changer 24 Pos. Control HEIDENHAIN iTNC-530 with dividing head Coolant through spindle MARCELS MASCHINEN CH

Condition: used, Year of construction: 2004, Technical details: Gsdpoxc E H Sefx Abkoiu max. wheel diameter: 200 mm gear width: 60 mm max. module: 7 weight of the machine ca.: 15 t table diameter: 180 mm table turning speeds: 100 U/min hob turning speeds: 750 U/min Machine in good condition, without feed, without automation Available 24.08.2024 *

Condition: good (used), Year of construction: 2014, functionality: fully functional, Hurco VM 20 i, Year of manufacture: 2014, Control system: Winmax, Travel range X/Y/Z: 1016/508/400 mm, Tool changer: 24-position, Tool holder: SK 40, Spindle speed: up to 12,000 rpm, Chip conveyor, Gijdpfx Abszc Icweksu Approximately 11,000 operating hours.