Used Traub Tna 600 for sale (89)

Year of construction: 1997, operating hours: 54,646 h, condition: used, Traub TNA500 Serial No. 253 Dkedpfoyt Slwjx Acqjr Spindle speed: 2800 rpm 12-position tool turret Equipped with driven tools Power: 46 kVA

Condition: used, Year of construction: 2010, controller manufacturer: Mitsubishi, controller model: TX8i, _____ Description: Year of manuf. : 2010 Control : Mitsubishi TX8i Turning diam. : 250 mm Turning length : 450 mm Mainspindle: Technology:Belt-driven spindle Speed:4.000 rpm Power (max.):11 kW Torque (max.):280 Nm C-Axis:0,001° Barcapacity:65 mm Workpiececlamping:Hainbuch Spanntop Gr. 65 Djdpfszr Th Aox Acqekr Toolcarrier (X/Y/Z): Technology:Turret with 12 Stations Taper:VDI 30 Tooldrive:4.000 rpm, 4 kW, 16 Nm Movement in X/Y/Z:210/70/450 mm Rapid travers in X/Y/Z:15/10/18 m/min Tailstock: Technology:Hydraulic driven Stroke:60 mm Sleeve-ø:70 mm Cone:MK4 Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Internal cooling unit with Paperbeltfilter and High-pressure, 20 bar Rawmaterialfeed:Barloader, FMB SL 80 S Finished part removal:Parts catcher with conveyor belt Oilmistseparation:Electrostatic Extraction, LTA AC 3001 Further Accessory:Misc. used static Toolholder

Condition: used, Year of construction: 1996, max. turning diameter 395 mm Max. Turning length 750 mm control System TX 8H max. Spindle speed 3.150 U/min. CNC lathe | TRAUB - TNA 400 Dodoxbtqvepfx Acqjkr The machine is in a well-maintained condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags:TNA400 | TNA-400

Condition: used, Year of construction: 1997, max. turning diameter 460 mm Max. Turning length 1.000 mm control System TX 8F max. Spindle speed 2.800 U/min. Dksdpfx Acsxbtpxsqer CNC lathe | TRAUB - TNA 500 The machine is in a well-maintained condition. The machine videos from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags:TNA500 | TNA-500

Condition: used, Year of construction: 1987, operating hours: 80,678 h, functionality: fully functional, Description follows Dkjdpex A Hl Asfx Acqsr

Condition: used, Year of construction: 2001, turning diameter 340 mm turning length 750 mm control SYSTEM TX 8H spindle passage 80 mm swing over plan sled 530 mm greates pass round over bed 665 mm turning speed range - main spindle 3.150 min/-1 drive capacity - main spindle 22 kW number of tool places 12 Pos. In our assessment, the machine is in good used condition and can be inspected under power by appointment. Two machines are available. Price per unit. Machine 1: - Images 1-5 - Operating hours approx. 55,790 h Machine 2: - Images 6-10 - Operating hours approx. 54,347 h Dkodpjxwdw Eefx Acqsr Technical Features & Accessories: - Y-axis - Accessory package with rigid and driven tool holders - Chip conveyor Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: used, Year of construction: 1999, Technical details: turning diameter over bed: 400 mm turning dia. over face-slide: 250 - 300 mm turning length: 450 mm Djdpfozguk Isx Acqjkr longitudinal traverse (z-axis): 450 mm facing movement (x-axis): 210 mm control: TX8H spindle passage: 65 mm revolution per minute: 5.000 U/min feed:: 0,001 - 5.000 mm/min. tool turret - number of stations: 12 operating hours - idle run: - h operating pressure: 6 bar total power requirement: 36 kW Weight approx.: 8 t dimension machine xH: 3,0 x 1,8 x 2,0 m dimensions of hydaulic: 0,8 x 0,6 x 1,2 mm

Year of construction: 2002, condition: ready for operation (used), A relatively lightly used Traub CNC universal lathe is available. Spindle bore: 82mm, max. chuck diameter: 315mm, turning length: 750mm, X/Z travel: 360mm/750mm, Z-axis travel: +/-60mm, rapid traverse: 20m/min. Machine dimensions X/Y/Z: approx. 3250mm/1900mm/2300mm, weight: approx. 7800kg, operating hours: approx. 21812h. Documentation available. An on-site inspection is possible. The image is for reference only. Dedpfozhnrnex Acqjkr

Condition: new, 3 safety windows suitable for CNC lathe TRAUB TNA 300 TNA 400 TNA 500 TNC 42 TNC 65 Size: 660 x 480 mm Price: €500.00 / unit net Delivery time: immediately, subject to prior sale Djdpsw Edq Dsfx Acqekr Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Year of construction: 2005, condition: good (used), 7-position tool holder for CNC lathes Manufacturer: TRAUB, Model TNA 480, tool holder size VDI 40. Also compatible with SAUTER tool turrets with VDI 40 mounting. 7-position horizontal tool holder, positions no. 3/4/5/6/7/8/9 for drilling and milling, price per piece: 550,- € Dkedpfxohwnfke Acqer 2-position horizontal tool holder, positions no. 1 and 2 for tapping, price per piece: 600,- € 1 NC drilling chuck VDI 40, clamping range 1-13 mm, price: 100,- € 1 NC drilling chuck VDI 40, clamping range 2.5-16 mm, price: 150,- €

Condition: good (used), Year of construction: 1990, functionality: fully functional, Traub CNC turning center TNA480, TX8D, year of manufacture 1990, serial number >550. C-axis, rotary tool drive, 1 turret VDI40, tailstock, chip conveyor, hollow cylinder chuck, 3-jaw chuck KNCS315. Good condition, ready for operation. Machine geometry has been checked and corrected/adjusted. Scrapers and belts have been inspected, replaced, maintenance performed after 4000 operating hours. The photos were taken in the production environment; the machine will be cleaned and inspected further. The machine can be inspected while powered on. Djdpszcdgfofx Acqekr

Condition: excellent (used), Year of construction: 2001, operating hours: 47,600 h, machine/vehicle number: 325, System: TX8H Spindle passage: 80 mm Turning length max: 750mm Turning diameter: 340mm Power: 22kw Number of tool holders: 12 Dksdjh Dzqlspfx Acqjr Shaft diameter: 40 Powered tools in all positions X axis Z axis C axis Automatic tailstock chip conveyor

Condition: good (used), Year of construction: 2007, CNC Long Turning Lathe Manufacturer: Traub Machine Model: TNL 12 Control System: Traub Year of Manufacture: 2007 TECHNICAL DATA Headstock - Max. bar diameter (mm) 12.7 - Quality of round material (DIN 671) (mm) Ø Xh9 - Max. speed (rpm) 12,000 Max. turning length / headstock travel - with fixed guide bushing (mm) 130 - with rotating guide bushing (mm) 80 - with programmable guide bushing (mm) 80 C-axis resolution (degrees) 0.001 Rapid traverse Z1 (m/min) 30 Tool turret 1 - Slide travel X1 (mm) 35 - Slide travel Y1 (mm) 38 (-10 +28) - Rapid traverse X1 / Y1 (m/min) 15 - Chip-to-chip time (s) 0.3 Tool turret 2 - Slide travel X2 (mm) 35 - Slide travel Z2 (mm) 50 - Rapid traverse X2/Z2 (m/min) 15 - Chip-to-chip time (s) 0.3 Tool drive for tool turret 1 and 2 - Max. speed (rpm) 8,000 - Tools max. (number) 2xG - Clamping diameter for drilling tools (mm) 0.5-7 Counter spindle / front tool holder - Max. bar diameter (mm) 12.7 - Max. longitudinal travel 23, 24 / Xg (mm) 140 / 228 - Rapid traverse 23, 24 / X3 (m/min) 30 - Tool holders (number) 4 - Max. speed (rpm) 12,000 - C-axis resolution (GSP) (degrees) 0.001 Rear tool holder, driven / fixed - Z-axis travel with work spindle (mm) 80 - Tool holder diameter (mm) 20 - Tool holders (number) 3 Rear tool holder (X4 axis) - X4-axis travel (mm) 39 - Rapid traverse speed (m/min) 15 - Tool holder diameter (mm) 28 - Tool holders (number) 4 Tool drive for rear tool holder (with X4 axis) - Max. speed (rpm) 10,000 - Driven tools max. (number) 4 - Clamping diameter for drilling tools - Driven (mm) 0.5 - 7 - Non-driven (mm) 0.5 - 10 Dksdpfszr Uvhjx Acqjr Coolant system - Pump pressure, single-stage (bar) 3 - Tank capacity (l) 180 - Delivery rate (l/min) 40 EQUIPMENT FEATURES - Chip conveyor - Bar loader FMB Minimag 18 - High-pressure system - Fire extinguishing system Subject to change and errors in technical data and specifications.

Condition: used, Year of construction: 1995, Technical details: turning diameter: 480 mm Dksdpfx Acezn N R Eoqor turning length: 800 mm total power requirement: 30 kW turning diameter over bed slide: 240 spindle bore: 65 mm disc turret: 12 fach rapid travel range: 20 / 10 m/min weight of the machine ca.: 4,5 t dimensions of the machine ca.: 4 x 2,2 x 2,1 m with CNC TRAUB TX 8 H C-axis driven tooling, 6 positions 3,5 kW / 4000 rpm power chuck coolant attachment, chip conveyor diverse toolholders *

Condition: used, Year of construction: 2011, controller manufacturer: Mitsubishi, controller model: TX8i-s, _____ Description: Year of manuf. : 2011 Control : Mitsubishi TX8i-s Mainspindle: Technology:Motorspindle Speed:5.000 rpm Power:22,6 kW Torque:180 Nm Barcapacity:65 mm Workpiececlamping:Collet chuck, Hainbuch Spanntop Kombi Axfix Gr. 65 Dksdpfozr Dd Uox Acqor Subspindle: Technology:Motorspindle Speed:5.000 rpm Power:22,6 kW Torque:180 Nm Workpiececlamping:Collet chuck, Hainbuch Spanntop Kombi Axfix Gr. 65 Ejector:Hydraulic with flush Toolcarrier I (X/Y/Z): Technology:Turret with 10 stations Taper:VDI30 Tooldrive:6.000 rpm, 5,5 kW, 17,5 Nm Movement in X/Y/Z:175/80/650 mm Rapid travers in X/Y/Z:20/20/40 m/min Toolcarrier II (X/Y/Z): Technology:Turret with 10 stations Taper:VDI30 Tooldrive:6.000 rpm, 5,5 kW, 17,5 Nm Movement in X/Y/Z:175/80/650 mm Rapid travers in X/Y/Z:20/20/40 m/min Toolcarrier III (X/Y/Z): Technology:Turret with 10 stations Taper:VDI30 Tooldrive:6.000 rpm, 5,5 kW, 17,5 Nm Movement in X/Y/Z:175/80/650 mm Rapid travers in X/Y/Z:20/20/40 m/min Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Internal cooling unit with Paperbeltfilter and Highpressure, 80 bar Coolanttemperaturecontrol:Interface for external chiller prepared, Deltatherm Rawmaterialfeed:Barlaoder, FMB SL 80S Finished part removal:Unloading device (NC-controlled) with coneyor belt Oilmistseparation:Electrostatic extraction, LTA AC3001 Further Accessory:Misc. used static Toolholder

Condition: excellent (used), Year of construction: 2015, operating hours: 28,520 h, functionality: fully functional, machine/vehicle number: 6050500, Equipment: documentation/manual, Special equipment: - Air cooler - X-axes with glass scales - FMB Minimac 20 loading magazine with accessories - 2 channels for the loading magazine with feed rods Dksdpfx Acszr E D Noqer - Accessories for converting from long turning to short turning - The machine is collision-free. - The coolant system is included as an accessory. - The second turret has been modified with a reinforced motor for the powered tools from Traub. - The air supply for cooling has been expanded with an air cooler. - Regular maintenance performed by Traub.

Condition: used, CNC turning machine TRAUB, Type TND 400 Serial No. 708, Year of manufacture 1996 CNC control TRAUB TX 8 F Nominal turning diameter: 400 mm Swinging diameter over bed: max. 470 mm Spindle bore in draw tube: 65 mm Motor power, spindle drive: 22 kW Total power consumption: 35 kW Mains connection: 380 volts, 50 Hz - Electronic handwheel - RS 232 data interface - Turret with 12 tool positions, VDI 40 - Includes 8 tool holders, VDI 40 - 3-jaw chuck, Ø 225 mm, SMW Autoblok, Type KNCS-N-Ø 225-65 Includes a large quantity of chuck jaws Dodozacwdepfx Acqjkr - Hydraulic internal expanding cylinder, SMW, Type ZHDAS-130-67 - Chip conveyor, KNOLL, Type 200 S-1/600 - Coolant system - Hydraulic unit (L x W x H 650 x 500 x 1000 mm) Space requirement L x W x H: 4800 x 2000 x 2100 mm Space requirement, base machine L x W x H: 3500 x 2000 x 2100 mm Space requirement, chip conveyor L x W x H: 4500 x 700 x 1550 mm Weight: approx. 5 tons Good condition Machine is ready for demonstration. The internal expanding cylinder for workpiece clamping needs to be repaired.

Condition: excellent (used), CNC machine Traub TNL 26 Djdpfjhlp Sdsx Acqekr Condition used, in good condition Sale to the exclusion of any warranty

Condition: ready for operation (used), Year of construction: 2002, operating hours: 147,007 h, spindle speed (max.): 6,300 rpm, travel distance X-axis: 370 mm, travel distance Z-axis: 250 mm, spindle motor power: 10,700 W, bar diameter (max.): 36 mm, controller manufacturer: TRAUB, controller model: TX8i (64-bit), workpiece diameter (max.): 32 mm, number of slots in tool magazine: 22, number of axes: 10, This 10-axis TRAUB TNK 36 horizontal turning machine was manufactured in 2002. It features a main spindle speed of 6,300 rpm and a counter spindle speed of 6,300 rpm. The machine includes a maximum workpiece diameter of 32 mm and a coolant tank capacity of approximately 360 liters. If you are looking to get high-quality turning capabilities, consider the TRAUB TNK 36 machine we have for sale. Contact us for further details. • 14" flat screen • Additional V24 RS232 interface in the electrical cabinet • MDE interface in the electrical cabinet (machine status and parts counter) • Rigid tapping without compensation chuck • Polyform function for C-axis • Tool monitoring • Main spindle bore: 36 mm • Main spindle drive power: AC 6.7 / 10.7 kW • Main spindle C-axis • Motorized counter spindle • Counter spindle bore: 32 mm • Counter spindle speed: 6,300 rpm • Counter spindle Z-axis travel: 250 mm • Counter spindle Z-axis rapid traverse: 30 m/min • Counter spindle C-axis • Counter clamping pressure device • Workpiece ejector • Increased feed force • Hainbuch Axfix chuck • X2 travel: 50 mm • Y2 travel: ±20 mm • Z2 travel: 100 mm • X2 rapid traverse: 15 m/min Dkodpfxezl S Ems Acqor • Y2 rapid traverse: 15 m/min • Z2 rapid traverse: 15 m/min • 12 driven tools (via central drive) • Driven tool speed: 6,000 rpm • Electronic gearbox • X3 travel: 370 mm • Z3 travel: 250 mm • X3 rapid traverse: 30–60 m/min • Z3 rapid traverse: 30 m/min • 5 driven tools • Tool holder diameter: 40 mm • Driven tool speed: 6,000 rpm • Increased feed force • X4 travel: 73 mm • Y4 travel: ±50 mm • X4 rapid traverse: 15 m/min • Y4 rapid traverse: 15 m/min • 5 driven tools • Tool holder diameter: 40 mm • Driven tool speed: 6,000 rpm • Left-hand workpiece conveyor • Pneumatic workpiece gripper • Gripper jaws: Ø5–8 mm / Ø8–20 mm / Ø20–36 mm • Maximum workpiece length: 200 mm • Maximum workpiece diameter: 32 mm • RESY compact belt filter • Cooling unit • Coolant tank capacity: approx. 360 l • Coolant pressure: 7 bar • Coolant flow rate: 50 l/min • Through-tool coolant: 30 bar • Coolant gun • Connected load: 22 kW Optional equipment, not included: • KNOLL 240S-1/100 hinged belt chip conveyor (discharge height: 950 mm) • Bar feeder preparation (guide tubes Ø25 / Ø36) • Rotating workpiece stop (16 × 16 mm shank) • Brankamp CMS 100 collision monitoring (main and counter spindle) • FMB Turbo 5-42 XT / 3200 "C" bar feeder • Basic set of static and driven tool holders included Technical Specification Through-spindle Coolant Yes Counter Spindle Yes Driven Tools Yes

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Traub CNC turning machine TNC65DGY, TX8I, year of manufacture 2006, serial no. 1191 Description: Y-axis on S1, V-axis, 2 x C-axis, 2 x rotary tool drive, 2 turrets VDI30, Hainbuch BZI65 on main and counter spindle, parts gripper, Hydrafeed Multifeed bar feeder magazine. Condition: Dsdpfezrk I Hex Acqjkr Very well maintained, good condition, maintenance performed. Machine geometry has been checked and corrected/adjusted. Machines can be inspected while powered on – or a video is available. Delivery time: approx. 4 weeks from order.

Condition: used, Year of construction: 2005, Technical details: turning diameter: 275 mm turning length: 900 mm spindle passage: 65 mm power capacity at 100 % load: 25/20 kW Dsdpfxswp D Nbj Acqjkr spindle turning speed range: 1 - 5000 U/min spindle diameter in front bearing: 110 mm c-axis: 1 - 500 U/min. number of workpiece supports: 4 tool turret: 1 x-axis: 290 mm y-axis: 165 mm z-axis: 360 mm b-axis: 360 ° rapid speed: 18/30 m/min number of tools: 2x2 + 2x2 number of driven tools: 2x2 + 2x2 mm toolpiece turning speed range: 8000 / 2000 U/min power capacity: 25% ED 5,8 kW tool taper: TRAUB 60 tool turret: 2/3/4 x-axis: 170 mm z-axis: 600/950 mm y-axis: +/- 60 mm rapid speed: 18/15/30 m/min number of driven tools: 10 mm toolpiece turning speed range: 1 - 6000 U/min power capacity: 25% ED 5,8 kW tool taper: DIN 69880 40 x 63 total power requirement: 95 kW weight of the machine ca.: 16 t dimensions of the machine ca.: 10,0 x 3,5 x 3,0 m with CNC TRAUB TX 8i, Barloader TRAUB Stamag DNH61 / 3000, Main and Sub spindle with C-axis 1 support with B-axis 3 turret supports dust exhauster, coolant attachment with coalescence-seperator and chip conveyor 2 pc. 3-jaw chuck SMW KNCS-N 170-43 2 pc. HAINBUCH Spanntop chuck 40 pc. various tool holder non-driven 6 pc various tool holder driven Spare parts package *

Condition: good (used), Year of construction: 1986, functionality: fully functional, 1 x Multi-spindle lathe Traub TD 26 Year of manufacture: 1986 + Loading magazine Iemca AS 325/32 Year of manufacture: 1986 Equipment: 6-station star-shaped turret Central lubrication Chip conveyor Accessories: Complete set of change gears for individual workpiece machining Dkjdpfx Aozq Dm Tecqsr Complete documentation for the machine and loading magazine The machine can be inspected while powered on, or a video can be sent.

Condition: used, TECHNICAL DETAILS - Number of spindles : 2 - Number of axes : 9 - Number of turrets : 2 MAIN SPINDLE - Spindle power : 6.7 / 10.7 [kW] - Spindle speeds : 8000 [rpm] - Max. bar diameter : 32 [mm] - Z stroke : 305 [mm] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Spindle power : 3.7 / 5.5 [kW] - Spindle speeds : 6400 [rpm] - Max. bar diameter : 30 [mm] - C axis indexing precision : 0.001 [°] - X stroke : 140 [mm] - Z stroke : 300 [mm] TURRET 1 - Number of positions : 10 - Number of motorized positions : 10 - Live tools speed : 12 000 [rpm] - Live tools power : 3.4 [kW] - X/Z stroke : 140/300 [mm] - Y stroke : -40/+25 [mm] TURRET 2 - Number of positions : 10 - Number of motorized positions : 10 - Live tools speed : 12 000 [rpm] - Live tools power : 3.4 [kW] - X/Z stroke : 140/320 [mm] - Y stroke : -25/+40 [mm] POWER SUPPLY - Total installed power : 28 [kW] WEIGHT & DIMENSIONS - Machine floor space : 3870 x 1670 [mm] - Machine height : 2500 [mm] - Machine weight : 6000 [kg] MACHINE HOURS - Number of hours under power : 23240 [h] - Number of working hours : 19500 [h] EQUIPMENT - CNC : Traub TX 8i-p - 3 colors status lamp Dkedpfxjypxqrs Acqjr - Coolant tank : 500 [l] * with high-pressure pump : 3,8,20 [bars] * with paper filtering unit - Chips conveyor - Parts catcher - Parts conveying strip - Predisposition for barfeeder

Condition: good (used), Grinding wheel puller, cup wheel puller, double bench grinder puller, surface grinder puller, cylindrical grinder puller, dressing head, dressing head for grinding machines Quantity: 1 piece available Dedpfx Acjd R Ikdeqokr -Dimensions: 325/130/H135 mm -Weight: 7.3 kg

Condition: ready for operation (used), Year of construction: 1994, TRAUB TNS 65 D / 5-axis CNC turning-milling center TX8D -TX 8D control system -COMPLETE TECHNICAL DATA – SEE PHOTOS -Year of manufacture: 1994 -Hydrobar tool magazine -Tailstock Dkodjzpf I Aspfx Acqer -Various powered tool holders -Three-jaw chuck -Tool holder -Complete documentation Errors and omissions excepted.